116 models
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D This is a cool DIY lamp project. The Magic Mushrooms, were intended to be…
Christmas LED lighted house
The Illuminated Floral Easter Egg is a delightful decorative piece that brings a touch of spring indoors. The design intricately combines elements of nature, including flowers, leaves, and a charming rabbit, creating a serene and festive…
Hand out goodies with STYLE during Spooky Season! Leave on display or as fun snack bucket the other seasons. This life sized skull and brain was remixed and designed for good printability and handling when on the go. Adding lighting to…
This had been requested to continue a Mario theme for an Ikea Skadis pegboard, went through a few different options for the lights before finally stumbling across these lights on Amazon ( https://a.co/2cM1ZD1 ). I like how they use AA…
5ft Lighted Stargate controlled by arduino (Just a heads up its a very long print 900+ hours) Not a beginner project. Need an understanding of wiring/soldering. Need a understanding of programming arduino boards to load my program.…
Audi Lighted Logo Continuing my tradition of trying to get rich by releasing free products, here is another design I created. Detailed instructions are not contained in this writeup. However, if enough requests are received, I can make…
This is a lighted lithograph frame that looks like an old style TV from the 1960s and 1970s, even the early 1980s. Since this looks like an old tube TV it makes a great gift for someone that remembers watching TV on one of these. It…
Hawaii, USA (HI) Southeastern Islands Coastline Topographic Map Hawaii, USA Southeastern Islands mountains and coastlines in a dual color topographic and hydrographic map! Part of the USA of Plastic topographic map collection. Unlike the…
I made this staff, it's not perfect but I'm happy with the results. You can make it as-is, or make it even better! I designed the top dome and the inner “cut” for the flashlight in FreeCad, then designed the staff itself in Blender. A few…
The new version is slightly more slim, doesn't throw beams of light to the sides, & the design file is a lot tidier. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following…
lighted sorting hat key ring; hight: 37mm
UPDATE: Version 2 Smoothed (front, rear and jaw) for faster printing / easier post processing and painting / less ringing from extruder smaller detail movements. Bone sutures kept to stand out for depth. Large human sized skull with posts…
I separated these from the original design to make downloads easier. Stargate Atlantis Glyphs, so you can now make an SGA Gate. I designed them to use 5mm LED's for the lights. Category: 3D Printing
Companion piece to A Father's Joy . The sculpture is designed for elegance and functionality. It features a hollow body with a opening in the center, for use as a lamp or vase. The body walls are 1.6mm thick, giving the sculpture strength…
INTRODUCTION This is a 3d printed skull candleholder with eyes that follow you regardless from which angle you look at the skull (except from its back, of course). You can use LED tea lights for illumination See it in action! PRINTING…
My daughter was almost hit by a car last year trick or treating and the only thing that saved her was a pumpkin pale that had a flashlight in it. It was early in the night and as she collected more candy, the pale showed less light, so I…
This is a lithopane holder lamp. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following settings: Height: 125 Angle: 90 Maximum Thickness: 3.2 &Make sure you upload a 4:3 aspect…
This new Iron Man Head remix is awesome for a desktop display! It includes a minimalist stand. It also just happens to fit a 600% Dummy 13 body by Soozafone. This Iron Man Head also includes a unique Eye Lighting Module. (ELM) Update; I’m…
UPDATE July 7, 2024: I've added .stp and .f3d files as requested. ================================================================= I wasn't a fan of the “dump all the player bits in one box” approach to the player trays that come with…
Light-up Christmas church All that's missing is snow. Different versions can be printed. Svíticí vánoční kostelíček Chybí už jen sníh. Lze vytisknout různé verze. Baking paper Glue Revell PLA / PLA+ Nozzle 0.4 Layer 0.2
UT Tower lamp with the number 1 and front clock cut out and lighted. Can use a tealight inside, make your own USB powered LED lamp (like this: http://www.aliexpress.us/item/3256806137191821.html ), or use the version of the base to set…
After searching the internet for a Christmas Star tree topper with color LEDs without any luck, I decided to design my own. The model is one half of a shell that can hold some LED lights. I used Wondershop multicolor LED dewdrop lights 30…
This is a bobble-head Skull toy with bobbling brain action. This toy use a 3D printed spring that supports the brain and makes it bobble. There is a recess in the bottom that accepts an LED tea light. the brain and spring should be…
FR Cette cheminée est dérivée de l’excellent site Hero's Hoard ( http://www.heroshoard.com/inn-and-tavern ) et permet un meilleur effet visuel avec l'incrustation d'une led à effet de flamme. La led utilisée est https://amzn.to/3M0QxFL Ce…
This is a lighted Planet Express logo that I made. See part list below for best settings. Enjoy! USB powered lights used can be purchased from Amazon at the link below. I only used a small part of one of the strands for this project which…
Using a colored LED strip and remote.
I separated these from the original design to make downloads easier. I made the decorative back pieces for the gate by request. (I did not test it as I have my gate hanging on the wall and didn't need them) Category: 3D Printing
UT Tower lamp with the number 1 cut out. Can use a tealight inside, make your own USB powered LED lamp (like this: http://www.aliexpress.us/item/3256806137191821.html), or use the version of the base to set over a LED puck light (this is…
I created a Christmas Tree Topper for my wife as our Amazon one failed after one season. It has 31 APA102 LEDs (dotstar) and an ESP32 running everything. It has 5 animation modes and controllable brightness and speed settings by going to…
Four color print, intended for a Prusa MMU or similar. Which is to say, there's zero separation from the white/blcak/red/blue parts - if they're not joined and printed as a unit you're going to have a hard time getting things to fit.…
This stand was designed to add lights to the original Spiral Vase Rose by lytta . It uses a WLED instance on an ESP32 to drive a single 12 element light ring. The cover is designed to diffuse the output of the light into rose and limit…
Lighted charger logo for Anki Vector Assembled with a little bit of glue Print Settings Printer: Flux capacitor Rafts: No Supports: No Resolution: 0.2 mm Infill: 25% Filament: FiloAlfa Pla Category: Robotics
print the the insert with the designated color the metal ring is a soldered metal wire to have an endless look prepare the hole afterwards and live at your car with a file to fit you screw precisely
100% scale fits a Ravin Crossbow 400 grain arrow shaft. I put fuzzy skin on mine for extra grip and because I am a sucker for that feature.
I was impressed by the Artist Opus model display cases, but wanted something that better fit my space. These are based on a generic 8x10" picture frame that costs about $1 each. You will need to cut the glass yourself for the shelves or…
The “Single Finger Wave” has been downloaded more than any other of my prints, so I added an LED to the waving finger and light diffusers, front and back. The front diffuser (.4 mm thick) is printed just below the hand outline. The other…
A lite Nativity scene assembled and put on an attractive stand
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Illuminate your space with the mesmerizing beauty of our Voronoi Blowball…
This illuminated Christmas ornament is 3D printed using SUNLU black PLA filament, ensuring a sleek and durable finish. The print features five solid walls and 100% infill for maximum stability and light diffusion. The design requires a…
I needed a more permanent method to let housemates know I was in a meeting and can't be disturbed. The idea of an On Air sign was really cool, but none of the ones I've seen really fit my needs. The sign is printed with a transparent PETG…
I created this box to act as a lightbox for Jack Daniel's liquor sign I made, but it could function as a backlight for any opaque object that is the correct size (117mm x 159mm). I print the box and frame with a color break at 1.5mm to…
FAST! Zero infill print with 3 parts. Celebrate the 4th of July with this impressive firework sculpture. You feel in the moment watching the firework go into the air with this lighted piece. I used a blue/white transition filament for the…
I remixed my christmas tree model. I hollowed it out and added a hole in the bottom to insert a light. I hollowed the star and made little light bulbs for it. Again, the star should be printed upside down with supports. And you will need…
A Father's Joy Companion piece to A Mother's Arms . The sculpture is designed for elegance and functionality. It features a hollow body with a opening in the center, for use as a lamp or vase. The body walls are 1.6mm thick, giving the…
I liked Tiques77 4-part Eiffel Tower, and I wanted to create a model like that and with RGBIC LED Lighting. I used CC3D Transparent PETG Filament and that actually printed translucently. If I did again, I'd probably aim for a more…
https://www.buymeacoffee.com/rockyprattastic
Model of the B-DNA dodecamer from 1bna.pdb as cartoon. The H bonds between base pairs are highlighted. Great for discussing the structure of nucleotides and DNA. I made this to use it for teaching Biochemistry and Structural Biology.…
Simple Christmas tree with two different hole sizes for tealights. These are the ones I use 35.8mm https://www.amazon.com/gp/product/B00AEKW3AQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and 37mm…
I'm working on modifying a Judge Dredd pinball cabinet into a virtual pinball machine. I want to re-use the coin door I got with the cabinet (despite it being bent up), and also use the coin return buttons as “add credit buttons” that…
54th Anniversary Project This project uses The Litho Heart 75mm Profile from “Itslith.com “ It can be resized to suit by using the Proportional Resize in TinkerCad or Cura. My original design was for an “11mm Straw Cover” on my wife's…
A Lighted Base for IKEA BEGÅVNING glass dome. A friend asked me for help creating a setup to make a lighted base for a rose to emulate the one in Beauty and the Bast. This is the result, and uses a cheap usb light of Ali Express ( search…
Made this for my Wife (54th Anniversary), It covers the Straw on her insulated cup. She likes them for conversation piece and My Grands & Great Grands Love them. Was Designed in TinkerCad and can easily be Resized as needed. The One in…
After placing my Home Depot lighted candy canes into the ground in the front yard, two of the stakes promptly snapped off. I created this model to replace those stakes with a more robust design. Hope that it helps someone out!
Valentine Lighted with Dollar Store Fairy Lights. Feel Free to Go to TinkerCad Public Files and do Your Thing. I would Enjoy any Pictures of What You Come up With.
A lighted base for the Fibonacci Vase by mnemo80. The light I used is a simple 12 VDC LED puck for under cabinet lighting. It's available in a 3 pack from Amazon : https://www.amazon.ca/gp/product/B01IB6WU5C This model accommodates a 60mm…
zespoda otvor pro 3mm LED, celý stromek je dutý; spodní kmen má 2 perimetry (vnitřní+vnější), nad 40. vrstvu je pak mód vázy 1 perimetr / hole for 3mm LED from below, the whole tree is hollow; the lower part has 2 perimeters (inner +…
Check out my hanging lithophane holder! It would make a great customized gift. The frame lighted by thru a hole in the back and it has a loop at the top for hanging. The inside is shaped to reflect light onto the lithophane. If you print…
This is my first design and upload. This is a batterypowered lithophane box with a dimmer that I designed in Tinkercad. It is designed for a 100x100x3mm lithophane. For the frame I use treesupport. For the lid I use normal support. It is…
*** Designed to print lid with lettering up and without supports *** *** The letters are small enough to fit in the gap, but it may take some “encouragement" (mine was a teflon mallet) *** So I literally have only just got the expansion…
This model is an assembly that consists of different types of parts: Main body parts: Snowman_ensamble_Cuerpo Snowman_ensamble_Bufanda Snowman_ensamble_Cabeza Snowman_ensamble_Sombrero Accesories: Snowman_ensamble_Botones_Cara…
This festive Christmas ornament is 3D printed with vibrant details, featuring intricate snowflake patterns and a reindeer silhouette. It is crafted using SUNLU black PLA filament for the base and SUNLU red PLA filament for the bauble. It…
You can print the letters in colors if your not going to use the Light Bar . If you are going to use the Light Bar I would print in clear filament. Have fun with the spelling of whatever it is you like. I hope you use and enjoy it as much…
After building the TWP with 6x6x9 microswitches, I wanted to redesign the ICP along the same lines, using the microswitch's central pin as a support for the button itself, backlighting with LEDs, and using a 2.54-pitch multi-hole…
This is a small momentary button about 26mm square with space for a single addressable LED. All three pieces print in approximately one hour. Print button with flange facing the build plate, I used support and left it in there. Original…
This is an adapter for a standard 2" metal fence post. It's designed to mate with a ~4" decorative orb much like the one seen here on Amazon . Inside the base, are fittings for a WS2811 LED Pixel . I run a length of 3-strand, low-voltage…
P1S & AMS Lighted Riser and Hinge. To provide better illumination and reactive lighting the riser uses an ESP32-C3 SuperMini dev board and this firmware at https://www.nixies.us/projects/bambulights/ Use a Chrome browser to program the…
The flashing LED is powered by a CR2032 disc battery. The battery is retained with a disc that press-fits into the battery cavity. The LED flashes multiple colors. There are two designs: One with a pin on the back for wearing (shown…
Simple keychain - the enlighted symbol printed with green-illumination PLA Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: PM PLA Multi Category: Signs & Logos
Attach to broom stick to reach way out there to clear the entire truck windshield. Supports universal broom connector with 17.5x5 mm / .69" threads. Or use a 24" wooden paint roller stick for compact cars with limited space. The lighted…
This is a 3D sign inspired by the game SPLATOON. White (or colored) LED strips can be embedded inside the sign and powered with a USB charger block. Any of the cheap USB-powered LED strips that are at least 1 meter long, like those found…
An IKEA Hack and a Remix. Start with IKEA Härliga Glass Dome, and print a number of the things that you like, in this case squirrel pawns, which I use to test filament. I built up a lighted base, printer in a woodfil, lens printed with…
The logo allows minimal light from the LCD screen at night to create a lighted effect
Bring the magic of fast travel into the real world with this detailed 3D-printed Minecraft Waystone! Designed to perfectly fit an electric tea light , it becomes a glowing beacon—a perfect desk ornament or collector's piece for any…
A rechargeable 18650 battery pack forms the core of this set of lighted display stands. The battery pack could definitely be used for other projects too. The first configuration uses various arrangements of lights that are embedded in the…
A customizable lighted menu support for the TOP MOUNT Ace Pro
My wife loves owls for some reason. Yeah, they are cool but something about being able to look behind you without turning your body just aint right. I found this cool black and white print off of Amazon and used that as a template and…
This is a small cabin ornament with a slot in the back and a holder so you can put a small christmas string light into the cabin to light it up. Requires supports to print or really good bridging. MK3s file included with supports.
This game inspired Luminous Ghost is a great and fun addition to your room or office. This has a slot for standard LED strips in the back should you choose to light it. The eye pixels are printed individually to give a realistic 8 bit…
S4 Avant Lighted Logo This was a design I created as a retirement gift one of my best friends (lovingly nick named The Douche, no seriously, lovingly). He had recently purchased an S4 Avant so I found this to be a fitting tribute to the…
The flashing LED is powered by a CR2032 disc battery. The battery is retained with a disc that press-fits into the battery cavity. The LED flashes multiple colors. There are two designs: One with a pin on the back for wearing and one…
Lighted pylon. Te size is made to fit this Leroy Merling solar charged lights: https://www.leroymerlin.es/productos/iluminacion/iluminacion-exterior/iluminacion-solar/iluminacion-solar-con-detector/baliza-solar-tobago-29561.html?src=clk
The mask is smoothed as good as I can. For a good finish, you still have to do some sanding work. The bottom is hollow and will be filled with concrete. After completion, I recommend gluing a fleece on the concrete surface to protect your…
A quick simple wall decor of a comic panel from Nathan Pyle's "Strange Planet" comic series that I made for my wife. All credit for the comic goes to Nathan Pyle and can be seen here: https://www.nathanwpyle.art/ Category: 2D Art
This mountain with the cross on top of it is designed to be placed behind the "Winterhaus Resort", the Battery pack can be placed down below. The moon stander can be set between the two mountain parts, they can be glued together.…
After I made the player trays I thought it'd be fun to make the trays for the base game as well. Used magnets and stuff with 5mm diameter and 2mm depth. Linked below. Magnets:…
UPD2: V2 version for more even tailcap lighting added UPD: thing was tested and works pretty nice. Also added version without holes in case you decide to print with transparent filament. My transparent washer is broken so i designed my…
Needed a small sign that I could press a button and see in the dark. Came up with this simple design. Frosted face is designed to be printed in a clear-ish material to diffuse the light from the LEDs (you can also take a bit of sandpaper…
These stakes are a little shorter than the originals, but should be more durable. I printed with PETG-HF because that's what I had on hand. The stake attached to the green light is the original and the blue light is the 3DP model. The…
Stock washers (bushings) tend to crack but printed with translucent PETG is more sturdy. Tested before on Convoy S2+
Every year we hang our lighted Christmas reef on the door and insert a new set of D sized batteries and at the end of the holidays, we toss the batteries and store the reef for the next year. I have some spare LM2596 step down buck…
My granddaughter specially requested a lighted “K” for her room for her birthday, made by her Pop-Pop. Designed on Tinkercad; Printed with Digital Blue filament, with supports. Back plate mounts with two 12 mm M3 Hex Cap Screws. Interior…
The text was printed with a color change from clear to black when the background outlined the letters. Then it went back to clear. Will be playing with this more going forward.
A 6" fractal pyramid with lamp base. Print the pyramid at 1270% scale for pyramid base measuring 6" square for use with most m75x4 thread lamp bases originally used for Fritz Peppone's fantastic Solar System Lithophane Planet Lamp…
This is a lighted base for 12oz glass drinks bottles, that I made to hold the special edition Nuka Cola Quantum soda from Fallout. Nothing special needed to print, the photos show it printed in a translucent PETG from Polymaker. Link to…
Japanese Chochin Style Paper lantern with a center channel sizes for a 3MM 3V warm LED light. Originally designed as a customization for a book nook.
Created a Lithopane Stand to work with the Bambu Lab Light Kit
PrinceMas Ornament with Lighted Base by RebelTaz Ok... technically, the lighted base is all that is by me. The original ornament belongs to @DirtyFacedKid and can be found here . I extended the ornament down so that it could be slipped…
Some time ago I purchased a small lighted magnifier; the optics were not perfect, but surprisingly good. So recently I decided to purchase some additional units. Unfortunately, while the new ones looked similar, the optics were very poor…
Of the many, many things regarding electronics my father taught me, one of the more unusual was using a phono plug and jack as a "slip ring". While slip rings are indeed commercially available, I thought it would be fun to use his phono…
