165 models
rocBased on the excellent work of "djedje_zr7", my remix mainly provides a "locking" feature to the drawers and some minor improvements. All modifications and improvements from original design: “Locking” feature for the drawers. Now, they…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
Info: remixed original frame 2 part, so it contains holes for M3 nuts assembly result is then more robust and tough no space between 2 frame parts also added eyelet so it can be hanged other original model parts can be reused
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
Simple box for casting votes, polls, or collecting suggestions. Eyelets allow lid to be locked using a U-lock or zipties. Box base is 17.5cm x 13cm, and 17.5cm tall. The slit in the lid is 1cm x 14.5cm. Box needs to be printed bottom…
Print approx. €6.64–€8.11 excl. taxPreliminary estimate for one variant
I builded a pencil cup with a lockable tip for the Kids It's 141 mm high, and 65 mm in diameter. I had the idea myself, however I saw that @Markus_317812 had already uploaded a similar model. Is only fair, then, if I mention him. Besides…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
This is a 3-piece lockable fake book for geology field work on planet Mars.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
Required Material you need 6pcs of 6mm × 2mm magnets Assembly print press the magnets into their slots done Variations: you can adjust the magnet size in the FreeCAD spreadsheet
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
Introduction The Lockable Lens Cap is an unique camera accessory designed to streamline the process of changing camera lenses, particularly in outdoor and travel settings. This lens cap is engineered for photographers who are frequently…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
Use case: Once I had completed the slim 12mm lockable ball joint, I realized how super useful this kind of design is. While the lock is quite strong on the 12mm ball already, I figured there are probably use cases that require an even…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 6 M3x25mm socket head fasteners, 2 Stainless…
A lockable contour gauge to copy/measure arbitrary shapes by pushing the blades against the desired shape and locking the gauge. The shape of the gauge can then e.g. be photographed and uploaded into a 3D CAD program. I used this for…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Lock-style knitting markers. Works well when printed in PLA. I recommend printing with 0.15 mm layer height, but 0.20 mm is probably OK too.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
[ Update 2: I redesigned the cups to make them stackable. You can find version 2 here . Version 1 will stay online in case anybody wants to keep using them.] [ Update 1: Added a snap lid and cups in two more sizes. See below for details.]…
I needed receiver that would allow original Packout accesories with locks like hooks or roll holder.
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
A lockable pegboard rivet for 1/4" pegboard. This is based on similar designs I found on Thingiverse, but tweaked to my liking. Pegboard Push Rivets by Kenneth Stout Pegboard rivet by Jon Sanders I liked the general design of Kenneth…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
Application This GoPro mount fits to my eco system of lockable ball joints, which can be found here: https://www.printables.com/model/370429-generic-lockable-ball-joint Take the ball pan and the union nut from the 18mm eco system folder,…
Modular connectivity with all Milwaukee PACKOUT components such as the organizer cup, pliers rack, hooks, etc
Use case This design was originally done to fix my company ID cart to my trousers at work. I needed to be sure that I do not loose this card, so I decided to come up with an own design that is securely lockable. Feel free to use it for…
Last Christmas, my brother gave me a package of No Mo' Skidz adult wipes. LIttle did he know that 3 months later, we would be facing The Great Toilet Paper Shortage of 2020. I designed this to provide comfort to those using our throne…
Instructions in English, translated with the assistance of ChatGPT. This Lockable Contour Gauge stands out from other models due to its larger size and can be entirely made of PLA. It features a robust locking system and is divided into…
Heyho Update 07.01.2024: Added a version with lower walls so it is easier to access the plates. My girlfriend asked me to print such a tray for her colleague. So here is my version of such a thing. It has a spout so that the small…
READ BEFORE PRINTING! This is a non-commercial print, this means you are not allowed to sell files or prints of this model. ------------------------------------------------------ What is it for? Anything really… It's essentially a box…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE December 31st 2023- Added an optional slightly…
A box is for sure a useful thing! A lockable one is even more interesting! A lockable box that says "I love you" is probably the most wonderful thing in the world!!! 😜 So here's it is! Large format, super easy to print, support free and…
German helmet - Lockable trailer hitch cap
Lockable Milwaukee M12 Battery Holder – For Upside-Down Mounting & Shaky Environments Keep your Milwaukee M12 batteries secure, even in harsh or mobile environments, with this lockable battery holder designed for professional use in work…
Lockable box that holds together with a click system. The box is best printed with 0.2mm or less and is 41mm x 83.5mm x 30mm in size. It only needs support on the box itself on the sliding mechanism. It consists of 2 parts and I uploaded…
A lockable, or latch-able bolt for your outdoor shed, gates, or doors. Suggest to paint the body and the small plate or cover it with UV protectant spray if this is to be used outdoors. Note, I printed it with polycarbonate for strength,…
This is a cover/protection for a blue 16A/230V 1 phase wall outlet (feeder). A 1/4 turn locks the cap. Fastening eyelet for a cord present, so that you do not lose the cap.
So while working on modifying the Open Ball Vise to use fewer metal parts, I wanted to include turntable/lazy susan with it. Prints and works great, though I did sand the ball tracks. Works without lube, but I prefer it lubed, as it's…
Hang heavy equipment on your Honeycomb Storage Wall with this inserts. The insert can withstand forces up to 15 kg and does not detach from the HSW. I have made two variants, M4 and M5. Update: 04.03.2024 nut M3 added, can only be locked…
Completely 3D-Printable Phone-Holder. Parts are designed in a way that you can vary the length and multiple Aspects of the construction. Some of the parts need to be printed multiple times. I recommend to use at least 45% Infill. This is…
This is a low-cost 3D printable joint to be used for mounting assistive technology. The joint allows for 1/2 inch PVC pipes to be inserted in and allow movement in all degrees of freedom. This device is intended to work with other PAMS…
I use to think that floating holes were not possible to print without support. Oh how wrong I was. Print instructions After reading the comments of With_Maltodextrin and most importantly, watching this video:…
An adjustable foot for 20x20mm aluminium extrusion. It works without the TPU ring, but it provides some vibration dampening and some more grip on smooth surfaces. The threaded part in the base piece can be clamped by an M4 grub screw…
For years i've had 12 gauge shotgun ammo but no suitable container to store them in, as i've gotten into clay pigeon shooting some of that ammo has a use but again no suitable container to transport them in. So i decided to design my own.…
Since the most common upper Riser available here did not allow the printer to heat up, I created my own model. The printer can heat up to 50°C without any problems. Use ASA or PETG for printing. Sliders can be with PLA
Lockable Contour & Skirting Board Gauge Concept I wanted to create a Contour Gauge to aid the marking & scribing of Skirting Board Housing joints & similar. I have therefore remixed the original model with an internal support structure &…
For english description please scroll down Komplett over-engineered Sägeschienenadapter für Makita Akkusäge DHS680. Mir war der originale Adapter mit ca. 40 € deutlich zu teuer und zu fummelig. Was du noch brauchst sind 5 Stück…
Needed a M18 holder that was lockable and no supports needed. Also I only wanted 2 screws and not 4 like most I found. Couldn't find one I liked so I deisgned this one. I have designed 2 of them. One for a countersunk screw and the other…
Application This GoPro (action camera) mount is made to fit to my generic lockable ball joint eco system, which can be found here: https://www.printables.com/model/370429-generic-lockable-ball-joint As the inner thread inside the GoPro…
*** Updated version and additional sizes coming soon. *** - I noticed that the original version had room for improvement, particularly with grip strength for heavier pegboard hangers, so I made some tweaks that massively improve how well…
I created this remix to add a notch at the bottom of the rail so that locks on the straps can be used to hold the straps in place firmly Category: Toy & Game Accessories
Put your old physical media racks to use again! This fully parametric drawer generator will generate drawers with user specified dimensions and compartments. It has been programmed to maximize strength while minimizing material and…
Diamond-Painting tray / Behälter lockable / verschließbar → 0.4 Nozzle → 0.2 mm Layer Height → 25% infill → PLA → scale 125% goes very well
Adjustable/lockable ball-joint phone holder for use as a camera mount for Prusa Connect. Fits to any 3030 extrusion, without the need of any dismantling to expose the extrusion ends. I made this for use with Prusa connect with my Prusa…
When reloading ammunition one thing that i find is that i have no place to store my finished rounds, i'd usually reuse the original containers that the factory ammo came in but over time the cardboard falls apart and if the insert that…
After I had completed optimizing my generic lockable ball joint ecosystem, I figured I should do an practical application for it to show how useful it can be. So I made this tripod, which follows a design principle that I had already…
Assembly Position the ring between the two halfs and ball. Align the two halfs notches with the ring notch. The threads on the halfs form an arrow that must match the direction of the rings arrow Press until snap in and turn the ring…
Lockable Profile Gauge Easy assembly! Lockable profile gauge to trace the contour of an object. Print it at a resolution of 0,2 or 0,16, use an infill of 40 - 60 %. Print the elements x 30 times, slide these on to the body, follow with…
As I am a woodworker too I had a need for a lockable bench-dog. In the past I made them from 20mm wooden rods but that was a lengthy job, mainly cleaning the lathe again, and they have the problem to be pretty loose with low humidity and…
Box to store PSP games with a closing mechanism. Can store more than 20 games. The hinge uses two pieces of filament 1.75mm and are inserted during the assembly.
Small model for your keychain, replacement for 1 PLN coin for your cart. This may be screwed into place by one turn. LAST MINUTE Entry for Keychain Tools competition, some fine tuning may be required. Use high details settings ;)
The box was designed to be used with @fechnert's tamper evident lock remix (to be printed with 0.4mm nozzle max!). Inner dimensions: H 174mm x W 144mm x D 77mm The lid in my model has to be glued together, because I wanted the letters on…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are some ear savers that…
This is a lockable pencilcase using a spinning disc with a peice that runs through a track in the case. Assemble needs glue and a steady hand. Assemble in 4 easy steps: Take the cover, the disc and the circle. put the disc inside the hole…
A treasure chest that can fit 40 switch games, 6 micro sd cards, and a big area for other items like bigger sd cards, usb stick or other adapters. I can even fit two joy cons side standing up.
I loved the original design of this tool , though i found myself nervous while using it, especially if it has been greased well, that it might loosen accidentally. I have modelled on an external locking washer to prevent this from…
Lockable rugged box. Inner dimensions are 90x156x46mm. Fits polaroids nicely. The lock i used is intended for mailboxes ( HORNBACH link ). The hinges have to be pressed into the socket. It has to click into place. After that you can…
As said in the description, this model is a lockable two-way sliding box. Before explaining the mechanism itself let's begin with the general dimensions of the finished assembly: The set it's composed by two pieces: The case that acts as…
No support needed. Except of the tiny vice head who may need a skirt. This part can also be glued to it's screw. I printed my prototype in 0.2mm layer PLA with 3 perimeters but PETG can easily be used. Used M4 screws with hexagonal head.…
ein weinachtsbaum schmuck mit schloss
Back betweener that can be locked in the rightmost cable hole
This latch can be mounted onto any wooden box with a few 3mm screws. Print on back
lockable 20mm (Festool MFT sized) Bench Dogs made with PLA but reinforced with a 5/16th 2.5" bolt and nut. Alternatively, a 60mm M8 bolt can be used to reinforce. The lockable version is printed in 4 parts to reduce the need for support,…
leaving a sumup model “solo printer” in a semi trustworthy environment. it's not protecting against theft or vandalism, but it keeps it from “moving” to other rooms (and not returning).
Treasure chest with a working lock. The lock is based on a compliant mechanism. The length and width of the inside volume are 170 and 210 mm respectively. Print instructions: Make sure to take precautions to prevent warping of the chest.…
Are you also tired of always begging for a drink lid? Print yours and save the environment! You can use it again and again.. Lockable lid with a heart motif, for a 0.5l cup, suitable for McDonald's and more.. Heart print with 100% infill.…
The box is suitable to have a small stack of business cards at your fingertips and protected wherever you go. Cards with dimensions up to 9,6x5,8 cm fit in the box. Thanks to the sliding mechanism, a card can be quickly removed without…
The locking crate comes in three different sizes: Small (150mm x 135 mm x 70mm) Medium (150 mm x 135 mm x 120mm) Large (150 mm x 135 mm x 170mm) 3mf files have been provided for Bambu Lab printers. The lock is really just a screw, but…
Read more about the process here http://flashgamer.com/arduino/comments/making-a-good-cube Instructions This thing will print nicely on Makerbot's (only I've tested). The cube is really thin, just 1.25 mm but the lid stiffens the…
Inside dimensions: 215 mm x 114 mm x 37 mm Outside dimensions: 221 mm x 120 mm x 40 mm Print settings: up: infill 30% supports: only on the table 0.20 layer down: infill 30% supports: only on the table 0.20 layer lock: infill 90% 0.20…
interlockable storage
Windowframe with panels. For the hinges use a piece of filament.
Lockable bench dog pins designed for ¼" bolts, with a selection of heads for clamping workpieces, templates or jigs to your workbench, MFT or workmate. All of the models are in the correct orientation for printing, and require no…
This Is a recreation of the Imperial Binders (Handcuffs) from the Star Wars franchise. The original Model closes with magnets only, which is gret for some costume fun or to give to kids to play with, however I wanted a version that…
Lockable ammo box for 20 rds. of 6.5x55
A simple, lockable box that prints in one piece. You can scale the box to the limits of your printing area. I would be very happy for any review or observation.
Update: I'm uploading pre-configured backplates and hooks so you can mix, match and print what you need without messing with the model in Fusion :) Pick one plate with the required space between the hooks. The dxx in the plate file name…
DESIGN the chest is completely closed whe you don't have the key. You must twist the key to open the chest. locking mechanizm was inspired by MysticMesh3d's latest design - just to make things clear - I'm not his patreon, I only watched…
Despite the mechanism proposed by Decathlon, I was looking for an idea to create a support to secure the fixation of the 70cm pull-up bar from Decathlon. Decathlon uses a rotation pression system to lock the bar up between walls inside a…
Choose your parts: Central section interlocks with stand legs of monitor and repeats curve of monitor screen. Model is modular and for full set you need: 1 middle shelf 2 middle cabinets (1 mirrored) 2 side cabinets (1 mirrored) 2 side…
Lockable ammo box for 20 rds. of .303 brit
When you print the key you have to glue the sides together.
The tray made by Lerslens is now lockable. I added TPU cutouts to put at the bottom of the tray.
This is a lockable accessory drawer for Rivian vehicles. For it to locking portion to work, you need a PCB, it fits in without the PCB, but it won't lock For printing, I recommend PETG as it withstands the summer heat, PLA does not. The…
Lockable ammo box for 20 rds. of 8x57
FR Support verrouillable pour marqueur acrylique POSCA Support jumelable en longueur ou en dos à dos STL: 1- Corps 2- Glissière verrou 3- Jumeleur 4- Bouchon 8- Support mural vissable ou magnétique Pas de vis pas de colle pour assembler…
This is a cable holder with a filament string hinge. Space for cables 50x22mm, total dimensions 75x30mm Use 3-4 mm diameter wood screws and I recomend drilling a 2mm diameter hole to screw them in easier
I was asked to create a way to repurpose some old 92mm PC case fans as air circulators for a small indoor greenhouse setup. This frame can be mounted on walls, overhead, or on a shelf and locked in place with a print-in-place ball joint.…
Hold a PCB, a model, a small part or anything else up to 45 mm wide right where you need it. Loosen the big collar, tilt and turn the vise to any angle and tighten the collar again to lock the ball. The vise sits off the desk on your…
This 3D printed wall mount is designed to securely hold your Logitech MeetUp remote control in place. It is made of two parts that snap together and is secured with cable ties. Features: Securely holds your Logitech MeetUp remote control…
Lockable hinges for prusa enclosure. Print with paint on supports mainly for hinge part. Do not add supports to the magnet slot!!!! hinge locks used from here: https://www.printables.com/model/36286-lack-locking-hinges-knobs
This model was designed to hold gold dipped roses from I Hate Steven Singer. As my wife pointed out, there is not enough roses to fill my design but there is room for a dozen roses. This box doubles as a gift box for Valentine's Day or…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
