291 models
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Introduction I designed these hex shelves to organize my benchy collection. I wanted a way to record both the material properties (manufacturer, material, color name) while displaying a benchy and this was my solution. I have uploaded…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Successor: https://www.prusaprinters.org/prints/129190-stackable-box-with-label-parameterized-freecad Remix of https://www.thingiverse.com/thing:4423729 Changed wall thickness to 0.9mm. Original in F360, re-done in FreeCAD. STL files…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
There are lots of dust catchers out there for drilling into drywall walls. But I had to drill holes in my plaster ceiling. A lot of them. So I built this. It worked great for its main purpose. I have since parameterized it so it should…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
This is a Fusion 360 parameterizable funnel. I created this because I had to fill the base of a standing punching bag with sand and the fill hole had about an inch of clearance from the bag itself. I tried the few different funnels I had…
Print approx. €7.29–€8.91 excl. taxPreliminary estimate for PETGSource material: PET
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Mom wanted something to hold her quilting rulers and, by Jove, I wanted to be a good kid and make Mama happy. I didn't know what the optimal dimensions were so I put together a model I could iterate on. Changeable parameters ( Autodesk…
Print approx. €16.38–€20.02 excl. taxPreliminary estimate for one variant
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…
My first attempt at iPhone 15 case. My daughter got a new phone, and the case (ordered online) was not due to arrive for a couple of days. I had a reel of flexible PLA, and figured that I could print one. But I couldn't find any existing…
2024_05_28 Newer version of these files is located here. Old files still work fine and are still posted here. works with customizer and has more options for editing pre-entered data so only have to turn unwanted holes off. easier to turn…
This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…
This is a remix of another spice rack I found here; everything should be customizable by user parameters in Fusion 360. included stl files are for reference, adjust the sizes based on your hardware and space in Fusion 360 and export your…
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
A simple bead roller for creating spherical beads from clay (or other materials). I've provided models for 5mm, 10mm, and 15mm diameter beads. Happy to generate additional sizes on request. Parameterized so you can generate your own sizes…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty…
Why use NoFoams (or any other 3D-printed foam alternative)? They allow for more tire conformity while stopping the tire from rolling over too much when side-hilling or turning. Designed for use with scx24/ 1/24th scale rc cars however, I…
Edited remix of a great parameterized rugged box using OpenSCAD Waterproof when using a TPU gasket Uses M3x 30mm screws by default - two for each clip. Amazon link (Or other sizes, customizable) No nuts required, uses tapered holes…
Modular display stand for Lego Speed Champions, parameterized for more customization including a parameter for the tolerance for a good fit no matter how (in)accurate your 3D printer is. The attached STL files worked on my printer. I…
A stand for your CD collection I have attached the files for 6, 10, and 12 CDs. I have also included the Fusion 360 file with a changeable parameter for how many CDs you want it to hold. To do so, open the file, go to modify, parameters,…
Parameterized Card Stand for Ultra Pro Toploader This is a fully parameterized Card Stand for Ultra Pro Toploaders to store your TCG Cards. The included STL-File contains a 0.2mm tolerance for the Toploader dimensions. You may have to…
This project includes an scad file that can be easily edited with OpenSCAD - The Programmers Solid 3D CAD Modeller. You can edit: the key sizes orientation of the keys select cone or cubiod tool shape widths and heights The tool itself is…
A cute travel pill case with three compartments and a pleasing texture. The bottom of the inner compartments is rounded to make it easy to slide pills out. I've provided two sizes and also parameterized OpenSCAD files to customize…
The fusion 360 model is parameterized, so you can adjust the numbers in the parameters to have it auto adjust the file. It has a centerline hole so you can align your template on the workpiece, finger holes so it can be held tight to the…
OpenSCAD script to generate parameterized elbow pipe. I've created it for my woodworking dust collection system, but i believe it will work in many applications. You can define: wall thickness first connector outer diameter / length…
Did the world need another LED light strip clip? Probably not, but I designed this for my specific needs and thought others might be able to use it. Standard printer settings. Print with the opening up and no supports are needed. If you…
Fully parameterized Fusion3d model for Tanos/Festool Systainer organizer boxes (shorter systainers with clear lids). 68mm tall (also parameterized). Parameterization allows you to specify the number of "units" (squares in the Systainer)…
This is a remix based on the NUT JOB factory https://www.thingiverse.com/thing:193647 The gland size is control by these three variables. gland_inner_diameter = 10; // The diameter of the inner channel. the outer size is always +5mm of…
Create dry measuring scoops in any size. (common sizes provided as examples) Pre-published STLs print nicely at 0.2mm layer height, no support, no brim To customize: install OpenSCAD and Overpass Font (Optional) create MeasureScoop.json…
One can use the following 3 parameters to define the requested lidded box size: BoxOuterLength - Min 40mm BoxOuterWidth - Min 38mm BoxHeight - Min 35mm While the minimum values are presented - the maximum values are limited by the printer…
This desk cable guide has an integrated hinge which is locked with 2 magnets. The assembly can be mounted to the edge of a table with a Power Strip. The adhesive strip is designed to be on the top because the table it was designed for has…
A version of Wireheadarts' OpenSCAD HSW model that supports corner pieces and has a few small under the hood improvements. See the description for that project for details on how to use this.
Parameterized insert boxes for Sortimo T-BOXX G (63mm tall, 52mm square) organizing containers so that you can print sizes that Sortimo does not offer. These inserts are designed to stand on small 2.5mm feet in each corner and therefore…
A holder for screwdrivers in Gridfinity boxes. Flat for easy storage, holes on lower holder so the screwdrivers don't fall out if you tilt the box up. Easy removal - just tip on the bottom of the screwdriver; the hole is angled so the…
I created this a few years ago after seeing a very nice bent plywood side table that came with a couch. I didn't want that couch, but I really liked the look of the side table, and it seemed like a great place to add a remote control…
What this is This is an organizer I designed for my french cleat tool wall to store boxes (and box like things) on the wall. This design is parameterized, you can customize it in OnShape to make it any size you need. If you want to use…
A box that holds DIP ICs. Original by BadRAM was slightly too short for my taste and the walls were a bit less consistent than I'd like them to be. So I recreated it using OnShape.…
Designed a shop vac nozzle for my brother that has a slot shaped entrance. Fully parameterized for all the critical dimensions. I printed in PLA with 6 perimeters and an internal brim.
Yeah, another fidget spinner. Perfect way to kill time while riding the busses or train or plane… This one is small enough for me to be able to spin it holding any of the bearings. https://www.youtube.com/watch?v=gKC6Y0NgYXU Print…
Here is the parameterized version of the push latch case. You will need fusion360 to make changes to the parameters. The minimum possible size is 41mmx11mmx28mm (LxWxH) I would recommend extending the length and width over height, but if…
Modified wrench holder https://www.thingiverse.com/thing:3242936 with optional clip. I did this as a replacement for the bracket (see photo) which took up too much space. UPDATED 2023-12-31: Better customizer comments.
This is for Neutrik XLR (male and female, NC3MX / NC3FX) with outside threads. Should you need a right-angle cap for inside threads (NC3MXX / NC3FXX), please check out this great model by @AcEKrystal:…
This model extends your electric box. This is sometimes needed when the box is not flush with the drywall. The f3d file is parameterized to allow for customizing the size for your specific needs. It allows for left and right depth,…
This allows you to generate yarn bobbins for most spinning wheels and eSpinners. Included are some stl files for a few types of spinning wheels, but there are also Fusion 360 Files that allow you to change parameters and generate bobbins…
This is made to go between a G4 instant mounting plate and the camera to bend the mount to a user-provided angle. Has a carved out base for screw clearances. The pictures included demonstrate how to use the .f3d fusion-360 file to specify…
This is a screw mounted zip tie mount. It fits 4mm DIN screws, but you can edit the .scad file to make it fit any screw or zip tie. To customize, you will need OpenScad and the dimensions relevant for customizing (just measure them but…
Features: Thin walls (0.9mm, 2 perimeter) Place for label Stackable Change size in FreeCAD model FreeCAD version used: 0.20-27319 (weekly build). Good results achieved with 0.3mm layer height. Sizes (l/w/h): 100x50x25 100x100x50 100x50x50…
This is a cable gland of the type where "fingers" are pressed against a gasket by a cap. The nut attached to the core of the gland is supposed to be used when screwing on the cap while the loose nut is used to attach the gland core to box…
The model is designed with FreeCAD and is parameterized, so you can easy adapt it to your own mouse gate.
There are three unique parts, each of which must be printed twice: ULock cylinder holder (2x) maintains spacing between cylinder and rack. It is intended to be relatively loose, as it only holds the cylinder in place while attaching the…
Print with many (>4 perimeters) for additional strength. Use OpenSCAD to change the number of tube slots and their size. Use SKADIS universal hooks to add this to your board: https://www.printables.com/download:4801557 Based on this model…
Hello! I really enjoy Grandpa Amu's Lu Ban builds, so I decided to make my own version of Lu Ban 's stool. I haven't seen anyone use tape on a 3d print like this, but let me know if someone has. It allows me to print pre-folded flat…
This is a simple camera cover for the Macbook Pro. There's very similar designs out there but none of them were a good fit for my machines. These are for the 2021 16" and 2023 14", they are very slightly different sizes. I've included the…
This is remixed from petolone 's remix: Parameterized Smart compact temperature calibration tower . Original Smart compact temperature calibration tower by gaaZolee : https://www.thingiverse.com/thing:2729076 Couldn't add both as original…
This remix makes it easier to make new dispensers for different sized disc magnets. Includes a couple quality of life enhancements, most notably being the knurled screw cap.
Parameterized Rocker Switch Cover Plate and Box Messing around with setting up parameters on a model. Uploaded .f3d and .step files for customization. Edit parameters to your liking. Print settings for Photo examples: PLA 0.4mm nozzle…
I wanted to store my Bambu Lab build plates on my ARC-PEGLAGO panels for my P1P so I created this. Build plates are oriented with the cleaning tab facing down. This model has five slots but I've included the Fusion 360 source so it's easy…
Parameterized Drawer Insert with presets for Allit EuroPlus, Festool/Makita Systainer, Bosch/Sortimo Boxx. They all have a rim on the top. Measurements Outer Length/Width/Height is always used as the outer measurement, so if you do not…
For reference, the official medium top hat is 25mm and my pictured print is 31mm. BOM Part Quantity Notes 10mm x 5mm x 2mm neodymium magnets 4 the ones I had on hand were 9.5x4.5x2 so you might want to test that part of the model before…
I shave in the shower using a safety razor. But I don't have any great place to put the razor when it's not being used. This holder lets me hang the razor up high so it's out of the way, and so it doesn't sit in a puddle of water all day.…
*** V2 Update *** A parameterized model has been added so the design can be adapted for other devices and hardware. Design Notes This mount is designed for a sim racing rig and has protrusions to fit within the 8020 frame. The hub is…
7/27/2023 update Tweaked spacing for layout Added new version using pins for PowerPole pair retension rather than the “click-in” method. Can make assembly easier. 7/29/2023 update Added a “shell pusher” to assist in assembly of the…
Just some handy hooks to hang things on closet rods- Enjoy parameterizing to meet your needs for that satisfying SNAP when you clip them on! You can control the angle of each opening, tolerance, thickness, etc. These are sufficiently…
english Simple postcard holder - parameterized This simple holder can be used to present postcards or postcards for selection. The size can be adapted to your own requirements using the parameterized openscad file. A variant in portrait…
Use the parameterized clip to join parts. I will be posting a horizontal knife block using the clips soon. The angled clip option is based on https://youtu.be/RTQjvYENR7w by Slant 3D. The male and female parts are aligned in the code so…
A customizable Card tray. The code will automatically slant the cards to make them fit. Basically it does an Inverse Cos of the (box height / card Height). The length is a sum of the slots plus the extra due to the slant of the cards and…
These deviders separate the Neopixel LEDs from each other. You need 4 of them (the picture shows 3) and glue them together. The inner sidewall is half the width of the outer one. The model is fully parameterized and includes cutouts on…
Gridfinty bowls Generate bowls for the Gridfinty system automatically using OpenScad. Adapt to your needs This model uses the excellent gridfinity-rebuilt library by kennetek. The script is attached, so you can simply adapt it to your…
Are you too precious with your notebooks? Are you particular about paper? Do you like binders, but wish they could fold back on themselves? If you answered yes to any of these questions, then this DIY refillable notebook might be the…
Part of Ed's Skadis Shop Stuff collection, a set of Skadis holders and gizmos intended to have pleasant affordances and share common visual design elements. Fits the Skadis Universal Hook by CSD_Salzburg. Uses the Slide-Down Universal…
This parameterizable OpenSCAD design allows you to print out brackets to attach anything in the wonderful Multiconnect ecosystem onto 2020 profile T-slot aluminum extrusion rails. I currently support two different variations of the 2020…
These are Brackets to fix a divider board in a drawer. The f3d file is fully parameterized for easy customization. All files print without support if you orient them accordingly. By adjusting the parameters of the model to fit your drawer…
The parameterized file contains the casing and one drawer as individual render options (print this as many times you need) fitting the slots in the casing. The casing is partly open on the back to save filament and to allow the drawer…
All new Version 2, a Completely different latching mechanism inspired by user Mr FuFu. I modified his solution and instead of basically forcing two nubs passed each other as in the old design there is a graceful piece that bends and snaps…
This was originally designed for print-in-place only, but the links now include an angle to help post-print assembly. There are parameters to help with stickiness if your calibration is off. I've included a couple of 10mm x 20mm and 20mm…
This is a fully parameterized fusion model for soldering together stained glass at different angles. This model should be compatible with angles from 40º to around 155º (but in theory, it should work for any angle between 1º and 179º!)…
Create Your Own Parameterized Rear Bike Light Mount A downloadable STL is included for quick Viewing. If you find it useful, a follow is always appreciated! (Copy the file and customize it)Onshape Link:…
I created an OpenScad script to parameterize the Drawer2x2x1 and the Drawer2x2x2.
I took the liberty of parameterizing the .f3d model to make it easier to adjust the size. Right now it is for 88mm x 63mm cards. To resize: set the “CardLen”, “CardWidth”, and “DeckThick” parameters to the actual size of your cards and it…
Yes another box, but I couldn't find one that completely filled my needs. Features: Honeycomb or Spiderweb mesh so that you can see what is inside without opening it. Or you can have a solid lid. Snaps tight, squeeze the sides to open No…
An ultra-thin (0.4mm) Macbook camera cover that's only one perimeter thick. It still fully blocks the camera! This is a remix of https://www.printables.com/model/913267-macbook-camera-cover-parameterized The original model was quite thick…
You have a part mounted on your thing at position A, and you need it to be in position B, using the original screw holes at A. This is what you need. This will create an adaptor or jig that mounts to the part's original location and…
A parameterized version of the kitchen spice shelves that you can easily modify for any sized spice jar or cabinet Options include: Height, width, depth Number of dove tails from 1 to 3 (or optionally hide the male or female dovetails…
An Y-Axis GT2 belt holder suitable for the heat bed frame holder from Bohrers Shop ( https://shop.bohrers.de/heat-bed-holder-anet-a8-und-a6-kommt-in-kuerze.html ) but it should also fit on the stock Anet H-frame (the holes do) and…
All credit goes to jodoll and his Parameterized Power Strip Mount . This is a fully parameterized mount for power bricks and strips ! Create brackets to mount via the ends of a power strip or a strap that will cradle any rectangular…
Part of Ed's Skadis Shop Stuff collection, a set of Skadis holders and gizmos intended to have pleasant affordances and share common visual design elements. Fits the Skadis Universal Hook by CSD_Salzburg. Uses the Slide-Down Universal…
Tissue / Kleenex box holder for use with command strips. Parameterized and the Fusion 360 file is included. Use a brim to minimize warping. Fusion 360 Parameters Parameter Name Description Default BoxWidth Width of tissue box 228mm…
I found the model by @Sebastian_57252, but it was for (apparently) European carpenter pencils. None of mine remotely matched the size of his original model, but since it was distributed as a Freecad model, resizing was easy. I modified…
The X-axis motor mount on my printer doesn't provide for a tight fit with the included hardware. One of these spacers will tighten it up. It was an almost trivial design to knock together in OpenSCAD. I've rendered it in 1 mm increments…
Parameterized Rocker Switch Cover Plate If you like this model, check out the updated version: Parameterized Rocker Switch Cover Plate and Box by McTech3D | Download free STL model | Printables.com Messing around with setting up…
This is an OpenSCAD implementation of the openGrid system. This is a very basic implementation and it's missing some notable features, such as connecting pegs. I'm happy to add features as requested.
3D printer spare parts organizer for parameterized tool box. There are two organizers that can be added one on top of the other (see pictures), inside the parameterized toolbox made by @Scoott_143929. Inside the organizer 01 , the…
I added the parameterized Fusion360 file. Just change the diameters under Modify→ Change Parameters for the inner and outer diameter of your pipe.
I started off with ripetomatofetish's great round holder for the universal Ikea Skadis hooks . However I was missing a little bit of offset between the ring and the baseplate. In the end I did a major overhaul and added a number of…
