Search results: plate

Sort order

21,767 models

P
PrintablesMaple DIY

Build Plate Cleaner Microfiber Holder

Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
51,884
Likes
18,248
Rating
4.95
P
PrintablesFilip Honzárek

Corner Radius Router Template (5-80mm)

Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
3,245
Likes
730
Rating
4.97
P
PrintablesDonPrusa

Elgato Stream Deck MK.2 Faceplate

I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own. Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,896
Likes
152
Rating
4.77
P
Printablespick_nicker

Prusa Mini Front Plate Hexagon/HoneyComb Insets

I recently got my Prusa Mini+. After printing some addons, I searched for something to highlight the hexagons in the front plate. Since I couldn't find exactly what I wanted, I created these little insets in tinkercad. On my front plate,…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
1,452
Likes
409
Rating
4.9
P
PrintablesᗯIᒪᗪᗩ

Template Ruler with Electrical Diagrams

Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,372
Likes
531
Rating
4.93
P
PrintablesGizmo Gurus

DecoEdge: Light Switch Wall Plates – Single, Double, and Triple Gang Covers

Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,223
Likes
114
Rating
4.83
P
Printables3Dprintfun

Prusa Build Plate Holder

I have been doing some organisation of my work space, such as Gridfinity , and I had an extra Prusa build plate lying around (literally). So I designed this Prusa build plate holder, so that it would not be in the way and getting…

Print approx. €4.56–€5.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,185
Likes
384
Rating
5
P
PrintablesMiguel M.

Circle Template

Description Circle template, from 1/4 inch to 2 inches, in 1/8 increments. Corners are radius gauges, 1/4, 1/2, 3/4 and 1 inch. Printing Make sure your bed adhesion and first layer is spot on, details in the numbers are the most…

Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant

Downloads
874
Likes
165
Rating
5
P
PrintablesRobertusMaximus

Barrel on a diamond plate pallet

This is a remake of the ubiquitous Barrel, on a diamond plate pallet. Four models, with four through one barrels on a diamond plate pallet. Perfect for use as cargo, terrain, objective marks, as a load on your train, in a diorama or…

Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant

Downloads
834
Likes
225
Rating
5
P
PrintablesAndro

Notes To-Do template and box

Useful combination of a box and templates for your notes. The templates come in three versions: To-Do list, with a tick off field lines, for longer sentences blank, for you to add your logo The box keeps your desk clean and organized.…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
809
Likes
516
Rating
4.67
P
PrintablesTiffi226

Prusa MK3/MK4 build plate holder - steel plate holder // 3 slots

Remix of the model from grooveup - I just needed 3 slots to hold my build plates.

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
674
Likes
51
Rating
4.93
P
Printables3DReady

LEGO base plate for decoration or as a plaque/Płyta bazowa LEGO do dekoracji lub jako tabliczka

Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…

Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant

Downloads
644
Likes
56
Rating
5
P
PrintablesXtr3m3

Prusa Core One 6 build plate holder with handle

Quick remix of Pejek's build palte holder for the core one. I changed all slots to 1.5mm to handle the OEM Prusa Build plates and added a small handle to pull the holder off. Uses 10x2mm magnets. I have uploaded the F3D file. DO NOT USE…

Print approx. €6.22–€7.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
624
Likes
85
Rating
4.87
P
Printablesdym801

DIY Workbench Festool MFT drilling template (MMU)

Gabarit de percage établi Festool MFT DIY Workbench Festool MFT drilling template 96mm

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
601
Likes
96
Rating
5
P
Printableskaje

Raspberry Pi 4B Models and Template

These models and templates can be used to test the fit, or to mark hole locations, for other parts designed for used with the Raspberry Pi Model 4B. V2B - One piece; USB-C Power and HDMI ports printable but do not "work." Use this model…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
534
Likes
37
Rating
5
P
Printablescrashkg

Straight Edge Butterfly or Bowtie Router Template

This is a straight edged version of the Butterfly router template. I included the F3D file so you can scale it to whatever size you need. The inner butterflies of the template are included and are sized .1mm smaller for tolerance. Makes…

Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant

Downloads
530
Likes
130
Rating
5
P
Printablesideat0m

Cristiano Ronaldo - Template Stencil for drawing and painting

Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Cristiano Ronaldo Template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
494
Likes
29
Rating
5
P
PrintablesMario M

Manfrotto tripods quick release plate

If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
453
Likes
65
Rating
5
P
PrintablesSpeedy

GoPro Mount Template (Editable)

GoPro mount to attach the action camera to all possible surfaces with the help of double-sided adhesive tape. In my case to a fullface helmet. There is a hole where the hexagon screw can be easily attached. I would be very happy about any…

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
427
Likes
31
Rating
5
P
PrintablesWürth

Würth caliper holder for the perforated plate

Würth caliper holder for the perforated plate Introducing the Würth caliper holder for the perforated plate , featuring our innovative Click-In system for effortless installation. This tool holder is designed to provide secure and…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
420
Likes
92
Rating
5
P
PrintablesAdam

Pipe flange (escutcheon plate) in various sizes

This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
403
Likes
40
Rating
5
P
PrintablesMattStultz

Prusa 3D Community License Plate Holder

Are you a Prusa 3D community member and proud to show it to everyone? When you are sitting in traffic, make sure everyone knows you are going home to the best printer out there with this Prusa 3D license plate holder. Sized for US license…

Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant

Downloads
398
Likes
71
Rating
5
P
Printableskjrps

Cat stencil ruler, template / Schablone für Katzen-Silhouetten

Das Originalmodell war für den FFF-Drucker zu filigran und zu schwierig zu drucken. Ich schnitt viel unwichtige Bereiche weg und skalierte es auf 140%. Drucken Sie bitte unbedingt mit +0.5mm x-y-Compensation. Jetzt hat es die nötige…

Print approx. €0.36–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
390
Likes
65
Rating
4.8
P
PrintablesSzymonRychter

NEW BRING\THE RIDGE CARD WALLET PLATE

Replace your old plate for new one

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
390
Likes
57
Rating
5
P
Printablesr31joel

Tanos/Festool Organizer Sys3 SysGrid Sortainer BasePlate

Tanos BasePlate Printed with Aurarum Black Petg Set Skirt to 0. Recommended printing with a .8mm Nozzle at .4mm layer height ([email protected] is great but time consuming) May add Parametric .FCStd if enough interest.

Print approx. €6.81–€8.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
382
Likes
82
Rating
5
P
PrintablesRo3Deee

Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)

As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
380
Likes
53
Rating
4.75
P
PrintablesTickTock

EZ load plate for Prusa MMU2S Buffer

I added slots in the back so it can rotate back after one of the pins is removed (leave locknuts off) to facilitate loading filament. This is technically a remix of the OEM Prusa buffer but I could not find a way to point to Prusa's own…

Print approx. €6.04–€7.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
373
Likes
43
Rating
5
P
PrintablesBas

Anti Ventilation / Cavitation Plate for ePropulsion Spirit

My Spirit XS shaft outboard works great but sometime sucks in air from the surface leading to ventilation/cavitation and power loss, especially in reverse. This plate fixes that. Should fit both the Spirit 1.0 and 1.0 plus as they have…

Print approx. €7.71–€9.42 excl. taxPreliminary estimate for one variant

Downloads
360
Likes
14
Rating
5
P
PrintablesPetra Ollender

6 animals footprint paws template stencil keychain

It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
349
Likes
92
Rating
5
P
PrintablesTurtleku

Playstation 2 front disc tray plate replacement

Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
28
Rating
4.67
P
Printableskjpace34

Ubiquity U6+/Lite Single Gang Box Mount/Faceplate

This is a remix of Kai's Octagon Box Mount merged with hadigar's U6 Lite replacement mounting plate. Simplifies CamS' solution into a single printed item (no additional screw required). The standoffs for the octagon box have been removed…

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
24
Rating
5
P
PrintablesE3De

Peony Stencil Template

Template with a peony motif. Can be used for pencil drawing, airbrush or sponge powder paint. The pattern is suitable for wall, greeting cards, textiles and other decorations. Printing from PLA, without supports, layer height 0.2 mm.…

Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
102
Rating
0
P
PrintablesGabe Yoder

2 Gang Rocker Switch Plate

This is just a basic switch plate for a set of 2 rocker switches. I designed it as a jumping off point for a more specialized design and for practice using FreeCAD. I thought this might be useful to others looking to get a switch plate in…

Print approx. €1.88–€2.29 excl. taxPreliminary estimate for one variant

Downloads
292
Likes
20
Rating
5
P
PrintablesMcBig

Quilling circles template board

Yet another quilling template board with circles from 4mm to 41mm size.

Print approx. €4.24–€5.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
281
Likes
30
Rating
0
P
PrintablesMartin v R

Ikea Utrusta (and Blum Inserta) hinge template

This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
275
Likes
19
Rating
5
P
PrintablesMrNeedlemouse

RC Drift "JDM" license plate

License plates for RC 1/10 drift car, attach with double sided tape. Printed in 0.1 layers. Add color change in prusa slicer on the last layers to get multi colored print.

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
275
Likes
50
Rating
5

Drywall cutout Templates for outlets/switches

2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
267
Likes
13
Rating
5
P
PrintablesZdeněk

SOSS Hidden Hinge Mortise Router Template – All sizes!

Introduction This is a set of jigs that you can use to route the stepped mortices to install your SOSS invisible hinges. There are model files for every standard type of the SOSS hinge. They come in two flavours, depending on the…

Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant

Downloads
251
Likes
25
Rating
0
P
PrintablesHolger1969

Nanoleaf Shapes Triangles Drill Template (Bohrschablone)

To attatch Nanoleaf Shapes Trianglles with screws. After the Nanoleaf Support stated I should use a ruler to make drill holes for the Triangles I construct this drill template. Print with support! Printer: Artillery Sidewinder X1…

Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant

Downloads
241
Likes
27
Rating
5
P
Printablessternli27

Makita DPJ180 Plate Joiner Flachdübelfräse Lamello Box

Printed in two halves, because of the large size. No support needed. Connected by 2.5x8mm cylindrical pins and/or glue. There is a small gap when the box is closed. To make sure no parts escape from the organizer when the box gets tilted,…

Print approx. €16.41–€20.05 excl. taxPreliminary estimate for one variant

Downloads
234
Likes
57
Rating
4.5
P
PrintablesJSeppl

3DSets Landy License plates / Number plates

Collection of different license plates for the landy model from 3DSets. Overview Cal01 - 1 Color change. BadNews - 4 Color changes. BLOB Galactic Empire - 1 Color change (BLOB = Big Lump on Board).

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
46
Rating
0
P
Printablesdradam

Rivian Tow Hook License plate bracket for OEM plate holder with note 2/28/25

Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…

Print approx. €6.83–€8.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
206
Likes
17
Rating
5
P
PrintablesRobotAnna

Dishwasher Sign - colored plates (parametric)

Colored plates for Bergeron720's dishwasher sign . Supports single nozzle; no MMU required. Parametric. You need to download and print the base unit from Makerworld, then use this design for the insert plates. Customize You can customize…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
119
Rating
0
P
PrintablesWürth

Würth tool holder for the Würth perforated plate

Würth tool holder The Würth tool holder for the Würth perforated plate is designed for the 3 most commen used tools in 3d printing. Attach the tool holder next to your 3d printer and have allways all of your most important tool's next to…

Print approx. €7.66–€9.36 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
46
Rating
0
P
Printablesremotelove

Mini Y Plate Honeycomb Copy (R7+)

While this is built off of an original Prusa .stp file, credit goes here for the idea: Edit: Hmm.. It seems the honeycomb version is coming on the Mini+ now and it is injection molded? Oh well. To make it printable, I couldn't offset the…

Print approx. €12.97–€15.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
198
Likes
30
Rating
5
P
Printablesiqless

Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
29
Rating
5
P
Printablesthomers

Magazine Plate Large for Glock G20/G21

Use tough material if you plan to use the mags IPSC style. Also printing the magazine plates standing vertically on the build plate will increase their strength. For normal use, PETG will be sufficient.

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
186
Likes
20
Rating
0
P
PrintablesPoke2

Mounting plate for Nuki Keypad v2 screw montage

Nuki Keypad v2 only comes with a mounting plate with adhesive strips. But I would like to mount it on a wooden stand on which the paint is already peeling off. I think screwed is maybe better. For the print I chose PETG with 0.1mm layer…

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
18
Rating
5
P
PrintablesWally Salahoru

Licence Plate Holder (EU)

Slim Licence Plate Holder 2x pieces for one licence plate can be screwed or mounted with a double sided adhesive tape

Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
13
Rating
0
P
Printablesharbormaster

Circuitron Tortoise Turnout Motor Drilling Template

This is a template for easy drilling of Circuitron Tortoise Turnout Motor mounting holes. The Tortoise is a well regarded, slow motion turnout motor that provides reliable operation of model railroad turnouts. Use: Drill a 1/4” hole…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
12
Rating
5
P
PrintablesOpenscaddad

50's Geneva Steel Cabinet Pull Backing Plate

Geneva brand steel kitchen cabinets were popular in the 50's. They featured a low profile cabinet handle that required a recess behind the handle. This was made of plastic. Today, these cabinets are popular for retro style kitchens. The…

Print approx. €5.01–€6.13 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
6
Rating
0
P

Rails with Lego plate (wooden rails)

Compatible with Lego bricks and IKEA / Brio wooden tracks. 15 different versions with different lengths and widths.

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
40
Rating
5
P
PrintablespsychoD

Lego compatible 28x28 baseplate

Wanted to make some baseplates for my kids... used the scad model from https://www.thingiverse.com/thing:615256/files to get the size I wanted… Made the base a little thicker to stand up to the stresses of 2 toddlers(hopefully) Pieces fit…

Print approx. €11.10–€13.56 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
16
Rating
0
P
PrintablesMavis1975

anycubic cure and wash 3 plateau holder

this is for the anycubic wash and cure version 3

Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant

Downloads
158
Likes
20
Rating
5
P
PrintablesSTSUL.CZ

NBA plate for magnets or cakes

3D logo NBA, Bulls, Nets, Cobe 24, Durant 7, Irving 11, James 23, Jordan 23, basketball all in one or two or there colours, 3mf and gcode files are designed for PLA or PTEG, quality 0.3 or 0.2mm

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
8
Rating
5
P
Printablesltomicek

Beads bracelet plate/ pomůcka na výrobu náramků

This plate can you helps with preparation on beads bracelet Pomůcka na výrobu korálkových náramků

Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
53
Rating
5
P
Printablesasphaltbuffet

Gift box template for empty bathroom spools (aka toilet paper tubes)

Stop flushing your money down the drain for gift bags. Finally, a use for that cardboard tube when you've finished the paperwork after your porcelain cruise. Just a handy little template I came up with while farting around wrapping some…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
153
Rating
5
P
Printablescrashkg

Bandsaw Template Guide

I wanted a guide to help me use the bandsaw to cut out curves more accurately. Instead of following a line drawn on the wood I place a template on the surface, the guide follows that template exactly. This uses 1 Magswitch GripRight 90…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
147
Likes
57
Rating
5
P
PrintablesGaëtan

Base Plate for Bosh GKF 12V-8

This model is replacement base plate for Bosh GKF 12V-8 router (equivalent to ref 1 600 A00 N9C). It is designed to be as close as possible of the original base plate. Autodesk Fusion 360 file is provided if you want to make so…

Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant

Downloads
143
Likes
16
Rating
0
P
Printableskevsparky

Gridfinity Baseplate Tape Cutting Stencil

This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
69
Rating
4.67
P
Printablescrashkg

Barbell Router Template

As an alternative to bowtie or butterfly inlays I made this Barbell Router template. I included the inside of the inlays to layout the placement of the inlay. I sized the insides .1mm smaller for tolerance. Makes and Comments Appreciated!…

Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
36
Rating
0
P
PrintablesGizmo Gurus

DecoEdge: Switch & Outlet Combo Wall Plates

Overview Easily replace or upgrade your old or mismatched wall plates with these precise, 3D-printable combination covers , designed to fit standard electrical boxes. This collection includes 2-gang and 3-gang configurations for toggle…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
31
Rating
0

Rumble Plate Dice Roller

Create an inclusive gaming experience with the Rumble Plate Dice Roller. This switch activated dice roller utilizes a hobby motor, battery holder, Omron switch, and 3.5mm jack along with a couple of 3d printed parts and a clear plastic…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
33
Rating
5
P
PrintablesVenture_3D

1.5 inch Schedule 10 Cutout Template For 3-1 Merge

Print in PETG or PLA Different sizes included for different Schedule 10 manufacturer OD's Works well for fabrication of Manifolds or other 3 to 1 intersecting schedule 10 components Use 3D printed template to slide on pipe, and mark for…

Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
9
Rating
0
P
PrintablesDMTMKGWM

Welding Standard Template

A template for easily drawing welding symbols

Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
42
Rating
3
P
PrintablesRay Fox

Paper Plate Holder

Plastic holder to provide support for paper plates. Works great to lessen chance of paper plates collapsing and/or spilling. Requires large build plate like Prusa XL Can resize to fit dessert and other plates. Fusion360 files included to…

Print approx. €6.38–€7.80 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
10
Rating
5
P
Printableskubamxbot

Adapter plate for dashboard Ford Mondeo Mk3

Adapter plate for digital clock Ford Mondeo Mk3.

Print approx. €2.54–€3.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
116
Likes
5
Rating
0
P
PrintablesAlex_P

Indexing / dividing plate (Teilscheibe) for lathe Paulimot PM190-V or Optimum D180x300

The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
15
Rating
0
P
PrintablesMultiPrints

Drippy Display Shelf Mounting Template

The screw holes can easily be marked on the wall with, for example, a pencil. A level can be placed on the edge of the template or you can simply use your phone as a level

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
26
Rating
5
P
PrintablesMatt G

Mec-Gar P18 38S Base Plate Extension

I've always wanted base bigger base plates for my RIA 51679, but certain companies that provide them are wishy washy on if they will fit this particular magwell. Plus they are expensive. This one fits the magwell and adds no additional…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
5
Rating
0
P
PrintablesFamily3dPrint

Craftsman Router Base Plate Template Guide

Caution: Routers create large amounts of force. Use carefully and at your own risk. This is an alternate 6 inch base plate for a Craftsman Router with 3 screw holes. It was designed to replicate the metal guide bushings that can be…

Print approx. €6.46–€7.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
99
Likes
10
Rating
0
P
Printablescbearman

Ikea Lack Drill Template

If you are making an Ikea Lack enclosure (for example https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/ ), you might want to add a third lack table at the bottom to raise it up to a more useful height. There are a…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
23
Rating
4.5
P
PrintablesTol

Absolutely flat 40x70 cm plates for "Fast Operation Vise"

The main reason why I made these plates was to learn FreeCAD - I wanted to learn and make something useful at the same time! These plates compatible with: * Fast-Operation Vise by…

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
16
Rating
5
P
PrintablesDon English

LS3 Head Intake Port Block Off Plate

I was able to find block off plates for the exhaust ports and water pump ports, but not the intakes so I designed one!

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
7
Rating
5
P
Printablesperja12

Adapter plate for E27 bulb socket holder

Adapter plate that can be used with the E27 bulb socket holder from Clas Ohlson: https://www.clasohlson.com/no/Pæresokkel/p/32-3842 Dimensions of plate is approx 58 x 88 mm. Diameter 40 mm and screw holes 4 mm.

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
20
Rating
5
P
Printablescbutters

HYTE Y60 2 x 3 SLOT GPU adapter plate Remix

Like the original Hyte Y60 model, but good for 2 x 3 slot GPU.

Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
3
Rating
0
P
PrintablesTache

Gridfinity Porter Cable Router Template Guide Set Bin

A Gridfinity bin for the Porter Cable Router Template Guide Set. The set is the 42000, and each of the guides have the cooresponding ID etched into the hole. The gridfinity bin is 4x2. It is for the PORTER CABLE Router Template Guide Set…

Print approx. €11.01–€13.45 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
29
Rating
0
P
PrintablesOKButton

Erbauer ER2100 Router skid plate

This is a replacement plate for the bottom of the router. Can also be a starting point for other mods like a track sled for the router. I recommend printing in PETG for rigidity.

Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
86
Likes
5
Rating
5
P
PrintablesAinon3Dtisk

Prusa BED Holder PEI Plate

Good morning, Welcome to my profile, full of models and miniatures :-) I have for you a Prusa BED Holder PEI Plate / textured. Suitable for example for dripping when cleaning the bed pad with a jar and isopropyl. Can fit 3 pads like…

Print approx. €6.72–€8.21 excl. taxPreliminary estimate for one variant

Downloads
84
Likes
8
Rating
2
P
PrintablesHarms3D

DinA5 Lineal 55Grad Template for Calligraphy Copperplate Anglaise

I designed this template for my mother, who had previously made the template out of cardboard. "Marketing on" You love calligraphy and want to bring your penmanship to a new level? Then this DIN A5 stencil is just right for you! This…

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
21
Rating
0
P
Printablesdjedje_zr7

Schneider Wall plate (unica)

Gently remove the brackets. You can use a cutter to cut them.

Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
7
Rating
0

ميدالية لوحة سيارات قطر / Qatar car plate Keychain

ميدالية على شكل لوحة السيارات في قطر ، نزل الملف وضيف عليه الرقم الي تبيه ! Keychain that looks like Qatar car plate , download the file and add your car number! Category: Keychains

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
12
Rating
0
P
Printablesbrio

Hardinge Dividing/Indexing Head Plates

Background I picked up a Hardinge dividing head and it only came with one dividing head plate. To get other divisions I modeled four of them based on the factory indexing hole count specifications and measurements from my single dividing…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
9
Rating
0
P
PrintablesAsus1357

Mini Cooper S license plate frame (north america)

I figured out a bit more on how to model with the 5 head XL. I also wanted to use the Cooper S name model to the plate. .6 nozzle .25 resolution Petg no supports

Print approx. €2.58–€3.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
77
Likes
9
Rating
0
P
Printablesericvenneker

Festool TS60 Arbor plate

Small plate to close the arbor hole on the Festool TS60

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
14
Rating
5
P
PrintablesAndrew

Bino Plate added V5

This is a simple plate that attaches to a tripod using a cheap 50mm Arca rail. I spaced the outer holes to fit a set of Bushnell Forge 15x56 binoculars. The center hole is a ¼” countersunk to attach the rail. I use the “Armageddon Gear”…

Print approx. €6.40–€7.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
7
Rating
0
P
PrintablesJadozub

Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix

This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
6
Rating
0
P
PrintablesT3D_design

custom Licence Plate RTX 3000 Series

model slouží pouze jako dokorace, nikoliv jako nahrada za poznavací značky. filament: prusament galaxy black https://www.prusa3d.com/cs/produkt/prusament-petg-prusa-galaxy-black-1kg prusament signal white…

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
7
Rating
0
P
Printableshjembaek

Jabra Evolve 65e Buttonplate

Credit: Thanks to Lorenzo (@laurent.polese) from MakerWorld for sharing the original design. Modifications made to the original: Printed using a 0.25 mm nozzle for higher detail Buttons scaled to 92% on X and Y axes Buttons scaled to…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
72
Likes
1
Rating
0
P
PrintablesRob

Benjamin Franklin Clock with backing plate, different bob and pennyweight

This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
12
Rating
0
P
PrintablesSYNCPRINTING

Full size Drum Kit: NamePlate Mod

Hello!! Here I have made a mod for my drum kit that allows you to add a customisable Name Plate to the “Rack Tom 1”, "Rack Tom 2" and the “Floor Tom 1” of my full size drum kit, this is a very easy mod that makes the kit pop with…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
28
Rating
0
P
PrintablesAunyx

Joyeux Anniversaire plate

“Joyeux Anniversaire” means “ Happy Birthday”. The plate have holes to attach it to a gift ribbon. Text and background have different heights in order to easily use 2 colors on any 3D printer. To use 2 colors, add a pause and color change…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
1
Rating
0
P
PrintablesKubiV

V-lock Plate

Plate for Backpack Clip Quick Release V-Lock Backpack Clip Quick Release V-Lock Plate Waist Belt Clip Shoulder Strap Clamp: https://www.aliexpress.com/item/1005004896359951.html?spm=a2g0o.order_list.order_list_main.248.3d5d1802P4tckJ

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
9
Rating
4
P

Nameplate for T-Rex Skull

A flattened name plate.

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
12
Rating
0
P
PrintablesFox Hunter 12

Extruder Rotations Template/Gantry Neptune 4

I build this gantry to check the righ Extruder Rotation in your printer

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
65
Likes
11
Rating
5
P
PrintablesDZ

Frosthaven Character AoE (Area of Effect) Templates (All Character Remix)

This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
6
Rating
0
P
PrintablesVeryGeneric

(kill)dozer license plate frame

remix of blank license plate frame design in a way that would make Marv proud.

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
20
Rating
0
P
Printablesjoka67

IKEA Tretur blackout shade, End Plate

The original part broke so I needed to replace it. Could not find a spare part so I made one myself. Printed with PLA.

Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
1
Rating
0
P
PrintablesOpari3D

Piano Keyboard Template

Simple plantilla para piano o teclado para poder apuntar melodias cuando lo necesites , se a impreso en PLA Winkle negro , disfrute imprimiendolo y modificandolo a su gusto . Simple template for piano or keyboard to be able to write down…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
24
Rating
5
P
PrintablesBeckTuning

Ridge Wallet Plate (Glock Theme)

After downloading several ridge plates and finding that the screws dont lineup or the finger hole is not the right shape I decided to take a crack at making my own. This one is Glock themed printed in PETG with the MMU3 make sure to put…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
21
Rating
0