nvida tesla m40/p40/p100 90mm fans adapter
适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4
- Downloads
- 690
- Likes
- 35
- Rating
- 5
78 models
适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
Fan ducting that can fit an Nvidia Tesla Pascal-generation P100 and possibly P40. Maybe even more! I'm not sure. I don't own any of the others. I am not good with computer. Or 3d modeling. If this isn't perfect, I'm sorry, please teach me…
Print settings: Printed with support (I printed it with "normal" support, tree support may also work) Short version may also need supports on the inside 3 walls 20% infill Comes in 3 lengths Includes printable gaskets for better…
# Dual NVIDIA Tesla P100 Fan Shroud — One 120mm Fan, Two Cards (KZM) **One standard 120 mm fan. Two passively-cooled Tesla P100s. Field-proven at 63–68 °C under full load.** The Tesla P100 gives you 16 GB of cheap HBM2 muscle for home AI…
3D-Printed adapter for 2x40mm fans on a Nvidia P100 GPU, this part is friction fit only and will hold on very good without screws or glue. Probably also works on older Nvidia tesla cards like the k80, but not tested. I used Fujitsu 40mm…
This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
You can use this mount on the Ikea Bekant sit/stand electric desk . Print the 5 parts (Generic print outside part twice). There is a version for a generic square PC casing and one that is adapted to the MSI Creator P100X 11. Also you will…
Could not find an official enclosure so I made my own.
I created this mounting bracket after the one that came on my P100 wouldn't fit in my Dell Precision desktop. Using this bracket should allow it to be mounted in any standard PC case without any issues. While having it printed in plastic…
I love my P1000f pedals from Simagic for many reasons, but the original pedal plates are not one of them. I found them too slippery and small, and the curvature is not precisely “sporty”—at least for open-wheel racing. My take on the…
Speedloader in flexible TPU for 357Mag Ruger GP100 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15 Infill: 20% Filament: Devil TPU Black Notes: Print slow! Real slow Category: Sport & Outdoors
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
I created this stand to support a revolver (specifically a Ruger GP100) vertically for storage in my safe. It may work for other models. For this style of print I've achieved adequate strength in PLA with 3 perimeters and no infill. Use…
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
For 1x 40x30mm turbine (75x75) For 2x 40x30 turbine For 2x 40x40 server coolers.
Dual adapter to connect one 92mm axial case fan to two GPUs Designed for an HP Z440, which leaves one PCIe slot width between the GPUs. Take the lower air intake case fan out of the bracket and attach it to the dual fan shroud, then turn…
i have redesigned the spacers because the original ones don't fit perfectly. if you're unlucky, the spacer in the cover breaks the first time you operate it. On the cylinder side, the spacer does not fit into the aluminum ring. i have…
Printing Instructions (PLA): Main Housing: 30% infill, enable supports (minimal/touching buildplate only). Other Parts: 15% infill, no supports . Layer Height: 0.2mm (recommended). Wall Count: 3 (recommended). Fan Specifications: Size:…
Full height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
Adapter for mounting an 80mm cooling fan onto server-grade graphics cards. When paired with a cooler (38мм), it extends the graphics card by 80mm. The adapter is printed without supports. I recommend using ABS. Build of Materials:…
This brake modification increases the usable space in the brake piston by freeing up unused space in the original design. This allows up to 3 springs to be used at once, significantly increasing pedal travel. Also, longer spring and…
Remix of an original on Thingiverse. Preferred a version for a bottomless PF and caught coffee grounds. Tested on a P100 revision that came with the Versa cup. Print Settings: Tested with 4 walls, 4 top/bottom layers for strength but…
I made this Lens cap for my friend. Lens diameter 77mm. Fit to Nikon CoolPix P1000. I used multicolor print. I changed the filament during printing. This is first version. Maybe I'll improve it later when it loses this cap again. Very…
A few months ago I damaged one of my PCBite SP200 probes. So i had to repair them. When i saw today those protective sleeve i thought lets print one of those. Unfortunately it didn't fit the SP200. So I designed a new one i started from…
The extension plugs that came with my Segway P100s kept coming out and I didn't want to worry about losing them so I sketched up replacements. They fit very securely (I can't remove without a flat head screwdriver to pry them out) but…
I've made an adapter for my enclosure to use P100 VOC cartridges and filters as a fume extractor. EDIT March 23' added a second layer and enclosure for some sound dampening and more filtration
The model is designed to mount 3 Tesla P100s to a 120 mm fan with high static pressure. I use an Arctic P12 Pro, which seems to be totally fine for normal workloads, and only struggled after a few minutes in a GpuBurn test where the two…
You can add haptic feedback to the Simagic P1000 Pedals using the official peripheral or you can DIY by using some relatively inexpensive components. You'll need: Nobsound USB Amp (about 45eur at the end 2023) two “resonance speakers”…
if you like make sure to click like, it helps me make more projects like this. make sure to enable support but use support painting with tree supports.
Hardcase fits for Nikon P1100 and P1000.
Printed in PLA with 0.2 mm layer height. Add a pause command at the beginning of the bridging layer and insert the key. The printer will print over the key, connecting the opposite sides of the sleeve, holding it in position. I'm using…
Blind Shaker holder for the Lagom P100. This uses a magnet to perfectly center the Blind Shaker on the shelf. The magnet is a 8mm x 4mm neodymium magnet you can find on Amazon or Aliexpress.
I couldn't find a fan shroud for specifically the CMP100HX-210. The ones for the v100 didn't work for this, despite what's said online. I made this for 2 40mm fans and M3 screws screwed into the plastic. I couldn't be bothered to add…
(Universal) 15mm Rail Mount fit (12&20mm) red dot sight scope Hot Shoe adapter UFO Hunters or Mother Nature Spy will Love This... ;-) Print Settings Rafts: No Supports: Doesn't Matter Category: Hobby
Fender https://aliexpress.com/item/1005002894389180.html holder_cup_optim - designed to mount a fender on the front wheel of a Segway P100s holder_cup - designed to replace stock caps Segway P100s The stock wing bolts do not fit, they…
You will need a 25.4 mm (1") metal pipe with a length of 255 mm. I used a seatpost from a children's bike. 4 bolts with nuts and washers M4x25 2 self-tapping screws 3x16 (optional) for fixing the pipe. I provided holes for them, but I…
You can adjust the path of the pedal precisely by increasing the size in the slicer / height. The Top is rounded so it dont caught by the Spring. The Spring has an inner diameter of 14mm. Print should be around 20 min. Printer Settings:…
This is a remake of my own model https://www.printables.com/model/564193-cover-for-rear-lever-segway-p100s, better suited for 3D printing. Of the minuses - the standard plug does not fit and you need to print your own version from TPU UPD…
This is a two part camera mount for a BirdDog P100 PTZ camera. It's designed to allow a P100 to be hung upside down under a balcony/ceiling. The BirdDog P100 is attached to the underside of the Bottom Camera Plate. The Upper Rail is…
My first crack at a Gridfinity holder! This is for the CRAFT911 P100 Pin Vise (hand drill) kit from Amazon ( https://www.amazon.com/dp/B098CF3VMM?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1 ). Let me know how it works for you or if…
Protective caps for front wheel bearings Segway-Ninebot KickScooter P100S Print with soft rubber-like materials such as Soft TPU. Be sure to use lubricant during installation. Sprays don't work. Added updated version of rigt cup Print…
There are a few brackets already out there for installed Nvidia Quadro P1000 or P620 graphics cards in the Lenovo M920q but I found them to be weak. Most of them attempted to keep the look of stamped steel and thus were too thin. They…
Keeps together without any hardware for me. No supports needed. Mouse ears on the outer corners protected against warping for me.
why do these caps always get lost. Here's a 3D model for you, brother. now you don't have to worry about losing the sprayer tank cap. specially designed for XAG drons
Dust connection for a 100mm hose in stead of the tiny 35mm thing that comes withj the saw Category: Parts
Needs a pretty high powered fan, I tried a 120mm 1,900rpm fan and it wasn't enough to keep the GPUs cool.
This is a replacement for any of the four clips that hold the headband straps to the GVS Elipse OV/P100 respirator . I have model number SPR467 (the M/L) size, but these likely also fit SPR466 (the S/M size) as well as many other…
STUP100-LD Boost Converter case, with button on the outside. Print parameters Printer: Creality Ender 3 Pro with Hemera DD extruder Material: ABS or as you wish Supports: No supports necessary, place it “upside-down”
Cover for front lever Segway P100s Print Settings Printer: Geralkom Vector 200 Supports: Yes Resolution: 0,2 Filament: any PETG any Category: Sport & Outdoors
Casio CSP100 piano comes with quite heavy power supply. It just hinders everywhere. So I created a simple PSU holder to pin the PSU to piano's wooden frame.
A speedloader for my GP100 in 44spc Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15 Infill: 40 Filament: Devil TPU Black Notes: Print it slow in a flexible material Category: Sport & Outdoors
I recomend petg for print
Made for receipt printer Star TSP100. I lost my wall holder so i created this one.
Hello, Je cherchais un shroud pour poussé l'air vers mon GPU V100 PCIe fanless dans un Z8 G4. J'ai remplacé le ventilateur en front par un des deux noctua ci-dessous Noctua NF-A12x25 G2 PWM Sx2-PP, Kit avec Deux Ventilateurs pour…
The handle is designed to carry the scooter over small obstacles. For assembly, you will need 2 self-tapping screws 4x20 and 2 bolts M5x35 and 2 washers for thread 8 mm Updated tpu part Print Settings Printer: Geralkom vector 200 Rafts:…
Print must be paused to insert 60*10*5mm bar magnets. A rubber band is required to secure the DP100.
Inner hole dimensions are 47x28mm, length is not so important. Model consist of cube with smaller and larger hole that you can just “plug” the WP1000 and inner wall will keep it where it should be. Theoretically you can resize this to fit…
This 3D-printable adapter is designed for the Maxwell MP1000 vacuum cleaner, allowing the use of hoses of different sizes. It supports outer diameters of 32 mm, 35 mm, 38 mm, 40 mm, and 50 mm, with corresponding inner diameters to ensure…
I wanted to build a programmable mechanical keyboard without an unfamiliar layout requiring me to re-learn how to type all over again. There are a few commercial options that almost fit the bill, but the only fully-programmable one isn't…
Wall mount for Star TSP100 series.
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
I did not fancy paying the full retail price, so I sketched these up based on images of the real items and measurements taken off my P1000i. Fit is spot on. Reuses original fasteners. Designed in onshape - available here:…
We needed a toilet cistern spare parts for a Geberit UP100. You can only buy the whole valve and not the little lever from it. I printed it with PETG-CF in 0.2mm layerheight. Have fun with it!
SFX PSU Mount LIAN LI SP1000P, made to mount the PSU under my desk.
A external powerbank holder for any cage/camera! I created this because my Sony a6300 really bad battery life. With this i have a LOT more recording time, better temps and better top grip! Needed parts: Adata AP10000QCD power bank, is…
Cap for covering the vestigial exhale valve on the GVS SPR644 ELIPSE P100 Elastomeric Half Mask Respirator with Source Control ( https://smile.amazon.com/dp/B095YBV2T9 ) to make it more clear to others that there is no unfiltered exhale…
***** UPDATED to V2 ***** ***************************** Fixed the mirror issues. ***************************** Why I built this The Tesla P40, P100 and M40 are passive cards. They were designed for server chassis with a wall of high…
Segway p65u / p100s steering column support ring. Installed above the bearing and pressed down by the stand. Опорное кольцо рулевой колонки Segway p65u / p100s. Устанавливается сверху над пошипником и прижимается сверху стойкой.
The plastic covers on my player broke - both the top and bottom. I made replacements.
A simple link plate designed to align and secure multiple Panasonic AK-HRP1000 panels into a clean, unified desktop setup-without modifying your table or rack mounting. This bracket connects units using their existing mounting points,…
Given that the Nikon P1000/P1100 features a 125x zoom, a stable tripod is essential to ensure steady images and video; that is why I built this mount to avoid having to manually adjust the focus or zoom. Everything is controlled via…
Printing Instructions (PLA): Main Housing: 30% infill, enable supports (minimal/touching buildplate only). Other Parts: 15% infill, no supports . Layer Height: 0.2mm (recommended). Wall Count: 3 (recommended). Fan Specifications: Size:…
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
There are a few brackets already out there for installed Nvidia Quadro P1000 or P620 graphics cards in the Lenovo M920q but I found them to be weak. Most of them attempted to keep the look of stamped steel and thus were too thin. They…