Search results: netgear

Sort order

262 models

P
PrintablesBrian Berkley

10in-Rack-Netgear-GS108

10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…

Downloads
1,117
Likes
76
Rating
4.43
P
PrintablesChillora

Netgear GS308EP 10 inch Rackmount

3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)

Downloads
951
Likes
52
Rating
4.88
P
PrintablesJeffWDH

Netgear Nighthawk M6 Pro Wall Mount

A wall mount for the Nighthawk M6 Pro. Has a cutout so you can plug in power, Ethernet and antenna connections. Print with the back facing towards the build plate and with supports. For supports that are painless to remove, use these…

Downloads
815
Likes
34
Rating
5
P
PrintablesPicoNeslr

Netgear ProSafe GS108E v3 10" (& 19") Rack Mount

This is a 10" rack mount for a Netgear ProSafe GS108Ev3 network switch. This model assumes you have the 4 round stock rubber feet under the switch. Printed in PLA with a 0.4mm nozzle using 0.2mm SPEED preset with adaptive cubic infill.…

Downloads
557
Likes
37
Rating
0
P
PrintablesSquirtle

Netgear 5 Port (GS105) Switch holder

The switch can be mounted under a table, on the wall or wherever you can fit 2 screws in it If you are looking for the same holder for the 8 port switch: https://www.thingiverse.com/thing:3278568 Print instructions Category: Computer…

Downloads
509
Likes
61
Rating
4.8
P
PrintablesJan-E.de

10" Rack Brackets (1 U) for Netgear GS110TP POE Switch

A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…

Downloads
481
Likes
45
Rating
4.5
P
PrintablesRushman

Netgear Orbi 970 Series (WiFi 7) Router/Satellite) Wall Mount

I didn't want to spend $40USD per mount for the netgear wall brackets so I made my own. I printed in prusament PETG with a .6mm nozzle using draft fast settings in prusa slicer. They are beefy as the routers/satelites are quite heavy. YOU…

Downloads
451
Likes
19
Rating
5
P
PrintablesAxel

NETGEAR GS308E 10" Rack Mount

A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…

Downloads
450
Likes
22
Rating
5

Netgear GS305 switch under-desk mount

Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance

Downloads
447
Likes
54
Rating
5
P
PrintablesChriswak

Netgear GS116 Switch Rackmount Adapter

I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…

Downloads
440
Likes
39
Rating
5
P
PrintablesLappland Expat

Netgear Nighthawk M1 wall mount

For mounting a Netgear Nighthawk M1 on the wall. Update 2023-03-02: Version 2 has some nicer fillets and don't hide the feet that can be removed to access the connections for the external antennas

Downloads
422
Likes
18
Rating
0
P
Printables3DPTR

Netgear GS316/EP Switch 19" Rack Mounting Brackets

This is rack mount tabs for a Netgear GS316 series switch. The rear bracket uses M3 screws to replace the existing screws in the back of the switch.

Downloads
408
Likes
29
Rating
5
P
Printablesmkingery

Netgear CM600 / CM1000 Wall Mount

I needed to rework and mount as much of my networking gear as i could which necessitated removing the modem's stand and constructing a wall mounted solution. The most important goal for me was to make the simplest print i could while not…

Downloads
387
Likes
25
Rating
5
P
PrintablesTheOvenCook

NETGEAR Switch DIN rail mount - single and double stacked

Great for most NETGEAR switches, 5 port, 8 port and 16 port… Not tried anything bigger. Probably works with other brands too.

Downloads
380
Likes
51
Rating
5
P
PrintablesBenni

Netgear GS308 Switch wall mount

Wall mount (invisible screws) for Netgear Switch GS308T

Downloads
376
Likes
27
Rating
5
P
PrintablesOrnotermes

10" rack mount with keystone for Netgear switch GS108

10" rack mount for Netgear ProSAFE Gigabit switch GS108 (maybe others). It has one kestone slot on each side of the switch. Designed to fit my 10" 2020 rack. When inserthing the switch the sides will need to flex out a bit in the rear,…

Downloads
327
Likes
38
Rating
5
P
PrintablesB.Erol

Netgear Nighthawk M5 Station and Wall Mount

This is a case for the Netgear Nighthawk M1, M5 and M6 that can be placed on a table or mounted on a wall. To mount it on the wall, a wall bracket is attached and the case with the device is slid into it. This allows the device to be…

Downloads
317
Likes
15
Rating
5
P
PrintablesCHARL13

Netgear GS108 Multiboard Bracket

Brackets for mounting a Netgear GS108 switch to the Multiboard mounting system. You will need to print 4xHandsOnKatie_Standard-Underware-Connector from the original remix file library.

Downloads
312
Likes
54
Rating
5
P
Printablesl3LueSkull

Netgear GS105 Lan Switch Holder

This is an Easy to Print Small Holder for the Netgear GS105 Lan Switch I was Searching for a Similar Model in the Web but didn't Find anything (maybe I searched not good enough) well whatever, I decided to just make my own, the Result You…

Downloads
303
Likes
19
Rating
5
P
PrintablesMario

Netgear SG mountingbracket

Hello together, I needed a fixation bracket to mount my netgear switch under my printer enclosure. Happy printing :)

Downloads
281
Likes
42
Rating
5
P
Printablesmasiakla

Netgear GS305EP 10inch rack mount

Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…

Downloads
267
Likes
22
Rating
5
P
Printableskbob

Under-shelf mount for Netgear 8-port Ethernet switch

This bracket holds a Netgear GS308 Ethernet switch to the underside of a shelf. Uses four wood screws to attach. Print instructions I used PETG. PLA would probably work too. Print settings are not critical -- it didn't need support or…

Downloads
254
Likes
51
Rating
4.67
P
PrintablesRvdH

Netgear GS108E Wandhalterung

Über den Parameter “Spalt” kann der Freiraum für den Switch verändert werden. In der ersten Veröffentlichten Version stand er auf 0,2 mm, jetzt ist er 0,5 mm und liefert etwas mehr Freiraum.

Downloads
253
Likes
13
Rating
0
P
PrintablesFirstGuardian

Netgear GS305 GS308 mountingbracket

Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm

Downloads
248
Likes
22
Rating
5
P
PrintablesEHY_3dp

Netgear GS308 Series 10-inch Rackmount

Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)

Downloads
247
Likes
16
Rating
5
P
PrintablesRvdH

Wandhalterung für Netgear Nighthawk M6

Sollte der Router zu eng in der Halterung sitzen ändern Sie den Parameter “Spalt”. Zur Zeit steht er auf 0,3 mm. Mit 0,4 oder 0,5 sollte der Router leicht in die Halterung ein- und ausführbar sein. Meine Halterung ist im Wohnmobil…

Downloads
239
Likes
13
Rating
5
P
Printablesthomasvnl

Netgear GS308 Switch Stacked Wall Mount

Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…

Downloads
234
Likes
25
Rating
5
P
PrintablesSquirtle

Netgear 8 Port (GS108) Switch holder

This is a remix of the design https://www.thingiverse.com/thing:1322695 . For a smoother fit I made it 1mm bigger in the inside and added a honeycomb pattern to it. The switch can be mounted under a table, on the wall or wherever you can…

Downloads
227
Likes
33
Rating
0
P
PrintablesCleansweep9

Netgear Orbi Wall Mount

I liked Rehtori's Netgear Orbi Wall Stand, but wanted mine a little smaller and closer to the wall. I made an open grid on the bottom to maintain ventilation. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament:…

Downloads
227
Likes
17
Rating
5
P
PrintablesBrent

Netgear GS116 Switch Rack Mount Ears / Wings

I found various examples of mounts for this switch but all were bulky, used a ton of filament, or didn't use the factory mounting holes. I had one of the original metal ears that came with the switch and used it to model these. The result…

Downloads
225
Likes
11
Rating
5
P
PrintablesJosh

Netgear GS305 10" Rack Mount

10" server rack for Netgear GS305 5 port switch. Pretty simple design, I printed face down using mouse ears.

Downloads
221
Likes
11
Rating
4
P
PrintablesNirvash

Netgear GS108E mount bracket

A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…

Downloads
211
Likes
23
Rating
5
P
PrintablesLeVieuxCampeur

Netgear Switch Holder

Allows you to fix and hide a network switch under the desktop or a shelf. This one has been designed for a Netgear GS108 switch but it should work with other netgear devices with same dimensions. Printed with 0.6 nozzle with orange…

Downloads
207
Likes
21
Rating
4
P
PrintablesIron Momo

Netgear GS108 10in rack

10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the design from @BrianBerkley. Printed face down, 2 versions are available to be used with/without M3 metallic threaded inserts. 2 screws M3x10 are required…

Downloads
205
Likes
27
Rating
5
P
PrintablesJsmaz3

Netgear CM1000 1U Rack mount

i made a rack mount for my cm1000 modem, it mounts right now with zip ties in my case but you could probably stick it on with vhb tape as well. i just made it simple and didn't want it to be complicated with multiple parts. also the…

Downloads
205
Likes
23
Rating
5
P
Printablescoolgrey5

Netgear ORBI 753 wall bracket

I needed a decent wall mount for a Netgear Orbi so came up with this. Printed in Prusament Signal White PET-G it holds the router nicely and there is room at the back to feed the cables through the slot in the base. Print Settings…

Downloads
203
Likes
17
Rating
5
P
Printableswiefeli

Netgear 8 Port (GS108) Switch wall mount

This is a remix of the design https://www.thingiverse.com/thing:1322695 . I seperated the model and added some support, so you can print it also on smaller printers and you are more flexible to mount. You have to mirror the parts in your…

Downloads
202
Likes
25
Rating
0
P
Printablesmariospinaci

Ikea Skadis - Netgear Switch 8 port Unmanaged Gs308

Support to be able to hang Netgear Switch 8 port Unmanaged Gs308 stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.

Downloads
198
Likes
13
Rating
5
P
Printablesahlston

Netgear Nighthawk MR1100 Cradle

Mount for the Netgear MR1100

Downloads
179
Likes
15
Rating
4
P
PrintablesRonald Queloz

Netgear-GS108-Mount-10-in-rack

This is a rack mount kit for the Netgear GS108 switch designed for a 10-inch rack. The kit comprises three parts that can be 3D printed without the need of support. The clamps must be secured to the main part using two small screws. I…

Downloads
176
Likes
16
Rating
5
P
Printablesopentux

NETGEAR or MikroTik DIN HOLDER

Dear makers, we would like to share our DIN holder for switch NETGEAR or MikroTik Routers.GS308E. Consist of left and right holder. Overall depth ater installation is 81mm from DIN rail. Compatibility: NETGEAR (26 mm thickness): GS308E…

Downloads
166
Likes
22
Rating
5
P
PrintablesChriswak

Netgear GS108 Switch Rackmount Adapter

I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…

Downloads
162
Likes
18
Rating
0
P
PrintablesBazzalight

Under Desk Saddle Mount for Netgear 8 Port Switch

It was designed to attach to the underside of a desk. There are lugs that fit the bottom screw holes of the switch. It also has hooks to clip in the cables to keep it somewhat tidy. If you have a 200x200 build plate like me then rotate it…

Downloads
153
Likes
18
Rating
0
P
PrintablesEvilProphet

ESRack - Module - Netgear GS108GE

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Downloads
153
Likes
16
Rating
5
P
PrintablesLeapnlarry

Netgear Nighthawk MR100 Hotspot Cooler

The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…

Downloads
146
Likes
10
Rating
4
P
PrintablesCharly BEGOOD

Netgear GS308 vertical holder

You can fix it with double adhesive face or 2 screws Printer settings : Material : PLA Infill : 20% Support : no

Downloads
146
Likes
19
Rating
4.5
P
Printablesunwohlpol

DIN-rail mount for Netgear Switch

It's a DIN-rail mount for th GS305v3 from Netgear

Downloads
144
Likes
17
Rating
0
P
PrintablesLeon

Ikea Skadis Netgear 5 Port Switch Mount

The print in the picture was a misprint, but it still worked, so I kept it.

Downloads
140
Likes
11
Rating
0
P
PrintablesEd Yu

Netgear CM1000v2 Modem - Wall Mount

Wanted to mount this guy to a board, did not like the goofy stand it came with. This would possibly work with other versions of this model.

Downloads
138
Likes
11
Rating
0
P
PrintablesChriswak

Netgear GS105 Switch Rackmount Adapter

I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…

Downloads
137
Likes
15
Rating
0
P
PrintablesMAKERTEAM®

NETGEAR Nighthawk M6 Pro Router Mount

This mount has especially been made for the NETGEAR Nighthawk M6 Pro (MR6450) Router. Just mount it to any vertical surface and let the router slide in from above. It has a double rear wall with ventilation holes for thermal convection.…

Downloads
135
Likes
12
Rating
0
P
PrintablesJP Guitars

Netgear GS308 Under Shelf Mount

I wanted to move my switch off of the shelf to make it easier to access, so I designed an under shelf mount. It prints fine without supports if you print it with the back downwards. I've included CAD files if you want to remix it.

Downloads
133
Likes
13
Rating
5
P
PrintablesGulianrdgd

10-inch Rack Mount | Netgear GS105 Switch

Remix from 6 inch rack to 10 inch rack

Downloads
131
Likes
8
Rating
5
P
PrintablesMcWuragu

Wall mount for Netgear GS105

This item is a small wall mount for the Netgear gs105 LAN switch. It is designed for the using of tesa powerstrips for the wall montage. It can be used for vertical and horizontal mount. Print Settings Rafts: No Supports: No Resolution:…

Downloads
131
Likes
8
Rating
5
P
PrintablesMint

Netgear GS316EPP/GS316EP 16 Port Switch holder for 19 inch server rack 1U

I found that most 3D printing 19 inch server rack holder designs for Netgear GS316EPP and GS316EP 16 Port Switches were either too large for my heated bed (23.5 x 23.5cm) or had too much unused space . So I decided to make one of my own,…

Downloads
130
Likes
10
Rating
0
P
PrintablesStanislav U.

10" rack mount for Netgear GS305E switch (1U)

This mount holds the Netgear GS305E switch in a 10" rack. You have to slightly force the switch into the mount. This is deliberate for the switch to stay in place even when yanking the cables. The switch is mounted assymetrically, I've…

Downloads
129
Likes
13
Rating
0
P
PrintablesJeffH

Netgear Nighthawk CM2000 Cable Modem Mount

Got my Netgear CM2000 Cable Modem, and for some reason it seems Netgear wanted it to look "sexy", which means it has a bunch of weird angles, and takes up a bunch of unnecessary space. I found a mount (…

Downloads
128
Likes
8
Rating
4.5
P
PrintablesLegufix

Wallmount for NETGEAR GS305 LAN Switch

Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…

Downloads
127
Likes
14
Rating
0
P
Printablessteve

Skadis 40mm to 45mm width adaptor (e.g. for Netgear GS105)

The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern. The holes are 3.5mm to be tapped M4 and the tolerances…

Downloads
126
Likes
15
Rating
5
P
PrintablesCraftingWorksNO

Mounting bracket for JFS524 Netgear Switch

Here is the STL and the Fusion file incase you need to make any modifications to it. I printed in PLA at 20% infill. The screw holes on the side of the switch are M3. I used 8 total M3x8 screws and 4 #6 wood screws to mount to the bench.…

Downloads
124
Likes
31
Rating
5
P
Printablesmukul

Netgear Network Switch Vertical Stand

Simple vertical stand for a Netgear Network Switch.

Downloads
122
Likes
13
Rating
4
P
Printablesshanelord

Netgear Nighthawk M5 Wall Mount

This is a wall mount bracket for the Netgear Nighthawk M5 (M5100/M5200) I could only find M1 and M2 brackets and none were suitable for my needs. Designed this in Tinkercad. M5 slips in the back into the pocket, then the rear spacer slips…

Downloads
121
Likes
6
Rating
0
P
Printablesfuzzymakes

NetGear GS308E 10" Mini Rack

Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…

Downloads
119
Likes
4
Rating
0
P
Printablesgeektoybox

Netgear GS205 Switch Wall Mount

Downloaded a mount and hated the print so I designed my own. Fits like a glove. If your printer isn't finely tuned, I'd probably experiment with 101-102% scale printing. I just printed it at 2 shells and 10% infill using Prusament PLA…

Downloads
118
Likes
12
Rating
5
P
Printablesvvision

Netgear Switch GS108E Rack mount

Rack mount ears for Netgear GS108E switch. Remember to hold switch while pluging cables to prevent it from moving to the back. I've added a hole on each ear for the switch feets. Inspired by: https://www.thingiverse.com/thing:249851 Print…

Downloads
116
Likes
15
Rating
0
P
PrintablesFranz

Netgear Switch Wall-Mount [GS308, S350 Series]

You need: 1 of each of the 4 models 4x M3 heat set inserts 4x short M3 countersunk screws 4x countersunk screws for your preferred wall mount solution Print the outside brackets with the outside on the build plate, so no support is…

Downloads
115
Likes
11
Rating
5
P
PrintablesBLawl

Netgear Hotspot Case (MR6110) - Nighthawk M6

About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…

Downloads
114
Likes
9
Rating
5
P
PrintablesGabriel Martins

Netgear GS305v3 Rack Mount (10" or 19")

Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic. Use a Brim, the side where there is no holes…

Downloads
114
Likes
15
Rating
0
P
Printablespdicko

Rack Mount Bracket for Netgear GS308PP 8-Port Network Switch

This is 19" 1U rack mount bracket for a Netgear 8-port Network Switch (GS308PP). It's pretty beefy because it will be in a portable case and need to stand up to a lot of rough handling. I printed this with PLA on a Bambu Labs A1 Mini, so…

Downloads
112
Likes
18
Rating
5
P
PrintablesAX

Netgear GS110EMX 10“ Rack Ears

Some Rack Ears for the Netgear GS110EMX Network Switch to mount in a 10“ Rack. Two Variant are available to mount. The normal 1U Variant and the weird 0.5U Version. In my Case it worked perfectly but it may not in yours… I would suggest…

Downloads
112
Likes
16
Rating
5
P
PrintablesNick Fajardo

Netgear GS308 Mounting bracket for Leviton SMC

Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts

Downloads
109
Likes
3
Rating
1
P
PrintablesQuinton Graham

Netgear gs308 Modular rack mount

Beware this is only the right side of the modular rack model. Make sure you know this before printing. Use supports (organic is better)

Downloads
107
Likes
6
Rating
0
P
PrintablesBryan Peters

Netgear GS308E Single Piece Mount

An improved mount that prints in one piece and will securely contain a Netgear GS308E switch. Uses set screws. Will continue to add parts and pictures as I build my rack. Print face down with supports enabled. Four m3 screws are required,…

Downloads
106
Likes
15
Rating
0

Netgear GS105 UnderDesk mount Easy2Print

Not much to say about this Thing :-) It's dead easy to print, use 4 Wall_Layers, infill 20%, no support if printed rear side to plate. As always: I added Autodesk Fusion file + Step - modify as you like. Print Settings Printer Brand:…

Downloads
105
Likes
10
Rating
5
P
Printablesrehtori

Netgear Orbi wall stand

I love my Netgear Orbi setup (powerfull router + satellite), but was a bit disapointed that it was so difficult to put in a wall. I have built rj-45 sockets high in the wall for a good router placement, so hanging it into the wall was a…

Downloads
102
Likes
9
Rating
5
P
PrintablesChriswak

Netgear GS305P Switch Rackmount Adapter

I prefer to keep my switches off the shelves and add them to a standard 19" server rack instead. I recently picked up this GS305P and adapted a rackmount adapter for it. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x…

Downloads
100
Likes
10
Rating
0
P
PrintablesPhilip Hermes

Switch Rack Mount (Netgear GS105E)

Small single-sided 1U mount for a Netgear GS105E switch, suitable for a 10" rack. The switch measures 10.1 x 9.4 x 2.6 cm. Also fits other switches of the same size.

Downloads
99
Likes
6
Rating
0
P
PrintablesTheAppleFreak

Netgear GS305EP 10" Rack Mount with Keystone Connectors

I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…

Downloads
96
Likes
10
Rating
0
P
Printablescrazybob1215

6-inch Rack Mount | Netgear GS105 Switch

A 6-inch rack mount for the Netgear GS105 and similar sized switches/hubs (94mm wide x 100mm deep x 26mm tall + 3mm feet) Inspired by and compatible with Mauker's series of 6-inch rack accessories and madmax890's models for the series.…

Downloads
93
Likes
10
Rating
0
P

10" Rack Netgear GS110EMX mount

10" Rack Netgear GS110EMX mount

Downloads
88
Likes
17
Rating
0
P
PrintablesJgreuh !

Netgear GS108 Skadis holder

A simple system of hooks to hang a Netgear GS108 switch ( https://www.netgear.com/be/business/wired/switches/unmanaged/gs108/ ) on an Ikea Skadis pegboard ( https://www.ikea.com/be/en/p/skadis-pegboard-black-50534378/ ).

Downloads
84
Likes
5
Rating
4.75
P
PrintablesBarrnet

Underdesk mount for the 5 ports switch Netgear GS305

Glue or double-sided tape is needed for sticking it under your desktop . Could be printed in PLA without support. Update : I uploaded a new model with a C clamp for a mount without tape or glue. The clamp have an height of 80mm. If you…

Downloads
84
Likes
14
Rating
0
P
PrintablesEvilProphet

ESRack - Module - Netgear GS105GE

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Downloads
84
Likes
16
Rating
0
P
PrintablesRobert S.

2/3u 10" Rack Netgear Holder (GS308E,GS108E)

If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…

Downloads
82
Likes
8
Rating
0
P
PrintablesCreamy

Netgear GS308EP 10 Inch Rackmount Modified Faceplate

The original file works/fits great but I wanted the face plates to match the Dell OptiPlex file from @TimPrints_686384

Downloads
82
Likes
5
Rating
0
P
PrintablesPablo

10" Rack Mount 1U | Netgear GS108

If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS108 This bracket is designed specifically for the Netgear GS108 switch, offering a clean and secure fit in your 10-inch rack setup. Features…

Downloads
82
Likes
4
Rating
0
P
Printablesmaker-tgin

Netgear GS308 Wall Mount

The model provides a screw-in wall mount bracket for your NETGEAR GS308 switch. Printing details: Supports are required for the bottom lip of the bracket Print at 0.2mm Use PETG for flexibility

Downloads
81
Likes
4
Rating
0
P
PrintablesTim Ropp

Wall mount for Netgear LM1200 LTE modem

I wanted to mount my LM1200 LTE modem on the wall, but I hate the keyholes it has on the back. They're too small and require small screws. Instead, I made a quick model. This has two holes for screw mounting (and clearance between the…

Downloads
80
Likes
5
Rating
5
P
PrintablesMartin K @ IFA

Netgear GS208 wall mount

printed in 0,2mm PET with supports on.

Downloads
77
Likes
9
Rating
5
P
PrintablesPablo

10" Rack Mount 1U | Netgear GS308EPP

If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS308EPP This bracket is designed specifically for the Netgear GS308EPP switch, offering a clean and secure fit in your 10-inch rack setup.…

Downloads
75
Likes
6
Rating
0
P
Printablesouscubagrad

Netgear Nighthawk M6 Pro Case

I made this case from scratch for my Netgear Nighthawk M6 Pro to protect it from the hazards of baseball games. It has served me well and has survived several falls and drops. Lid secures with several very small screws.

Downloads
74
Likes
2
Rating
0
P
PrintablesMeesterEd

Wall mount bracket for Netgear fs605 switch & others

I took the Wall mount for Netgear mini 5-port switch by nigelayres, and scaled it up and hollowed out a 115mm x 149mm opening to allow for my fs605. Added screw mounting holes as well. Print Settings Printer Brand: FlashForge Printer:…

Downloads
73
Likes
3
Rating
0
P
PrintablesTapRackBang

Netgear 6000450 MIMO Antenna Mount

I wanted a way to easily aim the Netgear 6000450 MIMO Antenna which is a directional antenna. The keyholes were added to the bracket hopefully to allow the suction cups that came with the antenna to be utilized if you so desire. I haven't…

Downloads
73
Likes
5
Rating
0
P
Printablesalex

Rack ear for Netgear GS316 for mounting in 19" rack

Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…

Downloads
72
Likes
2
Rating
0
P
Printablesmintonette

Netgear Nighthawk Switch Wall Mount GS810EMX

Wall mount for the SX10 10-port multigigabit Nighthawk gaming switch - because Netgear were too preoccupied adding LEDs and as many angles and as possible to this thing, they forgot to add a couple wall mount holes in the bottom, like…

Downloads
72
Likes
7
Rating
0
P
Printablesslumpy

NETGEAR GS305P modular 19 inch rack mount

Remixed Maukers great model to accomodate a NETGEAR GS305P switch. Printing in ABS works well if you include an inner and outer brim. Added both versions (left and right). Remove the rubber before insert the switch into the mount.

Downloads
71
Likes
7
Rating
4
P
PrintablesSuperPilot

Netgear CM1200 Modem Rack Mount

I'm sure other HDHomeRuns could also be used if the dimmensions of them havenet changed but it was designed around the Connect Quatro that I have. The vertical stand has to be removed from the Netgear CM1200 and the modem helps keep the…

Downloads
71
Likes
2
Rating
0
P
PrintablesMartin Jurů

NETGEAR GS105 stand

NETGEAR GS105 stand

Downloads
71
Likes
14
Rating
0
P
PrintablesRynoShark

Netgear MS305/MS308 2.5 GbE Bracket for Structured Media Centers

SMC bracket for mounting [Netgear MS305/MS308 Multi-Gigabit 2.5 GbE switches into common Structured Media Cabinets. Supported devices include: Netgear MS305 5-port 2.5 GbE switch Netgear MS308 8-port 2.5 GbE switch This includes printed…

Downloads
68
Likes
3
Rating
0
P
PrintablesSib6019

NETGEAR GS605 Wall Cradle Mount

Resized to fot the GS605 Switch firm fit. Printed on QIDI Plus 4. Used 0.4 nozzle with the 0.16mm preset. 3 walls and 15% infill, use QIDI Black PETG Tough filament w/ supports. If you download it, please hit that like button.

Downloads
68
Likes
8
Rating
0