Search results: prin

Sort order

48,375 models

P
Printablessoozafone

DUMMY 13 Printable Jointed Figure (BETA FILES)

HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…

Downloads
225,228
Likes
23,715
Rating
4.91
P
PrintablesHugo

Cascade card wallet (Print-in-place)

New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…

Downloads
142,882
Likes
27,841
Rating
4.68
P
Printablessoozafone

LUCKY 13 Printable Jointed Figure

Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…

Downloads
137,331
Likes
20,440
Rating
4.92
P
PrintablesPrusa Research

i3 MK3S+ printable parts

All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…

Downloads
125,427
Likes
5,185
Rating
4.95

Collapsing Katana V2 (Print-in-Place)

This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
90,094
Likes
8,637
Rating
4.6
P
Printablessoozafone

MINI 13 Printable Jointed Figure

Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…

Downloads
74,985
Likes
10,939
Rating
4.86
P
Printables3D_Flexseeds

Flexi Holding Cat (Print-in-place)

Official Remix "Extra Size Cat" is released!! https://www.printables.com/model/1146999-official-remix-flexi-extra-size-cat-print-in-place Since there were many requests for longer cat, I decided to release it as an Official Remix. This…

Downloads
58,995
Likes
7,582
Rating
4.96
P
Printablesrobotfriend

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

Downloads
52,246
Likes
8,823
Rating
4.59
P
PrintablesNight Raid
18+

The source marked this model as adult content.

Downloads
49,247
Likes
12,541
Rating
4.75
P
PrintablesLR3DUK

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Downloads
48,028
Likes
19,528
Rating
4.83
P
PrintablesPrusa Research

MK4/MK3.9 printable parts

All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…

Downloads
45,508
Likes
2,670
Rating
4.88
P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…

Downloads
42,152
Likes
8,919
Rating
4.87
P
PrintablesPrusa Research

MMU3 printable parts

All printable parts for your Original Prusa MMU3. Before you start printing please read the instructions carefully. Depending on the option selected, you either receive all printed parts from Prusa or you have to print them yourself.…

Downloads
40,236
Likes
3,082
Rating
4.83
P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Downloads
39,451
Likes
3,967
Rating
4.78
P
PrintablesPopandsicle

Christmas Tree Ornament Set (Vase Mode Prints)

A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…

Downloads
39,379
Likes
10,633
Rating
4.94
P
Printablessoozafone

CARBON 13 Printable Jointed Figure - Type M - Beta files

About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…

Downloads
36,410
Likes
5,101
Rating
4.77
P
Printablessoozafone

EASY 13 Printable Jointed Figure

Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…

Downloads
28,715
Likes
4,670
Rating
4.86

COLLAPSING DAGGER (PRINT IN PLACE)

This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Downloads
24,945
Likes
4,160
Rating
4.68
P
Printablescodewarriorr

Toothbrush Travel Case print in place

Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…

Downloads
24,415
Likes
6,508
Rating
4.9

Crossbow Kit Card (fully printed)

It's a fully printed, pocket size crossbow Have fun! don't hurt anyone How to make it print the file kitcard_crossbow.stl seperate all the parts (maybe using a small wire cutter) take the part with the R and put the pins in connect the…

Downloads
24,301
Likes
5,681
Rating
4.7
P
PrintablesHD_Creator

Miniature Vise 2.0 (much easier to assemble and 100% printable)

History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…

Downloads
24,102
Likes
4,212
Rating
4.85
P
Printablesstevenmarx

How to print the Mandalorian helmet -> size S, M, L and 3D print settings

Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…

Downloads
23,954
Likes
4,219
Rating
4.91
P
PrintablesNat

A *slightly* Overengineered Olpe Vase (print in vase mode!)

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

Downloads
23,942
Likes
5,722
Rating
4.95
P
PrintablesCreative Tools

#3DBenchy – The jolly 3D printing torture-test by creativetools.se

As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…

Downloads
23,582
Likes
846
Rating
4.97

FlexiDinos Günther the flexi Stegosaurus print in place articulated dinosaur

Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…

Downloads
23,486
Likes
4,917
Rating
4.97
P
Printablesneoyarus

Print-in-Place Bag Clip

I made a new version with a stronger hinge and parametric source files. Check it out! Origin story I needed a bag clip for my cat food but couldn't find one that would last more than a week. The problem was that the existing ones had some…

Downloads
22,463
Likes
5,902
Rating
4.79
P
PrintablesPrusa Research

Prusa Spatula Printables - sample model

Author: Prusa Research (Vlado Turek)

Downloads
22,450
Likes
2,607
Rating
4.91
P
Printablesprntmkr

Super Mini whistle! Only 5min print time!

Intro A super-mini but surprisingly loud whistle for your keyring! Print a few of them and give them to your friends as emergency whistle . ❤ Only 5min print time with Prusa MK4/MK4s or Core One (other printers maybe take longer time)…

Downloads
22,102
Likes
3,012
Rating
4.8
P
PrintablesExtrutim

Filament Sample Box | Infill / Color Swatch | Fully Printable

Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…

Downloads
21,342
Likes
9,114
Rating
4.91
P
PrintablesPrusa Research

XL printable parts

All printable parts for your Original Prusa XL . The parts are divided into folders based on subassemblies. Print instructions ATTENTION: Two materials (PETG and Polycarbonate) are recommended for the printable parts. Read the following…

Downloads
21,307
Likes
1,173
Rating
4.94
P
PrintablesPrusa Research

Enclosure Printable Parts

All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…

Downloads
21,101
Likes
1,611
Rating
4.85
P
Printablessoozafone

CARBON 13 Printable Jointed Figure - Type F - Beta files

About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…

Downloads
20,097
Likes
3,272
Rating
4.85
P
PrintablesLinkDesigns

Finger Slinger - Print In Place Spinning Fidget

Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…

Downloads
16,936
Likes
2,974
Rating
4.72

Wallet (V4) - print in place

Updated Version available (V5): https://www.printables.com/model/1034340-slim-wallet-v5-print-in-place ------------------------------------------------------------------------- A print-in-place slim wallet that offers space for 7 cards…

Downloads
16,547
Likes
3,636
Rating
4.52
P
PrintablesVC Design

Hinge Print In Place - Parametric

Print orientation: flat

Downloads
15,940
Likes
2,820
Rating
4.84
P
PrintablesAnimeted

Mini Disc Shooter (Print in Place)

**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out. It's been added back…

Downloads
15,901
Likes
2,550
Rating
4.89
P
Printableskenny

Pop-Up Wallet (Print-in-Place)

A slim and compact wallet designed to hold five standard sized credit cards. Press the lever to have your cards presented to you in a convenient stacked order. The built in retention mechanism keeps your cards secure. Only 8.5mm thick!…

Downloads
15,454
Likes
2,895
Rating
4.63
P
Printableswuguigui

Foldable Hanger - print all at once

Now you can buy a printed one at: https://trajann.com/collections/fandesign with special Black Friday discount code"BF25OFF" Updated20231109 Someone suggested designing a new one for the baby, so I made a new one, just scale the length,…

Downloads
15,247
Likes
5,387
Rating
4.78
P
PrintablesDelphant

Articulated Minecraft Creeper: Print-In-Place

Articulated Minecraft Creeper: Print-In-Place From the best-selling video game Minecraft. Print-In-Place and fully articulated. Optional face pieces included. Designed in Fusion 360. UPDATE 3/28/2024: Fixed model orientation. Made Head…

Downloads
14,623
Likes
1,806
Rating
4.84
P
PrintablesProfessorBoots

3D Printed RC SkidSteer V3.0

Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…

Downloads
14,102
Likes
3,135
Rating
4.92
P
Printablesprntmkr

XXXS Whistle - small but loud - 4min print

Intro XXXS super-mini emergency whistle for your keyring! Only 32mm in size. Only 4min print time. SMALL but LOUD! Print a few of them and give them to your friends as emergency whistle. Why you'll love it? Very small - only 32mm Quick…

Downloads
11,670
Likes
1,325
Rating
4.74
P
Printablessoozafone

Grabby the Claw - a quick calibration test for 3D printed action figures!

Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…

Downloads
11,095
Likes
2,415
Rating
4.94

Drybox for Prusa Printer Enclosure V2 - without humidity sensor

This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…

Downloads
10,924
Likes
983
Rating
4.64
P
PrintablesGLeZz

3D Printed "Smart" Wallet (Updated for M3 Bolts)

/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version. =============================================== 9/2/22 Added VORON Edition top and bottom.…

Downloads
10,839
Likes
2,091
Rating
4.67
P
PrintablesPrusa Research

MK3.5(S) printable parts

All printable parts for your Original Prusa MK3.5(S). MK3.5(S) upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK3.5 assembly manual Original…

Downloads
10,158
Likes
385
Rating
4.87
P
PrintablesNeybao

Gyro 7 Printable Jointed Cat

The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…

Downloads
9,892
Likes
3,785
Rating
4.82
P
PrintablesMetikumi

Stackable Storage Boxes Optimized for 3D Print

This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…

Downloads
9,645
Likes
2,151
Rating
4.93
P
Printablesfifindr

Fidget Toggle Switch Clicker - Print in Place

Each variant is optimized with dedicated print profiles to suit different filament types: Basic filament for standard materials. (PLA Basic) Matte and silk filament to accommodate the increased friction of these materials, ensuring smooth…

Downloads
8,920
Likes
811
Rating
4.35
P
PrintablesProfessorBoots

3D Printed RC Forklift - DIY

Have you ever wanted to obtain the highest level of achievement known to man also known as being “Forklift Certified”? Well this RC forklift is meant to help make that dream a reality. This Mini-Fork is front wheel driven with rear wheel…

Downloads
8,484
Likes
1,793
Rating
5
P
PrintablesUnkown

Print-In-Place Beginners Dice Case

I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…

Downloads
8,180
Likes
3,117
Rating
4.74
P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Downloads
7,422
Likes
1,358
Rating
4.83

"Cable puck" print-in-place cable management

Fully print-in-place cable management winder for usb/headphones etc.....

Downloads
7,326
Likes
1,410
Rating
4.63
P
PrintablesJamesThePrinter

Chain Link Fidget (Print-In-Place)

Print-in-place chain link fidget toy - available in 4 sizes . Small (8 Links) - Ideal for one-handed use Medium (12 Links) - Good middle ground, useable in one or two hands (Recommended) Large (16 Links) - Great for use with two hands XL…

Downloads
7,268
Likes
1,365
Rating
4.83

Gear fidget ring print in place

Relaxation ring with a gear wheel, print in place If the ring is difficult to fit, run it under water, push it to twist in all directions, it helped me a lot In g-code, a collar is set around so that the model does not come off - I…

Downloads
6,276
Likes
814
Rating
4.78
P
PrintablesHellweaver666

KeyCrappie - The print your own Romley KeyCappie fidget toy clone (aka cute key cap guy)

I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…

Downloads
6,082
Likes
1,146
Rating
4.86
P
PrintablesMateusz Tokarz

Hex-Grip Bed Scraper – Print Removal Tool

🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…

Downloads
6,025
Likes
792
Rating
4.81
P
PrintablesDaniel Ryan

Fully 3D Printed Heat Set Press

*Update Nov 16, 2024: Many asked for a handle design with angled spokes like on a drill press, so I have now added a modified handle design (v4.2) that accepts threaded rods angled at 25 degrees. There are also threaded rods, and rod…

Downloads
5,748
Likes
1,823
Rating
4.55
P
Printableskaje

Slug - fully articulated Print-in-Place

As noted in the Summary, this is a print of a design by Isaiah Steckling from here: https://www.thingiverse.com/thing:4727448 The design is very clever, but it is difficult to print correctly as the clearances are very small. Essentially…

Downloads
5,664
Likes
621
Rating
4.9
P
Printables3D_Flexseeds

Flexi Plesiosaurus(print-in-placeiosaurus)

This is a Flexi Plesiosaurus. There are two types: star pattern and blank. You can 3D print whichever you like. Print in Place with no supports. Please take pictures of your Flexi and share them with us! Print Settings Printer Brand: QIDI…

Downloads
5,503
Likes
882
Rating
5
P
Printables3D KIMBA

Pocket Tic Tac Toe: Fold & Play Anytime, Anywhere - Print in Place

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Downloads
5,474
Likes
1,579
Rating
4.87
P
Printables3D_Flexseeds

Flexi Hammerhead Shark(print-in-place)

[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…

Downloads
5,163
Likes
648
Rating
4.97
P
PrintablesY Ibrahim

The Prusa Mouth Organ - A printable harmonica w/ Carry Case

Overview A fully printable, fully functional printable harmonica in a simple 3-piece form factor that clips together - no fasteners needed! The design features swappable reed plates which set the playable notes. The attached reed plate…

Downloads
5,156
Likes
981
Rating
3.83
P
Printablesrobotfriend

F23 ultralight glider Print in Place

A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…

Downloads
4,996
Likes
574
Rating
4.8
P
PrintablesNight Raid
18+

The source marked this model as adult content.

Downloads
4,937
Likes
1,085
Rating
4.88
P
PrintablesFlameKitty

Flexi Ankylosaurus - Print in Place

This is a really simple print. It requires no supports and it is print in place. This print takes about 3 hours to print. This model was designed and sculpted in Blender. It was my first time making something in Blender for 3d printing.

Downloads
4,755
Likes
1,032
Rating
4.8
P
PrintablesJoe

Print-in-place Automatic Rope Tensioner

Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…

Downloads
4,449
Likes
588
Rating
4.78
P
PrintablesDelphant

TARS- Interstellar: Print-In-Place

TARS- Interstellar: Print-in-place -------------------------------------------------- UPDATE: Now including KIPP and CASE versions! Both of these versions have their text extruded for multi-color compatibility v1.1 now has stronger…

Downloads
4,193
Likes
733
Rating
4.97
P
PrintablesART TOO

CENTER FINDER V2.0 - CENTER MARKING TOOL (Print In Place)

Easy to print - center and quarter markings 2 sizes 120 mm 150 mm I made somme adjustmets so the partial marking are now correct. I want to mention https://makerworld.com/en/@fmod for the clear explanation. You can also follow him on…

Downloads
3,818
Likes
1,368
Rating
4.71
P
PrintablesPrusa Research

MINI Enclosure Printable Parts

All printable parts for your Original Prusa MINI Enclosure . The parts are divided into folders to fit according to assembly instructions. Print instructions Download the latest PrusaSlicer and use the following settings**: print…

Downloads
3,800
Likes
318
Rating
4.77
P
PrintablesM4NU

Unchain My Heart - Print in place bracelet

A simple and fast printed bracelet with heart looking rings and a simple lock system. 3 sizes : 170mm (11 hearts) 200mm (13 hearts) 230mm (15 hearts) Some ideas : Print 2 sizes to make intricated bracelets. Clip several bracelets together…

Downloads
3,736
Likes
686
Rating
4.78
P
Printablesmeron

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Downloads
3,645
Likes
766
Rating
4.93
P
PrintablesPhD3DP

Phone Stand Holder Seamless : print on side

A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES. More stands with various logo can be found in my other models, e.g.,…

Downloads
3,626
Likes
253
Rating
4.94
P
PrintablesAnia Kompa

Fully 3D Printable Working Djembe Drum

Update: Added bolt-joined 7 inch shell with 3 different drumheads. For this variant you will need additional parts: 3x M3x10 bolts, 3x M3 nuts. I'm a drummer who decided to check out if there is a possibility to print any great sounding…

Downloads
3,583
Likes
1,493
Rating
4.97
P
PrintablesJachu

Horse Minecraft Model 3D printable

Horse Minecraft Model 3D printable

Downloads
3,496
Likes
119
Rating
5
P
PrintablesFlexi-Maker

Print in Place Skeleton Dragon

This is a movable dragon skeleton that is printed in place. You need good bed adhesion. It has also been tested with edge and it comes off beautifully. Happy printing! I used Elegoo Filament Red. 3D Printing Settings Edge: No Supports: No…

Downloads
3,471
Likes
760
Rating
4.2
P
PrintablesMaciek

Print-in-place handcuffs

Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…

Downloads
3,249
Likes
336
Rating
4.89
P
Printablesyahbluez

The very First Print

TL;DR Single layer whole print bed, see how good or bad it comes out, no change to hide anything. Collection tools, 3D printing update 2026.1001 - Sovol ZERO added Sovol ZERO -> the tiny blue square ES_Sovol_Zero_152x152x0.2.3mf…

Downloads
3,180
Likes
444
Rating
5
P
Printables3D_Flexseeds

Flexi Squid, and Ammonite (print-in-place)

[Update] ---2024/07/14--- Added ammonite parts. You can make your own Flexi Ammonite. This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse and Printables. Flexi Squid & Ammonite Set by…

Downloads
3,176
Likes
854
Rating
5
P
PrintablesMakkuro

Working Slot Machine (Print-In-Place)

This is a working slot machine. It has a spring to spin two lucky wheels. Use the feet on the back to display the slot machine on your desk, so people will pick it up and play. Or print it as a toy for your kids, grandkids, or friends.…

Downloads
3,119
Likes
953
Rating
4.97
P
Printablesanimatorgeek

Snake puzzle toy (100% 3D printed)

Edit July 2nd 2022: uploaded new version without unneeded hole supports . I found several other snake toy models online but none of them lived up to my hopes and dreams. I wanted one that didn't require extra hardware and had a satisfying…

Downloads
3,021
Likes
1,008
Rating
4.67
P
PrintablesMrViddy

Basic Clamp - Print In Place

Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…

Downloads
2,869
Likes
973
Rating
5
P
PrintablesTechNerd

AirManagerV2 recirculating air filter for 3d printing enclosure

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…

Downloads
2,702
Likes
1,501
Rating
4.79
P
Printablesc-arts-modelle

Lukisegler-NG XS 3d-printed mini RC-glider

Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…

Downloads
2,685
Likes
596
Rating
5
P
PrintablesFAYRON

Voronoi Printbed Scraper [2]

The CIUNCARELLO Voronoi has a distinctive Voronoi design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…

Downloads
2,669
Likes
106
Rating
4.83
P
PrintablesBTR3D

Poker Chips (Dual Color, Dual Side, for all printers)

You can print dual-color, dual-side poker chips very easily. Specially designed not to use support. All you have to do is change the filament 2 times in a print. Chips are 40 mm in size, but you can print any size you want. Chips: 1, 5,…

Downloads
2,602
Likes
262
Rating
4.73
P
Printablesjtuckwitz

T-Rex Chicken Arms modified for easier printing.

T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…

Downloads
2,602
Likes
269
Rating
4.83

QuBenchy - 3D Printing Torture Test Cube

With the surge of more advanced and affordable 3D printers, any cheap, average machine can now poop a decent 3D Benchy . That defeats the very purpose of the benchmark, and calls for a new one that can stress the printers again. Also, 3D…

Downloads
2,426
Likes
491
Rating
4.92
P
PrintablesYstrouzas

Prusa i3 Octoprint Raspberry Pi case

This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…

Downloads
2,397
Likes
515
Rating
4.38
P
Printables3DTimon

Ghostface Chibi – Cute Horror Icon for 3D Printing

🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…

Downloads
2,380
Likes
447
Rating
0
P
PrintablesSASSy Design

Pineapple Crown - Pot and Planter for your House Plants - Vasemode print

Pineaple + Crown = An idea that poped into our mind a few days ago and we created a pot design out of it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…

Downloads
2,315
Likes
708
Rating
4.94
P
Printablestransformat

Foldable Gear Fidget Toy / Print-in-Place Test Print

Foldable Gear Fidget with Hand Crank Toy, fidget or test print with decent tolerances > try to scale it down to test your printers calibration. For perfect motion add a drop of oil into the gaps around the 4 gears/wheels. Printing Tested…

Downloads
2,311
Likes
555
Rating
4.88

FlexiDinos Fünther the flexi Stegosaurus print in place articulated dinosaur (Günther 2025 update)

You did it! The original Günther has reached 15.000 downloads, so here it is: Fünther. It's like Günther but one better. With a shaped body so it fits the rest of the FlexiDinos. Edit, 23. 7. 2026: Updated the MOST 1:100 version and cover…

Downloads
2,305
Likes
298
Rating
4.98
P
PrintablesFlexi-Maker

Print in Place Skeleton Wing Dragon

This is a movable dragon skeleton that is printed on the spot. You need good bed adhesion. It has also been tested with edge and comes off beautifully. Happy printing! 3D Printing Settings Edge: No Supports: No Extent: 2 Filling: 5%…

Downloads
2,268
Likes
426
Rating
4.8
P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Downloads
2,193
Likes
222
Rating
4.27
P
Printableshvrkh

Mini pocket hanger/Mini skládací ramínko - camping version, print in place

Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší? Tiskne se v jednom kuse, bez potřeby podpěr!…

Downloads
2,180
Likes
739
Rating
5
P
PrintablesLoboCNC

Tiny Pliers (Print-in-Place)

These tiny pliers print in place without supports in about 45 minutes. They've got notched jaws for grabbing nuts or circular items, and have a built-in opening spring for easy manipulation. They have a 0.4mm gap around the pivot pin, so…

Downloads
2,156
Likes
553
Rating
4.89
P
PrintablesMeister Edel

Stable Hinge !upright printable!

Some time ago I was looking for a nice hinge to finish the encasing of my printer. Thanks to J-Max I found a nice hinge. It was easy to print and a lot stronger than the versions lying down. (https://www.thingiverse.com/thing:1396038) But…

Downloads
2,116
Likes
300
Rating
4.91
P
PrintablesImagine That

Golf Tee - Asymmetrical Flat Print

I want to say this is a pretty standard golf tee, just it is asymmetrical to be printed flat. This should help strengthen the tee due to the lengthwise layer lines. Disclaimer: I'm not the golfer, I was making golf things for my dad, and…

Downloads
2,086
Likes
177
Rating
4.65
P
PrintablesJoshPeddle

Cherry MX Compatible Flat Top Keycap - FDM optimised - Simple to print

Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…

Downloads
2,086
Likes
177
Rating
5
P
PrintablesMeister Edel

Contour Gauge / Duplicator 100% printable!

Heyho :) Yesterday I set myself the task of designing a relatively complex and completely 3D printable contour gauge. Here is the result :) Small disclaimer: I know this tool has many individual and small parts! So make sure your printer…

Downloads
2,073
Likes
1,100
Rating
4.89