Search results: oru

Trnová koruna (Crown of Thorns)

INRI - Crown of Thorns

Korunka z ledového království

Tisk korunky inspirované ledovým královstvím. Provedl jsem úpravu a umožnil vložení imitace krystalu, realizování broušeným plexisklem a následné doplnění o modrou leddiodu s slotem na baterii.

CZK Coin holder (Mincovník na české koruny)

Replacement for original EUR coin holder for the Kreator KRT691301 cash box - https://penzo-naradi.cz/kreator-krt691301-prirucni-pokladna-eur Dimensions: 273 × 109 × 20 mm Divided into two parts (p1, p2) so it can be printed on Prusa. Two…

Padoru

I tried to make this project just for fun, ik it's not perfect but I did the best I could, I hope y'all enjoy it anyways! This is a remix of: Padoru by NordicBerry - Thingiverse Merry Christmas! Also considere donations if you like the…

Padesáti koruna-50Kč

Tohle je žetonek podle padesáti koruny MÁ STEJNOU VELIKOST a můžete ho používat jakkoliv klidně i v automatu když to půjde :D Doporučuji tisknout z PLA nebo PET-G prosím stáhněte si to a olajkujte budu moc rád :3 happy printing

Chadící větrák motoru, Cooling Fan for motor

For motor shaft diameter 17mm. Used ABS for better temperature resistance. Pasuje na hřídel motoru o průměru 17 mm. Použil jsem ABS pro lepší tepelnou odolnost. Improvement - optimalized size of the shaft hole, modification of the fixing…

Darts Mission Torus 100 light support for GranBoard Pole support

This is a simple support made to assemble those items easily: Mission Torus 100 (https://www.missiondarts.com/dartboards-c84/dartboard-lighting-c109/mission-torus-100-folding-portable-travel-light-p1668) Gran Pole support…

5 a 10 korun do košiku (vyndavací)

Super kličenka!

SEVA - výplň s otvorem a bez otvoru

Výplň pro stavebnici SEVA s otvorem a bez otvoru. Infill for SEVA construction kit with and without hole.

Kurama Mask : Nine-tales mask : Naruto To Boruto

Kurama Mask : Nine-tales mask : Naruto To Boruto Designed to be easily Painted. Large offsets.

Zajišťovací kolík krytu vzduchového filtru motoru Briggs & Stratton

Kolík drží kryt vzduchového filtru na motorech Briggs & Stratton, pouze ve verzi 1válec, na kryt jsou 2ks, tisk v PETG, podpory nutné. Originál stojí nesmysl a musí se koupit s krytem, nelze koupit samotný kolík. Na traktůrku ho mám déle…

Connect 42390556 Mixer Coupler - Spojka motoru a čepele tyčového mixéru

Printed successfully on MINI+ from recycled PETG with 100% infill. Works magics.

Gojo Satoru purge line

Gojo Satoru als purge line, sie müssen den gcode in ihren slicer kopieren M83 ; use relative distances for extrusion ; filament start gcode M106 S0 ;Z:0.2 ;BEFORE_LAYER_CHANGE G92 E0 ;0.2 G1 E-10 F3600 ;AFTER_LAYER_CHANGE ;0.2…

Dvojitý komín WPL B24 na držák ventilátoru

Rozdvojen komín odsávání. Funguje

Držák reproduktoru Logitech

doporučuji tisknout s petg nebo pla se zapnutým okrajem a 90-100%infillem.

Waterproof forumslader housing v2

This is a waterproof housing for the forumslader (ahead version) , a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an…

Savic Rody Cavia - watering hole stuffing / ucpávka napájecího otvoru

Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…

LED Blocker Koorui 3,8 mm x 2,5 mm

I designed this to block the white led that indicates sleep on the Koorui Monitors. I find this uncomftorble to sleep. These just slot over the existing light. Print in very fine resolution (0,1). The model is very fast, so you are done…

zátka otvoru 26

Zátka pro otvor s průměrem 26 mm

Gehäuse für/ Housing for Forumslader V5 kompakt

For English see below Es handelt sich um ein Gehäuse für den Forumslader V5 kompakt: https://www.forumslader.de/aeltere-versionen/automatiklader-v5/ Der Forumslader ist ein effektives Ladegerät zum Laden von Mobiltelefonen/ Tablets für…

Tray for KORUM Bait tub

Simple inner tray for KORUM Bait Tub 1,2l

Indikátor otáčení motoru extruderu / Extruder motor rotation indicator

Vzor: https://blog.prusa3d.com/cs/indikator-otaceni-motoru-extruderu_7392/ Možné použít magnety 8x3 nebo 8x2 mm

Roly-Poly Penny & Koruna Egg

**Koruna version added for my friends in The Czech Republic use 8 Korunas. Both versions are designed with tight tolerances insuring the weight is perfectly balanced and concentric to the center The Roly-Poly Penny Egg is a fun,…

Korum speed fit tripod adaptor - replacing part for bankstick

Replacing pat for Korum Speed fit tripod adaptor Speedfit Tripod Adaptor . Printed from PETG and reused original screw from broken parts.

The Horus Heresy - Status Markers

These tokens are single sided status markers (Pinned, Stunned, Surpressed, Routed) for The Horus Heresy. The goal was to make a marker that was easily printable with contrasting colors for each status without having to use a multi-color…

Korum Quick release adaptor

Alternative Quick release adaptor for Korum system

Tactile image: asexual reproduction (sporulation)

Tactile image of asexual reproduction by sporulation using a fungus for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…

Příprava a převod projektové dokumentace zpracované v SW ARCHICAD do souboru pro 3D tisk.

Vytvoření 3D modelu z projektové dokumentace RD zpracované v SW Archicad. Výstupem je návod na převedení projektové dokumentace .pln do souboru .stl a následný export do souboru G-code pro 3D tisk.

Korunky a medaile

Dětem z mateřských škol ukázat možnosti 3D tisku. Korunka určená k narozeninovému dni (u nás může být každý králem nebo princeznou) a pamětní medaile, které si pomalují a odnesou domů.

DJ DORU label plate

Label disc for a DJ table

Otvírák korunkových uzávěrů

Žáci vytvoří 3D model otvíráku a následně vytisknou na 3D tiskárně.

Valorant Yoru mask

The agent Yoru (from the game valorant) ultimate mask. This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. https://www.riotgames.com/en/legal

Minisforum DEG1 eGPU Dock Enclosure / Case / Shell

I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…

Gojo Satoru - Jujutsu Kaisen

This 3D printable model of Gojo Satoru from Jujutsu Kaisen and requires ZERO supports. ENJOY!

Catoru Gojo

https://www.thingiverse.com/thing:5801017

Torus Toy

Printing I needed to enable 10mm brim to avoid print bed separation for the round version. If you have decent adhesion you can print the hexagonal version without brim. Post Print You need to move the rotational joints for a while to get…

Královská fantasy koruna | Royal Fantasy Crown

Ikonická královská koruna, která byla navržena tak, aby dominovala každé sbírce nebo kostýmu. Bohatá ornamentika: Spodní obruč koruny je zdobena složitými reliéfními vzory a jemným perlovým lemováním, které podtrhuje její luxusní…

Satoru Gojo - JJK - Chibi Style

Enjoy my work? Find my full collection over on Patreon or By Buying Me a Coffee This is my cute chibi style sculpt of Satoru Gojo from Jujutsu Kaisen. I'm still trying to figure out if I want to go and watch the new movie... This model…

Minisforum MS-01 2U rack mount 10" & 19" (with fan & keystone)

Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case…

yoru mask valorant

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Modern Torus LED Tealight

Introducing the Modern Torus Tealight, a stunning fusion of form and function. Crafted in the iconic torus shape (I live up to my user name), this tealight exudes contemporary elegance. Intriguing extruded lines adorn its surface, adding…

Mk3s Blower Shorud

I've been working on an improved blower shroud based on another design on Pursa Printers. This is just a work in progress, but works fairly well. Join the discussion here:…

Twisted Torus (soluble supports torture test)

A small torture test for printing with soluble supports. The inside of the torus is hollow, but the holes on the surface are quite small. This geometry was created to see how well PVA dissolves in hard to reach cavities. The print in the…

JJK Satoru Gojo Chibi keychain

JJK Satoru Gojo Chibi keychain 2 color print.

Mihawk's Yoru from One Piece

12-03-25 Update: I had a request to make a version of the sword with a hole included in the blade to slot a ½" (1.27cm) wooden dowel inside for strength at conventions so those should be in the files section. Mihawk's legendary sword Yoru…

Gojō Satoru anime funko POP!

Print & acrylic draw!

Minisforum MS-01 & MS-A2 1U Rack Mount Kit

I have added an update to this. Please test out the new additions and let me know your results in the comments! Watch the video here where I explain the whole process. Most of the parts can be printed with PLA at 15% in-fil. All the screw…

Prison Realm Satoru Gojo - Jujutsu Kaisen Figures

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)

Rack Mount For Minisforum MS-01

Rack Mount for Minisforum MS-01. There are version 1 and version 2. Print using PETG, PETG (CF), ABS or ABS (CF) is highly recommended. Version 1 will be a bit tight at the ear (top & bottom) side and take up 1 and ⅓ U of rack height.…

Weird Torus Earrings

Designed in Fusion 360 and Tinkercad. Print Settings Printer Brand: Printrbot Printer: Play Rafts: Yes Supports: No Category: Earrings

Minisforum MS A2 / MS 01 case

Minisforum MS-A2 and MS-01 one piece case, designed for extra cooling. Original case used for modeling with Fusion360, with some measurement tweaked for better fit and to allow some tolerances when 3D printed. STEP file of the raw case…

Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U

Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U This should also work for the MS-A1, thought the dimensions are slightly small in width and depth, but the height is the same, so it should hold them snug, you'll just have a few mm gap to…

Satoru Gojo Anime Bust | Jujutsu Kaisen| Fan Art

Bring the strongest sorcerer to your desk! This Satoru Gojo bust captures the iconic Infinite' pose with high-fidelity detail in the hair and hand gestures. Optimized for clean printing and a perfect canvas for hand-painting hobbyists. 💙…

Minisforum MS-01 Vertical Stand

I'm not sure that this fits the MS-A1. It looks like the same chassis but I'm not certain. Tolerances are tight for a snug fit PRINT SETTINGS I'VE USED: Nozzle: 0.4mm Layer Height: 0.2mm (Feel free to experiment and change what you like )…

Držak konektoru XT60.

Držák konektoru XT60, montáž do panelu. Konektor je vlepen. Pro lepší tisk doporučuji podpěry ale půjde to i bez nich.

Satoru GOJO from the jujutsu kaisen anime

Satoru GOJO from the jujutsu kaisen anime

Jujutsu Kaisen Gojo Satoru Multicolor

Materials: PLA, ABS, PETG Layer Height: 0.12–0.20 mm for FDM Nozzle Size: 0.4 mm (standard) Supports: Yes (tree supports recommended)

Stargate Horus Helmet

Another great file uploaded for free from the https://www.onekura.com/ . All credit goes to the original designer, Cheers Jace Print instructions Category: 3D Printer Parts

Yoru Valorant Abilities Keycaps

I make these per request, so DM me, or email me at [email protected], and I will try to get back to you as soon as possible. If you're using Cura, I made a short tutorial video here for how to print it: I'm making valorant keycaps for…

Satoru Gojo Chibi Jujutsu Kaisen

Chibi

Yoruichi : Bleach

3D model náhradní vrtulky k elektromotoru do stavebnice Boffin 100 - 750

Pokud se vám stalo, že se vám v průběhu hraní si se stavebnicí Boffin 100, 300, 500 nebo 750 poškodila vrtulka nebo „kříž“, na který se vrtulka nasazuje, tak si můžete stáhnout přiložený model vrtulky, „kříže“ a můžete si je vytisknout…

Kill Team Manufactorum

This is a remix of BiancaW's awesome Manufactorum, I just added some details and split the levels of the building. Category: Games

The Horus Skull

Sculpted this based on a JackOfTheDust skull I have seen on Instagram. Supports needed.

Czech coin nominal 1 2 5 10 20 50 CZK - české mince koruny žetony

Simple round Czech coins 1 CZK, 2 CZK, 5 CZK, 10 CZK, 20 CZK, 50 CZK with printed number. Diameter and height correspond to real coins. Suitable for vending machines with a spinning mechanism, board games, children's money, etc. Make a…

Satoru Gojo cookie cutter

Simple Christmas cutter in the shape of a Satoru Gojo from the anime jujutsu kaisen. You can support me with Bitcoin or Lightning network HERE or normal payment HERE .

Sekera Dřevorubecká 1:12 a 1:10, RC car, miniatura, diorama

Dobrý den, Mám pro vás sekeru pro RC auto, jeep, expedici nebo treba diorama. Sekera ma zvlast kovovou cast, pro vetši realističnost. Sekera je tvořeny ze dvou kusu. Tisknuto bez popor Pokud vás moje práce zaujala, odkazy jsou zde:…

BVB Borussia Dortmund Drink Coaster / Beermat

I created some nice drink coasters for all BVB fans in the world. Just print them and put your beer on it while watching the game. 2-color-print has been done with the ColorChange-tool from Prusa. (…

Gojo Satoru Manga Panel - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Horus Sculpture

This is a 3D scan of a Horus sculpture, I used plane cut for a flat base, sculpted it a bit and oriented it upright. It's from the Harvard Museum of the Ancient Near East, more info: Egypt Granite SM1931.3.122 Scanned by Andréa Martinez…

Zoroark & Zorua Figurine

A figurine of Zoroark protecting Zorua. Video game models pulled from models-resource.com and posed in Blender. It does require supports. Be careful when removing as the right arm is somewhat fragile.

Minisforum MS-01 - 140mm Fan Cover

This is a replacement bottom plate for the Minisforum MS-01, designed to accommodate a 140mm fan for improved cooling. The plate features precise cutouts and mounting points, ensuring easy installation and optimal airflow. To complete the…

Torus 42 mm - Ring

Torus for handcrafting etc. 42 mm outer diameter, 30 mm inner diameter, 6 mm thick

Bitcoin Czech korunas for shopping carts

Resized Bitcoin model to 5, 10 and 20 CZKs. Ideal for shopping carts. bc1qn50lfaawu9344xw2g85v0pl6nk6av644mw7la8

Jujutsu Kaisen Satoru Gojo Hue Forge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Cobalt Blue At layer #9 (0.8mm) swap to Purple At layer #11 (0.96mm) swap to Gray At layer #12…

Naruto to Boruto - Shinobi Striker

Naruto to Boruto

Lidl/Parkside/Horusdy pegboard holder for calipers

pegboard holder for calipers

Borussia Moenchen Gladbach Logo

Viel Spaß! Category: Signs & Logos

Satoru Gojo bust

Print Settings: Material: PLA Silk Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The…

120mm fan case for Minisforum UM690S

My new PC is a Minisforum UM690S. Despite its small size, it is very powerful. However, the small computer has one drawback: the two case fans are quite loud and run at full speed constantly. Therefore, I opted for a small modification to…

Torus Earplug

Useful for dampening down live music without losing enjoyment, and for people like me with sound sensitivities. A little less dampening than Anybodysguess' design, though both allow you to hear voices well - even better than normal in…

Horus

Horus from the old Egypt Category: Sculptures

Eye of Horus Pendant

It stands for well-being, healing, and protection.

Hřeben na čištění kondenzátoru sušičky (Dryer condenser cleaning comb)

2 strany, jedna delší a užší a druhá robustnější. Doporučuji tisk s PET-G For cleaning and restoring possibly damaged capacitor plates. 2 sides, one longer and narrower and the other more robust. I recommend printing with PET-G

Borussia Dortmund keychain BVB / Borussia Dortmund klíčenka BVB

This is very nice model of BVB keychain. / Toto je velice dobrý model BVB klíčenky.

MINISFORUM MS-A2 / 01 + Intel Arc Pro B50 Replacement Shell

Long story short - I got tired of waiting for a single-slot cooler option for the Intel Arc Pro B50 card to use with my MINISFORUM MS-A2 hosts, so I designed a replacement shell that fits the card in a dual-slot configuration, and added a…

Torus Bowl

I designed this using the torus and circular pattern features in Fusion 360. It needed some tuning to get right but turned out great! Works well at any scale you need and whatever layer height you prefer. Mine was 150% scale at .2mm…

Stargate Horus Armour

Hi AOcolossus let me know if it needs any further modification, I've thickened the shell smoothed it a little and split it up in sections to help with the printing process. Good luck and post some pics where you can, Cheers Jace ; )

Torus Knot Sculpture Desk Toy

A smooth, continuous mathematical torus knot sculpture designed for clean aesthetics and tactile display. Perfect as modern desk art, a display sculpture, or a satisfying geometric fidget piece. Bottom has flat area for better bed…

Torus: Puzzle

Print two copies of the puzzle torus. They are designed to be printed without support.

Ancient Egyptian Horus Bust STL | Falcon God 3D Print | Mythology Desk Art

🔥 LOVED THIS? Get 260+ Premium Designs Starting at $5/Month! Channel the power of the sky god. This detailed bust of Horus features traditional regalia and intricate feather textures. An elegant historical piece that adds ancient wisdom…

yoru valorant

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

19 inch rack bracket for minisforum ms-01 power supply

19 inch rack bracket for minisforum ms-01 power supply this mounts to the side bottom of my rack enclosure No support material needed. Included is the f3d file

Koru barefoot shoes

second shoe in this video Print by uploading the provided unviersal gcodes on your printer's SD card, launch the gcodes from the printer interface MK4, MK3, Core One fit gcodes up to size EU 40. 250x250 buildplate fits all sizes There are…

2U 19 inch rack front panel mount for minisforum ms-01

2U 19 inch rack front panel mount for minisforum ms-01 These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support material needed. Included is the f3d file

Satoru Gojo.Jujutsu Kaisen

Satoru Gojo is a character from the manga and anime series Jujutsu Kaisen, known as "The Strongest Shaman." He is a Special Class sorcerer and the inheritor of one of the most powerful techniques, the power of the six eyes.

Filtr ke kompresoru , Compressor filter

Filtr na přívod vzduchu do kompresoru s výměnným molitanem z houbičky na nádobí. Průměr závitu do kompresoru 20mm se stoupáním 1.75mm Filter for air supply to the compressor with replaceable foam from the dish sponge. Compressor thread…

Adam Torus's White Fang Mask - RWBY

Check out my TikTok Where I upload my build process of 3D Prints: https://www.tiktok.com/@demambaprints Started watching RWBY and loved Adam's mask so I decided to design it. resize the model to fit your face as desired please feel free…

Minisforum MS-A1 Noctua NH-L9a Case

The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. I made a mount to adapt the NH-L9a to the slightly smaller…

Kikoru Shinomiya's Axe

molded this cause why not. Its massive, 6ft long and 3 ft wide. have a split version that's cut up into roughly 9 inch sections for easier printing. will defiantly need gluing, suggest some e600 or jbweld. Category: Props