Panel Key Chain
simple panel key with a hold to attach to a key chain
- Downloads
- 1,228
- Likes
- 241
- Rating
- 4.83
6,458 models
simple panel key with a hold to attach to a key chain
Randal at his instrument panel Monsters Inc.
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
I liked Cameron's design for a cover panel, but needed one with a cutout matching for my choice of a thick cable going out through the side. Maybe someone else has use for it. The opening was made to fit a twice isolated RKXB, 2x1.5mm2…
Conductor for 18mm panels remix by voltNik Ремикс кондуктора от voltNik'a для панелей 18 Remix from https://www.thingiverse.com/thing:5228089
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Qidi Tech i-Mate S - Side Panels Simply glue 6x2 magnets in the holes and you're done. Have fun ! Qidi Tech i-Mate S - Seitenpanele Einfach 6x2 Magnete in die dafür vorgesehenen Löcher kleben und fertig. Habt Spaß !
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
PanelDue 7i Cover for CaribouDuet This Display Cover attaches the PanelDue 7i to the front of the CaribouDuet 3D-Printer. Print instructions 0.2mm layer height 20% infill No Supports needed
Allows mounting of a 3/16 panel to 8020. Needs a ¼-20 1" Cap Head Screw, and uses standard 8020 tnut, drop in, or low cost.
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…
Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…
A Hueforge manga panel of Gyro Zeppeli from JJBA: Steel Ball Run. If you try to print this, I would like to know how it looks like with darker blue (originally used as shading, but I don't have a blue filament that dark). I'd be glad to…
Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…
This is a remix of the excellent headphone holder from @LayerCake for sliding onto a 5 mm wide panel. --- German description --- Das ist ein Remix des exzellenten Kopfhörerhalters von @LayerCake zum Aufschieben auf 5 mm breite Panele.
Primarily inspired from this Instructable I build an ATX-Powersupply. As I had a metalcase laying around I just printed the frontpanel. List of elecric compnents: See Instructables. Size: 234 x 96 mm Adapt it for any other housing using…
Organizér kancelářských potřeb na stůl, včetně držáku USB pamětí, SD a MicroSD karet. Dále integrován telefon Samsung S6 jako podružný panel Home assistant. Rozděleno na jednotlivé plošné prvky - spojeno pomocí šroubků a matiček M3.…
Tool holder for Wera Kraftform Kompakt 62 with 33 pieces. https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_without_ratchet_functionality_kraftform_kompakt_60_62_kk_62.html.html (No. 05059297001) This version is for…
One of my JVC TM-90 PSN video monitors lacked the flap covering the front controls. So I recreated one following the design of the original to the accurately. The print is divided into the door itself, which is printed lying on the print…
Služi ako nastenny držiak dialkoveho ovladača
I needed to add more switches to the old panel and couldn't find any new ones that would fit the hole and or looked good. I added a diesel heater to the garage and needed more power and also wanted to add a switch so I could shut it off…
I needed something like a panel-latch for a not-a-voron. I was using RichardM's Voron 2.4 Filament Latch on my Voron. I thought about modding his for my purpose, but decided to re-implement it myself and make some improvements. Heavily…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
This fastener is sized for a 6mm hole, with a 14.1mm head diameter. It can be scaled as needed. The model is based on the dimensions of Honda part no. 90683-GR1-003. I used it to attach body panels on a Honda CBR929RR. Compared to other…
Overview This is my second version of the Ring Lamp. First version is available here: https://www.printables.com/model/929809-ring-lamp In the beginning I wanted to change only a base and add some new Halloween panels in the Ring Lamp but…
Overview This is my Christmas set of panels for my Ring Lamp It work with Ring Lamp II available below - there are files for lamp and instruction https://www.printables.com/model/1043648-ring-lamp-ii-with-halloween-panels The panels work…
Introduction All other modular Skadis models I have found either omit holes, or split holes down the center at the seams. I didn't like that look, so I created my own from scratch. Before I start, there's a lot of documentation here, not…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
Until you find a purpose for the hole in the right panel of Core One, this cover will keep dust out and heat in. I recommend printing it in PETG or any filament that can withstand 55°C of a fully heated chamber.
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
10-inch patch panel with 12 keystone module space. It's designed and created with OpenSCAD. The standard unit width is 44.45 mm, but to save some space for my very small network rack, I used 30 mm. You can change the module_count variable…
A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
Greebles! Entry panels, hatches, and more! No support required Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff: Construction: Building under…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
If you like, throw a hungry student a Tip so i can make more cool stuff! :) https://paypal.me/jpal85 40x14mm, 3mm thick base. Uses M3 hardware. Prints fine without supports at 0.2mm. Takes about 24 minutes at 65mm/s. Some off brand XT60's…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
This spacer helps reinforce the edges of the panel for mounting hinges or providing extra room for an internal spool holder. Recommend knurled heat-set inserts with this spacer unless you select the M3 nut version. If you have never done…
The Rigid Molle Panel For Custom Organization V2.0 is a remix of my model Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution: 0.20 Perimeters: 3 PEI magnetic sheet Bed Temp: 60c…
Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…
You can see a great example of this HEX Panels on Engineericly 's YouTube Channel. I printed mine with 100% size (you see it on the pictures), but next time I would rather use 120% or more, because it makes threading the LEDs easier and…
3D Printed shelving system with snap together parts. https://youtu.be/xgLI_G_G63o https://youtu.be/Rua7R26Sotk https://youtu.be/c63ayOe9OTc Customization Basic Panels 1x1 (Use for test prints) 2x2 3x3 4x2 4x4 5x5 6x1 6x2 6x3 6x4 6x6 7x7…
– Edit 01/08/2024: Added 10 PrusaXL versions (300mm x 300mm, 11.8 inches) of the panels, they can be found over on their own model page here. Based on the panels featured in this Youtube Video by 3D Printer Academy and not being able to…
Hexagons maker everything better! Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping…
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
Unscrew the panel clip every time you want to fix something inside the voron chamber is not fun so that is why you are here. These will replace the left, right, and top panel clips. Use same screws same t-nuts but you need 4 pcs of 6x3mm…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
Make the Prusa CORE One your own! Our new printer is designed with modders in mind. Since we’re using proper metal almost everywhere, you can easily design all sorts of holders, organizers and shelves, and attach them using magnets to the…
The Parabolic Wave Grid Panel #1 features an intricate parabolic wave pattern, created by extruding squares at varying heights. This versatile design looks incredible in various finishes, including tricolor filament, color-shift pigments,…
Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…
2024 revision: 16 port version now has cable strain relief I published a revised version of the 16 port model with cable strain relief features (and a few other small improvements)…
Forgot to order patch panel for my new 10'' rack server case… therefore i've made one. Suitable for 12 keystones no matter if HDMI or RJ45. Using keystone model from: https://github.com/marcuswu/RJ45KeystoneReceiver
Cover Panel for 5.25 inch optical drive pay on a PC case. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same hook-length for their Drive-Bay covers. Measure the hook positions of the drive-bay…
I printed my clips out of abs and glued them together with superglue! All super glue is not created equal in the case of abs locktight works wonders. These clips were used to put the panel back in the drivers side foot well where the…
Remix of glsf91 model https://www.printables.com/model/138644-solar-panel-water-draining-clip-for-flat-roof This model fits 35-40 mm panels, 8 to 12 mm lip. Measure if this fits. Should fit DEMGC 485, 490, 495 W monocrystalline panels.…
This model was made for those of you who do not want to buy those expensive wall panels. I decided to model these for a similar look and ease of use/installation. Measurements/Requirements: I modeled this to fit the Ender 3 3d printer.…
10" Server rack 1U panel - Tray Designed 2022.09 thing:6196392 printables:569024 TOC 10" Server rack 1U panel - Tray TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel generic trays Description Trays for 10" server…
We all have many tools lying around and often we put them either in drawers or just being messy at the table. I liked this idea because of the slotted design that don't require very complex geometry to mount the pegs or anything to these…
edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…
Masonry/stone wall panel for tabletop gaming terrain builds. Default 134 x 134 x 3.0 mm. Scale and trim using slicer as required.
Things you wanted to know before: Be aware of the effort involved in this project, you can't just put everything together in 10 minutes. You should also be good at soldering and know how to handle cables. It took me about 3 hours to…
I needed some blank panels for my large-ish eurorack cabinet, and while they seemed like the perfect thing to 3D print I wasn't happy with any of the designs I found, so I designed my own. Included are several variations in sizes, and the…
If you have a Creality K1 SE printer and want to add an enclosure for ABS or ASA prints look no further. I used Henlor's CAD model as reference to the panel removed all chamfers to the bolt holes to satisfy Sendcutsend's website. Also,…
The XT60 connectors are glued into the printed parts. I used a 2-component epoxy adhesive. Uses M3 countersunk head screws.
Star Wars episode 8 & Andor Droid Access Panel This a basic "Free Version". The Full Multi-Part Version is linked here https://retrorhobbies.etsy.com/au/listing/4300398181/star-wars-droid-access-control-panel Retro Realistic Hobbies…
Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…
This model is a simple 12 port patch panel which can be printed easily without supports. Print with 0.2mm layer height. Fits on a Mk3 printer if oriented diagonally. Will fit slightly bigger printers in default orientation. The model is…
Unfortunately my P1P is not coming until January, so I can't fit and check the parts yet. It would be good if someone could print and install them so we can check the fit. Important Update: 23.01.2023. Printing these Files is complicated.…
Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…
Solar module drain clip for 30mm panels. Wonderfull in flat roofs (<30º) It drains the panel completely avoiding accumulation of dust. Insert it in the lowest panel side. Solar module drain clip for 30mm panels Tested with AE Solar panels…
The Honeycomb wall attaches to the side of the Prusa Enclosure, to provide attachment point for any of the HSW compatible tools. The sub panels lock together to create one continuous uninterrupted Honeycomb Wall. No need for…
You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the side and back panels for the CFS riser. You will need to print 3x Left…
I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.
Important: Voron Design "Cable Frame Anchor" model has been modified to make this convenient and easy to mount panel clip. Support my work by purchasing printed parts from layer.guru - premium quality custom printing services. Suitable…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Introduction I recently picked up the Lian Li A3 case for a Computer I was building. Unfortunately, the wooden front panel offered by Lian Li wasn’t available here in Germany. As a maker, I couldn’t just leave it at that. So, I designed…
I designed this Rigid Molle Panel For Custom Organization in SOLIDWORKS for the Printables Ropes, Cords & Straps Gear contest. Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution:…
Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…
Inspired by the existing thing that costs way more than it should, i designed this hook to be stuck between 2 mdf slats of an acoustic panel. I am not equipped to do weight tests, but it should be enough to hold large picture frame. I…
Please check back periodically, as I will be regularly adding more panels! As always, I'm open to suggestions. Feel free to drop requests in the comments! And, if you would like to support my work, please visit my Ko-fi ! - RAF = OnShape…
…Please be sure to hit like & post a make, I'd love to see your prints! For use with model: https://www.printables.com/model/594894-voron-24-trident-canopy-top-hat-remix-split-model- These clips will keep your top panel sealed & secure in…
NORM Hexagonal modular wall panels
olar cell, solar panel, 0.2w , 5w, 10w, 20w, 30w, 50w, 100w. Typical sizes in monocrystalline taken on Aliexpress.
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
This Centauri Carbon panel hinge set is an improvement over our original version. The most significant improvement is the drop-pin feature, which now enables the panel to be quickly and easily removed. Designed for a 7.5 mm spacer. Here's…
A 8-port, 1/2U, keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others…
Been looking for a way to display my diecast collection with the help of 3D printers. Discovered IKEA Skadis boards and all the cool items made to be used with them. Been looking for some designs to print my own boards and I liked Asraff…
Cover insert for a switchboard when there is an opening after a removed circuit breaker. The model is attached so you can adjust it to your desired width. The insert is not too stiff not too flexible, so perfect to be placed in place and…
a320 Overheadpanel (Not completed).
I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…
FT PANEL CLIPS (for 2020 extrusions) FT Panel Clips work with Voron 2.4 / Trident or any other squared frame printer using 2020 extrusions. They have been designed to remove the need for any hardware (hammer head t-nuts and screws).…
Introduction The two models provided here are simple test prints to find out how a lithophane will turn out with a specific filament and illumination. All Lamps of the Solar System Lithophane Planet Lamp Collection use a maximum wall…
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
This model is designed to mount on a 3mm panel and comes in three angles relative to the panel 0°, 30°, and 45°. The mounting pattern is an equilateral triangle with sides of 26mm. You will need to drill three 3mm (or 1/8") holes and one…