Filament filter cleaner
A small filament filter that can be permanently attached to the spool. One spool one filter.
- Downloads
- 3,278
- Likes
- 326
- Rating
- 4.92
20,119 models
A small filament filter that can be permanently attached to the spool. One spool one filter.
Einhell Akku Wandhalterung
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…
Halter für FritzBox 7590 AX um diese mit 2 Schrauben an der Wand zu befestigen. Den Halter kann man auch so als Tischständer benutzen damit das Gerät eine bessere Belüftung von unten bekommt. Drucken im PrusaSlicer : bei den Haken…
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…
Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…
Ich habe für meinen BOSCH Accu-Staugsauger GAS 18V-1 nach einer Wandhalterung gesucht, aber leider nichts passendes gefunden. Somit mal schnell diese Entwurf gezeichnet. Ich wünsche euch viel Spaß beim Nachdruck und freue mich sehr über…
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
A print-in-place filament filter that hinges open/closed and has a slide locking mechanism. No supports 0.2mm layer height 0.4mm nozzle 15% infill PLA Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.
Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Yet another tool holder for the Original Prusa Enclosure. Already prepared to be extendable with some holes in the bottom to attach clips for example. If you want to mount it on the left side instead, just mirror it in PrusaSlicer. The…
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…
Passt für Stangen mit 12mm
Milchschlauchhalter für die Jura E8 holder for the milk tube of the Jura E8
Meine Settings sind noch nicht perfekt, kann sicher auch mit weniger Zeit- und Filament gemacht werden :)
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
Wandhalterung Remote Fire TV Sprachfernbedienung Pro. Sie unterscheidet sich leider von der Form zur “normalen” Fernbedienung. Wert wurde auf abgerundete Kanten und tief sitzende Schrauben gelegt um ein verkratzen der Fernbedienung zu…
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661
Ich habe hier einen Schleifpapierhalter für meine Baustelle konstruiert. Die obere Klemmplatte besitzt Noppen, welche sich durch das Schleifpapier bohren, welche den halt nochmals verbessern. Die Schrauben habe ich als Rändelschrauben…
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
Der Bürstenhalter ist für eine Bürste, diese wird oft für die Reinigung der Nozzle im 3D Druck verwendet. erstellt in Fusion 360
The sturdy, stylish drip holder for glass carafes (Sodasystream Crystal) and plastic bottles brings order to your kitchen! The design makes it easy to put the glass carafes and lids in the holder. Der robuste stylische Abtropfhalter für…
I needed a proper holder for my pliers and this model came out. It is made for a 15mm french cleat wall. You need 8mm stainless steel round or 8mm wood round. The holes are dimensioned to 8,1mm. Ich brauchte für meine Zangen einen…
Update 19.10.2024: EN Notice: Since I remixed my Front Nozzle holder before the release of Krys own A1 version, it is compatible with Krys ‘A1 mini’ purge catch tray. So please combine my A1 remix with Krys PrusaXlFrontNozzlePurgeA1Mini…
The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…
A tool to help salt the rims of cocktail glasses, this is especially useful for making margaritas. Features a screwtop lid, so salt can be permanently stored without spillage. As with all models designed to be used with food, I recommend…
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…
Ich wollte für meinen Kona Electric einen Einsatz für den oberen Becherhalter. Platz finden sollte der Schlüssel, Einkaufswagenchip, Ladekarte und Kleinkram In dieser Version passen bis zu 8 Standardkarten rein. In der “Blauen Version”…
Für meine LED Streifen habe ich eine Fernbedienung. Damit diese nicht irgendwo herum liegen habe ich mir eine Halterung konstruiert, inkl diversen Befestigungsmöglichkeiten. Die Halterung kann mit den beiden oberen Bohrungen direkt…
Zum sicheren halten von Gläsern, Flaschen, Dosen etc. an Geländern. Für Geländer aus Quadratrohr mit 40x40mm. Mit Bohrungen im Boden, sodass sich kein Wasser, Dreck, Regen etc. sammeln kann. PETG mit 25% Infill sind ganz gut
We have a Juwel 70 aquarium in my kid's room. The original air diffuser, included by the Juwel BioFlow One Filter/Heater combo works fine, the water current in the fish tank was so strong, that the fishes acted irritated. Also, the tuning…
A filter shaping tool made specifically for your xBloom specialty coffee machine reusable dripper. Perfectly shape KWF-155 filters and precisely apply just enough water to make filters hold their new shape. Filters can be formed directly…
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…
9 position manual filter wheel for 1,25" diameter filters. My equipment is very heavy and the hobby of astronomy a little expensive, depending on the level of dedication you want to achieve. Because I like to do things myself, I designed…
Universeller Werkzeughalter für Hazet Lochwand.
This wire holder is designed for a wire with a diameter of 2.5 mm and a base frame with a diameter of 14.5 mm. Printed with 50% infill. You are welcome to change the stp file according to your measurements. Or you write down what…
As promised this is a functioning part that replaced the Zortrax HEPA-Carbon filter. This can be used with the AirManager2 that can be found here:…
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
This is a storage box, to store 50 22LR cartridges. The box is a very simplistic design, but it incorporates a smart layer, that will elevate every alternate row of cartridges such that it becomes easier to pick the cartridges from the…
Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…
- easy print / einfacher Druck / jednoduchý tisk - no supports / keine Stützen / bez podpěr Just stick with double-sided tape / Einfach mit doppelseitigem Klebeband festkleben / stačí přilepit oboustrannou páskou
Yet another tool holder for the Original Prusa Enclosure.
Lotti Karotti von Ravensburger Halterung für die Spielfiguren + Kartenkisten
I have constructed an adjustable graphics card holder. Adjustable graphics card holder for stable support of GPUs in various sizes. Easy to adjust and install, it prevents sagging and ensures a secure fit inside the case.
Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a
DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…
Deutsch: Ich hatte auf Youtube ein Video zu einem ähnlichen Halter gesehen (aus Holz) und wollte das ganze für den 3D Druck designen. Halter funktioniert prima und man sollte die Scheiben direkt auf den Exzenterschleifer (einfach an den…
Halter für eine 5690 pro. Bohren: Lochabstand 22 cm Neu (3.25): Version mit mehr Wandabstand für Glasfaser-Anschluss Mount for a 5690 pro. Drilling: hole spacing 22 cm New (3/25): Version with more wall clearance for fibre optic connection
Pen Holder POLYGON Gyroid + Cubic (2 Diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Version 80 inside diameter (corner to corner): 82mm Version 100 inside…
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
It has been my experience that HEPA/Activated Carbon filters are rather expensive. So, I was delighted to find these P60 filters ( Non-affiliate Amazon US link ) at a resonable cost (~$5 each). I've been using them in my house in the…
With this model, the specific kitchen scale can be neatly stored for example under a cabinet. Attaching can be done with a double-sided tape. Print instructions The provided model is for one side. Mirror the model in slicer for the other…
Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…
After one too many battles with an adjustable wrench on my Tiguan’s oil filter canister, I said, 'Enough is enough!' So, I designed my own 32mm socket to fit a 1/2" drive wrench—because who has time for all that? A few tweaks later, it’s…
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
Ich ärgere mich immer darüber, wenn ich das Flusensieb bei meiner Waschmaschine säubern müsste, keine richtigen Auffangbehälter zur Hand zur haben. Entweder sind sie zu hoch, oder zu klein oder Rund. Oft habe ich dabei eine mittlere…
Gedruckt in ASA (wegen der Temperaturen im Auto) mit Stützen, Schürze und BRIM. passend auf so einen Brodit Halter:…
Flyerhalter für Flyer DIN Lang (105mm x 210mm) Sehr leichter Druck!
Details After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern. Dimensions…
I wanted to recreate the minimalistic design of the egg trays that came with my Bosch refrigerator.The original can hold four eggs, but I also created versions for six and ten eggs. Update: There are now two versions of the design.…
Einfacher Kopfhörehalter für Wand oder Regal. Befestigung mittels 2 Schrauben oder per doppelseitigem Klebeband.
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
I thought I have published it but apparently not - this is simple remix of Juwel Bioflow M filter GItter so that it can be used with skimmer. I have been using it for some time already - just beware that it might require small…
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
Easy to print. This one did fit a KIA SOUL filter. I'm not sure if it was my own design because i couln't find the original drawings and i had the STL for a long time.
I already used 130mm active carbon pads for my soldering fume extractor (iSuck), so this is just another usage for those filters. The model is made that if you print PLA, you can simply remove the filter without the needs to unscrew…
I know “just buy the addon then”, but I like designing in Fusion and am a DIYer so I came up with my own solution for an air extractor / filter box for my Original Prusa Enclosure (OPE). What I already had on hand was a 120mm 12VDC fan…
Prusa Core One Türgriff-Halterung (verstärkte Version mit M3-Verschraubung) Beschreibung: Am ersten Tag der Nutzung meines Prusa Core One ist der Türgriff abgefallen. Die Originalbefestigung war nicht stabil genug. Deshalb habe ich eine…
Neu gezeichnet, da im Netz keine Halterung unter den Namen GSB gepasst hat. Genau Bezeichnung des Akkuschraubers siehe Bild und Zusammenfassung.
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Wandhalter für 2 Messschieber / Wall Support for 2 calliper
This dosing funnel was designed for a Crema 54mm bottomless portafilter and used on a Sage/Breville Barista Pro espresso machine . The part was designed using OnShape and the file is publicly available here:…
Der Würfel ist in 20, 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612
Hair Dryer Wallmount printed in PETG. 75mm Diameter
eine schöne alternative zum ewigen Brille such ja wo liegt sie den zum ja meine Brille ist auf dem Elefanten gedruckt mit 15 % infill und einer 0,4 nozzel ist der Elefant in es knapp über einer stunde beim MK4S gedruckt. Habt spass damit…
Eine Halterung für die OptiGrill Backschale, um diese platzsparend unter Regalböden zu montieren. Schraubenempfehlung: 4,5x35 A holder for the OptiGrill baking tray so that it can be mounted under shelves to save space. Screw…
Einfache Halterung für Cuttermesser und/oder Ersatzklingen. Ich habe mehrere Modelle abgelegt. Man benötigt noch 2 Schrauben der Größe 3,5 mm zur Befestigung. Simple holder for cutter knives and/or spare blades. I have put down several…
Eine kleine aber feine Halterung für Duschköpfe im Badezimmer. Die Halterung kann einfach mittels zwei Schrauben angebracht werden. in english A small but nice holder for shower heads in the bathroom. The bracket can be easily attached…
Auf der Suche nach einem Wattepadhalter mit Zubehör stolperte ich über das Design von Sergej. Ich haber das Model zwar in Fusion selbst neu erstellt, jedoch ist die Idee und das Design von Sergej übernommen. Ich habe eime längere Version…