Counting matching models…
This is a simple 3d printed pen plotter that broadcasts a wifi network with web server that fully houses the whole interface. So anyone with wifi and web browser can use the device. The plotter runs custom firmware on an ESP32 and serves…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
UPDATE17.01.2022 Found another Template including front, back and top. Its only a PDF so its not simply ready to print or cut out, but I thought I add it as it could be useful to some of you. !!WARNING!! if you plan to do this with a…
This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…
This allows you to attach a pen to your ender 3 S1 extruder. This enables you to let the printer write or even "draw" on a piece of paper. 2xM3 screws are used clamp the pen down This project works with any pen with a diameter smaller…
Introduction This is an updated version of my ExtruDraw plotter. If you have already built an ExtruDraw some of the hardware is compatible but there isn't a huge difference between them so you may not find this a big upgrade and it might…
print time: 40min print settings: 0,28mm SUPERDRAFT cost: 1,7m supports: needed infill: 15% bolt: M3x16 (2x) nut: M3x2 (2x)
Always make sure you are using high quality eye protection and ventilation while working with lasers. Eye protection is very important! https://github.com/Adamslab/SimpleEngraver This is a 3D printable frame for a simple 2-axis laser…
pltr V2 Toolhead A 3D Printable Pen Plotter Toolhead for the Creality Ender 3 3D Printer Download the calibration prints and user guide on GitHub: https://github.com/AndrewSink/pltr_toolhead Originally launched as a product on Tindie ,…
Inspired by this Teaching Tech Video I wanted to create a light weight pen holder to avoid putting too much stress on the cantilever print head of the Prusa Mini Materials Requires 4 M3x8 bolts, 2 to hold the mount to the print head…
Materials 2x M3x6mm screw 2x M3x12mm screw Settings: PLA 0.2 layer height 10% infill If you like this model check out my other mods for Ender 3 v3 SE: light mount for ender 3 V3 SE Shroud for fan 4010 adapter fan (soon) Also consider to…
Our Github - updated files and firmware Our Website - Store and general info about us and our goals. ---------------------------------------------------------------------------------------------------------------- During this quarantine…
I designed this to attach to my Ender 3 fan shroud. Required Items: 1: Standard Bic ball point pen or your color choice. Make sure it's 8mm in diameter. 2: 3\8'' ID x 3\4'' compression spring ( Lowes, Ace hardware, Harbor Freight (200pc…
The screw used in the picture is a 30mm m5
My 3mm Rods did not fit right so I made the holes a bit bigger. I also combined the motor connector to the carriage so you don't need extra work for yourself. Print instructions Resolution: 0.2mm Infill: 20%
We had an issue were purchasing bought the 3 inch inner diameter roll of plotter paper for our large format HP Designjet 800PS which takes a nominal 2 inch diameter roll. We could not return the paper of course because we were on a time…
A mount for a pen plotter for the MK3s. Designed to snugly cover the Extruder motor, and can hold a pen of diameter up to 12mm. Will take 2x M3 Bolts/Square Nuts to lock the pen in place, and 2x M3 bolts/square nuts to hold the cover to…
Here is the Prusa Mini Plotter Add-on V2!!! For all those times when you need to draw but you can't. Good thing you bought that 3D printer. You can stop the 3DBenchy production live to write a card to all those people who told you you'd…
This is a attachment that that turns your Prusa MK4 into a pen plotter. It clips on to the hotend fan and requires no disassembly of the printer toolhead. It's fairly rigid and can plot fine details (e.g. printed text) with a fine tip…
I created this file so that I could mount a pen to the extruder motor of my MK3S. It simply slides onto the motor. The pen is attached with rubber bands in the provided slots so that it can slide up and down to account for slight bed…
WORK in progress Material/Bom: Stift/Pen 7 v rollers 20x20 Aluminiumprofil 5x drawing area in x +90mm in y + 110mm v roller 4mm oder 3 mm hole 8x einschmelz dinger/heat inserts m3 oder m4 +m5 mgn 7 h linearschiene 100mm Angelschnur mit…
Projekt elementów konstrukcji lekkiego plotera CNC pod laser SculfanS9. Wydruk ośmiu elementów pozwoli połączyć cztery profile np. V-slot 2020 w ramę, oraz na piątym profilu trzeci wózek liniowy pozwoli zamontować laser w tym przypadku…
Vertical plotter from HackSpace mag issue 55. See hsmag.cc for details. The motor mounts and pulleys are copyright Ben Everard and shared under CC-BY-SA. The Gondala is copyright thingiverse user Rincey12 and shared under CC-BY-SA (full…
https://www.youtube.com/watch?v=X2tqQK2OvdU https://www.youtube.com/shorts/V2qCze-AqyI https://www.youtube.com/watch?v=XT-UFziRYgA&t=1s
Made for this frame. CoreXY Frame (v.2.0) by Lehaiver - Thingiverse You will need to take apart two CD Drives for the linear rail which the pen plotter slides on. Uses pancake motor and m3 screws. Rests on MGN12H rail block. Mine took…
This project is abandoned. A small attachment that mounts using the two screws on the right side of the print head, for putting a pen in. I recommend the use of fineliners, as they draw easier. Minor config editing is required, thus you…
Note - I have not printed this with the new Arachne perimeter generator. If you do come across tolerance issues print the main parts with the classic settings. This isn't quite a remix but a slight design change. I originally used Reven's…
12/28/2020 Update: I added the file RP_200411_Servo_Z_Dual_X.cfg * that has my klipper configuration using the servo for the Z-axis for reference. Z-axis servo/Stepper motor Pen Plotter mount for V-Slot I needed a pen mount for the…
UPDATE: the new 2.0 model needs to be printed with supports, but it is worth it due to the highly improved stability, drawing quality and 2 point mounting for pen, no wigling, no detail loss!!! (it can also work with a blowerfan duct)…
Yet another sprite extruder pen plotter attachment
This model is designed to be mounted on the ender 3 hotend carriage with the screws that hold the hotend cover. Then you can use your printer as a plotter with a pen (I used a 4 colours bic pen) or a marker. I also used a small clip to…
This is a custom pen holder head designed to replace the standard extruder of the Easythreed K10, transforming it into a cute and functional pen plotter! Whether you're plotting art, drawing text, or just having fun with gcode-controlled…
This pen plotter addon to the Creality Ender 3 v2 consists of a bracket that bolts onto the existing M3 threaded holes on the hot end bracket for mounting the BLtouch sensor and a pen holder that uses a 3d printed M6 screw to hold the pen…
Una semplicissima cnc da costruire! può disegnare, dipingere, tagliare carta, vinile adesivo, vinile termoadesivo, Occorrenti: 4 barre rettificate diametro 8mm lunghezza a piacimento, io le ho fatte da 510mm 2 barre rettificate diametro…
This Thing began as an effort to build a small, cheap CNC machine. I mainly wanted to gain some experience with the electronics and control software without spending several hundred dollars on components. For control it uses clones of an…
This is a collet type holding mechanism for pens of 8 to 10 mm diameters that I designed to use on a CNC Plotter. The collet is symmetric across the x axis to reduce uneven stress that would cause the thin cross sections from delaminating…
I stumbled across this design and thoght it might be useful. Comparable to models that can be found on Amazon , but i mean, we really want to print it.
I have long been enamored with the idea of blowing the minds of my nieces, nephews, and in-laws with robot produced Easter Eggs from an EggBot-type device. Opportunity to make one of these semi-spheroid plotting devices from scratch fell…
A plotter/drawing machine that uses 20x40mm and 20x20mm aluminium extrusion for both structure and linear guides. Note : I've kept this model up in case it's useful for anyone but if you think you want to make a plotter like this I have a…
This is just a different approach to a Gondola for a Polargraph robot. My main goal was to get the pen up and down to a smooth linear motion and make it easy to change colors. You need: 2 x 6806-2RS Bearrings (30x42x7mm) 1 x mg90 servo…
Features: Easy to calibrate pen alignment and depth. Multicolors. Can be added/removed to the existing extruder easily. Uses magnets (8x2mm) instead of an elastic to push the pen onto the bed. Uses M4 screws and hexagon nuts. Should be…
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case. I remixed the stl on Sketchup,…
M3x12 bolt Radius : 1.5mm Pen Radius : 6mm Pinda Sensor Radius :3.35
Fast Mount design This is a plotter adaptor for the Ender 3 V2 Neo, but it will work with most Cr Touch printers. I recommend you to print the parts exactly as shown in the print preview photo, with organic/tree supports (I used the…
Want a permanent solution to hold the pen in place to convert your 3d printer into a drawing machine? You have come to the right place! Using this custom design you can just snap this into your printer and you are all good to go.…
I wanted to draw with my 3d printer because i suck at drawing, so i designed this pen plotter for the neptune 4 and neptune 4 pro (potentially the neptune 4 plus and max aswell havent tested it tho) for assembly you need: 4x 5x5…
Parts to upgrade/modify a plotter/cnc frame kit Frame Corners for frame Endstops Holder for cable rail Z-Axis Stepper Motor Mount Stepper motor mount for Z-Axis Tool Mount A remix of the Quick tool change for Creality CR-10 / Ender series…
Extension of the milling machine for cutting foils There are 3 versions available One suitable for the 3018 CNC series and one for use of 500W spindle motors with a diameter of 55mm. Now a long version is also available when the Z-axis is…
2 Nema17 motors 8 mm threaded rods, axles and ball bearings 3 mm screwings of the motors etc. Arduino Nano and CNC Shielt V4 A4988 stepper motor driver Arduino Micro to control the SG90 Micro Servo Software Grbl 1.1 Lightburn Software to…
Links to materials: Miniature Ball Bearings 693ZZ Screw M3-10mm,16mm, 30mm Cutting Plotter Cutting Plotter Carbide Pipe 8mm Aluminum Pipe out Diameter 8mm TPU Plastic Links to used tools: 6PCS M3-M10 Screw Tap Drill Bits HSS Pump Liquid…
Hi! I created mount for pen to attach to Ender 3v2 with cr touch so i could easly turn printer into pen plotter works great for me and I hope someone will like it too. To use it i slide pen a little lower than nozzle and set z-offset. To…
I’ve designed a little pen-plotter with the goal to create a plotter that consist mostly of 3d-printed parts, is cheap to build and foldable for storage. The plotsize is about 12cm x 12 cm See it in action!…
This adapter allows using Sakura Pigma Micron pens in e.g. Hewlett-Packard pen plotters.
This holder is an exact match to the original. It is compatible with HP DesignJet T1300 plotters.
There are many pen plotter conversion mods for 3D printers around. Most of them hold the pen perpendicular to the paper, which is suitable for ballpoint or felt tip pens. Fountain pens need to be held at an angle, which this device does.…
A simple model to hold a "Bic Round Stic" pen onto the Ender 3 V2. The fit is pretty tight so I used a rubber mallet to get the pen piece to fit in the hole. You will need two m3 screws, probably 8-12 mm. Print Settings: Rafts: Doesn't…
2x M3 4 bolts for mounting 1x M3 12 or 8 bolt for securing a pen 1x M3 nut (optional) for securing a pen
Printed with PLA Plus at 220 °C with 0.28 mm layer height. no support needed 😎 needed: M3 insert nut M3 screw
Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.3 mm Infill: 20 % [CZ] Vylepšení které vám umožní používat vaší tiskárnu ke psaní a malování. K sestavení potřebujete dvě gumičky a propisku nebo fix [EN] Enhancement that allow you…
The Walldrawer project is a usual maker project which is suitable for old and young. There is so much fun in watching it working on giant sheets, walls or whiteboards. I modified usual constructions, now everybody can build one on a 3D…
Print hints: PLA 0.2mm layer 0.4mm nozzle Print the toolhead a little rotated and with support for more stiffness (see gcode example). Assembly: Print all parts. Print the pen clip twice :) Use M3x6 screws to mount the rail on the…
Remixed from 3D printer multi-function/ Imprimante 3d Multi-fonction by HelioxLab Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Category: 3D Printer Parts
I found that the mount by Fizzy Chickens needed a little more material around the back of the screw hole. The bolt that came with my printer was bottoming out so I added a small collar around the hole too. Deleted the extra bit opposite…
This is an openSCAD model and STL file of an old timey plotter pen, used in the land before wide-format inkjet printers. I took measurements of a random sampling of three different pen brands and formats. I'm sure the resulting model…
Print details: I orient the model such that the pen hole is vertical and the numbers are towards the bottom. Printed with PLA, 0.2mm, 2 walls, and 15% grid infill - takes approximately 70 min and 29g of filament I used supports to ensure…
Print both parts. Print in PLA or PETG. PETG is the better option. If you print in PLA use high printing temperature for better layer adhesion. Lower part needs supports. You can also paint the parts for better UV protection.
This is a simple penholder for your Prusa i3 mk2s printer. It will convert it into a fully functional Pen plotter without disassembling anything. The Slic3r settings are given. (See the PenPloter_Slic3r_Config.ini and config_Bundle files)…
CR-10 V2 / V3 Pen plotter attachment. Remixed from my universal mount that clips onto the face of any stock CR-10 V2 / V3 it comes on and off in seconds, ideal for a pen plotter the pen is secured with a M3 screw and bolt the plotter is…
A pen holder attachment for the Creality Ender 3 that allows it to function as a plotter. Includes an adjustment screw to accommodate various pen diameters (8-13mm). Model can be installed as-is, no additional fasteners or springs…
Checkout my improved solution! Features No additional hardware needed A G2 pen and filament are all you need. Install and forget Flexibly switch between plotting and 3D printing without removal of the attachment. Tool free design Slide in…
Plotter add-on for the Prusa mini, remixed to hold pens of multiple sizes.
The 3D printed CNC Plotter Penholder is a specialized attachment designed to convert a CNC machine into an accurate plotting device. It mounts onto a 62mm spindle motor (2.2kW) and accommodates a standard ballpoint pen mine. The penholder…
Hier habe ich ein Bauteil entworfen, dass man den Müll von der Nadel beim Entfernen der Folie usw vom Plottern einfach entfernen kann. Gedruckt habe ich das Bauteil selber mit einem Flex Filament. Layerhöhe: 0,4mm Düse: 0,6 Support: Ja…
Details about the project can be found at: https://www.instructables.com/CNC-3018-Cutting-Plotter-with-Workflow/
The Pen Plotter is designed for a BIC pen like you see in the pictures. To attach the Pen Plotter you have to get rid of the print head housing by using the Blower fan quick release by DrewDeeDoo . Use the screw holes designated for the…
This pen plotter allows you to leave a base attached to the printer at all times, then when you're ready to use it as a plotter you can just pop in the pen-module of your choice. You can print multiple holders for quick swapping. Features…
This model has the exact dimensions of the original HP plotter pens, which fit into the pen carousel.
This project is an upgraded version of an Arduino-based mini drawing machine inspired by the original open-source design from Thingiverse (Thing:4607077). I started by printing and assembling the base parts, and then redesigned the key…
Slip this on a Sharpie Fine Point pen (aka: a "normal" Sharpie) to use it in a standard pen plotter. Note that regular Sharpies are too long to fit in a carousel-style pen holder. I'll look into updating this for mini-Sharpies eventually.…
Print settings: Set flow to 105 on first layer, then back to 100 or 95 afterwards. Circular feet on outer corners, 2x layer height. .20mm quality recommended for fit.
I used the idea of the dovetail rails and designed a low profile holder that does not impede normal printing. I use this in conjunction with a python script I wrote as a school project that turns SVG files into GCODE but you can just…
This is a simple modification for the SV06 that allows you to use your 3d printer as a pen plotter. I loved seeing others make modifications and extensions to their printers, but hadn't come across a model that could be used with the…
Update 6/19/2020 I am currently redesigning the wheels & Wheel plate and adding spacers between bearings on the wheels. Also the bearing count will be 8 instead of 16 bearings since learning they are not necessary for the Wheel Plate. The…
WARNING since last update X1 will heat up if there is a M3 command at the start of the G-code Who never thought: what if my 3D printer was a 2D printer ? All you need is a M6*40 bolt and a nut to go with it, simply put the nut in the…
I've seen other pen holders and I didn't like the spring mechanisms that presses the pen down to the drawing area. (rubber bands, spring in the pen, …) My holder uses meander springs that are printed with the part. This spring can be…
Warning: This tool requires the user to interact with the printer extruder while printer is running and the user does so at their own risk. Precautions have been taken but the risk is never zero. Warning: Failing to follow instructions as…
Pen plotter for your H2, just mount it using two M3x6 screws directly onto the H2, insert a pen and add a rubber band. You will need to adjust the z-offset for every pen you use. Printed with PLA+ No supports. I recommend using a brim to…
Want to turn your 3D printer into a 2D printer? This detachable pen holder allows you to use almost any 3D printer as a pen plotter. It's compatible with Three Ducks in a Bear Suit's Prusa Mini Pen Plotter design and should attach to any…
this work in progress is a mix of https://www.thingiverse.com/thing:4559133 and https://www.thingiverse.com/thing:4545252 as I have the bl-touch original plate installed so I had to adapt the pen holder Print Settings Printer Brand:…
Pen plotter for Kingroon KLP1 New 2025 W.I.P. Pen plotter for klp1 210 https://www.printables.com/model/1354295-klp1-210-pen-plotter-revamped-wip Can fit any printer with 3010 fan close to the extruder! Tutorial inside the zip file!
This is an adjustable pen/pencil/marker holder for the XRP Robotics Kit! It uses an adjustable mounting mechanism for holding different sized pens and also allows for quickly swapping between them. It's also compatible with the ultrasonic…
If you are looking for a plotter with repeatable accuracy, this is not it. I was never able to get the accuracy I wanted with this machine, but was a fun project to play with. UPDATE 3/29/2023 There are 3 Assembly videos for this machine…
After reading this tutorial https://urish.medium.com/how-to-turn-your-3d-printer-into-a-plotter-in-one-hour-d6fe14559f1a and as I did not have M screws or any other hardware at hand, I tried a simple holder based on some light compliance…
This is a 3D printed version of the “Brachiograph” from German Make magazine: Make based on Daniel Procidas Blog Code on Github The project did not work with raspberry 4 - so its on a raspi3. You need 3 SG90 9g Microservos Amazon
A mount that I designed for my Anycubic Kobra Neo in order to mount a pen to it so I could use it to draw.
I have modified the movement system from itsaMeWolf's design with a higher focus on eliminating play between parts. The dove tail is now designed to be printed in the horizontal plane and should made with ironing enabled (see 3mf and…
Those are two differents versions of an adaptor that turns your Roland vinyl cutter into a neat drawing machine ! The file named “Bic adaptor for Roland Camm 1 pro.stl” is made to hold any classic bic pen cartridge The file named…
Plug and play upgrade Need: some screws and nuts (M3) 4020 radial fan original extruder and motor from original printer
