19,222 models
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Sizes (Diameter x Height): 30 x 25 mm 30 x 35 mm 30 x 50 mm 42 x 35 mm (2 mm and 3 mm thread) 42 x 50 mm (2 mm and 3 mm thread) 42 x 65 mm (2 mm and 3 mm thread) 66 x 50 mm 66 x 65 mm 66 x 80 mm Printing Parameters: Resolution: 0.2 mm…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
This new baseplate allow mounting of several trim routers Tested with 65mm Makita Compatible with : Makita 3709 - 3710 - RT0700 - RT0701 Katsu Erbauer EPR710 Dewalt DCW600B, DWP611 & portercable 450 compact (2.4"x2.4") Ryobi (55x55mm)…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
Overview A fully printable, fully functional printable harmonica in a simple 3-piece form factor that clips together - no fasteners needed! The design features swappable reed plates which set the playable notes. The attached reed plate…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Introducing the ultimate solution for guitar players who struggle to keep track of their guitar picks! 🎸 We've all experienced the frustration of dropping a guitar pick, only for it to seemingly vanish into another dimension, never to be…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…
Print approx. €10.22–€12.50 excl. taxPreliminary estimate for one variant
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Weathered Rusty Nuka Cola Bottle Cap Make it into a keychain or a coaster. Good Candidate for Drybrush Technique.
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…
Print approx. €23.64–€28.90 excl. taxPreliminary estimate for one variant
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
About the Smart Storage basket: The Smart Storage slide-out hanging basket is used for storage of various items. It can be used to storage food in the refrigerator, in the office for storage of office supplies or in the garage for storing…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Print approx. €9.57–€11.70 excl. taxPreliminary estimate for PETGSource material: PET
In the area that I live, various attachments, such as spray heads, for commonly used drinking water bottle can be found in shops. Hence, I was inspired to make a spout attachment for watering plants. I took the easy way in designing this…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
This pouring spout is designed for canisters with DIN threads , commonly found on 10 L and 20 L canisters . An integrated air channel allows air to flow back into the canister while pouring, resulting in a smooth, controlled stream and…
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for one variant
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Router template to create a perfect radius on your corners
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for one variant
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for PETGSource material: PET
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have South Park for you - Kenny, Stan, Kyle and Eric . The characters are authentic, inspired by the South Park series. Suitable for coloring. My kids love these characters :-). Happy printing! I used PLA/PETG as the material.…
Print approx. €13.00–€15.89 excl. taxPreliminary estimate for one variant
[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Divide your boxes to sort different pieces. NEW! obj. file included
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
Nuka Cola Dispensary / Vending Machine. Make it into a piggy bank. Or use it in the dice tower contest. I find this model very satisfying to look at. I think I am a sucker for Nuclear Age style artwork.
Print approx. €19.01–€23.23 excl. taxPreliminary estimate for one variant
Hey there! Here's some cool info about the Scout symbol, the fleur-de-lis. Sir Robert Baden-Powell, the founder of Scouts, chose it as the official symbol. It's all about the Scout code: duty to God, others, and yourself. The fleur-de-lis…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Bring Kenny McCormick from South Park to life with your 3D printer! Besides the one-piece model, I've attached STLs of Kenny cut into two pieces, which can be printed without supports. If you print Kenny in one piece some supports are…
Print approx. €6.20–€7.57 excl. taxPreliminary estimate for one variant
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for PETGSource material: PET
Mouth Guard Print In Place. For those who want a new case with a hinge to hold your mouth guards. I made this in PLA.
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
Lip to sit over the edge of the door. Painters tape should be able to hold it in place while cutting. Only one side has the lip so it can also be used on a door frame.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
I remixed the power outlet dust cover by grumbel , because I want to swap it more often in and out. I use it in the kitchen near the hot plate, where tomato sauce may be splashed or likewise. :) Therefore the cover is a little bit thicker…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
The Goul : Fallout TableTop /Desktop Plaque. Wall Haning Plaque. You can find a version that looks more like the actor Walton Goggins in the link below: The Goul #2: Fallout by Peter Farell | Printables Store
Print approx. €12.89–€15.75 excl. taxPreliminary estimate for one variant
Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Stable stand inspired by MacBook Air M1 shapes, holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your MacBook if you want to save space on your desk. Printed with 4 perimeters (if you want to save…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant
Caution: This is an old design that doesn't work on some printers because it relies on really tight tolerances. The new design can be found over here: https://www.printables.com/model/256778-micro-sd-card-holder-2 Only print this if you…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Print approx. €1.88–€2.29 excl. taxPreliminary estimate for one variant
[ENG] Simple anti-stress ring. It consists of two separate circles that can be rotated in relation to each other. When turning, a distinct clicking sound can be felt and heard thanks to the triple spring mechanism. There are two versions…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This design evolved from the need for a “drawer pull” for using the cup as a drawer, but then I realized there was an opportunity for something even more useful. Hang your cups on the new packout wall system, the lids of any vertically…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Standard outlet cover
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…
Print approx. €6.29–€7.68 excl. taxPreliminary estimate for one variant
Stan from South Park. No fixes needed.
Print approx. €16.74–€20.47 excl. taxPreliminary estimate for one variant
Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…
Print approx. €5.69–€6.95 excl. taxPreliminary estimate for PETGSource material: PET
A simple outside radius gauge for 1-15mm. Eine einfache Außenradiuslehre für 1-15 mm.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
This remix of https://www.printables.com/model/193429-blunted-folding-knife, removes the punch out / card kit elements to make it even easier and quicker to print.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
This is a straight edged version of the Butterfly router template. I included the F3D file so you can scale it to whatever size you need. The inner butterflies of the template are included and are sized .1mm smaller for tolerance. Makes…
Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant
Paint Pouring Flower with 10 spouts. The Flowers dimensions are approximately; 70x30 mm. This Flower features unique holding tabs on top to allow easy lifting from the canvas after its used for pouring paint! I recommend printing with a…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Sizable hide for snake. We have a corn snake that is about to hit 6 feet that comfortably fits inside this hide.
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
Pasapañuelo / scarfring / neckerchief for Scouts or CubScout
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Makita router jig fit on a makita 18V DRT50Z
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €20.23–€24.73 excl. taxPreliminary estimate for PETGSource material: PET
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Percussion Frog 90% infill, WITH SUPPORT, only in the mouth In Prusa Slicer, you can now easily add support manually with the brush. But it's still not that easy. So here are my .3mf-files (for the MK4). Two versions: Original size and…
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for one variant
Hello! This is a simple playground roundabout or spinning wheel for the Playmobil kids, the design is inspired by the one displayed at the picture of the set 4015 . Check my other creations for the playground in this collection . It is…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
This mount only requires 1 screw in the ceiling and consists of multiple parts that can be printed flat to optimize layer orientation. I found other RC plane mounts lacking because either their hole spacing required mounting into drywall…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for PETGSource material: PET
Demon fruit of Luffy in OnePiece! Pasapañuelo / scarfring / neckerchief for Scouts or CubScout
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Replaces traditional vertical outlet. This is a slight derivative of the work by @Chriswak at https://www.printables.com/model/115385-duplex-outlet-shelf It has fewer holes and a flat top to accommodate larger items.
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for PETGSource material: PET
Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Hallbar pull out frame For some reason I lost the pull out frame for my Hallbar 10L bin. This Frame is holding the bin bag in place. Ikea Germany don't have Replacements for lost Polypropylene Frames. So lets go and create a new one… It…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant
Woggle Guides and Scouts from Chile neckerfhief or scarf ring. WAGGGS
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Small holder to mount your Sonoff zigbee brindge on wall or another place. It is possible to use some of the prepared holes having a diameter of 2 mm for mounting. The second option is, for example, the use of double-sided adhesive tape…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
By Spencer_3D this is one of my models I designed, and items I sell on eBay. NY logo outlined, just adjust to size you need or scale. I use pla or pla plus filament at 0.2mm height settings. With white outline and dark blue NY.
Print approx. €8.36–€10.22 excl. taxPreliminary estimate for one variant
A set of parts bins for the Milwaukee PACKOUT 3-Drawer Tool Box (48-22-8443). Based on @pmirf_140495's design, but these should fit the newer tool boxes with the added reenforcing ribs. I also added a set of bins which can be inserted for…
Print approx. €5.38–€6.58 excl. taxPreliminary estimate for one variant
SPoRK3 (also without label / clip) It's a spoon? It's a fork? In any case it's 3D printed! Due to its asymmetrical shape, it can be optimally printed lying on its side. Note: Only use food-safe plastics Clean and disinfect thoroughly…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Remix of "Hat Holder" by Bucio.Boi. Simply filled in the screw hole using Tinkercad so it can be mounted with command strips or double-sided tape instead of screws. This avoids having to drill into your wall. No other changes were made to…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…
Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
Die Anerkennung sollte an den ursprünglichen Designer gehen. Ich habe die Bohrungen verschlossen, dass Modell wird durch Kleben zusammengesetzt. Zusätzlich ist es gegenüber dem ursprünglichen Designs um 50% auf 40mm lang verkleinert, da…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Why?: All my funnels have narrow throats and do not have any grooves to allow air to easily escape the bottle as it fills. This is especially noticeable if you are using filters with viscous liquids. Due to having narrow throats they also…
Print approx. €5.64–€6.90 excl. taxPreliminary estimate for PETGSource material: PET
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Inside and Outside Corners Wargames Wall Sections - Section 3 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your…
Print approx. €7.64–€9.34 excl. taxPreliminary estimate for one variant
The last time I played Wyrmspan with friends, we ran out of eggs near the end of the game and had to scramble to use substitutes. (I'm not good with the multiplier tokens) So I decided to create a simple 3d printable one similar to those…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Kenny from South Park helps to hold your kitchen knives! At 100 % scale, the model has a height of 208 mm. The 8 slots on his head have an opening of 35x3 mm and a depth of between 90 and 110 mm. You may scale down the model if you want…
Print approx. €22.52–€27.52 excl. taxPreliminary estimate for one variant
This is a quick and simple print that is 90% hidden when installed. It helps prevent the annoying problem of your drawer dividers lifting up and out of the molded channel in the front of your packout drawers. Print instructions: Recommend…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
We often buy other brands of Nespresso capsules, such as the Jacobs or Omnia capsule in the picture. These are often not packaged in the same way as the original. Thanks to the designer of the original model because it works great, I just…
Print approx. €6.96–€8.51 excl. taxPreliminary estimate for PETGSource material: PET
This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
When I designed the spout for 5-liter canisters , I also made a spout that is universally suitable for all kinds of canisters and bottles. The spout is fastened with a knurled nut and sits firmly and tightly on the neck so that no liquid…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Wall mount for LEGO Creator Porsche 911 with or without LIGHTAILING LED Set. Battery Pack on the right or left side of the model possible.
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET
I remixed Jonas whistle with a scout sign emboss. Now updated! with 2 new models.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Outlet holder for a slightly rounded outlet bar. I found some other other holders, which did not quite fit this three-plug, slightly-rounded design of my particular outlet, so I designed my own. It only needs one part to hold a short…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Fallout Vault Boy Head. Put a light in it.
Print approx. €8.38–€10.24 excl. taxPreliminary estimate for PETGSource material: PET
🐾 Stay hydrated on the go! This Outdoor Pet Water Bowl makes it easy to keep your pet refreshed anywhere. Just screw a standard plastic bottle onto the bowl, tilt, and water flows in. When your pet finishes, tilt the bottle back and the…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the radius finders created by victornpb with inset numbers instead of raised.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
