Search results: oa

Sort order

53,500 models

P
PrintablesClockspring

The Torture Toaster

It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…

Downloads
98,200
Likes
11,183
Rating
4.81
P
Printablesrorys3D

Sunflower fabric coaster

Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…

Downloads
40,796
Likes
10,500
Rating
4.94
P
PrintablesTrilobyte3D

Leaf Drink Coasters with Decorative Plant Holder

A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…

Downloads
19,624
Likes
8,638
Rating
4.88
P
PrintablesSD-3D

Bag Coat Hanger (Heavy Duty Version)

I designed this upgraded Bag Coat Hanger (Heavy Duty Version) as an upgrade to my original design. Like the original model this version has been designed to be an easy support free print as long as you orientate it as shown in the bed…

Downloads
17,119
Likes
5,746
Rating
4.97
P
PrintablesMike

wind-up Bathtub Boat V5 - with benchmark test - Badewannen Boot zum Aufziehen - Funktionsfähig

I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…

Downloads
15,957
Likes
8,060
Rating
4.92
P
Printablesjcjames_13009

Featherboard for table saw

Inspired by featherboards we can find on the market, I designed my own adapted to my need and the bed size of my MINI+ (180mmx180mm) I designed it using Fusion 360. Model includes T-nuts and knobs for M6 and M8 screws to fix it on the…

Downloads
9,845
Likes
2,701
Rating
4.91
P
PrintablesLolcio

Soap dish, Sponge dryer with drainer. INDX gcode included

The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…

Downloads
8,928
Likes
1,476
Rating
4.94

Collapsing Broadsword (Print in Place)

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Downloads
8,072
Likes
1,002
Rating
4.85
P
PrintablesReferentiel

Keyboard storage structure

! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…

Downloads
7,256
Likes
4,310
Rating
4.91
P
PrintablesZach

Modern Soap Dish with Removable Collection Tray

I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…

Downloads
6,469
Likes
1,531
Rating
4.89
P
Printablestrashcandrummer

TrashiStand (Mechanical Keyboard Stand)

Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…

Downloads
6,454
Likes
755
Rating
4.97
P
Printablesmcfada

Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid

This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…

Downloads
5,634
Likes
200
Rating
4.92
P
PrintablesArchipel

Pegboard levitating toolbox

Print your own efficient common tools' toolbox for your pegboard wall. Turn your supports off in your slicer, you will not need support for any of the files includes here. Defy gravity with the "levitating" placement of those designs on…

Downloads
5,207
Likes
1,267
Rating
4.76
P
PrintablesForker45

Pegboard Hooks (US)

Background I tried out several hook designs available for US pegboard, but none fit my pegboard just right or had sufficient strength/geometry for my needs. I spent enough time printing & testing incompatible designs that I finally gave…

Downloads
4,507
Likes
372
Rating
4.93
P
PrintablesFrancis

SUP Drink Holder, Paddle Board

UPDATE: 7/22/2025 YETI Colster/Koozie model added in the files section for standard diameter cans. If you use PCTG filament only 2 perimeters and 15% infill are necessary, no box modifier. Enjoy! UPDATE: 7/19/2024 Skinny can model added…

Downloads
4,459
Likes
364
Rating
5
P
Printablesst3amboat

Print in Place Finger Skateboard With Moveable Wheels (Tech Deck)

Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…

Downloads
4,170
Likes
383
Rating
4.67
P
PrintablesPrint Keep

PK Squire - DIY Foam Dart Blaster

⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ Print Keep Squire is a beginner-friendly, front-loaded single-shot foam-dart blaster, designed for those eager to venture into the exciting world of 3D-printed blasters! Its my first…

Downloads
4,010
Likes
1,744
Rating
4.95
P
PrintablesCatdad Workshop

Ikea Skadis pegboard cups (vase mode)

The Ikea Skadis pegboard is cool, and cheap, and quite functional, but at the same time, its accessories are quite expensive. When I moved into my new apartment, I got three of them in order to store a bunch of stuff on the wall of my new…

Downloads
3,760
Likes
926
Rating
4.67
P
Printablesvzhny

Root Board Game 3D Buildings and Tokens (Every Expansion Including Marauder + Hirelings, Multicolor)

Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…

Downloads
3,534
Likes
467
Rating
5
P
PrintablesSheepMe!

Voronoi Drinking Glas Coaster

Model Drinking glas coasters with holder in Voronoi Pattern. The holder can hold up to 15 coasters. Dimensions The coaster has a diameter of 99 mm and a height of 5 mm. The storage container has a diameter of 110 mm and a height of 80 mm.…

Downloads
3,233
Likes
885
Rating
4.89
P
PrintablesMaxGyver

Boat Propeller 20cm, 13cm and 10cm diameter, 10mm shaft

Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…

Downloads
3,128
Likes
159
Rating
4.83
P
Printablesfifindr

Mini Moai Buddy

Meet Mini Moai Buddy – a tiny yet legendary friend inspired by the famous Easter Island statues! 🗿✨ ✅ Ancient Look, Mini Size – A playful take on the iconic Moai statues ✅ Perfect for Desk Decor & Collectors – A fun addition to any space…

Downloads
3,022
Likes
479
Rating
4.86
P
PrintablesAMTprojects

Fillet diameter radius gauge | Workshop coaster

What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…

Downloads
2,907
Likes
1,117
Rating
4.85
P
PrintablesFC2M3D

FINAL 300 Car Dashboard Symbols Keychains - MASTER COLLECTION

I'm making a master collection of all symbols of the car dashboard. I will upload now 50, and I will update overtime. I hope you like it. 1st pack (50): 10/07/2024 2nd pack (50): 12/07/2024 3rd pack (50): 16/07/2024 4th pack (50):…

Downloads
2,669
Likes
700
Rating
5
P
PrintablesLapjoint

"Red Oak" Boomerang

This boomerang design has become an instant favorite. I modeled it after a wooden boomerang that I made a while ago, which happens to be made from quarter sawn oak and it is dyed red, hence the name. It takes a good hard throw, and then…

Downloads
2,622
Likes
234
Rating
4.87
P
PrintablesNexl

Skateboard Wall Mount Hanger

Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…

Downloads
2,502
Likes
379
Rating
4.94
P
PrintablesINeedOneDesigns

Travel Soap Dish, Neat and Compact when traveling and Using (Single colour version also included)

This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…

Downloads
2,476
Likes
597
Rating
4.83
P
Printablessquinn

Flexi Starfish Coaster

This flexible starfish is an easy print that has been carefully designed to not make use of any bridging to provide for the articulated joints, and requires no supports or other special print options. Its size allows it to serve well as a…

Downloads
2,261
Likes
514
Rating
4.83
P

Parametric Styrofoam EPS XPS Foam Screw Anchor

This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…

Downloads
2,167
Likes
863
Rating
4.96
P
Printablesdevdrik

Fast printing foldable box in cardboard style, fully parameterized

This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…

Downloads
2,120
Likes
336
Rating
4.81
P
PrintablesCulinaryDiver

PET Bottle Foamer for Garden Hose and Modular nozzles - VENTURI INJECTION

This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…

Downloads
2,087
Likes
1,409
Rating
4.6
P
PrintablesSaddamCZ

Customizable board game (Carcassonne) tile grids

My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…

Downloads
1,990
Likes
283
Rating
4.97
P
PrintablesFreezingPixels

Freezing Pixels - Infill Drink Coasters - Set of 12

A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…

Downloads
1,972
Likes
555
Rating
4.9
P
PrintablesCabbitCastle

Ikea Skadis Pegboard Wargaming Paint Bottle Holder

Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…

Downloads
1,963
Likes
573
Rating
4.5
P
Printablesfifindr

Articulated Moai

Meet the Articulated Moai , a fresh twist on the legendary Easter Island statue! 🗿✨ ✅ Inspired by the Ancient Moai – But now with some extra flexibility! ✅ Poseable Legs, Fixed Arms – Sit him on a shelf, desk, or anywhere you like ✅…

Downloads
1,956
Likes
284
Rating
5
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Downloads
1,699
Likes
329
Rating
4.33
P
PrintablesPatrik

Multiboard bottle holders with open bottom in various sizes

Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…

Downloads
1,645
Likes
337
Rating
5
P
PrintablesGut Shot Games

Photo Caddy Board Game Insert Collection

Photo Caddy Board Game Insert Collection **All previous Photo Caddy Board Game Inserts combined into one collection** Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and others), this series of…

Downloads
1,583
Likes
406
Rating
5
P
PrintablesDIY Machines

Build a COLOUR E-INK DASHBOARD - Weather | Calendar | Photos | News...

Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…

Downloads
1,569
Likes
2,337
Rating
5
P
PrintablesDeligent

Life- or level counter for boardgames

This is a counter for board games. It has a geneva wheel so that the tens only increase/decrease for every full revolution of the ones. No painting is required as the number wheels are printed with a color change. It comes with a blank…

Downloads
1,566
Likes
541
Rating
4.56
P
PrintablesElanaut

Moana Glowing Heart of Te Fiti

I designed this Heart of Te Fiti for a kids theater production of Moana. It uses a LED string light with an on/off switch that I had around the house, but can also be purchased online. There's also a necklace holder the heart snaps into…

Downloads
1,541
Likes
314
Rating
4.83
P
PrintablesKehet

Dice tower with self loading mechanism

UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…

Downloads
1,524
Likes
869
Rating
4.61
P
PrintablesExtra Fox

Keyboard & Mouse Wrist Rests

I designed this set of wrist rests for your Keyboard and Mouse. The keyboard wrist rest is designed as a split pair. I tend to swap out my keyboards between several different styles (standard, split, Alice, etc.) so having a wrist rest…

Downloads
1,523
Likes
202
Rating
4.81
P
Printableszuzumuzu

Magic Dice - Marked Dice - Loaded Dice - Gezinkter Würfel

This is how it works: Numerous modifications have been made to achieve a higher chance of a rolled Six. First, the side opposite the Six (One) is fully filled and therefore heavier than the other side. Second, the edges on the One side…

Downloads
1,501
Likes
102
Rating
4.43
P
Printablesdevdrik

Honeycomb Ikea Skadis pegboard plier/scissor/anything holder, hex all the way and no supports

This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…

Downloads
1,474
Likes
329
Rating
4.79
P
PrintablesMrAugust26

Bauzaun / Hoarding / Fence in Scale 1:14

Just made a easy to print Hoarding / Fence for your construction site :) It's in scale 1:14, so it fits perfect to the Tamiya RC Trucks ( or Less , Scaleart and so on ). Flat on the back, so very easy to print. Splitter in 2 parts, so you…

Downloads
1,448
Likes
151
Rating
4.67
P
Printablesbrian.p7

The Witcher Old World - Board Game Card Holders

Draw and discard holders for Witcher The Old world for city/wilderness exploration and event cards (made to fit on space within game mat), with another for potions and bombs. Shown with expansion/Kickstarter cards added. 7/7 - updated…

Downloads
1,426
Likes
127
Rating
5
P
Printablesmcfada

Ryobi Laser Cube Alignment and Leveling Stand for Garmin Approach R10 Golf Launch Monitor

This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…

Downloads
1,415
Likes
66
Rating
4.86
P
PrintablesGalindof

Keyboard Wall Mount Hooks (Command Strip)

Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…

Downloads
1,377
Likes
163
Rating
5
P
Printablesnerdyviews

Spider-Man Coaster and Keychain

Spider-Man: No Way Home just came out so here's a Spider-Man coaster & keychain set for you to print! The coaster also makes a good action figure stand, and I am currently using the keychain as a Christmas ornament. :) Designed to be…

Downloads
1,363
Likes
260
Rating
5
P
Printablest0b1

Pegboard hooks for IKEA SKÅDIS

Simple hooks for the SKÅDIS pegboard from IKEA. OpenSCAD files are included for your adjustments.

Downloads
1,338
Likes
221
Rating
4.86
P
Printableswootje13

FC Bayern Munich/München coaster

One colorchange will do. You can print the model upside down to give the top surface a nice finish or you could try to use the ironing feature. Preferably in PETG to prevent a hot drink from deforming the coaster. DO NOT SELL THESE - FC…

Downloads
1,324
Likes
63
Rating
4.56
P
PrintablesPatrick Blom

Clothes Folding Board / Shirt Folding Board

Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…

Downloads
1,299
Likes
179
Rating
5
P
PrintablesCisco3D

Skateboard Toy

Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.

Downloads
1,250
Likes
134
Rating
4.67
P
PrintablesFonz

Mechanical Keyboard Switch Lube Station

Always wanted a nice custom lube station to go with your premium mechanical keyboard? No money for the next GMK group buy? Why not brighten up your lubing chores with a lube rectangle you can really call your own. Or just showcase your…

Downloads
1,200
Likes
248
Rating
5
P
PrintablesPjtrQ

Keyboard feet (Logitech K270)

Keyboard feet for logitech k270 Printed in PLA

Downloads
1,187
Likes
59
Rating
4.93
P

Stable floating Benchy with Cargo, Smoke and Flag (Multicolor Version)

Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…

Downloads
1,179
Likes
224
Rating
5
P
PrintablesMartin Majewski

Prusa i3 MK2(s) & MK3 Spool Holder - Frame Mount - Top Loader

Update 2022/04/19 I've created a version of the Mark 3 arms for 2020 VSlot aluminum extrusions. Check out the remix section! Update 2019/10/18 I've imported this project from my Thingiverse account. To make things clearer, only the Mark 3…

Downloads
1,159
Likes
178
Rating
4.94

Pegboard hook

This hook is made for pegboard with CC 12mm and has a diameter of 3,9mm. for example Biltema's pegboard. This hook is perfect for hanging spanners, for example And this one is designed not to use screws

Downloads
1,143
Likes
128
Rating
4.57
P
Printablesslayernine

Pegboard Wall Mount Spacer with fitted through-washer

Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…

Downloads
1,108
Likes
148
Rating
4.83
P
PrintablesValhalalala

Gloomhaven Character Board (Remix)

Update May5 2022 Added the XP and HP pin (heart) stl files from DocKuro 's post just in case people cant find them. Also fixed errors in the Character Board stl and the gcode files. I use Duramic PLA+ Filaments and they print very well…

Downloads
1,100
Likes
161
Rating
5
P
PrintablesZenlayne

Tiny soap glider

Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…

Downloads
1,097
Likes
337
Rating
4.55
P
PrintablesGrant

Logitech keyboard replacement foot / leg

The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.

Downloads
1,053
Likes
469
Rating
4.86
P
PrintablesPhilippHee

Magnetic Whiteboard Pen Holder

Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…

Downloads
1,021
Likes
148
Rating
4.89
P
PrintablesHydra Designs
18+

The source marked this model as adult content.

Downloads
1,001
Likes
500
Rating
4
P
PrintablesChri81

Bosch GTS 10 XC Vertical Featherboard

Vertical Featherboard for the fence of the Bosch GTS10XC. You'll need per set 1x Featherboard 1x Top Bracket 2x Slot Nut 4x Knob (Update 19.12.2022: Knobs designed a bit smaller to ensure better handling) 4xM6 Hex bolts 2x M6x20 for the…

Downloads
960
Likes
170
Rating
5
P
PrintablesPeter Pain

Oathsworn: Into the Deepwood - Playerboard V2

This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…

Downloads
896
Likes
55
Rating
4.83
P
Printablesbartosslajos

Boat propeller

This is a simple, 3d printing friendly propeller. I had a broken boat propeller and I replace it with this part. In the .3mf file there are one of them according the .stl, the other one is a mirrored (in Prusa Slicer) geometry. Check the…

Downloads
877
Likes
36
Rating
0
P
PrintablesThomas Fischer

Vekoma Classic Roller Coaster Car

Thanx to Tim ( https://www.myminifactory.com/object/3d-print-classic-roller-coaster-train-142420 ) and Don1975 ( https://www.thingiverse.com/thing:39229 ) for their good work. I changed nearly every part a little bit, so I post this here…

Downloads
832
Likes
149
Rating
4.67
P

Hextraction Board for Small Build Plates (148x153)

Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…

Downloads
831
Likes
68
Rating
5
P
PrintablesSBtheWizard

Top loader stand for TCG cards (Pokemon, Magic, etc)

My goal was to create a small minimalistic top loader stand to view my cards, guess it could be used without a top loader, but it's always a good idea to store them protected, and they would also sit kind of loose without one. I have…

Downloads
819
Likes
115
Rating
5
P
PrintablesSlicedbread

Keyboard Switch Fidget D20

Demo video https://youtube.com/shorts/_D_-_w1XRVI I printed everything with a .2 layer height on a Prusa Mk3s, and have included the prusaslicer projects I used. I used support on build plate for the core although it may be largely…

Downloads
816
Likes
357
Rating
4.8
P
PrintablesPatrick

Garmin Vivoactive 4 Charging Stand

This is a charging stand for the Garmin Vivoactive 4. Simply insert the original cable from the bottem and secure it in the slot. The part prints without supports. With the 0.3mm Draft profile on an MK3 it will take less than an hour.…

Downloads
802
Likes
110
Rating
4.83
P
PrintablesMetikumi

Coaster with Beautiful and Functional Pattern

I designed this coaster to use in the kitchen, under the dish-soap bottle. The pattern not only looks nice, but it also prevents the bottle will stick to the coaster. The object is optimized for 3D printing and works with a wide range of…

Downloads
798
Likes
127
Rating
5
P
PrintablesExtra Fox

Half-size Breadboard Case

Take your half-size bread board, and jam it into this here thing, and BOOM, it looks all spiffy. That's all this really does. It does feel nice to hold and you could argue the breadboard itself is now more stable, but mostly I was just…

Downloads
789
Likes
51
Rating
5
P
PrintablesRemoteFox

Magazine loader rfox.eu v2.0

Small magazine loader, which will save you some pain from loading. Use your thumb to press it down and up like this: I recommend printing this with a glue stick applied to your printing area. Gcode has a 2cm of skirt added because I…

Downloads
789
Likes
90
Rating
4.8
P
PrintablesFuméeBleue

Stranger Things coaster

Stranger Things coaster Diameter : 100 mm 4 layers / 3 colors : First layer (up to 2.5 mm) : black Second layer (up to 3.2 mm) : red Third layer (up to 5.2 mm) : white Last layer : black Dessous de verre/décoration Stranger Things…

Downloads
770
Likes
159
Rating
4.38
P
PrintablesGilly Barr

"radioactive" bookmark

A bookmark I designed to match the book I'm currently reading - "Every tool's a hammer" by Adam Savage. I printed this with Mango Yellow Prusament PETG, which really matches the color of the book sleeve nicely :) If you print this with…

Downloads
763
Likes
152
Rating
5
P
Printablesmodsmthng

Floating book shelf / invisible bookshelf / magic bookshelf / floating books shelfs

In the pictures I only used one shelf (base) for each book stack. Correct print orientation is crucial for stability, more below. My Girlfriend needs a new bookshelf every month and she wanted to try an invisible one, so I over-engineered…

Downloads
746
Likes
328
Rating
5
P
PrintablesFrankincell

Battlestar Galactica Coaster

Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…

Downloads
743
Likes
113
Rating
5
P
PrintablesLudo B

Bootschroef met 5 bladen, boat screw with 5 blades, Hélice de barco, hélice de bateau

Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 5 bladen. Voor iedereen kan kan ik meerde of minder schroef bladen maken. Due to the success of my boat propeller with three blades, I also made one with…

Downloads
740
Likes
48
Rating
5
P
PrintablesNycat

Pokéball Flexible Coasters – Gotta Print ’Em All! -No MMU

Description Show off your Pokémon fandom with these Pokéball-inspired coasters! Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee…

Downloads
737
Likes
415
Rating
4.67
P
Printableslazor226

Pac-Man & Ms.Pac-Man Inspired Coaster Set (No AMS or MMU required)

The Pac-Man & Ms.Pac-Man Custom Coaster Set! Featuring the iconic Pac-Man maze and the four varying Ms.Pac-Man mazes! You can always get creative and use different colors to make the alternate colored mazes. ie. Pac-Man Plus, The…

Downloads
735
Likes
350
Rating
4.8
P
Printablesrazandersen

star wars coasters

star wars coasters including rebel, empire, falcon and fett

Downloads
711
Likes
119
Rating
5
P
Printablesnilok

Raspberry Pi Breadboard Case

The larger holds a Raspberry Pi 2/3/4 and a half-width breadboard. The smaller is made for a Raspberry Pi Zero. Nothing too complicated - just handy prototyping cases in solid and slotted bottoms. Both accept 4x M2.5x4 (or M2.5x5)…

Downloads
700
Likes
115
Rating
4.88
P
PrintablesAmos491

Pegboard Reaching Hand

I realized that I could put pegboard hooks onto anything. Suggest printing the pegs with an 80% infill for strength. Rest of print can be lower 10-20% Remixed from: https://www.thingiverse.com/thing:4382905 If you like what I am doing,…

Downloads
670
Likes
146
Rating
5
P
Printables3D KIMBA

Tic Tac Toe: The Board Game

Tic Tac Toe: The Board Game Game Description: Welcome to the world of Tic Tac Toe , the board game that combines the simplicity of a timeless classic with elegant and captivating design. Perfect for all ages, Tic Tac Toe offers a fun and…

Downloads
655
Likes
57
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF005-radioactivity-signs-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Downloads
651
Likes
174
Rating
5
P
PrintablesGumbert

Skateboard Wall Mount

Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim

Downloads
647
Likes
173
Rating
5
P
PrintablesMikyner

Skoda Fabia 1 (1999 - 2007) phone holder on dashboard

Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…

Downloads
634
Likes
58
Rating
4.33
P
PrintablesBennacerismo

Apple Magic Keyboard 2-in-1: Raiser and vertical stand

all available raisers had angles that were too wide for my liking. So I made one, it connects to the keyboard via slide rails, you can also flip it over to keep the keyboard upright when not in use. Tilt the pieces towards the inside, as…

Downloads
634
Likes
61
Rating
4.8
P
PrintablesIsaac Corbrey

Complete 9x9 Go Set with Board, Bowls, and Stones

Ever heard of Go? It's simple to learn, fun to play, and has pretty much no skill ceiling. Print yourself a set and have some fun! No supports are required for any parts, and the board will fit on an Ender 3 Pro's print bed (but just…

Downloads
624
Likes
149
Rating
4.8
P
Printablesstah

Reloading Funnel 9x19 & .223

Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…

Downloads
618
Likes
56
Rating
5
P
PrintablesLupi
Downloads
603
Likes
103
Rating
4.33
P
PrintablesKadows

Quetzalcoatl, Aztec deity

This is a beautiful figurine depicting the Aztec deity Quetzalcoatl, originally posted by Världskulturmuseerna on Sketchfab. I have cleaned it up slightly for 3D printing. Prints great with organic support! Info from Wikipedia:…

Downloads
573
Likes
82
Rating
4.67
P
Printablesfhessel

Gridfinity Generic DevBoard Holder

This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…

Downloads
568
Likes
122
Rating
4.88
P
PrintablesJohannes

BMW C1 Overload Protection (4652852493)

Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…

Downloads
566
Likes
12
Rating
0
P
Printablesnerdyviews

Spider-Man Iron Spider Coaster

Here's another Spider-Man coaster, this time based on his Iron Spider outfit from Avengers: Infinity War & Endgame. Also makes a good action figure stand. Happy printing!

Downloads
565
Likes
126
Rating
5
P
Printablesdanielzaleski

Skateboard Riser Pad 1/8 inch

These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…

Downloads
537
Likes
53
Rating
3.67
P
PrintablesSean B.

Folding Cribbage Board

This is a folding cribbage board that prints with no supports. The inner compartment is large enough to house a standard deck of cards and pegs underneath. I wanted to design a board that was compact and travelled easily. The magnets help…

Downloads
537
Likes
46
Rating
5