Search results: leadscrew

Sort order

123 models

P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Downloads
73,270
Likes
11,289
Rating
4.85
P
Printablesrinkel

Core One front leadscrew alignment helper

I designed a little leadscrew alignement tool, since I found it difficult to align these with the top when the bed is in lowest position. This one is for the 2 front leadscrews. Move the bed to lowest position , unscrew the trapezoidal…

Downloads
2,495
Likes
628
Rating
4.94
P
PrintablesNicholas Kenyon

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…

Downloads
1,753
Likes
222
Rating
5
P
PrintablesTiffi226

Core One back leadscrew alignment tool / helper

I created an easy alignement tool for the back leadscrew of the Prusa Core One. After I finished my build of the Core One I tweaked the front leadscrews using the little helper from user @rinkel.…

Downloads
1,730
Likes
360
Rating
4.97
P
PrintablesSpamBouncer

3018 DIY CNC: T8 Leadscrew / Anti Backlash / Spring-loaded nut Bearing Block for Y Axis

In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…

Downloads
1,047
Likes
87
Rating
4.67
P
PrintablesJevermeister

Voron V0.2 Z endstop combined with a lower guard to protect the area around the leadscrew

This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…

Downloads
692
Likes
125
Rating
4.89
P
PrintablesInfillTech

Ender 3/Ender 3 Pro Filament guide & Z-Axis Leadscrew guard.

For Ender 3/Ender 3 Pro: Leadscrew guard with integrated filament guide. No need to screw it down, simply slide it over the Z-Axis leadscrew and let it rest there. Note: you may need to deburr the border of the base plate to properly fit…

Downloads
599
Likes
79
Rating
5
P
Printableslanggore

pastamatic leadscrew with added bearing

had issues with the leadscrew binding so i added a place to add an extra bearing

Downloads
577
Likes
41
Rating
4.43
P
PrintablesBrauer

Ender 3 Z-axis Leadscrew Support Guide

I printed this lead screw stabilizer but it did not work correctly for me. The guide pushed the lead screw out a bit too far and the inner race had no clearance for the bearing to spin. I have also raised up the back face to prevent the…

Downloads
487
Likes
52
Rating
4.6
P
Printablesetotheipi

Printable Anti-Backlash fixture for dual TR8 leadscrew nuts

EDIT: Added a hexagonal version which should be easier to grip to tighten. I was using a standard TR8 nut and leadscrew in my CNC machine and found it to have tremendous backlash. The typical solution is to use an anti-backlash nut which…

Downloads
451
Likes
44
Rating
0
P
Printablesvikingbrent

Leadscrew pin retainer for Pastamatic

I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…

Downloads
430
Likes
36
Rating
5
P
Printablessixfiveohtwo

Rod Loris - Tr8x4 (2 start) leadscrew cleaner

The Rod Sloth by NeedItMakeIt is very cool, but my printer, the Anycubic Kobra, has a Tr8x4 leadscrew (i.e., 8mm diam, 2mm pitch, 2-start, 4mm lead.) This is a completely remodeled version of the Rod Sloth that fits this type of screw.…

Downloads
419
Likes
51
Rating
5
P
Printablespingu

Pastamatic Leadscrews for 60mm and 80 mm Spools (e.g. Filament PM, Prusament, Prusa, Redline Filament)

60 mm (tested): Prusament spools (perfect winding) e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section) 80mm Spools…

Downloads
381
Likes
35
Rating
5
P
PrintablesMaxstupo

TR8 Leadscrew Decoupler

This is a Z-axis leadscrew decoupler designed for a TR8 leadscrew. It decouples the XY plane from the leadscrew. The design is similar to an Oldham decoupler, but uses a dovetail to keep the parts together. It's compatible with the Rat…

Downloads
354
Likes
43
Rating
5
P
PrintablesSpamBouncer

3018 DIY CNC: T8 Leadscrew / Anti Backlash / Spring-loaded nut Spindle Head

In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…

Downloads
305
Likes
18
Rating
0
P
PrintablesJan B

Pastamatic Leadscrew and winder spindle for 50mm wide Sunlu spools

This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.

Downloads
297
Likes
31
Rating
4.25
P
PrintablesBugo

Voron Trident Inverted Electronics Z Motor Mounts (motors w/ couplers and leadscrews)

I've remixed the Inverted Electronics & Voron Trident Lowered Z motor mounts so I can install Nema17 motor with coupler and 350 mm leadscrew as I didn't found any with an integrated leadscrew at this length for my self-sourced 300 cube…

Downloads
287
Likes
54
Rating
5
P
PrintablesTurtleCreations

Leadscrew 45 mm for Pastamatic

Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.

Downloads
284
Likes
34
Rating
5
P
Printablesbriguy

Ender 5 Upper Leadscrew Bracket for 608 (Skateboard) Bearing

Updated design to fit a standard skateboard bearing (608). I figure this size of bearing is common enough that most people might have one setting around. Print Settings Supports: Yes Resolution: 0.24 Infill: 20% Category: 3D Printer Parts

Downloads
188
Likes
20
Rating
5
P

TWO TREES BLUER - LEADSCREW STABILIZER AXIS Z BEARING 608

stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA

Downloads
178
Likes
17
Rating
5
P
Printablesb3n3d1k7

Prusa MK3 Leadscrew Nut Adapter

This is an adapter to be able to use a standard leadscrew nut with the Prusa MK3 stock or bear X axis. You will need 2 ~15mm long M3 screws (or the original screws) to attach the adapter to the x-axis parts. Additionally, 2 8mm long M3…

Downloads
160
Likes
22
Rating
4.67
P
PrintablesMazaaFIN

Smooth X-axis for Prusa i3 with Leadscrews

NOTE: X-MOTOR.STL and X-IDLER.STL are made for 22mm spacing UPDATE 15.5.2016 moved X-stepper mount point 5mm to left for 21mm version (X-MOTOR_21mm_WIDER.STL) UPDATE 14.2.2016 made parts with 21mm spacing for Geeetech i3 pro c UPDATE…

Downloads
156
Likes
6
Rating
0
P
PrintablesPavlo Kotula

48mm Pastamatic Leadscrew

This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…

Downloads
153
Likes
16
Rating
5
P
PrintablesHarris

Core One sloped leadscrew covers / debris shield

Glaxy Black PETG used with 0.1mm layers - the parts are so small the print takes no time and they are very visible so good to have a nice finish. They are a nice press-fit.

Downloads
143
Likes
25
Rating
5
P
PrintablesRon McDavid

Pastamatic adjustable leadscrew pin

I was not happy with the amount of backlash in the leadscrew block on my respooler. So I modified the stock block by adding a threaded hole. You will need a M6 setscrew around 10 - 20mm long. You will also need to drill a hole in the…

Downloads
132
Likes
9
Rating
5
P
Printablesdjos_1475

Anycubic Mega Zero 2nd Z Leadscrew Mount

This is a Remix - the various versions are: v8 = 2 Point Mount (The simple option) v14 = 3 Point Mount (now with a bigger cut-out for the 3rd wheel bolt) v18 = 3 Point Mount with extra Z height clearance for Z-Screw Anti-backlash nuts &…

Downloads
130
Likes
37
Rating
5
P
PrintablesClough42

Lathe Electronic Leadscrew

I am developing an electronic leadscrew for my lathe, which is a device that replaces the change gears with an electronic controller and a motor. This project is a repository of the brackets, pulleys, control panel parts and reference…

Downloads
129
Likes
24
Rating
0
P
Printablesxorvious

Creality K1 Leadscrew Z Adjuster

First model! I noticed that my K1 had vertical play in the rear Z leadscrew, appx 1 mm. It didn't seem to effect my prints much, but there is for sure the possibility of movement during a print. I had no luck adjusting it via the grub…

Downloads
127
Likes
39
Rating
0
P
PrintablesVanessaE

X/Y/Z upgrade kit for acrylic Prusa i3 clones (based on TR8 leadscrews) - No more zip ties!

This is a remix of Whitehawk2000's X/Z ends for leadscrews on the Prusa i3, plus a new X carriage made from scratch, and a new Y carriage remixed from molak34's well-tested design, all designed to mount their bearings with proper clamps…

Downloads
124
Likes
8
Rating
0
P
PrintablesTakuya

Voron V2 Leadscrew Z Conversion

WIP: It works, but try at your own risk This is a Voron V2.4 Leadscrew conversion. it uses well leadscrews on Z instead of belts. Includes all files needed. Includes Y endstop mount in A Drive for Umbilical conversion Requires cutting of…

Downloads
107
Likes
27
Rating
5
P
PrintablesVedarinis

WobbleX for TR8 leadscrew anti Z wobble whole assembly unit with additional magnets

It's a compilation someone's else designs, modified to be used instead of TR8 leadscrew nut (utilizing the same nut as well). I have added additional 6x3mm magnets (I strongly suggest using the best possible grade neodymium magnets,…

Downloads
106
Likes
16
Rating
0
P
Printablesthr333ddd

Anycubic i3 mega - Yet another Z axis anti wobble stablizer bearing leadscrew

12.4.21 I've added a test print showing the layer surface, so it doesn't look like any Z banding is occurring. I also look at the factory endstop switch and there's no clearance for the bottom mount for it. The Z endstop switch will have…

Downloads
106
Likes
7
Rating
0
P
Printablespaw3D

Core One Dust Proof Leadscrew Covers (Remix)

The cover press-fits firmly into place and slopes away from the leadscrew guiding any debris away from it. To form a dust-proof seal against the leadscrew some foam is glued to the cylindrical surface of the cover's center hole. CA glue…

Downloads
105
Likes
36
Rating
5
P
PrintablesAlan Canfield

Anycubic Vyper Leadscrew Stabilizer

Bought a used Vyper with a broken leadscrew support so i decided to replace it using the intact one as a reference. Its pretty minimalist so it does have the snap on cover like the original but little collar that goes around the top of…

Downloads
102
Likes
20
Rating
5
P
PrintablesRESTLESS DESIGN

Leadscrew Protector

This quick and easy to print part can be mounted on the right side z-axis stepper motor to protect the leadscrew. The fan that cools the filament once is its layed down, can blow small pieces of filament to the right side leadscrew and…

Downloads
97
Likes
10
Rating
4
P
PrintablesKeno0355

LeadScrew Brace Retrofit-Remix

There are several versions of the rewinder. Where the original bracket does not fit, the corresponding support is missing. I adjusted the thickness so that the holder now also fits this rewinder with the support (above the "m" from…

Downloads
94
Likes
8
Rating
0
P
PrintablesRafa

Ender 3 Dual leadscrew Mechanical Gantry Alignment Endstop

Just print 2 of those and snap on the top of the printer. Now you can bump the gantry on them to mechanically align your gantry. You will also need 1 T-Nut and equivalent screw. Ideal for Enders with 2 leadscrew but just 1 stepper driver…

Downloads
90
Likes
12
Rating
5
P
Printableswitem

2040 T8 Leadscrew / Anti Backlash nut holder

Holder for T8 anti-backlash leadscrew nut with holes for 2040 profile

Downloads
83
Likes
9
Rating
0
P
PrintablesCryolupus

Tr8x2 Leadscrew Cleaner; 8mm OD 2mm Pitch 1 start

A cleaning tool for Tr8x2, 8mm diameter 2mm pitch 1 start leadscrews. Note that these are not the same as the ones usually on 3D Printers, which are 2mm pitch 4 start. Printed mine out of PLA, 2walls, 15% gyroid infill, 0.2mm layer…

Downloads
82
Likes
25
Rating
5
P
PrintablesFuganater

Voron Legacy Leadscrew block for POM nut

Made so you can use a POM leadscrew nut on the VORON Legacy Z leadscrews.

Downloads
82
Likes
18
Rating
0
P
PrintablesClockworkIdiot

E3NG 1.2 - Flexi Inserts for Stock Leadscrew Nuts

Reuse your stock two-screw leadscrew nuts with the Ender NG. Features an additional bump to stop the nut flange binding on the spring part of the flexi

Downloads
78
Likes
23
Rating
5
P
PrintablesYell

Trident R1 motor spacer / standoffs for leadscrew coupler V2

This one here is or Trident R1 only R2 is here This is a V2 of my first version which still runs fine in my trident but adds a couple of QoL improvements smaller Z height so there is room to route cables below, also fits nicer with the…

Downloads
77
Likes
19
Rating
5
P
PrintablesRabid Badger

Leadscrew Vise

A useful project vise, capable of holding work securely with minimal flex. The jaws are 75mm wide, 30mm tall, and max opening is 100mm. Requires the following hardware: 1x 8mm, 2 start, 4mm pitch lead screw & matching brass nut 12x…

Downloads
76
Likes
15
Rating
0
P
PrintablesRobert Graf

Pastamatic Leadscrew for 70mm, 100mm & 115mm Spools

My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of…

Downloads
69
Likes
7
Rating
5
P
PrintablesMijoni

Ender 3 Z-Stepper motor bracket. Works with dual leadscrew

A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 50-100 Filament:…

Downloads
69
Likes
12
Rating
0
P
Printableschriswal

ANet A8 Printed Leadscrew

This is a Test for a 3D Printed Leadscrew This is a square thread. It is a flat screw you have to print it flat and diagonal on the surface you need http://dkprojects.net/openscad-threads/ to compile the scad files i used candle wax for…

Downloads
69
Likes
5
Rating
0
P

Leadscrew Nut Support Block

Pillow Block for a 8mm leadscrew nut with two variations Category: 3D Printer Parts

Downloads
67
Likes
7
Rating
0
P
PrintablesMFBS Design

Gold Series Leadscrew guides for use with VenterMechs on Rat Rig V-Core 3

Please note my newer style ones for mounting in V-Core 3.1 stylised holders can be found here: https://www.printables.com/model/1552963-wiggle-woggles-for-lead-screw-guides-for-all-rat-r Leadscrew guides compliment VenterMechs, Wobb e…

Downloads
58
Likes
12
Rating
0
P
PrintablesIgnacio Gabriel

Powder Detergent Dispenser with TR48x12 Leadscrew and Dual 6000 Bearings

Imagine never spilling powdered detergent again or guessing how much you're using. This compact and durable 3D-printed dispenser gives you full control and consistency with every load of laundry. This system is built around a TR48x12 ISO…

Downloads
56
Likes
19
Rating
0
P
PrintablesTritschi

Update of LeadScrewBlock of Pastamatic - Filament Spool Winder for Bambu Lab and Others

As add-on of my earlier posted a motorized winder which was a remake / remodel of @GekoPrime's spooler I now add a revised LeadScrewBlock. All of these files are also in my original post:…

Downloads
56
Likes
12
Rating
0
P
Printableseried

Prusa i3 Leadscrew Z axis upgrade

Upgrade for the Hictop clone of the Prusa i3 Print instructions I am building a HICTOP prusa i3 printer but the z axis wobble a lot, so I decided to get the threaded screws straight https://www.youtube.com/watch?v=dy64oB7fG-k but this was…

Downloads
55
Likes
2
Rating
0
P
PrintablesJesco

HyperCube Evolution Leadscrew Guide

Leadscrew Guide for the HyperCube Evolution. It fixes the TR8 leadscrew in place with a 608 bearing at the top to improve z layer consistency. This version has a screw-on plate to really fix the bearing in place. I run a non-enclosed…

Downloads
53
Likes
5
Rating
0
P
PrintablesMacNite

Redesigned parts for Vulcanus V1 - Leadscrew and Belt Tensioner

I wasn't quiet satisfied with using M8 screws for the z-axis, so I altered the mount to accept an TR8 leadscrew. I also changed the design of the belt tensioner mounted to the x carriage. Print instructions Category: 3D Printer Extruders…

Downloads
51
Likes
4
Rating
0
P
PrintablesSomePrints

Ender 7 Triple Leadscrew Mod

This is my attempt at a z-axis triple screw mod for the ender 7, when used with my other mod (will be uploaded soon) to convert the rear mount to linear rails it should lose little to no height in the z-axis. You will have to rotate some…

Downloads
49
Likes
15
Rating
0
P
PrintablesLMaker

Leadscrew support

Material´s list 1 unit -- Bearing 688 2RS 2 units -- T-Nuts 20-M3 2 units -- Screw DIN912 M3x20 2 units -- Screw DIN 7991 M3x10

Downloads
45
Likes
16
Rating
0
P
PrintablesJimjo

Mini Lathe LeadScrew Hand Wheel

WARNING! In order to use this modification the gear guard must be removed! in addition your hand will be close to the gears and spindle! Use at your own risk This handwheel replaces the last gear in the change gear set to enable manual…

Downloads
44
Likes
9
Rating
0
P
PrintablesDuane

Leadscrew Greaser - No Mess

Print with supports and clean up the hinge pin faces, Use a piece of filament for the pin heat and mushroom the end over over with something. There are versions for pipe sizes 2.2 - 3.0mm but you w8ll need to clean up the hole with a dril…

Downloads
42
Likes
13
Rating
0
P
PrintablesNickolas

5mm axis to M8 leadscrew coupler

This is custom coupler for M8 threaded rod, the rod should be screwed into the coupler so it shall have a perfect fit.

Downloads
41
Likes
7
Rating
0
P
PrintablesBinary

Leadscrew Guard STL format

Design is still fully @DustinFickert_397996 but creator has gone completely awol and only has a buggy 3MF file uploaded.

Downloads
40
Likes
7
Rating
0
P
PrintablesK2_Kevin

Z-axis LeadScrew Cleaning Tool

Using the Easy Lead Screw Cleaner Stuff/lay small amount (two layers) paper towel or sponge in the cavity. Add IPA and clip it to the lead screw. Move the z-axis up and down. NOTE : I would suggest printing two or three and doing all rods…

Downloads
40
Likes
6
Rating
5
P
PrintablesDmytro Sichkar

Pastamatic Leadscrews for 120 mm Spools

This is a remixed model designed for 3kg spools with a width of 120mm. Useful for Creality Space Pi Dryer Plus.

Downloads
38
Likes
0
Rating
5
P
PrintablesAdam L

Klicky/unklicky dock for VCORE-3 integrated into MFBS's Gold Series Leadscrew guides

This is a mixup of 3DP and Me's upcoming Klicky dock for EVA3/VCORE-3 with MFBS's Gold Series Leadscrew guides. Remix of https://www.thingiverse.com/thing:5063532 and an unreleased dock for the VCORE3 (will update this when released). I…

Downloads
38
Likes
8
Rating
0
P
PrintablesChip

Prusa 22mm to 25mm Leadscrew nut drill template

The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead. This template is use to drill 2 extra holes on standard 22mm nut so you can mount it on the stock(or bear) X axis. Use 3.2mm drill bit is…

Downloads
37
Likes
5
Rating
0
P
Printablesbbandi

Prusa i3 mk2 x-ends for 22mm leadscrew nut

I've modified the prusa i3 mk2 x-end parts to fit the 22mm brass leadscrew nut, easily available from aliexpress, even integrated to steppers. These are similar designs: https://www.thingiverse.com/thing:1920972…

Downloads
37
Likes
1
Rating
0
P
PrintablesJustin B

Z Axis Leadscrew Knob

This is a completely redesigned z-axis leadscrew knob for the discontinued Type A Machines Series 1 3D Printer. It has the Type A Machines logo on the top, solid hub to hug the lead screw, and a more aggressive design for grip as well as…

Downloads
37
Likes
3
Rating
5
P
Printablesthomasmitschke

Leadscrew Adapter for Prusa i3 Mk2 X-Ends

This is a adapter for x-end-idler.stl and x-end-motor.stl from Prusa's Github page to fit a normal leadscrew into the holes. I've also included the Fusion360 file for modding it by yourself. Category: 3D Printers

Downloads
36
Likes
4
Rating
0
P
PrintablesGongdihakseng

MZ3D's Bottle cutter (leadscrew version)

Original model by and many thanks to @MZ3D. Bottle cutter with scalpel knife blade, remixed to fit common leadscrews. I also added KRW for my friends out there, along with some other coin varieties.

Downloads
34
Likes
6
Rating
0
P
PrintablesYoshi2oo8

Rook [Legacy] MK1 Clamped Bed with Leadscrew

Remix of Kanrogs Clamped MK1 Bedframe to Upgrade a Legacy frame with a single Leadscrew on either side

Downloads
34
Likes
2
Rating
0
P
PrintablesPsych0h3ad
Downloads
33
Likes
14
Rating
0
P
PrintablesCatGunStudio

Ender 3 v2 leadscrew guard PTFE

Remix Source Files search is currently broken. Mixed from: https://www.thingiverse.com/thing:4318767 https://www.thingiverse.com/thing:3303562 I liked elements of both of these. I did not like not screwing down the guide as done in…

Downloads
33
Likes
8
Rating
0
P
Printables1CM69

Anycubic Mega Zero 2nd Z Leadscrew Mount

This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to a dual Z axis configuration. I have also included the stepper bracket as mine was modelled using a thinner than the…

Downloads
31
Likes
2
Rating
0
P
PrintablesDuckferd

Creality T8 Leadscrew Nut Adapter

If you have a mix of Creality and other printers, you might end up needing different type of T8 leadscrew nuts to cover them all. This is a very simple adapter that adapts a Creality style 2-screw trapezoidal nut into the commonly found…

Downloads
30
Likes
2
Rating
0
P
PrintablesDanAndersen

Sunlu S8 Shims to use Ender 3/CR10 Z-Axis Leadscrew Top Mounts

To make a nice top mount for the Sunlu S8 Z-Axis Leadscrews, you can use the typical Creality Ender3/CR10 Solid mounts, when you add a little spacer. Print this one twice and you are good to go. Mine are:…

Downloads
30
Likes
1
Rating
0
P
PrintablesChip

22mm to 25mm Leadscrew nut adapter

This version is outdated, use this drill template : https://www.prusaprinters.org/prints/115469-prusa-22mm-to-25mm-leadscrew-nut-drill-template The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead.…

Downloads
28
Likes
7
Rating
5
P

Ender 3 Part/piece/leadscrew

remade from original part. not fitted yet but looks like it will fit

Downloads
28
Likes
3
Rating
0
P
PrintablesMFBS Design

Sturdy leadscrew alignment tools for V-Core 3

These are sturdy leadscrew alignment tools for the Rat Rig V-Core 3 printers. The rear guide is only for use with the earlier V-Core 3 printer with the offset lead screw. These are not required for lining up the leadscrews on V-Core 3 or…

Downloads
27
Likes
4
Rating
0
P
Printables1944GPW

Myford ML7 lathe leadscrew handwheel pointer

As an option. the venerable Myford ML7 lathe can be fitted with an engineering handwheel on the right-hand end of the leadscrew, a very useful improvement. With the carriage lever engaged, one turn of the leadscrew moves the carriage one…

Downloads
25
Likes
3
Rating
0
P
PrintablesJason H.

Tronxy x3 Z leadscrew stabilizer bearing support

I needed a stabilizer that would house a 16mm bearing, as that is all I had. So I designed these instead of using the 22mm 608z skate bearings. The bearing is a 16x5x8. Enjoy. Print Settings Printer: Tronxy X3 Rafts: No Supports: Doesn't…

Downloads
25
Likes
3
Rating
0
P
PrintablesSpeaka

Hypercube Z Leadscrew Mount for 2020

Based on the Hypercube 3D Printer from Tech2C (https://www.thingiverse.com/thing:1752766) Additional fixation at the 2020 extrusion for the z leadscrew. Insert a 608 bearing and and a clamping ring like this one to reduce force on the…

Downloads
25
Likes
6
Rating
0
P
PrintablesRuffle

Lulzbot Taz 6 leadscrew indicator

A simple pair of indicators that show that your X-Axis is still lined up. Fit the indicators[1] - make sure that the one on the leadscrew is high enough to avoid clouting the fixed indicator. Don't snug down the one on the leadscrew yet.…

Downloads
24
Likes
8
Rating
5
P
PrintablesPrivate Butts

Prusa i3 Rework Leadscrew Z-axis with Delrin Nut 4 Hole Remix

This is a re-upload from my Thingiverse page now that I'm locked out of it. Originally published March 30, 2016 to https://www.thingiverse.com/thing:1453325

Downloads
24
Likes
2
Rating
0
P
PrintablesTickTock

Pastamatic leadscrew for double-wide spools

I make extra-wide spools by combining two Prusa Spools ( https://www.printables.com/model/1629497-prusa-spool-doublewide-adapter ) and made this leadscrew to use in my Pastamatic winder for them. You will probably be interested in this…

Downloads
20
Likes
2
Rating
0
P
PrintablesJonas_Lug

RS Pro 12mm Leadscrew Nut Housing Bracket

This housing bracket is fit for the RS products: 8625329, 8625323, 8625332 and 8625335 It is designed to use M4 bolts and M4 heat-set inserts.

Downloads
19
Likes
3
Rating
0
P
PrintablesDuhnel

Anycubic Mega Zero 2 left Z Leadscrew Mount

Remix of djos_1475's MZ1_Z_Mount_v14.stl with adjusted holes to fit a different type of lead screw (see imag)

Downloads
19
Likes
3
Rating
0
P
PrintablesGabriel Cabello

Rook2020 leadscrew bed

this platform is made for a 120mm bed, the M4 nut hole at the bottom left is for an optional endstop that I used in my build, is a very stiff bed and uses almost the whole interior volume of the printer, the top pic shows how the rod…

Downloads
18
Likes
6
Rating
0
P
Printablesdthoi99

T8 Leadscrew Bracket for Taig Lathe

I whipped up this bracket to replace the rack and pinion drive that the lathe originally comes with. I didn't mind it, but it was too fiddly to feed slowly to get good surface finishes. This is much better. This bracket uses the holes…

Downloads
18
Likes
4
Rating
0
P
PrintablesMortarArt

M-Bot, 400x300x400mm Build Volume, 3 leadscrews, Titan Aero direct drive, IR-bed leveling

Most of the below is just for historical record. This is a deprecated design. See links below. M-bot v.2; https://www.thingiverse.com/thing:3045974 M-bot v.3; https://www.thingiverse.com/thing:3134348 M-bot v.3.5;…

Downloads
18
Likes
3
Rating
0
P
PrintablesJohetan

Vcore 3.1 Leadscrew Guide for 608 Bearing

Modified to take "Skateboard" bearings for easy sourcing.

Downloads
18
Likes
1
Rating
0
P
PrintablesSupraGuy

Leadscrew 3D Printer 4.5mm Acrylic Frame

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8edHfJSzcEW Tinkercad file is a virtual assembly, a couple iterations behind the .stl and .svg files included. You will need 3X the "Leadscrew Small Y…

Downloads
17
Likes
4
Rating
0
P
PrintablesDajomas

Ender 5 Plus - Bearing mount to leadscrew mount adapter

*** Notice *** This model will be discontinued. After many tries, I have decided on a different route which can be found here: https://www.printables.com/model/484885-ender-5-plus-build-plate-mounting-bracket-for-dual As I went from…

Downloads
17
Likes
1
Rating
0
P
PrintablesHugo

X-Motor - Leadscrew - More motor clearance

Modified the motor end to add some clearance to the motor that was touching my RAMPS. I also added some clearance for the screws that attach the lead screw bolt. Source here:…

Downloads
16
Likes
1
Rating
0
P
PrintablesAndrew Gern

Helical geared leadscrew for Pastamatic with added bearing

Just combined a couple of models to get the result i was looking for

Downloads
15
Likes
1
Rating
0
P
PrintablesPreischl 3D

Rat Rig Z-axis leadscrew fixation

Rat Rig Z-Axis Leadscrew Fixation Hey maker! 👋 Keep your Rat Rig Z-axis leadscrews secure and adjustable with this simple bracket set. Features: One bracket per leadscrew. Flexible adjustment for height and position. Attaches easily with…

Downloads
15
Likes
4
Rating
0

Wall-Mount Stepper Holder (Leadscrew Variant)

Designed to use standard #8 flat head screws, these wall mounted brackets hold stepper motors with a lead screw attached. Great for your workbench to provide quick access to spare parts, plus they look great! We typically print them in…

Downloads
15
Likes
2
Rating
0
P
PrintablesMiklos Verebi

Ender 3 Leadscrew mount MGN12C

I made a mount for Ender3 pro for MGN12C. I highly recommend it for dual screw setup for strong, stable x axis Recommend print from ABS. Print settings: 0.2 layer height 4 walls, 4 bottom- 4top Needed M3 bolts, and heatset inserts

Downloads
14
Likes
5
Rating
0
P
Printablesemertonom

Fractal Vise Middle Body for Round Leadscrew Nut

I printed out TeachingTech's Fractal Vise and bought all the hardware for it, only to realize that I'd made an oversight--their model calls for a different kind of leadscrew nut. Rather than try to obtain the right nut, I just decided to…

Downloads
14
Likes
2
Rating
0
P
Printablesreefab

8mm leadscrews X-ends for MendelMax 1.5 with wobble isolator

Made for 8mm leadscrews and lm8uu. Check the specification image to see if the leadscrew nut matches yours. The idler is designed for a GT2 belt, meaning dual 624 bearings on a M4 bolt instead of the usual 608 and M8. Source and…

Downloads
14
Likes
1
Rating
0
P
Printableselectronlove

Prusa Wilson TS 8mm Leadscrew Conversion

Took some time but I finally got around to an upgrade! So for some history - the 5mm threaded rod for the Prusa Wlison TS was so so frustrating so rather than rework it, I built another printer in 2018. And then my first printer sat on…

Downloads
14
Likes
1
Rating
0
P
Printablesedbdii

TR8-4 Z-Leadscrew/motor cover

I switched out my Z-motor setup(motor/coupler/leadscrew) to an Integrated motor/leadscrew I thought I needed a dust cover for the motor/screw junction, so here's my attempt. I added the Fusion 360 file I printed one in PLA and it spun…

Downloads
14
Likes
2
Rating
0
P
PrintablesNgoc Phi

Anti-backslash for Leadscrew T8

The purpose is to reuse surplus components (if you already have them in stock) instead of buying new ones. You can reuse a T8 leadscrew nut (either pitch 2 or 8 is fine) and a spring with a diameter of 10.5mm. Have fun! The spring should…

Downloads
13
Likes
2
Rating
0