Search results: mors

Sort order

264 models

P
PrintablesAdam Kimmerly

Morse Code Paddle / CW Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, I have been disappointed with the performance, cost, and size of cheap morse code paddles. So, I designed my own. For portable ops, or to…

Downloads
4,618
Likes
505
Rating
4.98
P
PrintablesAdam Kimmerly

Single Lever Morse Code Paddle / CW Cootie Key

BACKGROUND: After designing a super simple iambic paddle for portable ops , I had multiple requests for a single lever version. So, here it is. I added a small snap-on cover to the design, but it's not entirely necessary. The hole in the…

Downloads
553
Likes
73
Rating
5
P
PrintablesAdam Kimmerly

Ultra-Portable CW Morse Code / Telegraph Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… For portable ops, or to mount it…

Downloads
382
Likes
64
Rating
5
P
PrintablesChris Stevens

Morse Monkey Case

This is a case for the Morse Monkey which is available as a kit at https://grapevineamateurradio.com/products/morse-monkey-cw-training-kit?variant=42239757779123 I used PETG and only the switch requires supports. Enjoy!

Downloads
31
Likes
7
Rating
0
P
Printablesrj_ruin

American Morse Equipment keyer base and leg strap attach plate

I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…

Downloads
29
Likes
1
Rating
0
P
PrintablesKynes_Peace

Tremorscale - Articulated (Elder Scrolls Online)

This is an articulated model I sculpted of the creature from The Elder Scrolls Online, Tremorscale. A duneripper boss from one of the dungeons in the game (Volenfell). Support me on Ko-Fi! https://ko-fi.com/zunasw Printed on an Ender 3…

Downloads
2,484
Likes
423
Rating
4.75
P
Printables3Dinfinity

Morse Code Template - Letters

Template for morse code letters

Downloads
1,607
Likes
855
Rating
4.88
P
PrintablesJonathan Kayne

Iambic CW Morse Code Paddle by KM4CFT

This is my take on an Iambic Paddle for CW (Morse Code) Operation. It takes inspiration from the CWMorse Pocket Paddles but is smaller and can be made at home! I Recommend printing this in PETG for durability, but you can print this in…

Downloads
1,035
Likes
142
Rating
5
P
PrintablesBasementLAB

Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial

Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial For fast installation of RNC, flexible & rigid conduit Easy to print, optimized filament usage Sizes available: Metric Ø 7mm Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 8/20mm…

Downloads
832
Likes
274
Rating
5
P
Printablestomas

Morse code template

Template for typing Morse code. Resolution: 0.16 mm Infill: any 29. 05. 2024 Added new stl model: Morse code template with slashes behind each sing Added a slash to separate individual letters of the morse code

Downloads
754
Likes
222
Rating
5
P
PrintablesAdam Kimmerly

Leg Strap Base Plate for K6ARK CW Key / Morse Code Paddle

Love your K6ARK morse code paddle, but want more mounting options? Look no further. Simply print one of these three 3d printed plates to suit your needs; the angled ones for a right or left leg strap, or the straight one for a desk mount…

Downloads
683
Likes
94
Rating
5
P
PrintablesRob W1RCP

Iambic CW Morse Code Paddles with Bearings and Magnetic Return

The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…

Downloads
575
Likes
49
Rating
4.8
P
PrintablesThe Fat Cat

Morse Code Lookup Table Card (Compact & Weather Proof)

I did not found a good morse code lookup table to be printed, so I made my own as a multi color print. Morse code is a method used in telecommunication to encode text characters as standardized sequences of two different signal durations,…

Downloads
548
Likes
154
Rating
4
P
PrintablesParagon

Protein Skimmer Reef Aquarium - Odpieniacz białek akwarium morskie

Witam, do pobrania mojego pomysłu i projektu odpieniacz białek do akwarium morskiego, odpieniacz przeznaczony do pracy z pompą Jebao DC 3000 lub 4000, mogą pasować inne pompy trzeba sprawdzić. Film z Budowy: Odpieniacz na rurze plexi…

Downloads
534
Likes
101
Rating
5
P
Printablesbigrip

graboid from tremors

This is el blanco from the movie tremors 3. simply clue the tentacles in his mouth if you want. Print Settings Printer: CTC prusa i3 Rafts: No Supports: Yes Resolution: 0.1 ,0.2 ,0.3 Infill: 5 % Category: Sculptures

Downloads
489
Likes
69
Rating
5
P
PrintablesPlankto

Morse Code Key

Morse Code Key created in OpenSCAD using magnets instead of the spring for the return. BOM: M3x5mm Screw M3x8mm Screw M3x10mm Screw M3x25mm Screw M3 Locknut 2xM3 Nut 3x M3 Washer 2x 623 Bearings 2x 8mmx2.75mm Magnet 3.5mm Panel Mount Jack…

Downloads
423
Likes
64
Rating
5
P
PrintablesTheChurch

Morse Party Animals

Here's Morse from Party Animals. My second ever sculpture/model. Might not be 100% accurate but I did my best! You have one furry model and one smooth. You can check on my profile if you want other animals (coming) from the game. Enjoy!…

Downloads
387
Likes
49
Rating
0
P
Printables3Dinfinity

Morse Code Template - Numbers

Template for morse code numbers

Downloads
309
Likes
140
Rating
5
P
Printablessabbo

morsa da banco - bench vise

è suggerito l'utilizzo di feltrini adesivi per non graffiare il banco da lavoro o la scrivania. al primo assemblaggio forzare leggermente le viti nei fori e avvitare/svitare più volte per rendere lo strumento più scorrevole; fare lo…

Downloads
297
Likes
21
Rating
0
P
PrintablesHdm

Morse code keychain

For nozzle 0.4 resize to 175 percent minimal. Cut the file into half in Z. After print glue it. UPDATE: Corrected Q in receive side, thx to Adre_. Print instructions Category: 3D Printing Summary For nozzle 0.4 resize to 175 percent…

Downloads
279
Likes
46
Rating
4.5
P
PrintablesHari Hurtig

Morse Code Key

See original for build instructions

Downloads
272
Likes
28
Rating
0
P
PrintablesAdam Kimmerly

Big Knob Portable CW Morse Code / Telegraph Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… then I modified it for better…

Downloads
271
Likes
32
Rating
5
P
Printablesbigrip

graboid from tremors full body

graboid from tremors full body . Print Settings Printer: i3 clone Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 % Category: Sculptures

Downloads
260
Likes
30
Rating
5
P
PrintablesMAiello

Morse Code Mini Cootie Key (Sideswiper)

This is my take on a compact Morse Code sideswiper key, (also called cootie keys.) Unlike the traditional telegraph key which uses an up-and-down motion, the sideswiper makes contact on either side of a flexible arm, making for much less…

Downloads
227
Likes
37
Rating
4.67

Morse Taper 3 Tool Holder for Grizzly Metal Lathe Backsplash

I printed this in PETG-CF, for strength and a nice texture. See the photos for recommended supports. It's printed angled to maintain strength and to keep a consistent surface finish. I can provide customized versions of this model for…

Downloads
226
Likes
33
Rating
5
P
PrintablesBHE_Crafts

Morse Taper 2 Tool Holder (Lathe/Mill/Drill Press)

Small tool holder that's great for holding tools for a benchtop lathe, mill, or drill press. 6 holes sized for MT2, one of the most common taper sizes. Also has smaller holes between the MT2 holes for smaller tools (chuck key, tightening…

Downloads
225
Likes
29
Rating
5
P
PrintablesModel Magic

Tremors - 1990 - Val & Earl

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
208
Likes
36
Rating
0

Clamp - Morsetto a C

ENG Easy printable clamp! If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Morsetto a C Se vi piace e volete supportare il mio lavoro, vi prego di donare qui:…

Downloads
204
Likes
15
Rating
0
P
PrintablesS_lemmer

Morsetaper 2 cleaner

Hi made tis model of at MT2 cleaner for lathe spinels etc. printed super flawless standing on the flat end.

Downloads
196
Likes
23
Rating
5
P
PrintablesMartin Brown

Metal lathe / mill Morse taper 3 toolholder

Printed in petg at 0.2 mm layer height, two parts are held together using m4*16 bolts and M4 nuts, the base is attached to the wall board using suitable M3 screws. Nuts are inserted in the wall bracket at 8.8mm using a filament colour…

Downloads
196
Likes
28
Rating
0
P
PrintablesModel Magic

Tremors - The Graboid - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
195
Likes
35
Rating
0
P
PrintablesBasementLAB

Speedometer cable clamp for Honda Transalp - Africa Twin / Morsetto Cavo contachilometri Applies to/Adatto per Honda Transalp XL600V and XL650V - Africa Twin 650 - 750

Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…

Downloads
195
Likes
18
Rating
0
P
PrintablesBasementLAB

Vee block with clamp, clamping Knob M8 Threaded Stud - Prisma Officina con Morsetto e Manopola di serraggio M8

Vee block with clamp, clamping Knob M8 Threaded Stud - Prisma Officina con Morsetto e Manopola di serraggio M8 This Precision V-Block Clamp Set is designed for checking precision machine parts, general workshop use, and holding stock when…

Downloads
194
Likes
46
Rating
0

morse taper 1 x MT2 tool holder

Morse Taper 2 (MK2/MT2) x 1 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang…

Downloads
193
Likes
7
Rating
0
P
Printablesdgardner

Amateur Radio Morse Code Paddle / CW Key

Great design for a 3D paddle with just a few modifications including: Added side walls to the base to prevent accidental keying Rounded the base bottom for a better feel Added screw holes to bottom to facilitate additional stuff Created a…

Downloads
185
Likes
45
Rating
5
P
PrintablesBarrtyG

Arduino UNO case - ARMORS series

The first model in the "modular Arduino portable workstation" series, abbreviated as ARMORS. The distinctive features of the series are: modularity, easy assembly without the use of screws and glue, minimum tools, only a hammer,…

Downloads
185
Likes
37
Rating
0
P
PrintablesMAiello

Morse Code Sideswiper (Cootie) Key

Mar 7 2018: Added an STL file to print two small wrenches to assist adjustment of the contacts. See photos. This is my take on a Morse Code sideswiper key, (also called cootie keys.) Unlike the traditional telegraph key which uses an…

Downloads
181
Likes
22
Rating
0

morse taper 2 x MT3 drill bit holder

Morse Taper 3 (MK3/MT3) x 2 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from build plate only. The tool holder module couples with…

Downloads
176
Likes
8
Rating
0
P
PrintablesModel Magic

Tremors - Val & Earl - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
173
Likes
32
Rating
0

morse taper 1 x MT3 tool holder

Morse Taper 3 (MK3/MT3) x 1 drill bit/tool holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from base plate only. The tool holder module couples…

Downloads
170
Likes
1
Rating
0

morse taper 1 x MT4 tool holder

Morse Taper 4 (MK4/MT4) x 1 drill bit/tool holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from base plate only. The tool holder module couples…

Downloads
165
Likes
3
Rating
0
P
PrintablesLinusius13

Morse Key

Beschreibung und Bauinformationen folgen in Kürze.

Downloads
164
Likes
28
Rating
0
P
PrintablesAdivor

NEW Single Lever Paddle Morse CW print in place

My original post https://makerworld.com/en/models/579172#profileId-500029 First Single Lever CW Paddle Prin in place. Ultra portable, lightweight 12/14grams, and efficient design for QRP and portable CW operating! You just need 3 screws…

Downloads
151
Likes
19
Rating
4
P
PrintablesModel Magic

Tremors - Burt Gummer - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
146
Likes
26
Rating
0
P
Printablesmcdanlj

Morserino M32 Pocket Case for production components

Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later. Use the STEP files if you wish to change the models in some other CAD. Use the STEP or STL files to print as-is. The STEP files may need to be…

Downloads
136
Likes
16
Rating
5
P
Printablesbigrip

Assblaster from Tremors

assblaster from the tremors movie Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 25% Filament: everyone PLA silver Category: Creatures

Downloads
126
Likes
22
Rating
0
P
Printableskaje

MT (Morse Taper) Gauges

I picked up a piece of equipment which I suspected had an internal Morse Taper of MT1 (or maybe MT0), but I didn't have any corresponding tooling in my shop to verify the size. So I made these gauges to verify the size before I spend…

Downloads
121
Likes
9
Rating
5
P
PrintablesEduard Bosshard

Adam's Morse Code Paddle with Dove Tail and Cable

I played around with Adam's original files and ended up with a solution with magnets and an ordinary hinge instead of the integrated hinge and a dove tail that allows for attaching the paddle to the housing of the (tr)uSDX. The…

Downloads
118
Likes
21
Rating
5
P
PrintablesValerio

Morsa Longer Nano Pro

Oggi giocavo con il mio Longer Nano Pro, e ho avuto la necessità di bloccare un pezzo che non si reggeva da solo, ho pensato a una piccola morsa da fissare al piatto. Una bella piccola morsa esisteva già quindi l'ho modificata per…

Downloads
115
Likes
9
Rating
0

Morse Key Straight Vertical

This is a rework from: https://www.thingiverse.com/thing:6569884 Changed: Spring → magnets Hidden cables for aesthetic purposes Modified the inside base to facilitate weight loading to the base Added 3.5mm jack Added a magnet cover for…

Downloads
114
Likes
15
Rating
0

Morse Code Card

This model is a handy little tool that is perfect for your Altoids Tin, your wallet, or just your pocket. At just 1 mm this model is roughly the size of a credit card. I used a color swap for layer four so that the letters stand out on…

Downloads
114
Likes
44
Rating
5
P
PrintablesDKPrinter

American Morse Ultra Porta Paddle Morse Code Paddle Handholding Shroud

The AME morse code paddles are meant to be mounted to a base using the three screws supplied with the unit. However, the unit is small enough that it is perfect for field use in ham radio SOTA (Summits on the Air) and POTA (Parks on the…

Downloads
112
Likes
12
Rating
0
P
PrintablesJN4JXL

Morse Code Paddle by JN4JXL

Parts Bearing: MR117ZZ x 4 Magnet: 5x1mm Neodymium magnet x 6 Screw: M3x10mm x 20 Flat head tapping: 3x8mm x 4 Wire: 0.2mm Mag Print finger_piece x 2 spacer x 2 selece side_hole_frame or back_hole_frame x1 other x 1

Downloads
108
Likes
21
Rating
4
P
Printableselumspe

Morserino case with 18650 battery holder

This is a remix of the M32 case, paddle clip, and 18650 cell holder. Credit to W7OSU club members: Luke Lodwig, KJ7FQB, and Jason Wang, N0BOY Modification Extended the case to enclose the battery holder Added wiring slots on the bottom of…

Downloads
106
Likes
24
Rating
5
P
PrintablesFabietto3D

Morsetto a vite

Morsetto a vite con varie misure

Downloads
106
Likes
2
Rating
0
P
PrintablesKisssys

Morse 2 tool holder

Wall MT2 holder Note: This was save in the inch format by mistake so scale it to mm. I can't find the drawing file I did. Cheers Kisssys Category: Machine Tools

Downloads
104
Likes
11
Rating
0
P
PrintablesZakoplex

VE7ZAX Magnetic Return CW Paddle Morse Code Key mod of K6ARK CW Paddle

I love the original Morse Code Paddle / CW Key that K6ARK made. I was trying to get the contact distances closer but had trouble with the pressure from my plastic springs not being enough. With magnetic returns I was able to get the…

Downloads
99
Likes
14
Rating
5
P
Printablesfissi0n - K1TDG

Morserino Case

This is a case for the Morserino. I have included a support wedge to prevent the paddles from moving.

Downloads
88
Likes
8
Rating
4
P
PrintablesProjunk

Parametric Morse Taper Adapter Sleeve

Parametric Morse Taper Adapter Sleeve MT3 to MT2: MTA_AdapterSleeve_3_2.stl MT4 to MT2: MTA_AdapterSleeve_4_2.stl MT4 to MT3: MTA_AdapterSleeve_4_3.stl MT5 to MT2: MTA_AdapterSleeve_5_2.stl MT5 to MT3: MTA_AdapterSleeve_5_3.stl MT5 to…

Downloads
83
Likes
4
Rating
0
P
PrintablesKB9RLW

Side Swiper (cootie) Morse key. Minimal hardware req.

This is a simple, minimal hardware, side swiper Morse code key. Otherwise known as a "cootie" key. NOTE: You will want to print the arm on a raft to prevent the leaf spring parts from warping off the bed. This design only needs five…

Downloads
80
Likes
7
Rating
0
P
PrintablesJonathan Kayne

KX2 Mountable Morse Code Paddle/CW Key

This is a remix of the Iambic Paddle designed by Adam Kimmerly (K6ARK). I really liked his design an thought it would pair well with the ultra portable Elecraft KX2 HF Transceiver. I also wanted to help put out a design that lowers the…

Downloads
80
Likes
22
Rating
0
P
Printableswavebird049

iPhone 17 model from rumors

Let's see if this model is correct or not! 3d print it to have a (not working) model of the next iPhone before anyone else does! Follow me and use my other models, more coming soon! I will upload more dummy models of phones soon, so stay…

Downloads
79
Likes
1
Rating
0
P
PrintablesDigirig

Virtual Pivot Point Straight Morse Key

A VPP straight Morse key - the knob follows the native trajectory of the wrist. Concept Demo: Build video: https://youtu.be/miGSeoow_kU Printed parts STLs are in print orientation, except the tower: the STL stands on its tongues, the 3mf…

Downloads
78
Likes
35
Rating
0
P
Printables3dw1n

Modular Morse Taper drill rack mt1-mt4

As we could not find a morse taper holder suitable for our needs we designed these interlocking drill racks : Morse taper 1 - 22 positions Morse taper 2 - 16 positions Morse taper 3 - 6 positions Morse taper 4 - 4 positions We printed…

Downloads
73
Likes
5
Rating
0
P
PrintablesAdam Kimmerly

Modern Morse Paddle Finger Pads

One of the finest portable CW paddles you can buy is from Modern Morse . Aaron has made a truly fantastic morse code tool, handmade and designed in the US. Get one, you won't regret it. Then, consider swapping out the finger pieces with…

Downloads
70
Likes
15
Rating
5
P
PrintablesKB9RLW

Version 2.1 of my pico paddles for morse code, includes wrist/leg strap mount.

This is version 2.1 of my wrist mounted paddles. Embedded magnets allow for flexible mounting options. It's a minimal hardware design, requiring just a few screws, a stereo jack, and magnets. All parts are listed with links in the…

Downloads
69
Likes
12
Rating
5
P
PrintablesHari Hurtig

"Pocket" (smaller) variant of the Morserino32 CW trainer

The Morserino32 is an amazing project and the device has plenty of features. But it's too large to fit in my pocket. Hence I've created a new and smaller PCB for the new heltec v3 lora module (Morserino32 uses the v2 one which is end of…

Downloads
69
Likes
8
Rating
5
P
PrintablesGetLitCNC

MT4 Morse Taper Holder

This is a holder designed for Morse Taper 4 tooling. I use this to store tooling on my lathe's back splash shelf. It is secured using recessed 10-24 cap screws. You will need a 1-½" hole saw for the pilot hole. I print these with ABS,…

Downloads
67
Likes
10
Rating
0
P

SteadyArc Putting Aid for Golfers with Hand Tremors

SteadyArc is a 3D-printable putting aid designed to help golfers dealing with Essential Tremor, Parkinson's disease, or other hand tremors maintain a steadier putting stroke during recreational play. For many golfers with tremors, the…

Downloads
67
Likes
7
Rating
0
P
PrintablesburningBeard

EBB36 Mount for XOL with Sherpa Mini, M12, and Morsun buck converter

EBB36 Mount for XOL with Sherpa Mini, M12, and Morsun buck converter

Downloads
67
Likes
12
Rating
0
P
PrintablesIvan Serroels

Vertical morse taper holder

With this model you will be able to store up to 9 number 4 Morse tapers. These can be tailstocks and chucks for the lathe. Support material: Yes Draft: No Material: PLA Quallity: 0.2mm

Downloads
66
Likes
7
Rating
0

EJ.0001 - Morse Key

Simple morse key with inside a simple circuit based on NE555 oscillator that pop out the sound. 📖 You can find all the instructions and explenation about how it works here:…

Downloads
65
Likes
12
Rating
0
P
PrintablesChris Stevens

Morse Monkey 0.91

Adjust layers for contrast on the front panel lettering. Kit is available from https://grapevineamateurradio.com/products/morse-monkey-cw-training-kit

Downloads
63
Likes
7
Rating
0
P
PrintablesZortness

Modern Morse Nameless CW Key Case

Small protective case for your Modern Morse Nameless CW Key. Throw it in your pack without worrying about scratching the key, or anything else. Inspired by similar cases I saw for the BaMaKey TP-III. FreeCAD file is included if you want…

Downloads
62
Likes
7
Rating
0
P
PrintablesGX1400

Morserino bracket for Pelican M40 Micro case

Source Fusion 360 files included so you can remix or modify. Right side stores accessories and is elevated so lid captures items. Should be enough room to hold a pair of headphones on top of the morserino. For the morserino captures, I…

Downloads
62
Likes
12
Rating
0
P
PrintablesChristian Kuhtz

Magnetic cradle for N0SA SP4 morse key

More details can be found at https://holdmybeer.io/2023/07/02/magnetic-cradle-for-n0sa-sp4-morse-key/

Downloads
61
Likes
7
Rating
0
P
PrintablesKB9RLW

Wrist or leg mounted Morse code paddles. V1

Note: I've left this model online in case anyone needs spare parts. I have redesigned these. Version 2 can be found here: https://www.printables.com/model/1525157-version-2-of-my-pico-paddles-for-morse-code-includ Micro paddles for SOTA,…

Downloads
60
Likes
6
Rating
0
P
Printableskubatyszko

Morserino 32 capacitive paddle wedge

Capacitive paddles shipped with Morserino 32 are very delicate and like to fall out. This tiny tool slides neatly between the acrylic case and the paddles, keeping them in place. Print in any filament you want, any layer height you want,…

Downloads
60
Likes
3
Rating
5
P
PrintablesBummer Bummer

MT2 / MK2 / Morse taper 2 / Chuck Key Tool Holder for lathe WM210

Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Подходит для Токарного станка WM210, закручивается винтом для…

Downloads
57
Likes
7
Rating
0
P
PrintablesSmokintbird

Display Stand for Morse Taper #3 MT3 Collet Set

This stand holds and displays my new set of cheap Collets for Morse Taper Number 3. This collet set arrived in oily bags packed in cardboard boxes so this was my solution. I will likely print the plain version also just to store other MT3…

Downloads
57
Likes
4
Rating
0
P
PrintablesSpace_Gal

Terrific Big Morse Code Tablet

A haptic model to teach Morse Code in the classroom on a large tablet. Can be tied to a display or smaller related items can be linked to this tablet.

Downloads
57
Likes
22
Rating
5
P
PrintablesBasementLAB

Soft Jaws for Vice - Jaws Protector - Vice snap on cover - Guancetta per morsa 145mm

Soft Jaws for Vice - Jaws Protector - Vice snap on cover - Guancetta per morsa 145mm Use mirror Tool for the Left - Funzione specchio per il sinistro Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx

Downloads
56
Likes
9
Rating
0
P
PrintablesNathan

Hyundai Kona N Front Logo Morse Code

This is a badge to replace the H logo with the Morse Code logo on a Hyundai Kona N. Print Settings Printer Brand: Flsun Printer: Flsun V400 Rafts: No Supports: No Filament: Inland PETG Notes: Print the logo front side down for a smooth…

Downloads
55
Likes
5
Rating
0
P
PrintablesHari Hurtig

Morserino M32 Pocket Case (official)

EDIT Jan 2025: This is obsolete, the most current version can be found here: Production version (QRP Labs) case for the Morserino M32 Pocket. The official Morserino M32 Pocket can be bought at the QRP Labs shop.…

Downloads
54
Likes
3
Rating
0
P
Printablesuppitydowney

Morse Mania app Arduino pro micro keyboard morse code key adapter.

This project utilizes an Arduino Pro Mini to create a custom Morse code keyboard interface. The system uses a single button to generate keyboard inputs for dots ( [ ) and dashes ( ] ), allowing for Morse code input via straight key or…

Downloads
53
Likes
5
Rating
0
P
PrintablesBill Porter

Micro Clipboard -Morse Key Holder

This is a micro-clipboard sized to a field notes book with a K6ARK paddle mount integrated on the underside. It is designed to allow you to have a firm surface to hold the field notes book while logging as well an easy method to “hold”…

Downloads
52
Likes
14
Rating
5
P
PrintablesJay3D Designs

Tremors Cinema Film Room Sign Box

Tremors Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.: 17.5cm x…

Downloads
51
Likes
21
Rating
0
P
PrintablesVince 589

Mors de protection pour étaux 100mm

Mors de protection pour étaux 100mm Avec emplacement pour deux aimants de carré 5mm. Fichier 3D pour modification Category: Hand Tools

Downloads
51
Likes
2
Rating
0
P
PrintablesRob W1RCP

mini-SK: A tiny Morse Straight Key with ZZ bearings and MAGNET return (no springs!)

I have uploaded a PDF with step by step instructions. I will create an assembly video in the future and upload it to my YouTube Channel. http://youtube.com/@w1rcp # Per Assy Short Description 2 Magnets 6mm x 2mm 4 M3x8 screw 2 M3x12 screw…

Downloads
51
Likes
5
Rating
0
P
PrintablesVojtas

Krabička Morse YACK

webové stránky: https://www.elektrotabor.cz Tiskové parametry: materiál PLA nebo PET-G vrstva 0.2 - 0.3 tryska 0.4 (větší tryska by možná taky byla použitelná, ale nemám otestováno) doporučuji stromové podpory Další komponenty: Bateriový…

Downloads
46
Likes
1
Rating
0
P
PrintablesBacon Fat Labs

Leg Strap Base Plate with hex key storage for K6ARK CW Key / Morse Code Paddle

If the K6ARK paddle had enough real estate to add a hex key, it would totally be there. Oh, trust me, I tried. This remix adds a storage location in the strap base print for the 1.5mm hex key used for adjustment on the grub screws for…

Downloads
45
Likes
5
Rating
0
P
PrintablesBubutech

Morse 2 Holder

infil 20% perimeter 3

Downloads
45
Likes
5
Rating
0
P
PrintablesWilts01

Base for Kent Double Morse Paddle

My Kent Double Paddle had a habit of sliding around the desk on the existing rubber feet. Also I didn't like the give in the rubber feet. So I designed this plate so that there is a flat surface on the bottom of the key. It attaches with…

Downloads
44
Likes
6
Rating
0
P
PrintablesTibuck

V3 morse taper#2 8tpi with half inch #13 threaded rod

2 arbor with 8tpi with inserted 1/2 inch #13 threaded rod for extra strength. PRINT AT 100% infill I am in no way responsible for your safety, uses with your own judgment. Print threads down insert the threaded rod from bottom up on the…

Downloads
41
Likes
3
Rating
0
P
PrintablesBill Porter

N6ARA Morse Paddle (Plug Model) Case

This is a case that houses the N6ARA Morse Code Paddle (The plug model) and the adjuster that comes with it. The clearances are so that both the key and the adjuster should hold in place with friction. You will most like need to do a…

Downloads
40
Likes
4
Rating
0
P
PrintablesN4KPT

Modern Morse Nameless key case

I purchased a Modern Morse Nameless key from @aaronmakeskeys on Instagram and it's a spectacular key. It came with a foam-lined metal tin case for it, but it was rather large. I like to operate CW portably, so size and weight are factors,…

Downloads
38
Likes
6
Rating
0
P
PrintablesN4KPT

Case for Putikeeg "Classic" Morse Code Key (MCT04)

I was interested in a straight key for portable ham radio operations with a magnetic return feature. The Putikeeg MCT04 fit the bill in terms of size, quality, price, and features. This key more commonly goes by the name, “Classical Morse…

Downloads
38
Likes
1
Rating
5
P
PrintablesMuad´Dib

3D Morseova abeceda (3D Morse's alphabet )

Destička pro zápis morseovy abecedy. Board for writing Morse alphabet.

Downloads
38
Likes
10
Rating
0
P
PrintablesJonathan Kayne

Velcro Strap Mount for CWMorse Pocket Paddle

This is a leg strap mount for the CWMorse Pocket Paddle: https://cwmorse.us/products/blue-yellow-pocket-double-paddle-morse-code-key CWMorse sells a leg strap mount for their Pocket Paddles, but I wanted one that would work with the…

Downloads
36
Likes
14
Rating
0
P
PrintablesNathan

Hyundai Kona N Rear Logo Morse Code

This is a badge to replace the H logo with the Morse Code logo on a Hyundai Kona N rear. Print Settings Printer Brand: Flsun Printer: Flsun V400 Rafts: No Supports: No Filament: Inland PETG Category: Automotive

Downloads
36
Likes
5
Rating
0