Search results: mcu

Sort order

399 models

P
Printablesbenjiao

NodeMCU v3 ESP3266 Case with Sensor Slot

A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…

Downloads
90
Likes
6
Rating
5
P
Printables_KaszpiR_

Multisensor ESP32-WROOM-32 NodeMCU with Camera hole and extended builtin antenna

About: Remix of Multisensor ESP32-WROOM-32 NodeMCU ESPresense by teaser : Added camera hole (10mm hole) Expanded area for extended builtin wifi antenna on modern nodemcu boards that protrudes outside of the dev board Wider hole to connect…

Downloads
54
Likes
1
Rating
0
P
PrintablesClamikra

Halter für Emcur Nasendusche (Stand for nose rinsing device)

Wir haben ein offensichtlich altes Modell der Emcur Nasendusche (für Emser Nasenspülungssalz). Die mitgelieferte selbstklebende Halterung war bei uns nicht anzubringen. Also bestand Bedarf, einen Ständer zum Befüllen und Trocknen zu…

Downloads
44
Likes
3
Rating
5
P
PrintablesMakers Mashup

NodeMCU ESP8266 Case Rev1

A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…

Downloads
1,469
Likes
66
Rating
4.5
P
Printablesstew675

Qidi Plus 4 Hex Mainboard Cover for 80mm fan with focused ducting for steppers, CPU, MCU

Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…

Downloads
1,353
Likes
160
Rating
5
P
Printablessirprintalot

ESP32 NodeMCU Dev Kit C Case

Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…

Downloads
1,218
Likes
120
Rating
5
P
PrintablesF14V

ESP8266 nodeMCU V2 Case

Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…

Downloads
1,208
Likes
94
Rating
4.92
P
PrintablesChas1397

ESP8266 NodeMCUv2 Tall Case

This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.

Downloads
1,067
Likes
80
Rating
4.82
P
Printablesplasmata

NodeMCU V3 Case

Needed a case and didn't find one I liked so I designed my own. I wanted something very minimal with thinner walls to reduce print time and material used. There is a port on the bottom of the case for wires to feed through as well as a…

Downloads
1,023
Likes
58
Rating
5
P
Printables80sNerdBomb

MCU Thor's Hammer Mjolnir

3 part model of Mjolnir as depicted in the MCU Thor/Avengers films

Downloads
951
Likes
156
Rating
4.67
P
PrintablesThomas

ESP8266 NodeMCU v3 Din Mount

just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0

Downloads
779
Likes
71
Rating
0
P
Printablesdon frechdachs

NodeMCU (ESP 8266) Case

Hello friends this is a simple case the Node MCU (ESP 8266). Route the cables through the case bottom before you solder them to the Node MCU. Support is needed for the Case Bottom. Print Settings Printer Brand: Creality Printer: Ender 3…

Downloads
754
Likes
77
Rating
4.88
P
PrintablesRemy

NodeMCU v3 Case

I liked the case plasmata designed, but needed more space beneath for easier pin access. This version provides more space and an unnecessary vent on the lid. ***UPDATE: Added a base version with two holes for wire access.

Downloads
711
Likes
42
Rating
5
P
Printablesteaser

Multisensor ESP32-WROOM-32 NodeMCU ESPresense

My first take on building my own sensor for presence detection in our rooms. All cases I tried either didn't fit the board or weren't able to house the sensors. So I designed one myself. It fits the AZDelivery ESP32 NodeMCU…

Downloads
706
Likes
65
Rating
4.33
P
Printablesthrutheframe

Bambu Lab X1 MCU heatsink fan bracket

UPDATE 02 April 2023 I have added the STEP and f3d files of those who want to edit the design. This is the fan bracket that is slotted over the heatsink of the X1. I designed this as those I saw were restrictive ducts that create back…

Downloads
698
Likes
166
Rating
5
P
PrintablesBigBauceMan

Waveshare RP2040 MCU Board with 1.28inch Round LCD Watch Case

Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…

Downloads
694
Likes
30
Rating
5
P
Printablesabasson

NodeMCU ESP32 S2 with DHT11 Sensor Case

This is my rendition of a case with lid for the ESP32 S2 NodeMCU board to house the DHT11 temperature and humidity sensor. This model also have the Home Assistant logo embedded on the side. This simple design ensures a tight fit for the…

Downloads
644
Likes
36
Rating
0
P
PrintablesConfusedChicken

NodeMCU V3 (ESP8266) Case

There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…

Downloads
616
Likes
39
Rating
5
P
PrintablesCodable

ESP32 NodeMCU case

A remix scaled up a bit to fit an ESP32 nodemcu Category: Electronics

Downloads
516
Likes
51
Rating
4.83
P
PrintablesMecky1963

Board for development with Arduino Uno, RPi4B, ESP8266 Nodemcu, Wemos D1 Mini

I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…

Downloads
514
Likes
96
Rating
5
P
PrintablesF5PGT

ESP8266 node MCU V3 Case

ESP8266 node MCU V3 Case from AZ-Delivery

Downloads
506
Likes
31
Rating
4.67
P

Terminal for SSD1106 1.3'' OLED and NodeMCU v3 ESP8266, without soldering

This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…

Downloads
483
Likes
47
Rating
0
P
Printablesthrutheframe

Voron V0.2 Lower Rear Panel with 8010 MCU fan

The existing 30mm fan for cooling the Raspberry Pi, BTT pico board and stepper drivers may not be sufficient if users want to fully enclose the V0.2 for ABS, ASA or Nylon with a hot chamber. I design a back panel to install a silent…

Downloads
462
Likes
114
Rating
5
P
PrintablesFranz

NodeMCU V3 Case

I wasn't entirely happy with other models, so I created my own. minimal size to protect all header pins cutouts for USB port, the 2 buttons and Dupont connectors You just need 2x countersunk M3 screws or friction fit the top (for this you…

Downloads
456
Likes
38
Rating
5
P
Printables6d6178

Skadis NodeMCU ESP-32S Case

This is a case for the NodeMCU ESP-32S development board by Ai-Thinker that can be mounted on an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Note: This was made for the Micro USB version of the board and…

Downloads
444
Likes
64
Rating
5
P
PrintablesRananna

Esphome nodemcu esp32 media player

The purpose of this project is to create an inexpensive audio player for home assistant that can be plugged into an existing stereo speaker system. With this system, you can also build a simple mono amplified speaker that can be used as a…

Downloads
418
Likes
17
Rating
0
P
Printablesgrk

Fan mount MCU Bambu Lab P1P

Changes made: - removal of redundant paths, - repairing the model -removal of a wall, improving cable routing

Downloads
418
Likes
66
Rating
5
P
PrintablesMorten R

NodeMCU ESP8266 Enclosure

Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…

Downloads
416
Likes
109
Rating
0
P
Printablesabasson

NodeMCU ESP32 Devkit V1 with DHT11 Sensor Case

This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…

Downloads
396
Likes
23
Rating
0
P
PrintablesBartBE

Housing for Nocemcu and HC-SR04 ultrasonic distance sensor

This is a housing for a NoceMCU v3 and an HC-SR04 ultrasonic distance sensor. The lid will stay on when held upside down, but it's easy to remove. I designed this together with my son as an introduction to 3D modeling. Print Settings…

Downloads
390
Likes
25
Rating
0
P
PrintablesHalit

NodeMcu_V3 ESP8266 Double Relay Case2

Rafts: No Supports: Yes Infill: 20%

Downloads
366
Likes
31
Rating
5
P
Printablesknoopx

NodeMCU v3 + MAX7219 Case

This is a case for holding a NodeMCU v3 and 4x 7-segment MAX7219 8x8 led matrix. NOTE : The holes for the NodeMCU board are not properly aligned. The board fits but screws are a little angled. Will fix soon. Category: Electronics

Downloads
345
Likes
37
Rating
0
P
PrintablesMaggus

Case for OpenDTU/AhoyDTU (for 38 pin ESP32 NodeMCU)

Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…

Downloads
327
Likes
18
Rating
5
P
PrintablesBlayzeing

CJMCU-64 8x8 RGB NeoPixel Matrix Reference Model

I'm making a project that uses these 8x8 RGB LED matricies and I needed a reference model. I couldn't find one so I knocked this one up in OpenScad. Seeing as I couldn't find one here, I figured I'd upload it so anyone can use it as a…

Downloads
326
Likes
13
Rating
0
P
Printablesdon frechdachs

Wemos D1 Mini Case (NodeMCU)

Hi guys, this is a simple case for the Wemos D1 Mini (NodeMCU ESP8266) . Route the cables through the case bottom before you solder them to the Wemos D1 Mini. Easily resized and customized in Fusion360 with the provided .f3d file.…

Downloads
322
Likes
20
Rating
5

NodeMCU v3 Case for WLED

a simple ESP8266 case Designed for use with WLED firmware Assembly instruction Print the case Solder power and data pin to the NodeMCU pull the cable through the hole in the back put the MCU board into the bottom part of the case put the…

Downloads
309
Likes
22
Rating
5
P
PrintablesCarsam

Enclosure / Case for ESP8266 / NodeMCU / ESP12-F

Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.

Downloads
301
Likes
29
Rating
0
P
PrintablesDolmaster

LCD Display. Case MAX7219 + NodeMCU Lua Lolin V3

Display box for 4xMAX7219 (Multi filamente + Single filament version) You can use PLA, PETG or others but of a light color (recommended white) , since the screen has 0.8mm of plastic in front that is used as a diffuser. MMU version…

Downloads
296
Likes
38
Rating
5
P
Printablese_namics

ESP8266 - NodeMCU V3 - Case

This is a case for the NodeMCU V3 - ESP8266 (e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3 ) esp8266_case_box v5 : added two holes to mount box with screws on a plate (e.g. with 2xM2). I hope you like the model! → Makes and Comments are…

Downloads
296
Likes
17
Rating
5
P
PrintablesGoddchen

NodeMCU Case

A case for housing a NodeMCU (ESP8266) board with enough room for cable management. I added holes on both sides to get your sensor cables out of the case, if needed. The case is also high enough to house all of your cable mess. Walls are…

Downloads
269
Likes
18
Rating
5
P
PrintablesPresswerk65

Case for NodeMCU ESP8266 V3 + RS232 to TTL Breakout Board

The lid snaps in, just screws for mounting the electronics required

Downloads
255
Likes
20
Rating
0
P
PrintablesLorenz H

Case for ESP8266 NodeMCU and BMP180/BMP280

This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…

Downloads
240
Likes
29
Rating
4.5
P
Printablesbb_prints

NodeMCU Enclosure

Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…

Downloads
239
Likes
21
Rating
4
P
Printablesabasson

ESP32S NodeMCU Case - v1

This is my rendition of a case with lid for the ESP32S NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32S board, and also a squeezed fit for the DHT11 sensor. Also,…

Downloads
238
Likes
15
Rating
0
P
PrintablesRemy

Enclosure for ESP8266 Development Board NodeMCU V3

This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it

Downloads
236
Likes
19
Rating
5
P
PrintablesTirthak

NodeMCU ESP32 3D Model

same as the title lol.

Downloads
232
Likes
3
Rating
4
P
PrintablesPlatypus1987

ESP8266 NodeMCU Case

Case for an ESP8266 NodeMCU with micro-usb connector. Press-fits together. If it is too lose, apply a drop of glue.

Downloads
232
Likes
20
Rating
5
P
PrintablesOtann

Voron V0.2 Rear Panel with 8010 MCU fan

Just wanted a quieter printer, when it is idle. The Pi gets hot on it's own and needs some cooling, so I designed this back for a larger fan. You can connect it directly in place of the old one. BOM: The fan is 8010, mounted with 4…

Downloads
228
Likes
46
Rating
5
P
Printablesneotil

ESP32 NodeMCU Enclosure/Case for WLED

Warning: You won't be able to access the Micro USB port with this enclosure! I modified this housing to be quite a bit slimmer, but it still has enough space for a level shifter and a 24V to 5V step down module. That's why the opening for…

Downloads
224
Likes
88
Rating
0
P
PrintablesFeroc

Case for NodeMCU V3.2 Arduino ESP8266

I've designed this case for the NodeMCU V3.2 Arduino ESP8266 (Lolin/Wemos), with a bit of space for a sensor. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics

Downloads
224
Likes
13
Rating
0
P
Printablesaarrodri

Bambu Lab X1 NOCTUA motherboard/MCU Fan holder for 4410

My motherboard fan sounded like a motocross bike so time to replace. This holder hangs on to the poop chute with double sided tape. No need to remove heatsink, or even remove the old fan if you don't want to. Use the connectors that come…

Downloads
217
Likes
50
Rating
5
P
PrintablesRafał

SOVOL SV08 toolhead fan holder + mcu fan

This is the remix of atomic fan holder from Filip Luchianenco. I reduced weight and added possibility to attach toolhead mcu 3010 fan. Additionally, I created from scratch mcu fan cover. Printed with ABS, 0.2 layer height. BOM: YOUNUON…

Downloads
214
Likes
65
Rating
5
P
PrintablesP3c1

Rat Rig V-Minion - alternate MCU + PI Case

This box is made for the BTT sk2 and the PI 3 A proposed by Rat Rig in the full kit. You can reuse the 4010 fan and the Cable passthrough part. to assemble you need brass inserts for 3mm screws. Also to have a more compact machine I use…

Downloads
209
Likes
40
Rating
5
P
PrintablesSoftware2

Small project box for LOL1n - ESP8266 (NodeMCU Lolin V3)

This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…

Downloads
207
Likes
7
Rating
0
P
Printablessungo

Corne MCU Cover with Reset Hole

A simple model to cover the controller on a Corne keyboard. I use the Corne HiPro Case by mburrows for my Corne keyboards. I don’t have an OLED though so I’ve been using the MCU cover from the Corne Choc Low Profile Case . Problem is that…

Downloads
200
Likes
14
Rating
5
P
PrintablesNightHawk

ESP8266 Node Mcu Print in Place Case

I was fiddling around with fully printable hinges and created this design for a project. There is a small gap of 0.2mm between the top and bottom parts. After printing you may need to carefully crack possible connections between both…

Downloads
194
Likes
28
Rating
5
P
PrintablesDrTob

Wemos D1 Mini Case (NodeMCU) with USB

Remix of the Case from don frechdachs for Wemos D1 Mini (NodeMCU ESP8266) . I've added a cutout for the USB port. Compatible with the Wemos D1 Mini as seen here:…

Downloads
190
Likes
15
Rating
5
P
PrintablesAgar

NodeMCU 1.0 ESP-12E/-12F case (ESP8266, Wemos D1)

Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…

Downloads
188
Likes
7
Rating
0
P
PrintablesInventor

[UPDATE] Bambu Lab P1P MCU heatsink fan bracket

Halterung für den Lüfter auf dem Kühlkörper vom P1P. Lüfter kann über den Gcode angesteuert werden, mehr dazu im BambuLab Forum , ich bin das Problem umgangen, indem ich die Kabel abgeklemmt habe, die für die Steuerung zuständig sind.…

Downloads
187
Likes
28
Rating
5
P
Printablesmaddingamer

Case for NodeMCU (Lua Amica) with 2-relay module

Remixed techniczny's case to fit with my specific nodemcu and relay module nodemcu used: AZDelivery NodeMCU Lua Amica Modul V2 ESP8266 ESP-12F relay used: AZDelivery 2-relay module 5V with optocoupler low-level-trigger 3 versions uploaded…

Downloads
185
Likes
17
Rating
2
P
Printablesnicklmade

NodeMCU PIR Sensor case

Case for a PIR sensor large enough to contain a nodemcu

Downloads
184
Likes
17
Rating
0
P
Printables민규 김

NodeMCU Case

Modified for esp8266(with no letters) NodeMCU PCB size is about 58mm X 31.1mm It fits quite tight. A bit hard to remove from the case.

Downloads
184
Likes
10
Rating
5
P
Printablesdemek

NodeMCU ESP8266 V3 DIN Enclosure

Simple, well fitted enclosure for NodeMCU. Designed to fit Voron DIN rail clip. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl To assembly you need 4xm3x16mm screws, 4xm3 nuts, 2xm2x10mm self…

Downloads
178
Likes
24
Rating
5
P
PrintablesBeau Slim

Sovol SV06/Plus Fan Mod with MOSFET Lid for MCU Enclosure

MAKE YOUR SV06 QUIETER: This modification allows for fan control of both the MCU Fan and Hotend Heatsink Fan on the Sovol SV06. I have not yet tested it on the SV06 Plus, but it should work the same. KLIPPER IS REQUIRED. It may be…

Downloads
174
Likes
79
Rating
5
P
PrintablesGregor

ESP-32 Dev Kit C NodeMCU - Cover for WiFi Repeater .

ESP-32 Dev Kit C NodeMCU - Cover for WiFi Repeater . Filament eSun PLA+ Black

Downloads
170
Likes
10
Rating
0
P
PrintablesKarl

ESP8266 NodeMcu V3 box/case

This is my attempt at creating an enclosed box for the ESP Development Board 8266 for my LED projects. I wanted to house the board its self along with wago connectors that I have all in one place looking neat and tidy. Wagos are great,…

Downloads
169
Likes
16
Rating
5
P
Printablessungo

Lily58 MCU Cover

I couldn't find a 3d printable cover for the lily58's MCU. Which is … weird. But here's one now. IMPORTANT: The cover is not symmetrical. The hole placement on the board itself is strange and a symmetrical plate interferes with the…

Downloads
168
Likes
13
Rating
5
P
Printablesno one

ESP-32 NodeMCU Developmentboard (AZ-Delivery)

Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.

Downloads
168
Likes
6
Rating
0
P
PrintablesWHerzog

NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case

This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display. The backplate is supplied in three differnt versions: With hole for a DHT22 Temperature/Humidity Sensor With mounting points for Adafruit Breakout…

Downloads
166
Likes
21
Rating
4
P
Printablesrevoxsvko

NodeMCU + DHT11 + 128x32 OLED case

Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…

Downloads
165
Likes
18
Rating
0
P
Printablessteve5092

NodeMcu Amica V2 case

A case design for NodeMcu V2, Amica This Design is base on the design from Crashoverride, published Jan 30, 2016 https://www.thingiverse.com/thing:1305796 Category: DIY

Downloads
165
Likes
8
Rating
5
P
Printableshoeni

Snap together ferraris sensor (Amica NodeMCU ESP8266, TCRT5000)

These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…

Downloads
162
Likes
8
Rating
5
P
Printablesspamwax

nice!nano mcu

mcu board used mainly in building custom keyboards. USB port and pin locations are accurate, the resistor, chip and diodes are for cosmetic purposes only.

Downloads
160
Likes
7
Rating
0
P
PrintablesGiulian

NodeMCU V3 Case (screwless)

imported from thingiverse. remix: https://www.thingiverse.com/thing:4515152 Enclosure for a NodeMCU v3 board with space for a connector to a strip of addressable LEDs. Powered via an external 5V USB power supply. Suitable for powering LED…

Downloads
159
Likes
21
Rating
5
P
PrintablesArtxime

VORON 0.2 Lower Rear Panel with MCU fan on right side

Remix of the lower rear panel with 80mm fan mount, but mounted on the opposite side from the filament spool. You can mount either 8010 or 8015 fans since it won't get in the way of the spool. For my build I used a 8015 Delta electronics…

Downloads
158
Likes
27
Rating
5
P
PrintablesDermund

Ratrig V-Minion MCU case for BTT Octopus

First off all you need a angled USB-C cable for the pi. (see picture) and 3mm heatset inserts, all parts are put together with Screws

Downloads
155
Likes
20
Rating
0
P
Printablesntsanov

nodemcu case

I made this case to house nodemcu with esp3d installed for my delta. There are two variants - w_2020_mount is intended to be mounted on 2020 profile. Screws needed are M2x6 Category: 3D Printer Accessories

Downloads
154
Likes
10
Rating
0
P
Printablesdomgregori

Lolin NodeMCU V3 Enclosure

Created an enclosure for the slightly larger NodeMCU, specifically this one: https://www.aliexpress.com/item/5PCS-V3-CH340-Wireless-module-NodeMcu-Lua-WIFI-Internet-of-Things-development-board-based-ESP8266-esp/32794607540.html My NodeMCU…

Downloads
153
Likes
6
Rating
0
P
Printableslolfonfire

ESP8266 node MCU V3 - Large Case

ESP8266 node MCU V3 Case

Downloads
152
Likes
10
Rating
5
P
PrintablesgoTVm

Case for ESP8266 Nodemcu 12-E with ILI9341 2.8" Screen

V2 - 04/11/21 I haven't printed this new version yet. Updates are: Added slit in the screw poles in the main body to add a nut, so it keeps the lid and body together much tighter without straining the plastic too much. Made walls slightly…

Downloads
150
Likes
10
Rating
5
P
PrintablesJustHannah

Quiet MCU shield for Sovol SV06 (Plus) ACE

This is a replacement shield for the MCU box of the Sovol SV06 ACE and SV06 Plus ACE printers. (This model is essentially a companion build to the PSU shield .) While the MCU box is not the worst offender in terms of acoustics (that honor…

Downloads
143
Likes
28
Rating
5
P
PrintablesPvL__N

NodeMCU(ESP8266) DHT22

Simple and small NodeMCU(ESP8266) and DHT22 case. 4x bolt m3x12mm The DHT22 is very close to the ESP. Create a code to put the ESP in “Sleep”. Then it will work fine!

Downloads
143
Likes
19
Rating
0
P
PrintablesFyat

Sovol sv06/PLUS MCU + Raspberry Pi 3B/4B case + 80*10 Fan

Case designed to fit both the MCU and a Raspberry Pi, along with a 80mm Fan. The front part has the holes for the 4* M5x12 fan screws and on the sides 4* M3x6 . As for the Back part, pick it accordingly to your Raspberry Pi version, and…

Downloads
140
Likes
19
Rating
5
P
Printableswedgeworks

Project Box for ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI, Relay Module and JST Connector

There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…

Downloads
138
Likes
25
Rating
0
P
Printablesscross01

Slim NodeMcu V3 Case

A slim case for the ESP8266 NodeMcu V3 CH340 micro-USB micro controller boards I picked up on AliExpress NodeMcu-CH340-V3 . The style of this case is inspired by the Raspberry Pi Pico snap-together case by @glabifrons Designed for 0.2mm…

Downloads
137
Likes
8
Rating
5
P
PrintablesAltar

Node MCU ESP8266 box

Jednoduchá krabička pro Node MCU ESP8266 s otvorem pro napájecí kabel a otvorem pro kabel od čidla

Downloads
135
Likes
18
Rating
5
P
PrintablesChado

Lolin CH340 Chip NodeMCU Enclosure

Made this enclosure for quick prototyping for CH340 Chip NodeMCUs. It has kinda snap to fit function but do not rely on that :) Hope it does help. Also attached step file so feel free to modify. Material eSun PLA+ Black Hotend Temp 215…

Downloads
128
Likes
14
Rating
5
P
PrintablesBuksen

NodeMCU MAX3232 Case

Can be printed without supports.

Downloads
127
Likes
9
Rating
0
P
PrintablesPhantom16361

BTT TMC5160T Pro AWD + MCU Board mounting bracket for Octopus and Manta M8P

This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…

Downloads
127
Likes
32
Rating
0
P
PrintablesJack@KunWork

Relocating the AP (Host MCU) Board to the Back of the Qidi Q2

Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…

Downloads
125
Likes
50
Rating
5
P
PrintablesXylen.C4

NodeMCU ESP8266 Deauther OLED Touch Sensor

This is a case for an ESP8266 NodeMCU v3 from LoLin. This Case uses no screws. Everything fints in because of friction fit. It is made for Spacehuhn's espdeauther. All credits belongs to Spacehuhn!…

Downloads
121
Likes
10
Rating
0
P
PrintablesBalesz

NodeMCU Lolin V3 housing

I've recently upgraded to an SKR Mini E3 V3 board and had an ESP8266 lying aound, so I decided to set up ESP3D and put it in a box attached to the middle extrusion. Features: Dupont connectors are accessible, but not exposed. The top is…

Downloads
121
Likes
4
Rating
5
P
PrintablesFxWoody

Qidi Plus 4 MCU cover 120mm fan

Simple 120mm fan cover grill with snap-in removable Venturi. More Venturi design to come :)

Downloads
119
Likes
36
Rating
5
P
PrintablesKai

Gridfinity D1 Mini V3 NodeMCU Holder Stackable

This is a bin für D1 Mini NodeMCU V3 which fits into the gridfinity system and is also stackable with other bins.

Downloads
113
Likes
14
Rating
5
P
Printablesohuf

Node MCU and PIR Box

This is a remix of Finch's "parametic rounded sliding top box v1.1" from Thingiverse It fits a NodeMCU and a PIR looking "frontwards". Inside there are stands for the NodeMCU. The PIR is a close fit: you have to unmount the "lens" part…

Downloads
112
Likes
12
Rating
0
P
PrintablesLiron

NodeMCU Cover

A case/cover/shell for NodeMCU (ESP-12E) For V2 CP2102

Downloads
111
Likes
5
Rating
0
P
PrintablesSeanChangX

ESP8266 NodeMCU Lua Case

GrabCAD(Get The STP File): https://grabcad.com/library/esp8266-nodemcu-lua-case-1 Print Settings Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Category: Gadgets

Downloads
110
Likes
11
Rating
0
P
PrintablesAndrea Persola

BMCU supporto A1mini

Piccolo supporto compatto e stabile per BMCU370 LITE (ams lite clone), messo al posto del porta bobina. Ho sfruttano le viti originali per fissare il piccolo aggancio sull'asse z mentre per fissare il pezzo grande all'BMCU ho usato 3…

Downloads
109
Likes
13
Rating
5
P
PrintablesJefficus

Parametric Breakout Board Sockets (ESP8266 NodeMCU, Arduino Nano, etc)

Every time I build a little electronics project, I hate how the components usually just rattle around in the case. So I designed this customizeable solution in OpenSCAD that lets me configure the number of pins, the sizing and spacing,…

Downloads
105
Likes
17
Rating
5