Search results: lush

Sort order

Counting matching models…

P
Printablesmakermac

Westone IEM Case with Flush lid / Headphone case

UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…

Downloads
1,339
Likes
145
Rating
4.83
P
PrintablesBP3D

Toilet Flush Lever Repair Kit (Straight & Angled) (American Standard) (No Supports)

All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…

Downloads
1,016
Likes
126
Rating
4.73

Flight sim throttle quadrant dual cradle flush mount

Fits two Saitek Logitech throttle quadrants to mount flush wether as side quadrant or overhead. Units securely attached with aligned screw holes. Tight fit- hold both units together when inserting as there is a dimple/recess on the sides…

Downloads
148
Likes
36
Rating
0
P
PrintablesBrooke

Button Eyes for Plushie

My plushie needed some eyes. These eyes are just right! Diameter: 35mm Total Thickness: 5mm You could totally use these as regular buttons too if you want!

Downloads
77
Likes
7
Rating
0
P
PrintablesSlicedbread

Toilet Tank Flush Lever Replacement for American Standard

My toilet lever broke and I didn't want to buy a new one. This model is certainly not overengineered and the tolerances are pretty tight in most places but if you'd rather print one than order one for whatever reason (or just need a…

Downloads
65
Likes
10
Rating
5
P
PrintablesIrgendeintyp

Klaus flush mount distribution box 80x80 (UP-Verteilerkasten) extended cover

An extended cover for Klaus 80x80 flush mount distribution boxes (UP-Verteilerkasten) for when you can't fit all the wiring back inside after making some changes.

Downloads
38
Likes
3
Rating
0
P
Printableskenneyd

7-inch LCD Pi Display-H Flush/ Overhang Mount for Besta Cabinet

I bought a 7-inch “ Display-H ” from aliexpress to use as a display for my home assistant server monitoring dashboard, and then I made this mount to place the display on the inside of the server rack door, attached to the door frame so…

Downloads
17
Likes
4
Rating
0
P
PrintablesNIMIDO

Plush tablet holder Parametrized

I needed a simple way to organize my PLUSH electrolyte and calcium tablets in the kitchen, so I designed this holder. Designed for the Prusa MK3S, printed with a 0.2 mm layer height and 40 mm width. It securely holds containers with a…

Downloads
11
Likes
7
Rating
0

Compass or gauge bezel for flush mount

This bezel allows mounting of a gauge or compass in a larger hole. It is made for flush-mounted gauges or compasses, but it easily adapted for similar uses.

Downloads
7
Likes
1
Rating
0
P
Printablescleberlop

Bambu Lab Purge/Flush/Poop💩 bucket for X1 or X1 Carbon

Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…

Downloads
35,730
Likes
2,727
Rating
4.95
P
PrintablesNivenante

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…

Downloads
7,233
Likes
722
Rating
4.91
P
Printablestchoupshop

Skadis T-Clip System - Low Profile Flush Mount Clips

These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…

Downloads
5,375
Likes
449
Rating
4.97
P
PrintablesMystChic Art

Fnaf Plushies

None of these need supports. The first file is the eyes and body base in case anybody wants to design their own plushies (not for printing). I use acrylic paint and it sticks very well but for better quality I suggest using model paint.…

Downloads
5,310
Likes
342
Rating
5
P
Printablesrace85com

HSW Filament Flush Cut Pliers Holder for Honeycomb Storage Wall

simple insert to fit universal flush cut pliers for filament cutting etc. use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4 perimeters…

Downloads
4,809
Likes
843
Rating
4.87
P
PrintablesJohn Hall

CLICKbase: a no-magnet, latching Gridfinity baseplate - all flush edges, easy expansion, very rigid

CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…

Downloads
4,345
Likes
655
Rating
4.79
P
Printableslouishere_0

CatNap plush

This is model of "CatNap" plush made in Autodesk Fusion 360. The original model used as a reference appeared in Poppy Playtime Chapter 3 as a plush version of a main antagonist of story, this is a plush version of a monster.

Downloads
3,491
Likes
144
Rating
5
P
PrintablesDeclanD_

2020 Extrusion Cable Clips (Flush and Guide)

Simple cable clip design, one clips into the extrusion and extends out, while the other is flush and routes the cables inside the extrusion.

Downloads
2,944
Likes
196
Rating
4.86
P
PrintablesRoland Deschain

Flush V-Slot Rail Covers (Parametric) (Pre-sized for Ender 3 V2)

I needed v-slot rail covers and wanted to be able to customize the lengths so I could work around my other upgrades. My design goals were: Flush top with the v-slot rail (others either extended over the top or were recessed into the rail)…

Downloads
2,193
Likes
281
Rating
4.91
P
PrintablesDavid D

Flush Multiconnect - generic connector for multiboard v2

Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…

Downloads
1,992
Likes
184
Rating
5
P
PrintablesJayden Lowry

Plushtrap

Plushtrap not made by me

Downloads
1,847
Likes
494
Rating
5
P
PrintablesBalu

Multiboard Flush Snap Pusher

Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…

Downloads
1,609
Likes
152
Rating
5
P
Printablesscorf

Parametric Box with flush hinges and magnetic closures

This is a basic hinged box with magnetic closures, fully parameterized in Fusion 360. It is designed with flush hinges for excellent stackability and arrangement. It is intended to use 1.75mm filament as the hinge pin. The hinge pin path…

Downloads
1,588
Likes
171
Rating
4.86
P
PrintablesMAKE IT TV

Bambu Lab Purge/Flush/Poop/Bin/Trash bucket for X1 or X1

you inspired me, I adapted the filament collector according to my needs. It is no longer so deep so you save space behind the printer but higher so that nothing falls over. The logo I have packed extra to glue so you save filament The new…

Downloads
1,206
Likes
68
Rating
4.75
P
PrintablesB00Mguy

Centauri Carbon *Flush* Spool Holder Cap

I saw other cap designs using pascal_lb's as a base, but they all stuck out from the printer, so I remixed my own! This one is flush with the printer and has a little interior handle to twist it on and off.

Downloads
1,192
Likes
182
Rating
5
P
PrintablesYoni

Gridfinity Needle Nose Plier & Flush Cut Holder

I wanted low profile gridfinity storage for my flush cutters and needle nose pliers, so here it is! I modeled this for the needle nose pliers that come with Prusa printers and the flush cuts that come with Creality printers. I left some…

Downloads
1,166
Likes
138
Rating
4.79
P
PrintablesOcelotzlasu

Lift-off hinge (flush)

In my case, the acrylic is flush to the enclosure, so I remixed the hinge to be flush. Also made it mirrored as I needed the hinge on the left side. In case you want it on the right, just mirror it in the slicer The tolerances are quite…

Downloads
1,161
Likes
417
Rating
4.86

Teddy Bear Plush

Shown with and without fuzzy skin applied. Scalable. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
1,131
Likes
121
Rating
5
P
Printablesdreammon li

Bambu X1/P1P/P1S Flush/Poop/Bin/Trash

I designed a detachable waste bin for my P1S. The slope and the waste bin feature a magnetic, detachable design, with a protrusion on the slope for aligning with the screw head under the waste opening. Magnets required for use: 1. Two…

Downloads
1,068
Likes
125
Rating
4.67
P
PrintablesAnna Marchenko

Big crochet needle. Great for plush yarns and alize puffy.

I made this needle really big(10 cm) so it's good for crocheted big toys. I use it a lot to sew parts of plush toys.

Downloads
1,032
Likes
238
Rating
4.91
P
PrintablesBhgp

Steam Deck Carrying Case Insert For EU Plugs Flush (2,5mm)

I have removed the fixed supports and have made the area for the charger approx. 2,5 mm deeper, so it flushes better. Those 4 Slots are for full SD-Cards (microsd + adapter) Sliced in Cura 5.0 Printed with 0,28mm layer height (PLA) with…

Downloads
994
Likes
171
Rating
4.87
P
PrintablesMicha

Bambu AMS flushing volume gauge

The default flushing volumes for AMS filament changes in Bambu Studio are quite big. This guarantees a clean print without colors washing between filament changes but also produces a big amount of waste. In order to avoid having to print…

Downloads
948
Likes
214
Rating
5
P
PrintablesGuyH

Bambu Lab X1CC AMS Colour flush testing - Test process

I think the settings in Bambu Studio are on the very safe side when it comes to how much filament is flushed during a change. I wanted a way to test what would be optimum. I thought about how best to approach this and came up with a plan.…

Downloads
944
Likes
115
Rating
5
P
PrintablesMateusz Tokarz

Ultimate Countersunk Washer Collection | M3-M10 | Perfect Flush Fit

Tired of ugly screw heads ruining the sleek look of your 3D printed parts or woodworking projects? Welcome to the Ultimate Countersunk Washer Collection . This comprehensive hardware set is engineered with precision to perfectly hide…

Downloads
940
Likes
479
Rating
5
P
Printablesoclastax

Flush cutter handle remix (creality style)

This is a remix of some flush cutter handles i found on thingiverse (those: https://www.thingiverse.com/thing:4802229 ), i modified the base of the grip to make it a bit shorter. They are made for the flush cutters that you get with most…

Downloads
906
Likes
135
Rating
4.86
P
PrintablesFtanakasp

Flush cutter cap

Flush cutter cap

Downloads
900
Likes
109
Rating
4.64
P
PrintablesFangoh

Gridfinity Flush Cutter Holder

If you print this for another tool, post a make sharing what brand / type of tool it fit (or didn’t).

Downloads
898
Likes
115
Rating
5
P
Printablesgartnix

Bambu Lab X1C / P1P Flushing Volume Calibration

In order to properly calibrate the purging/flushing volumes, I took the original file, set the color change point to be at the bottom of the tower, and followed the instructions in the original thingiverse description to get the color…

Downloads
877
Likes
242
Rating
5
P
PrintablesIguanahotsauce

HSW Flush cutters holders - Correct Pin Orientation

This is a remix of the HSW Flush cutters holders with the pin orientation flipped. The original model had the tapered end of the pin as the end that wasn't attaching to the honeycomb storage wall making it really difficult to insert. This…

Downloads
857
Likes
109
Rating
5
P
PrintablesRapalax

HSW Flush cutters holders

Small tool holders for small pliers or flush cutters. Single and Tripple sized.

Downloads
840
Likes
137
Rating
4.89
P
Printablespwolfamv

Lian Li A3 SFX Power Supply Flush Mount

The Lian Li A3 is a great case but the power supply mounting options aren't always ideal. To get the most use out of the available space, I wanted to come up with a better solution. A user on Reddit was using a similar solution so I…

Downloads
824
Likes
43
Rating
5
P
PrintablesETBell

3/4" ID PVC Pipe Clip Flush Mount

Clip for 3/4" Schedule 40 PVC Pipe. Designed this to use for mounting Christmas lights onto a PVC pipe, and then snapping the PVC pipe into the clip. I saw someone charging $3.50 for a similar model, so I made my own and thought I would…

Downloads
759
Likes
93
Rating
5
P
Printablesoclastax

flush cutter handle replacement

Im not sure if this counts for the contest as it is a remix but i still think its worth sending in for the contest those handles are made for the flush cutters that you get with most creality printers and most printers in general im…

Downloads
747
Likes
168
Rating
4.82
P
Printablespetrbakos

Geberit dual flush button

Finally visible is bottom area of the print - type of bottom fill pattern make different looks. I recommend to use textured print sheet. As visible is mostly bottom side, no need to push printer to high resolution. 2023 11 01: New version…

Downloads
739
Likes
69
Rating
5
P
PrintablesSteveJohnsen

Radius Gauge Remix - Tighter Fit, 0.02 - 0.04mm Accuracy, Flush Fit for ~16mm x 3.5mm Caliper Blades

DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…

Downloads
728
Likes
127
Rating
5
P
PrintablesGcodeGearHead

ORCA - Flush / Purge Volume Test for MMU's

Flush / Purge Volume Calculator ########################################## # Intro ########################################## This is a calibration test setup in Orca slicer to help calibrate your flush / purge volumes and get you closer…

Downloads
715
Likes
80
Rating
5
P
PrintablesPekapeque

Flush Cutters Grip Covers

Covers for the arms of your flush cutters in case the original ones started to fall apart.

Downloads
694
Likes
293
Rating
4.77
P
PrintablesBecca

Gridfinity 2x Flush cutters holder

Inspired by this scissors holder https://www.printables.com/model/462648-gridfinity-5x1-scissors-holder by @Rask_803771, a 1x4 gridfinity holder for 2x flush cutters. I created a similar, but slightly larger version of this model for wire…

Downloads
687
Likes
78
Rating
4.75
P
Printablescospacegirl

Plush Animal Eyes

This is a basic stuffed animal eye, with backing. with basic print settings both parts fasten together nicely, but you may want to enlarge the eye piece by 1-3% for a tighter fit. This file should be resizable to your liking, by modifying…

Downloads
666
Likes
134
Rating
5
P
PrintablesMottN

Ski Drill Jig Templates (Version 2 - Flush Text)

These are templates for my ski drill jig (found here ). If you have a printer that can work with bambustudio or orca slicer and want to use a my print profile with settings and pre-colored text (There should be profiles for 9.0, 9.2, and…

Downloads
657
Likes
50
Rating
5
P

Snapmaker U1 Tool Tray - New! Design with Extra Storage, Easier Access, Flush

This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…

Downloads
653
Likes
69
Rating
5
P
Printablescyberbobcity

Bottom Flush Mount French Cleat Lock

This is my 2nd French cleat lock design to help keep your tool holders in place on your wall when you remove your tool. It requires that your tool holder sits flush with the bottom of your cleat. It's perfect for smaller or lighter tool…

Downloads
649
Likes
137
Rating
5
P
Printablesjdtzn

Desert Blush (Tenor Saxophone Mouthpiece)

This is the Desert Blush tenor saxophone mouthpiece. Tip opening is drawn at 0.105" (2.67mm.) Play Tests To see previous play tests, see this playlist. Baffle Shape To view the baffle shape, view the second .stl file (named “__half”). It…

Downloads
633
Likes
43
Rating
5
P
PrintablesMaverick Ng

Bambu Lab Tall Purge/Flush/Poop bucket for X1 Carbon

Print instructions: 1. 0.2mm layer height 2. Fill 15% 3. Filament: ABS or PETG I printed 3 walls which are solid. You can also choose to print 2 walls, but if you add any amount of infill, the item will also be solid. Bucket thickness is…

Downloads
593
Likes
31
Rating
5
P
Printablesmegafrost

Adapter for Geberit Sigma Flush Plate on UP100 Cistern

Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…

Downloads
587
Likes
17
Rating
0
P
PrintablesDane Earnheart

Creality K2 CFS Flush Calibration

Ensure that Prime tower is disabled and flush volume is set to 0 and infill direction is set to 0 As this is a work in progress please comment with any issues found

Downloads
561
Likes
80
Rating
5

Work Holding with Flushing Manifolds | Electrical Discharge Machining | Gridfinity

Purpose This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place. Side Flushing…

Downloads
547
Likes
40
Rating
0
P
PrintablesLyric

Underware Flush Connector

Underware Flush Connector An Underware connector that sits channels flush against the board. Also 26% less material and 20% faster to print. This model also features an inner hole that improves internal thread strength. A version without…

Downloads
544
Likes
93
Rating
5
P
PrintablesTheo Gottwald

Bambu Lab X1 Next Gen. Purge / Flush / Poop Bin

This is the enlarged version of my other Poop-Bin: https://www.printables.com/model/285625-bambu-lab-x1-larger-poop-bin in practical Use, it showed up that a larger Size is useful, and this time we go to the maximum size we can print .…

Downloads
539
Likes
29
Rating
0
P
PrintablesGeorgK

DT 4 and 6 pin connector flush mount

The flush mount design ensures that the deutsch connector sits level with the mounting surface, providing a neat and low-profile installation. Connector Housing : Base : A flat square base (approximately 50 mm x 50 mm) with mounting holes…

Downloads
537
Likes
34
Rating
5

BMW E30 - adapter to flush mount the radio

A modification to the heater control panel for the BMW E30 to have the radio flush with the control panel. This adapter sets the radio ~7mm back into the dashboard. To be able to use this adapter piece, you will need to modify your heater…

Downloads
511
Likes
34
Rating
0
P
Printablesgoldiesvinyl

Flush Scrub Daddy Holder

sits flush on the counter and drains into sink

Downloads
504
Likes
58
Rating
4.86
P
Printablesknoopx

Roca Toilet Flush Button

This is a replacement for a broken one. Slightly different but does the job. Has built-in supports.

Downloads
487
Likes
37
Rating
5
P
Printablessdbarker

Ubiquiti Unifi G4 Doorbell Pro Siding Flush Mount

Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…

Downloads
472
Likes
34
Rating
3
P
PrintablesNico Smit

AR-15 5RD Mag (flush with Receiver)

The feed-lips are a bit thin, this is so that cartridge is seated high in the magazine for reliable feeding, thus smaller layer heights are advisable. (I'd advise you to add to the thickness in this area until it does not fit in you…

Downloads
471
Likes
52
Rating
5
P
Printablesmikeeel

3D Printer Flush Cutters grip / handle / Snips Wire Stripper Creality Ender 3 5 CR-10 CR-10S

mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!

Downloads
459
Likes
51
Rating
5
P
Printablesrebeltaz

Toilet Flush Handle Repair parts

-=[ UPDATE 08-26-19 ]=- After about a month of use, the first version snapped it's little head off. I have redesigned this so that it utilizes a much larger hexagon guide pin. This time the hex is a part of the rod and goes into the…

Downloads
450
Likes
37
Rating
4.67
P
PrintablesLucevelyn

Mushroom Shelf With Flushback

Remix of a mushroom shelf with a mount placement, this one has a flush back for use with command strips

Downloads
446
Likes
142
Rating
5
P
PrintablesLyza

Lush - Rush that uses Diana Mags!

This is the Rush. Except, i made it utilize Diana magazines. It'll fit Nightingale mags too, but that depends on how well you made the cutout for the hole to catch. Here's additional stuff i'm linking off Chance's remix of his Rush,…

Downloads
445
Likes
154
Rating
5
P
Printableskwfredeen

Pegboard Flush Cutter Holder

Holds CHP flush cutters on a standard 1 inch pegboard. Printing Instructions Print in downloaded orientation. Supports are required for the pegboard posts.

Downloads
426
Likes
62
Rating
5
P
PrintablesAsdfg

Flush fitting Z axis cover for Bambu Lab X1 / X1 Carbon

Unlike previous covers, these ones are designed to be low profile and sit flush on the bearings, printed with TPU and 0,2mm nozzle. This is not recommended by Bambu Lab so big boy pants on and create a new filament profile, the profile in…

Downloads
408
Likes
80
Rating
5
P
PrintablesLukas Melvin

Ninja Slushi Replacement Drip Tray

Edit- i added a few different options after some requests- -the original drip tray replacement with inner tray. (wont fit stock inner tray) -larger Drip tray that will hold the stock OEM inner tray tight instead of loose like stock one…

Downloads
400
Likes
33
Rating
0
P
Printables3DPS

Anderson plug flush mount

A simple flush mount box for an Anderson plug. I print using PC carbon fiber to withstand the heat in the back of the 4WD.

Downloads
379
Likes
30
Rating
0

Flush Drawer Pull

Drawer Pull designed to install into 2.5" hole into 3/4" plywood. Route the back side of the drawer front down the thickness of the rear handle pull part so that it will be flush with the surface and install onto the drawer without…

Downloads
374
Likes
71
Rating
3.5
P
PrintablesEMT EOD Martin

Toilet Flush Replacement

This is a handle and lift arm replacement that I designed and has been working for me. I don't know enough about plumbing to say what systems it will work with. All of these are friction fit. I printed this out of carbon fiber nylon. No…

Downloads
369
Likes
28
Rating
5
P
Printableslromandine

Bambu Lab Purge/Flush/Poop bucket for X1 or X1 Carbon (Smaller Version)

Remix of Cleberlop's poop bucket where I made the left side not stick out so the printer and bucket can sit flush against something on the left.

Downloads
364
Likes
15
Rating
5
P
Printableszzzy

Toilet Flush Handle System with Angled Lever

Repair a broken Kohler toilet flush handle system like this https://a.co/d/6Nci2Hg by 3d printing the handle, axle, and angled lever. Must reuse the original through flange. If no longer usable, you can 3d print the square sleeve from…

Downloads
357
Likes
23
Rating
5
P
PrintablesInterlinkKnight

3D Printer Flush Scraper (no scratching)

I hate using normal scrapers because they scratch the 3D printer bed, and plastic scrapers are not strong enough, so I made this scraper so the tip of the blade never touches the bed, but it gets very close to be effective removing the…

Downloads
357
Likes
41
Rating
5
P
Printablesxanes

Springtrap Plushie

He is precious, but little dumb

Downloads
356
Likes
28
Rating
0
P
PrintablesModery

Flush Cutter Cap for Ender

A small remix that allows to use this cap with the flush cutter from the Ender 3 Max Neo (and potentially also other Ender/Creality provided flush cutters). Slightly longer than the original, and the bottom has been widened a bit.

Downloads
339
Likes
27
Rating
5
P
PrintablesTom Cichowicz

Pastamatic Filament Winder - Flush Pins

Modified Pins - Long & Short with a cap to be glued as a permanent install. Pin can be cut off (for replacement) Used - Gorilla Glue - (clear)

Downloads
331
Likes
57
Rating
0
P
PrintablesJosé Pedro

Plush Donald Duck

Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…

Downloads
328
Likes
32
Rating
5
P
Printablesbober

v1 plush

Плюшевый v1 из ULTRAKILL

Downloads
322
Likes
21
Rating
0
P
PrintablesUKPenguin

Centauri Carbon Flush Riser

I was inspired by the slotted riser from Ccraft3d - https://www.printables.com/model/1292227-v2-new-elegoo-centauri-carbon-sliding-riser-with-p but I really wanted the flush fitting aesthetics of thaessler's -…

Downloads
319
Likes
51
Rating
5
P
PrintablesDaniel S

Knipex flush cutters cover 78 61 125

Cover to hold the pliers closed for storage. -Print in TPU standing on the opening. Category: Hand Tools

Downloads
316
Likes
59
Rating
5
P
PrintablesPeter Sassaman

CHP-170 Flush Cutter Gridfinity

Holder for CHP-170 to go in Gridfinity sorting system. Credit to Zach Freedman for the Gridfinity System:

Downloads
312
Likes
41
Rating
4.33

Chicken Plush

Almost no supports required, and EZ removal. Cutest chicken on the whole site. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
311
Likes
33
Rating
0
P
PrintablesRadTechDad

AMS Disconnect Tool - Flush Letters

This is the same tool, but with the letters flush with the rest of the tool.

Downloads
311
Likes
24
Rating
5
P
PrintablesFinisz

Toilet flush button

My toilet flush button got broken and i couldn't find any replacment in stores in my area so i decided to try my best and made one in fusion360. This is my first ever project in 3d so i think it could be something to improve but hey! it…

Downloads
308
Likes
20
Rating
0
P
Printablesnettraxx

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1, X1C and P1P

Dies ist ein Remix von Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1, X1C and P1P in der Slim Version. Ich hatte erhebliche Probleme die 3 kleinen Magnete zu befestigen, so das ich das Model auf Flachmagnete um modelliert habe. 20mm…

Downloads
308
Likes
13
Rating
0
P
Printablesschuetzi99

Flush-mounted box lid / Unterputzdosendeckel

This is a lid for flush-mounted electric boxes. Can be customized for other diameters with OpenSCAD. Maybe, in some cases a brim is necessary for the bracket.

Downloads
306
Likes
57
Rating
5
P
PrintablesBasementLAB

Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa

Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…

Downloads
303
Likes
98
Rating
0
P
PrintablesKarel_G

Geberit toilet flush clip

For gluing the clip i recommend UHU "Allplast" or “Hart Kunststoff”.

Downloads
297
Likes
25
Rating
5
P
PrintablesHugo

Vesa flush wall mount plate 100x100mm

Simple remix of the original Vesa flat mount but with a 100x100 spacing Print instructions Print flat on whichever side, recommend at least 3 perimeters.

Downloads
294
Likes
26
Rating
5
P
Printablesmatroskin

catnap plush articulated 2.0 UPDATE

Made in 3D Builder Articulated Catnap figure from Poppy Playtime Chapter 3-4 2.0 update log 20.03.2026 The joints in the legs and arms have been enlarged for better durability (Joints from dummy 13)

Downloads
293
Likes
17
Rating
0
P
PrintablesLoosiu

Friatec wall toiletflush buttons V2

Model reveres designed from damaged buttons. Original springs are reused. Design made for Friatec part no: 33 10 01 Print instructions: adjust wall line count to chive strong upper brim 3 up to 5 , bottom thickens - min 4 layer for good…

Downloads
288
Likes
10
Rating
5
P
Printablesrhinodavid

Knipex Flush Cutters 78 61 125 Gridfinity Case

Created with the Fusion Gridfinity Generator .

Downloads
286
Likes
37
Rating
4
P
PrintablesSkeleton Dan

Kurama (Plush) from Naruto

Source: https://www.models-resource.com/pc_computer/narutotoborutoshinobistriker/model/46683/

Downloads
283
Likes
36
Rating
0

Toilet Flush Lever

Filament: PETG Layer 0.2 Position tank threaded collar around flush handle in slicer as needed. Check threaded collar clearance in layer view Print horizontal, support required. Print nut separately. Try existing nut first should work.…

Downloads
282
Likes
20
Rating
0