Ultralight 2gram Glider (print in place)
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
- Downloads
- 52,246
- Likes
- 8,823
- Rating
- 4.59
19,716 models
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…
I recommend heat, bending and curving the flower piece a bit for easier fit. My next hair clip. Previous Bee & Honeycomb Slide Hair Clip is here
Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.
this is just a small box with a lid made in fusion 360. It is great for storing small thing like sd cards or usb sticks. Made by Fabian in fusion 360 and printed with fiberlogy pla.
There are numerous designs out there of clips that secure the lid on IKEA Samla (Filament storage) boxes. But I could not find any that really presses the slightly overhanging lid onto the box to keep it as air tight as possible without a…
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
This is a simple design of box with screw lid.
A reusable holiday gift box printed in PLA. Prints in two pieces, the base and the lid. Change the color for the lid ribbon with a pause and filament swap (built into the gcode file here). No supports needed. The pictured box was printed…
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Attach this to the top of any standard mason jar, and then enjoy sliding multiple coins down the ramp - watching as they accelerate towards the apex of the vortex. Printing Notes: This is an easy print that requires no supports. The STLs…
2 x 2 organizer for mason (Ball) jar lids, both standard and small. Half-size version is 1 x 1.
Printed at 100% scale with a 0.8 mm nozzle, printing at 50% scale with a 0.4 mm nozzle should also work just fine. Lid is obviously not designed for vase mode, just print it regularly :)
This box is inspired by Japanese locking lid tool boxes. This is an ingenious locking mechanism and it is simple yet elegant. Your fitment may vary. Depending on 3D model settings and different filaments, you may have to slightly adjust…
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…
Threads for a standard mason jar lid, built in Fusion 360, fully parametrized, for use in other designs. I couldn't find a fusion360 source file to use in other designs, so i built this to share. It's largely based on the thread pitch in…
This is a screw on lid that turns your standard mouth mason Jars in into a bird feeder. The hanger was made with bailer twine that happened to match my filament color. Forgive the macramé job, I was winging it. Updated: I would suggest…
My take on a silica gel container using honeycomb infill for the top and bottom of the model to get a nice grid of holes. I've included files for the large (180x100x25mm) and small (60x60x15mm) box. Was inspired by…
Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
The pocket business card feeder consists of two parts that fit together and snap into position. Your business cards won't get lost. You can then slide the business cards out of the dispenser one by one with your thumb. The outer cover has…
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…
Intro I love flying wing gliders, but they're very difficult to launch by hand with any significant flight time due to instability at high speeds and typically large aspect ratio. I came across expired US Patent 4836817 for a folding wing…
Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…
I designed this f-clamp holder to store my clamps in the most compact way on the wall. The holder is intentional massive and bulky to withstand the weight and forces that are put on the object. For regular and small clamps, have a look at…
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
For easier printing I removed the Prusa Research logo. Very, very sorry Josef 😀. Note: Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much. Happy printing!
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
The .3mf file has custom orientation & painted supports for the better quality printing.
Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…
Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
This was made to fit on my SawStop table saw, but may work on others. The tolerance is pretty tight. I was trying to have as little lateral play as possible. I've also included a small test print so you can check the fit before printing…
Magnetic fidget slider with satisfying haptic feedback and click. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this lucky charm easy to pocket.…
Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill
This is a fully working, 3D printable camera lens lid for a lens with a 54mm diameter. (If you want another diameter, either remix it yourself (for small changes like 56mm diameter just upsizing the model appropriately seems to work) or…
Our 2023 RAM Promaster Van has 3 cup holders below the console. They are hard to reach and do not hold our mugs. We have a cell phone holder, but not the wireless charger. This model easily slides over the cell phone holder and rests on…
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
The Archimedean solids are the 13 polyhedra that are convex, have identical vertices, and their faces are regular. They don't include the Platonic solids, which have identical faces. All 13 can be listed in Mathematica with the expression…
Human skull model created by direct conversion from CT scans. A world famous doctor (and our good friend) actively working in the field of surgery provided us with her skull for study purposes. The model is created by conversion from CT…
of course it's a yeti paw, bon appetit samozřejmě že to je stopa yettiho, dobrou chuť
A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…
Cute little containers with hinged lid and dovetail groove to combine them to a complete small part storage system. I designed this originally for my beloved girlfriends jewelry but discovered very quickly that these little containers…
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Santa Skulls Tree Ornament. Designed with stable diffusion and blender.
Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”). These lids fit glasses that have a thick glass rim with a diameter of 80 mm, and taper towards the opening (as on the cover picture). The hinge height can be…
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks Now with a straw insert
Hier habe ich Slider u.a. für 2-Wege-Plastikreißverschlüsse 5mm konstruiert. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten eingehakt und dann vorsichtig nach unten gedrückt -…
Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
Just a little QTip Holder with a lid, should be printed in “vase”-mode. My wife wanted such a thing, and because I couldn't find the right one I created one. The lid should be a bit loose for easy opening and closing. Edit 2023-01-01: I…
Universal Can Lid A universal lid for cans of all sizes – 250ml, 330ml, and 500ml. Printed according to the parameters shown in the attached image. Modified/remixed from the original model – https://www.thingiverse.com/thing:6973930/files…
Minimalistic design suitable for precision workshop projects.
Print Instructions Supports or ballast are not required. It is beneficial to have the perfect first layer function of the Prusa MK3.9(S), MK4(S), Core One, or XL. The following settings in PrusaSlicer are recommended: Printer Hardware…
Ptolemaic Period Jewelry : Euclid's Cypher Ring.
Harley-Davidson Street Glide Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
Lukisegler-NG XS e, Update to brushless electric drive Wingspan: approx. 900 mm Fuselage length: approx. 500 mm Take-off weight (LW-PLA): approx. 120 g Controls: elevator / aileron / motor Center of gravity: 8 mm behind the profile nose…
Presenting the Twist Lock Mason Jar Lid, specially designed for the Alternative Jar Lids Contest . This innovative lid embodies a unique twist-to-lock mechanism and, when unlocked, uncovers an array of holes, transforming your mason jar…
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
Reason for redraw Checked with SO who will use it most. She requested it to clamp to the box, so when you pick it up for closer inspection it won't fall off. The slit has two protrusions which creates a distance slightly less than the…
I printed the Woven Heart Container for a gift, but I thought it needed a lid, so I made one! Smooth lid fits nicely and I added a rope style handle which matches the container style. Printing 0.15 mm layer height for good quality/speed…
Just download PrusaSlicer 2.6 , then open the 3MF file. You will be able to click on and change the text. The tag slides together and stays shut with a string or tie. This is to keep people from seeing your info unless it's important.…
Model of glider which Aang used in the series Avatar: The Last Airbender . File .3mf is set with ironing of all upper layers too with a first layer.
A small plastic nose had broken off the battery cover of my beloved, older 300 mm caliper. So I designed a new one in FreeCAD. This is a battery cover for a digital caliper design with a SR44 button cell. This 3D model is as close as…
A scaled-down version of Piney29887's Cat Food Can Cover for the smaller 3oz cans of cat food. Keep that food fresh between meals! Add your cat's name to the lid with the new text tool in PrusaSlicer 2.6!
I don't like seeing the upper parts of the Z-axes lift during Z calibration, so I remade them to be stronger in the style of the MK4. Trust me, they're solid!
Bei mir tummeln sich kleine Vögel auf dem Balkon und ich hatte immer Bedenken, ob nicht mal einer der Chaoten in die Gießkanne fällt und eventuell nicht mehr rauskommt. Gerade weil ich auch schon übermütige jungen Spatzen beobachtet…
Printed with Sunlu PLA+ Infill 100% Prusa MK4S After breaking the original I modeled a replacement parts with the same sizes. Lee Precision SKU: BP5572F Reinforced the ring where the spring is hold. Fits as it is, no need to resize. Note:…
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…
Printed with Filaments.ca TRUE Food Safe PETG - Natural (Biocompatible) Revised 25-10-2023: Updated with a slightly larger diameter and snap-lid profile. Original design showed stress breaks after a few dishwashings. Also includes a…
A simple instance of the classic Bicylinder Steinmetz Solid , which rolls smoothly in two directions. You can print the model in the given orientation with 0% infill and few supports.
Scale it up, scale it down, put it on a bobble spring, print it in vase mode. Prints without support, external or internal.
Recommend printing with 4 perimeters. Examples were printed in PETG (matte black) and Pro PCTG (purple) with 0.20 mm layer height. Snug supports work well. Suggest orienting the part right-side up (opposite from model file orientation).
Washer fluid lid for cars, 55mm diameter, Peugeot Partner, Citroen Berlingo and other models. The lid keeps the washer fluid safe for dirt if you are missing the original lid. Designed to fit direct on filler-neck. Fits well, a bit hard…
This is a remix of the electronics box lid designed by 'the freewheeler'. I love the Apple Mac Pro “Cheesegrater” lattice and thought the electronics box cover would be a perfect place for this. Printed this lid in PLA, Silk and PETG with…
This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.
Improved cashplate for the LOCKCARD Wallet. Between the original sliders S and M in Size. With additional dividers to keep your coins from moving, while still having enough space for your banknotes.
Pin that supports the trunk lid of a Peugeot 208. On the picture there is the original part and the printed version.
This is a 3D model of the Swift S-1 Aerobatic Glider . It has a smooth body, long wings, and a clean tail design just like a real glider. I made this model in Onshape using basic tools like loft and fillet to give it a nice curved shape.…