7,660 models
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.4 mm. The dial has a…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of hex-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe square-shaped…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Hard to print? Try this one This is another take on the idea of a quick-to-print phone stand to make lots of and put around the house. If you don't need your phone to be elevated and are looking for something that takes up less space,…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
A Small Print in Place Slider Fidget, which takes only 13 Minutes to print. If it doesent work right off the Plate, put some force into sliding it and it should come loose. No AI was used in the making of this model.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
15 Minute calibration test. Used to compare Prusa Mk3S, Prusa MINI, Ender 3 Pro, PLA, PETG, ABS, ASA, TPU on youtube. You can see the results here: https://imgur.com/gallery/AVIMRUl The overhangs are 10,20,30,40 degrees. The hex hole is…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Perfect nut gauge for your toolbox You can print this in one or two colors.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
These page markers can be used to hold the page to favorite recipes, important pages that you want to refer back to in a book, favorite quotes, and to hold the page for important study material. They are a great way to help annotate a…
Print approx. €0.04–€0.04 excl. taxPreliminary estimate for PETGSource material: PET
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Hey there! Here's some cool info about the Scout symbol, the fleur-de-lis. Sir Robert Baden-Powell, the founder of Scouts, chose it as the official symbol. It's all about the Scout code: duty to God, others, and yourself. The fleur-de-lis…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Another big nut and bolt with a knurled finish
Print approx. €3.69–€4.50 excl. taxPreliminary estimate for one variant
I wanted to give my 20-minute phone stand a more interesting design and solve the problem of it being easy to knock over in portrait mode. Making the base hexagonal seemed like the perfect option. As an added bonus, there is now nothing…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
Coconut Capybara – Burbaloni Loliloli edition! This adorable little creature is half coconut, half capybara, and 100% brainrot joy. Inspired by the Italian meme universe, this chill buddy is perfect for fans of the absurd and wholesome. ✅…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Um geplante Werkzeughalter am Prusa Mini+ zu befestigen, brauche ich Hammermuttern, natürlich selbst gemacht. Genutzt habe ich PETG, aber PLA sollte auch gut gehen. 15.06.2024: Modell zum Selberschneiden des M5-Gewindes hinzugefügt.…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the Bag Clip by Andrei. I love the design and in the spirit of over-engineering a bag clip, I added a hole for an M3 bolt and nut in place of the original's printed dowel. It uses a standard 15mm long M3 bolt and M3 nut…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Valknut symbol with runes - Two models diameter approx. 100mm Printing: Supports: NO Layer: 0.2 mm Filament change at 11th layer
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Valknut Symbol diameter approx. 100mm Printing: Supports: NO Layer: 0.2 mm Filament change at 11th layer
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
A simple bolt and nut.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Simple yet useful. I made in PETG Infill: 20% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
When my Friends and family members ask about what else can be 3d printed that isn´t a toy, (I mostly print toys and puzzles at home) I show them what I print for work, (mostly tools and gages) that's why this little and useful item came…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Protect and or decorate a screw head of wood screws, bolts or nuts with these caps. For countersunk or flat head screws, use the ring with the lid. The lid clicks on the ring. For the M3, M4, M5, M6, M8, M10 hex bolts and nuts use the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Creating a replacement nut that is not available. Suitable pure round hole 25-27mm. Need to insert M5 nut Printing: Material: PETG Infill: 100% Perimeter: 2 Supports: yes
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €9.40–€11.49 excl. taxPreliminary estimate for one variant
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
M42 x 100 Srcrew and Nut Fidget Toy I designed this screw a few years ago as a little bit of CAD practice. Since then i enjoy having it on my desk. I somehow looks nice and is also satisfying to play around with. Enjoy one yourself! :-)
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
M10 thread that is printable and smooth. Fusion files 360 included (.f3d) Why I made it: A couple of days ago, I was looking for a part with a decent thread. I found one, uploaded my make, and gave the creator a thumbs up for the nicely…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
cable gland PG16 NUT
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
T-Nut drucken mit PETG infill 100% ohne Stützen Düse: 0,4mm Schichthöhe: 0,2mm Die Fläche mit dem Sechskant auf das Druckbett. Zwischen Sechskant und dem Loch ist eine Drucklage um das Loch drucken zu können. Nach dem Druck einfach mit…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Fully Functional Nuts and Bolts for Kids Screwdriver Recommend to print in PETG for strength Screwdriver Available Here: https://www.printables.com/model/345082-kids-screwdriver-system-for-boys-and-girls Spanner/Wrench Available Here c/o…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for PETGSource material: PET
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Replacement Rubbermaid / Gott gas can "nut" screw cap for a 1.5 gallon "Gott" (Rubbermaid) plastic gas can. Non-standard / custom threads made this a fun* challenge. Perseverance and a couple more Youtube lessons in how to use Fusion 360…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PETG with 40% infill and supports. In meinem Profil ist ein passender Messuhrhalter zu finden. In my profile you can find a suitable dial gauge holder.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Meet the Mini Nutcracker — a tiny version of the classic Christmas icon! 🎄 Height: 28 mm Perfect for festive table settings, mini displays, or dollhouse decorations A charming little soldier ready to bring a touch of Christmas tradition…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Loosely modeled off of this toy I found on Amazon . I wanted another reason to experiment with vase mode so I designed all the nuts to be printed in vase mode while still having quite a bit of durability, which is why I designed the ribs.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Turning knob 35x15mm for an M5 screw inside and outside the nut Drehknopf 35x15mm für eine M5 Schraube innen und außen die Mutter
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
I had to adjust the hour and minute hand's holes to snuggly fit the clock mechanism that I bought on Amazon. Figured this will save someone the time it took me to tinker with this. Here is a link to the clock mechanism I bought (5/8):…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Remix with the hole for an M4 hexagon nut and placed in the right print orientation. I suggest printing it with 100 % infill for good strength. Feel free to like, download and follow. If you want check my other models. Happy Modeling and…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Cifial faucet nut for model 289.145.620.nl Made this for a person who said they were hard if not impossible to find. Evidently the tall stock plastic nut was no longer available from manufacturer. The thread is not quit standard 16 tpi,…
Print approx. €3.55–€4.33 excl. taxPreliminary estimate for PETGSource material: PET
This spare part is similar to the original part. Material: PETG Layer height: 0,1 mm - 0,15 mm (recommended). Infill: ≥ 80% Supports: Yes. I hope you find it useful.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
I was learning how to model custom nuts and bolts in Fusion 360 when I had the idea to create this fidget toy. The bot has a stopper at the end to keep the nut from spinning off. I printed the nut and bolt with PLA at 0.20 layer height…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
I found this nice model here in Printables https://www.printables.com/model/886832-subaru-wheel-lock-storage-box from zymurgtechnician and adapted it to my need Locks and key from my Kona seems to be a bit bigger than the Subaru ones. So…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Remix GoPro Tripod Mount with a pocket hole for a 1/4" Hex Nut + remix for Insert Nut
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
I liked SmilingImpact's 10-24 bolt and nut design but needed a nut short enough to fit 1/8 inch (roughly 3.5mm) nut slots. This nut remix is made to be 3mm tall so it fits easily into slotted parts. From testing, 0.1mm layer height is…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is a round lug nut cover I made for semi trucks with 33mm lug nuts.
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
This is a remix of the Modular Trailer Hitch Cover by rkxone on Thingiverse. I've added an additional set of faceplate mounting holes for more options when designing faceplates. The m3 nuts are also embedded in the print. Stop the print…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
(pour le français, voir plus bas) Fully Printable V2 Balisong Butterfly Knife with M3 and M4 nut holes. Please go to the original projet to download the blade. You can use 2 M3x10 and M4x10 screws. Settings Nozzle : 4mm Resolution : 0.1mm…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Casse noix a vis aucune noix ne lui résiste, simple et rapide. Screw nut cracker no nut resists it, simple and quick. Impression en PETG a 40% en 020.
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
Do you love the Honeycomb Storage Wall system (originally created by RostaP) but feel a little uneasy with the inserts being either difficult to insert and remove or too loose? I wanted to come up with some sort of a locking system and…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Place it on the big flat side and print away. Supports are not needed!
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
For the construction of my enclosure, I designed 3d printable sliding blocks. Why are these special, you ask? Quite simply, you can also insert the slot nuts afterwards. Because of the flexible pin the sliding block stays in place. The…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
Falls ihr zu spät dran seid oder es vergessen habt: Last-Minute Weihnachts-Geschenkgutschein für 3D-Drucke in 4 Versionen (1 Druck, 2 Drucke, 3 Drucke und 4 Drucke). Farbwechsel vor den letzten beiden Schichten, wie beigefügte Druckdatei.…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
6mm Knob using Rivet-Nut Insert, Nut-Sert, or Nut-Cert I wanted some knobs that matched the blue CF arm. https://www.bulletpointmountingsolutions.com/ Here is my fix. I used 3D Fuel PRO-PCTG (Cobalt Blue)…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Wingnuts M6 and M8 - the nut is inserted after the model is printed. Křídlové matice M6 a M8 - matice se vloží po vytištění modelu.
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the following: https://www.printables.com/model/106585-wera-wrenches-395-ho7-sm-wall-mount-ikea-skadis-pe https://www.printables.com/model/139416-wera-scredriver-holder-for-workshop
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
Designed to be printed without support. For Valentine's day I wanted to see three hearts woven together in the style of the Valknut. Other heart designs I have made.
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Nice and easy nut cracking solution.
Print approx. €5.05–€6.17 excl. taxPreliminary estimate for PETGSource material: PET
Remixed the insert to attach the HSW on threaded M5 rods
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Couldn't find other makes of a half inch counter nut, so here it is… No support needed.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Modelo creado para una empresa de fotografía como detalle al entregar las sesiones navideñas junto con una placa con logo, Perfecto para decorar el árbol de navidad. Impreso en MK4S con MMU3 utilizando una boquilla 0,4 ( con 0,25 queda…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
print with skirt, and i hope its usefull for you
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is the recreation of a very old toy I used to make as a little boy. I “stole” a large clothing button from my mothers sewing basket, and added a piece of string. Spinning around the button until the line broke…. The modification I…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
I didn't have the right length M2.5 screws, my M2.5 threaded inserts were press fit and I didn't want to wait for more hardware to come in, so I adapted the L nuts to what I had on hand. You will need: 4 x “M3nS” - M3 DIN 562 square nuts…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Pistachio/Peanut Bowl 3x hole
Print approx. €5.04–€6.17 excl. taxPreliminary estimate for one variant
Hammerkopfmutter T-Nut Mutter mit M4 Gewinde für 30x30 Aluminumprofile Nut / Slot / Series / U 6
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Huge coconut-like flower pot. Looks like an open coconut. Easy scallable aswell.
Print approx. €5.56–€6.80 excl. taxPreliminary estimate for one variant
While assembling an 8020 15 Series assembly in the lab, we noticed that the 5/16" Slide In Economy T-Nuts we were using were not staying in place well. I designed a quick part that could hold the T-Nut in place during assembly. This will…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Coaster for drinks with Valknut design. 95mm square, 2.5mm thick. You will need to add a layer change to get the two colours when you slice it. Prints fine in PLA with 0.4mm nozzle, 0.2mm height. I used 15% infill.
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Krytka matice M6 včetně velké podložky. Použito v bytovém jádře v koupelně, šrouby drží světlo v chodbě. Doporučení k tisku: Vynucené podpěry na místě podložky, výplň 15%, materiál PLA.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Small form factor IPad/Tablet stand for your Ikea SKADIS wall utilizing the T-Nut mounting system . Print orientation should be on the side, might need a brim to stay on the buildplate. I added some foam to the stand to keep the IPad from…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
These T-Nuts print on their side. Slip an M3 nut into the recess and you are ready. The best way to fit the T-nut into the extrusion is to thread a long bolt into the T-Nut and wedge the nut into place. Once in the channel the T-Nut…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
A Nutcracker, when I used it on a nut, it was able to crack it, but you have to push it a few times forward and backward.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
M4 Lock Nuts set of 6 for Neptune 4 Max
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
A case designed to efficiently store a Makita Macpac 2 cordless screwdriver, along with nuts and adapters, in a space-saving manner. No supports needed.
Print approx. €6.75–€8.25 excl. taxPreliminary estimate for one variant
Great guitar pick for any guitar (: Printing time is only 2 MINUTES!
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
very usefull
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This is a mount for holding a Molex Hand Crimp Tool on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports are…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
##German Version / Deutsche Version:# Nachdem ich meine Satellitenschüssel vom Dach des Wohnmobils entfernt hatte, hatte ich eine offene Kabeldurchführung. Der provisorische Verschluss war keine Augenweide, also: kurz vermessen: 80mm…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
I made this thing to enter the Low Poly contest. It is a donut (standard size of 80 mm according to some manufacturers) with rice inside to make it more fidgety.
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Bei unserer neuen Pergola war keine Möglichkeit vorgesehen etwas auf den Querträgern aufzuhängen wie z.B.: eine Beleuchtung oder etwas Deko. Da hab ich gleich etwas konstruiert und gedruckt. Und zwar Nutensteine mit passender Ringschraube…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Wera nutdriver set caddy
Print approx. €11.96–€14.62 excl. taxPreliminary estimate for one variant
You need a M3 bolt + M3 threaded insert (OD 5mm, length 3mm…8mm). After printing, melt the threaded insert into the piece. Print “upright” for best quality (I found other orientations made the nut not fit exactly). No supports needed.…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Remix cinknuté kostky s padající 6. Zde padá častěji 1.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I wanted to attach a filament bag to the side of my printer enclosure to tidy away all the waste filament. So I adapted the peg and created a way of attaching the peg to the side of the enclosure. You will also need: 1xM3 Nut 1x M3x8mm…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Case to make Hak5 WiFi Coconut larger
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
Coaster for a mug or beer, dougnut be worry be happy, two-color. Designed for donut fans. The model can be easily prepared in a slicer for two-color printing or replacing the filament during printing. My print was printed in a layer of…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
I needed two wingnuts for my snowblower. I created them, then printed with a pause to insert the nut (the thread is 5/16 x 24 (If I remember correctly). I inserted a pause just above the top of the nut. This pause is used to insert a nut,…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Lock nut M42x075 The thread should be printed with a layer height of 0.12 mm or less for good rolling. Material: PETG Can be printed without support material. With a quality filament (Prusament PETG) and good printer maintenance, you…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
I purchased a set of Jordan Side Chairs from Wayfair. Unfortunately, some of the bushings that are used between the seat and legs were broken. Also, I was short-shipped hex-nut covers. Rather than deal with customer service I made some…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
A tool to clean the chips out of the t-nut grooves in a drill press table.
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
My version of a gyro spinner. Use all supports when printing too. 2, 608-spinner bearings 1, 4x50mm bolt 1, 4x70mm bolt 2, 4mm locking nut 3, 3/4" Stainless Steele Nuts from Ace Hardware
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
![Hyundai Kona Wheel Locks or Nuts Storage Box [REMIX]](https://media.printables.com/media/prints/890297/images/6818167_b95ff9f1-ff3f-40d3-8ce2-ee5109c5818a_aec615e0-3ea9-408b-bd29-080ceb598f09/hyundaiwheellockbox-jc-comp.jpg)
