The source marked this model as adult content.
Print approx. €11.97–€14.63 excl. taxPreliminary estimate for one variant
- Downloads
- 5,110
- Likes
- 779
- Rating
- 4.94
Counting matching models…
The source marked this model as adult content.
Print approx. €11.97–€14.63 excl. taxPreliminary estimate for one variant
https://creativecommons.org/licenses/by-sa/4.0/ https://it.wikipedia.org/wiki/Piet%C3%A0_vaticana#/media/File:Scan_the_World_-_Piet%C3%A0_(Michelangelo).stl
Print approx. €13.88–€16.97 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €6.50–€7.95 excl. taxPreliminary estimate for one variant
Moses by Michelangelo Repaired for 3d printing. Minor fixes to base and a few holes in mesh.
Print approx. €10.31–€12.60 excl. taxPreliminary estimate for one variant
There is a model of a Statue of David by Michelangelo, in Florence, Italy.
Print approx. €7.86–€9.61 excl. taxPreliminary estimate for one variant
Molang is a cute rabbit from a French animated childrens television series. He is soft, he is fluffy, he is Molang ^.^ UPDATE: his best friend Piu Piu is now included <3 Printing Advice These models were designed for multi-material…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
This is a lowpoly remix of Michelangelo’s sculpture of David from "Scan The World" The .gcode file has fairly robust supports because the model is pretty tall and skinny, but they come off easily enough and don’t leave a mess behind. Feel…
Print approx. €7.70–€9.41 excl. taxPreliminary estimate for one variant
Venus Figure ofLangenzersdorf
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
Print approx. €7.11–€8.68 excl. taxPreliminary estimate for one variant
This is a cover / case for a power supply used by some chinese 3D printer companies. The Modelname of the power supply is LANGRI-12180D. Exact specs of the power supply: Length: 200 mm Width: 100 mm Depth: 42 mm Version 2 is with more…
Print approx. €3.12–€3.82 excl. taxPreliminary estimate for one variant
Various 3D models of bell and arrow signs in various languages, including English, Spanish, Portuguese, French, Italian, German. The file is in Blender and can be opened for editing.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
My original MasterSpool is a little hard to load at the beginning – the filament can slip off and fall underneath the spool. Inspired by https://fab365.net/items/412 (which does not fit fiberlogy refills ), I replaced the flanges on my…
Print approx. €9.80–€11.98 excl. taxPreliminary estimate for PETGSource material: PET
Das ist ein einfacher Löffel. Wir benutzen ihn, um Vogelfutter in ein Vogelhäuschen zu geben. Im Gegensatz zu unserer alten Version ist der Stiel ca. 100 mm lang, die Stielbefestigung verstärkt und der Durchmesser etwas größer. Der Boden…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Designed for Seven Master EB-303 Water Pump AC:220V/50Hz 10W Hmax: 1.2m Qmax: 600L/H From 13mm Flange to 1/8" Thread (for Festo Adapter) Edit : added Adapter with key width 14mm
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
I created this numbering caps that clip on to langos acryllic markers. There's a total of 1000 caps. I Printed them using the following setup to print multicolor prints on my core one without an MMU or AMS system. Prints in PLA without…
Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant
Hello everyone, I'm just wanting to showcase this model. It is a simple thing that can just hang on your door, and I have been working on it since Oct. 5. It has English, braille, Danish and a whole lot of languages from all over the…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET
I liked the model of the Hogwarts castle a lot, but wasn't able to slice it due to net errors. By repairing it with blender I used the chance and added multiple languages for the sign. If you miss your language or I made some mistake…
MICHELANGELO TMNT REMIXED
FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…
The source marked this model as adult content.
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
I want to install a reasonable cable management in my 3D printing cabinet. What is closer than the channels to print. Sneakypoo was so friendly to design one that I just had to enlarge. The STL files are not completely bug free so only…
I reimagined Michelangelo's David through a 3D project, complemented by a column with an Ionic-style capital serving as its base. This endeavor aimed to enhance the presentation and aesthetic appeal of the iconic sculpture. In…
Bust of famous David statue by Michelangelo. “Cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899” Make this the artpiece of your livingroom or office. Scale in your slicer…
I noticed that the IFS wouldn't grab onto the spool correctly when I was using Anycubic filament I had purchased on Amazon. I decided to create an adapter, which seems to work perfectly and hasn't caused any issues after further prints.…
Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
This model is compatible with the lego system.
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
Samy the spectacled snake Ich wollte einen einfach zu handhabenen Brillenhalter den mann gerne anschaut. Und so entstand Samy. Vergesst bitte nicht den Like, wenn er euch gefällt. Ich hoffe Ihr habt auch Spass mit Samy.…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
This is just a more awesome (and challenging) version of the puzzle. It includes weekdays! A very funny puzzle, solving usually takes 10min, ideal during a morning cup of coffee (tea if you are in the UK). Don't hesitate to challenge your…
Erste versuch ein Angelküder zubauen es sollen noch 4x Drillingshaken und 5x Ösen dran. Petri Heil!
This is a little tray that has hands spelling out "I Love You" in ASL. Its a nice size to put on a table or in the bathroom or bedroom or wherever. Print instructions I lowered it so that the base was only about 4mm in height, but that…
I printed mine with a 0.08mm layer height and the threads fit wonderfully, it threads on nice and smooth and tightens well. The external dimensions of the nut are the same as the ones that come on the jacks so you can use the same socket…
This is a remix of: http://www.thingiverse.com/thing:657397 . I edited the original with MeshMixer ( http://www.meshmixer.com ) to make it 3D printable. MosesStatueRemeshed.stl is smaller in data and is easier to slice. I filled the holes…
Thank you for downloads, likes… Enjoy !
This is an accurate recreation of the Prusa MK3 POM TR8x8 and probably other printers (other ones I tried from thingiverse didn't match the lead pitch). I print them in PLA and use them in a MK2 clone I have lying around, they work…
The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.
Dieses kreativ gestaltete und artikulierte „Schlange“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und Macht ihn zu einer unglaublich realistischen Schlange. Viel Spaß beim Spielen mit dieser Schlange. Egal, ob Sie es…
Flange nut for faucets or pool hose/filter (flange ∅ OD = 38mm)
Customizable Duct Flange (OpenSCAD) Create your own duct flange with this highly customizable OpenSCAD script. This design allows for both circular and square face shapes, making it suitable for a wide range of applications. Features :…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
A 120mm fan duct for 90 degrees mount. I use it for my Alveo3D filtration system, but it should fit to any standard 120mm fan. The pipe has 0.8mm wall, which is not super sturdy, but works well and saves filament. See the dimensions if it…
Please leave a ♥ Like if this print was helpful to you :-) A super simple version of a doorstop that features 1-12mm height and 7cm length, making it pretty compact. It will work with most doors. If you need a different size, simply scale…
Print flat side down at a decent layer resolution and you're good to go. Probably wouldn't recommend PLA seen as it might crack under heavier use. Needs some force to screw in first time because I added next to zero tolerance so it's as…
I combined the opener part of the PRUSA BOTTLE OPENER and the lid part of dede67's Beer Bottle Lid into a cool new bottle opener that can be used to open and close bottles with crown caps to protect it from stuff like dirt, wasps or flys…
This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…
Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer. The X-axis carriage is based on a CAD model from Henlor -https://makerworld.com/en/models/171995 The X-axis carriage with an oval hole…
Flange that can be mounted onto a 120mm PC fan and then interface with a 4in" AC duct in order to vent heat and fumes outside. I am using thinkingalaud's original model for the flange that faces outside, but needed to remix their model to…
This is just a very simple flange I created for a shop project, to attach a 4" dust collection hose to a flat object. In my use it was a downdraft table built for a disk sander, but it should be useful in any similar application. I…
It improves unwinding as it improves the spool edge smoothness and stability. Simply put one on each side of the spool. No glue needed. You may want to add a clip or screw at the holes if it fits too loose.
Needs to be printed with 0.1mm layerheight or better. 1 June 2025: added “M65Front_Copal_GENERIC v1” both as STEP and f3d files + “M65_flange” as STEP. for easy modifications.
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
These are used to seal hydraulic flange fittings while performing a repair. They help to keep oil in and contaminates out. There is -12, -16, -20, -24 and -32 sizes available, These should all be able to be used with code 61, 62, and Cat…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
I made this to stick to my friends wall as a gift. 231x275x15mm (Can be scaled up/down for your printer). 15mm and 25mm versions available. Pic was printed in Silver Silk PLA.
This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…
A rose for every woman in the world! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Ironing: Topmost surface only Languages available: Portuguese, Czech, Spanish, English, Dutch, Deutsch, Italian, Romanian, French, Dansk…
My enclosure has a built in fan over an opening. I wanted to be able to control where it vents out to (a nearby window), so I purchased 4in ducting on Amazon . In order to secure the ducting in place, I designed and printed this. It is…
This is a recreation of the Deep Side bar for a Hoffman-style self-spacing frame for a Langstroth hive or similar. This is a design that has been around for a very long time, but there are some variations in how they are made from…
Michelangelo`s eye of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
This is a humorous “Do Not Disturb, I'm Sewing” door hanger with a 2.3" (60 mm) opening for the door knob. This is an easy to print model that doesn't use supports to print. None of the print parameters are critical. It's recommended to…
Hello, please make shure to print the duct port first and measure the inside diameter to scale it with your slicer settings! Its made to fit 150mm hoses / 6 inch duct hoses and clamps In the original drawing the insert has a clearance of…
Simple 4 Inch Duct Interface plate. Originally made to create a Tee box for printer exhaust ducting.
Gopher golang mascot Original author: https://github.com/justinribeiro/go-gopher-model
This model is compatible with the lego system.
A re-shape, with more details, from the amazing work done by 3DWP . Dimensions now are about 83x57x200mm, and i've correct some detail and mesh errors. My model (in photo) it's about 350mm in height, keeping the aspect ratio.
This is a remix of a cute articulated worm from here: Worm Key Ring by Madistudios - Thingiverse substituting its head with a dune worm. Print in place. Layer height: 0.2mm. Infill density : 15-20%. Supports will be required but only at…
DANGER RADIOACTIVE LANGUAGE - F-BOMB TEST RANGE SIGN Category: Signs & Logos
This Dodge Challenger kit card STL model is highly-detailed miniature version of the iconic muscle car, designed for 3D printing and easy assembly. The model would be broken down into multiple interlocking parts, representing the car’s…
Flange for flush mounting 3/4" PVC. I use it for making air flags for quad racing using dollar store pool noodles. Category: Household
I am currently testing a new hive concept (for me) called the AŽ (ah-zha) hive which is a Slovenian beehive design invented by Anton Žnideršič and named the Alberti-Žnideršič (AŽ) hive. Žnideršič named his hive after himself and a German…
Offset Flange Structural Pipe & Fittings Ø 10 / 12 / 13 / 15 / 18mm Collection Slip-on connection Resize to adjust dimension - If you download/enjoyed this file, please leave a like - Thks Update: 27/12/2024 added Single tab version All…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Haare und andere verunreinigungen im Abfluss gehören jetzt der Vergangenheit an. Mit meiner Abfluss-Schlange, die in wenigen Minuten ohne Support gedruckt werden kann, beseitigst du jetzt alle Haar im Abfluss. Ich empfehle den Druck in…
These screws are inspired by DINE6921 metric screws with hex flange head and they have metric fine pitch threads . The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without…
PLA and PETG are fine for these, ABS and ASA can be solvent welded to the pvc pipes with appropriate solvent, use flat head fasteners either construction, wood screws or machine screws.
A very funny puzzle, solving usually takes 10min, ideal during a morning cup of coffee (tea if you are in the UK). Don't hesitate to challenge your friends, because there are roughly 30 to 150 solutions for every day! Add color change at…
These are Code 62 flange plugs for blocking off open ports on hydraulic systems on heavy equipment. They're lightweight, easy to print, and great for keep dirt out of your system while working on it, or stopping oil flow after removing…
Elegoo Saturn 4/4 Ultra Ventilation Flange and Fan Bracket In poorly ventilated areas, resin can become unpleasant and unhealthy. This model allows you to attach a 60x60 fan to the accessory port and quickly vent fumes using a 50mm…
Michelangelo`s eye of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
2020 T- Slot Foot Cap Low Type / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Bassa Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
Updated model uses more affordable counterweights (m16x50 bolts) and raises the weight on the pen holder for less swinging, making for straighter lines at higher acceleration. assembly guide:…
If you have a little quantity of paint or resin to mix, this object is perfect. You just need to add a Ø4mm rod to the center. Maybe you need to adapt the scale of the hole in case of your printer settings for adjustment. Si vous avez une…
I needed a pipe flange with a square base, so I designed one. Glue a piece of plastic pipe into it and mount it to something else. The design is parametric and can be adjusted to match individual requirements. Note: This is not OpenSCAD.…
Newer repboxes don't come with spool holders, but use a slip rod - which has way too much friction. Repkord has a spool roller model to fix that - but it takes way too many screws to assemble, is still rather wobbly without adding even…
This is an Optional add-on to the (Un)original Prusa Drybox. Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox. Note : All the files are also available for 20mm rods as an option. The filename…
David Statue Extrudr Green-Tec Pro white 220/60/0,2, 3 shells, 15% infill
These are Code 61 flange plugs for blocking off open ports on hydraulic systems on heavy equipment. They're lightweight, easy to print, and great for keep dirt out of your system while working on it, or stopping oil flow after removing…