2,749 models
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…
A simple swatch to easily see all the filament you have. Easy way to save a bit of a sample filament for future reference. The swatches are designed to perfectly fit Avery address Labels (1" x 2 5/8") product no 15660. Available here :…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…
test the quality of your prints by printing a cali dog
Bed Level Correction Calibration Model for the Prusa Mk3/S. Instructions how to calibrate, see: https://help.prusa3d.com/article/TPGip0OmaP-bed-level-correction
UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…
I made yet another temperature tower because I couldn't gauge how smaller details were affected with other temperature towers on Thingiverse. Printed in PLA, it only uses about 4 grams of filament. Each section is 10mm tall 4/4/21 Update:…
Calibration + Test Cube 20 Kalibration + Testwürfel 20
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
Print this calibration tool and create little swatches you can go back to and read off the volume (in mm cubed) of material needed to purge a given color change. All 5 colors swap with all 4 of the other colors in each direction. That's…
Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…
25*25*25mm calibration cube for XYZ axes
If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…
A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.
If you simply want a fast way to set or confirm your Z heights, try my QUICK first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . Use these DETAILED files if you are willing to take more time and really dial in…
This is my simple calibration 20mm cube for XYZ axis. Letters are written on sides. If you like this cube, you can give me a like or rate this model 👍 Thank you! Good luck with your calibration!
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
This is a simple 20mm XYZ Calibration cube. I also added a 3DBenchy-style first-layer-squashing test on the bottom of the print. Hope you enjoy using the model! The cube on the photos was printed with 3DJake ecoPLA Brown. You can find the…
Calibration Cube - Furniture knob Simply print one of the two variants (with printed M4 thread or for threaded inserts). Suitable M4 screws are required, the length of which depends on the thickness of the furniture fronts. The print file…
SUPER PINDA 1.5mm adjustment tool 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Only 10 minutes to print. No support needed. Keep in mind : Always recalibrate the Z-live after a Super…
Calibrate your printer before printing large parts! For this, we designed this calibration block that should weigh at least 5.4g, when printed. We recommend printing it and weighing it before you start creating large, heavy and expansive…
Hello, Today I have a 20x20 Calibration Cube for you. It is suitable for setting the ideal size of your print. I succeeded :-)!!! I used PLA/PETG as the material. No need to use supports If you are interested in my work, the links are…
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Another quick test print to test retraction and get a calibration cube in 12 minutes on a Prusa. Measured from the base of the model, the cube is 10x10x10 mm with 1 mm thick walls.
A great bed calibration for that oh so important first layer. Intended for all Ender 3 but feel free to scale it to your bed size.
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
This is basically an inverted standard calibration cube, and prints in about the same amount of time. But this one is hollow to test retraction, overhang angles, and an insanely difficult bridge at the top. The cube measures 20x20x20mm…
Hello 3D-Friends, this is a ready to print gcode for Prusa MK3.5 & MK3.5s to calibrate the k-factor for pressure advance (linear advance). It was created with Prusa Slicer 2.8.1 and this site:…
Simple first layer calibration
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I designed this tool to calibrate the genial "Torque Wrench Handles from 1.0Nm up to 3.0Nm" There is such a tool showed on the fotos, but no file for it added.…
Are you tired of sitting there and messing with calibration for live-Z adjustments? I know I sure am! Every live-Z system involves sitting there and fiddling with a knob manually, and I figured there was a better solution. Now there is!…
This calibration test prints multiple parts in different extrusion multipliers to give you multiple parts to analise the best outcome. Once you are happy with the calibration put the value in the extrusion multiplier in the slicer.…
The calibration cube is a great example for Prusa printers, when you set the first layer so the first print give this.
kostka kalibracyjna do testowania drukarek 3d
Don't want to use your fingernails or scraper to pick the corners of your first layer calibration print off your pristine $35 steel sheet? I added a removal peg that solves this little annoyance. When you are done then just roll the peg…
A lot of people seemed to be having problems with wavy lines across the first layer of their prints due to too hot of temperatures, myself included. So I made this G-Code file in order to calibrate what temp you should use. DO NOT JUST…
Note that these parts were made for the VINCA 6" Digital Caliper, DCLA-0605 , so they likely won't fit other brands or models without modification. Step versions are included to facilitate this. These models are designed to allow calipers…
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
A remix of my original filament straightener model that is created for the minimum filament requirement contest. I hope it works for everyone!
This tool allows you to calibrate your 3D printer's e-steps. It keeps the filament straight and also guides the depth gauge of a set of calipers, allowing consistent measurements. I've never liked the sharpie and a ruler method as it…
A calibration cube. Tests your printers calibration.
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
It frustrates me when I try to calibrate my e-steps and the filament comes out too bended. With bended filament is too hard to measure with calipers properly and it is something that you want to do with precision. Using this straightener…
Sign: LIBRARY 200x200x2 mm (two colours)
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
Simple and stylish keychain Print orientation: The best result is achieved when using smoothing (ironing) Check out my own models and remixes: INSANEWAVE Also you can buy me a coffee: donation link
X, Y, Z Orientation Calibration Cube with Arrow Stand A great visual reminder of orientation in 3D space for anyone getting into the 3D hobby. Cube size: 30 × 30 × 30 mm Material: PLA Infill: 10% Print settings (Prusa i3 MK3): 0.10 mm…
An enclosure for a Short-Open-Load (SOL) RF calibration kit with BNC female plugs, for Vector Network Analyzers (VNA) such as the NanoVNA. Assembled with solder-type BNC panel mount connectors and M3x12 cap head machine screws. For best…
Free calibration grid for diode and CO2 laser engravers. Tests power (10–100%), speed (100–1000mm/s), line width (0.1–2mm), and greyscale fill in one 200×160mm sheet. HOW TO USE: 1. Open the SVG in LightBurn, xTool Creative Space, or…
Supporti con cuscinetto per asse z. Questi non danno problemi con la calibrazione. I cuscinetti sono i soliti 8x7x22. Vanno accoppiati con i nuovi supporti dei motori i quali innalzano la vite e la barra di scorrimento, di 3 mm. per…
50mm 100mm 150mm 250mm 280mm New step value = (current step value * required size) / measured size
Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…
The unit is mm With the prusa mini printer, make borderless printing.
Easy E-Steps Calibrate for Y Axis 20x20mm just clip it on your x axis, place a sheet of paper on your bed and tape it.. Example: your E-steps are 40 draw a line on Y=150mm messure the line … 144,6mm now calculate your new e-steps 150 x 40…
I made this calibration tower right after I switched to klipper. And boy it makes a difference. It has a little overhang and distance test (0.2mm) too. Dimensions: 20/30x40/50x60mm. Printed on an Ender 5+, BTT SKR E3MINI V3.0, Klipper,…
Om dat mijn vorig klepje voor de schuifmaat wel sucses heeft dacht ik maak er ook nog een ander, voor een ander merk digitale schuifmaat. Groetjes Ludo. Comme ma précédente housse pour pied à coulisse a rencontré un franc succès, j'ai…
Calibration Z: A 3D-printed 3D printing game! Test your friends estimation ability with this competitive 3D printing themed game for up to four players. Rules Setup Each player takes 3-4 “extrusions” (a nozzle and spool connected with…
Inside cover for my Ohaus 5601 Sto-A-Weigh Pharmacy / Apothecary Brass Weight Set was misplaced. So I made this model to replace it. These covers also fit a similar set made by TROEMNER Larger cover is 20x98mm Smaller cover is 13x90mm
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Ein ganz einfacher Calibration Cube.
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. Print instructions Rafts: No Supports: No Resolution: Infill: 15 Filament_brand: Filament_color: Filament_material:
Update January 11, 2022 Thanks for the feedback so far, great to see so many makes! I've optimized the bottom thickness to save some material and it will also print faster. I've also uploaded new versions that are only half as tall for an…
Introducing the Orca Cube! A functional calibration cube — don’t just throw it away; you can store small bolts and screws in it. ;) It's a bit challenging to print it nicely, but with a little calibration , you can do it. It's quite…
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
A perfect simple calibration cube that also tests overhangs with its 45 degree overhanging edges, I've also added a cube with no overhangs if you want. 20mm x 20mm x 20mm 0.2mm layer height and a 0.4mm nozzle 20% infill 100% fan speed…
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
XYZ Callibration Cube 20x20x20 Created long time ago with help of tutorial below but i used F360 instead: https://www.idig3dprinting.co.uk/news/how-to-guides/create-a-3d-printer-calibration-cube-in-freecad/
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
The Voron Design Calibration Cube: a precision tool tailored for optimizing your printer settings to achieve the best results when printing Voron Design components. Designed following a comprehensive set of design principles, this cube…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
Projectvideo: https://youtu.be/IWbeTUQQgZ4 I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs Hinged Calibration Cube: https://www.printables.com/model/74825…
Hi there, long ago i print my first file with my 3D-Printer. The file was a little Test Cube. Unfortunately i didn't found the file anymore so i created a new one by myself. I'm sorry that i can't give a reference. Enjoy and please leave…
This is an OpenSCAD module library for propellers and spinners. See this excellent video by Bruno Antunes on how to integrate this library into Fusion 360. This design models elliptical propeller blades that transition smoothly through…
English below! Eine fortschrittliche Methode zur Überprüfung der Durchflussgenauigkeit Hinweis: Es ist absolut richtig, dass die STL aus 2 Teilen besteht! Bitte einfach den Anweisungen folgen. die Kurzanleitung zu dieser Vorgehensweise…
XYZ Calibration Cube 20x20x20mm
Simple single layer cube to help you tweak your z offset. Print at .2mm Layer height Scale X,Y, if you want it to cover more of the build plate
Print the test Piece → Measure it with your callipers → Input the measured results in the Google Sheet Calculator → Get the results from the sheet with calculated Shrinkage → Input in your slicer → Voilá, perfectly calibrated print's…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
This is a precision 20mm XYZ calibration cube which improves on the typical calcube. There are two issues with the typical cal cube: 1) Hard to make an accurate Z axis measurement because either you have error from the squish of the first…
THE TEST DISC Simple, yet VERY effective way to dial in your Z-offset to perfection. Notice the change in the image. From right to left, as I adjust (Baby Step up/down) the z-offset. Example: I started at a z-offset = -0.98 (which felt…
iDig3Dprinting Calibration Cube < link >
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Flow calibration tool specifically for flexi or articulating 3D prints, like our Spiders. If your Flexi models are fusing together, feel too loose, or it seems like small gaps are being fused, you likely need to adjust your Flow Rate for…
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Versions: V2, 10/18/2022: Fixed inner diameter to match 608 specification. Added extreme tolerances for perfectionists. Unfortunately, "Bearing.stl" is something you can't just download and print. Most of the time it won't work properly…
I designed the cube in the attempt to make a calibration cube gave gave much more information about your setting than just directions. Here's a run down of all the test it has in it Labeled Dimensions to see how your printer/slicer is…
![Calibration Cube [CZ: Kalibrační kocka] [SK: Kalibračná kocka]](https://media.printables.com/media/prints/211029/images/1934973_e67afc1f-8c1a-468f-b588-310b0bd589a2/snimka-obrazovky-2022-05-22-100430.png)
