Counting matching models…
Do you have Makita batteries and chargers? Do you want to use cool Ryobi tools? Don't want to spent £20/$25/€22 on Badaptor or Surebonder? Then this is for you! Print instructions This is a proper Makita battery adapter for Ryobi tools.…
Bambu's new TPU-For-AMS is a contentious material , primarily because the default profile is not good (which is often true, sadly). Annoyed that I got 4 rolls of this stuff that kept breaking along Z-layer lines, I set out to fix this. I…
The other SD card holder broke one of my SD cards. and is kinda ugly. This is basic, and includes an option for “full” and “empty” text versions. If you enjoy it, please give me a “Like” :)
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
So, i was tired of the stupid springs tensioner that was too tiresome to use. And designed my own proper tensioner that actually tensions the belts with a dial nut. What a novel concept, haha. Remove the sping. Replace the back cover of…
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
Private Property No Trespassing Plate This 3D printable model is a warning sign with three dimensional human bones, skull and English text. It is intended for installation on a door, cabinet or any board or object. You can put it on your…
A “Private Property No Trespassing” sign. Works well when printed in white and gone over with red permanent marker. You could also do a color change during the print to get the raised letters and borders to be a different color.
The Green fluorescence protein (GFP) needs no introduction. This is a cartoon representation of the GFP with the chromatophore depicted as balls. I made this model for teaching protein folding, as this is great for showing beta-barrel. If…
It is the same great Monopoly Player Tray / Organizer by BuildX but the left tray for the properties cards is wider for the new wider properties cards.
Using same needles and same countersunk bolts. Trim needle handle to 7mm and add 20 and 30mm for the actual needle. No mods beside needle positions to make them work when scaled. Will work with standard 49mm Pre Mil La Pavoni and IMS…
This is an ISO527-1A test specimen for determining stress/strain characteristics of plastics through a tensile test. Materials to be tested and updated are: Prusament PLA Prusament PETG HIPS Prusament ASA TPU Prusament PC Blend Prusament…
This is a quick and dirty outhouse I whipped up for the Bambu printers. Now yours too can do its dirty deeds in a proper poopin place. I hope you like it. The holes on the back are for the 6mm x 1.7mm neodymium magnets that work so well…
I couldn't find a serious sign that said what I wanted. I got tired of solicitors and businesses using my door handle as a trash can. It was was very quick to model and I'm very pleased with the text detail, thanks to arachnid. Using…
*Added cutouts for 4mm M3 Heat inserts, to mount the extruder to the toolhead. *Fixed orientation of the model, shortened the total length of the end prongs sticking out. (unnecessary, prone to breakage after printing in original model)…
I resized the meeple of stone age to the actual size of the meeple in the game. Category: Toys & Games
Properly converting the BoboVR M2/M3 to the Apple Vision Pro. This print will allow you to convert a BoboVR M2 or M3 halo style head strap to fit the Apple Vision Pro. Unlike other conversion efforts that adapt the existing Meta Quest…
Print, insert magnets and gloves, enjoy.
The “proper” 3dp Pubbox. This is for all intents and purposes the OG 3dp Pubbox, i just added some holes and slots to the bottom for 2 m3 inserts to properly attach the connector covers and made my own version of those. Also added some…
Reason : I first realized I had to reverse the top right and bottom bolts for the x-gantry wheels so that the nuts would not collide with the x-gantry bracket on the right. However, after flipping the bolts around, I had the new problem…
Note: Updated on March 4, 2021 with a new motor tray and double gear that uses 625ZZ 5mmX16mmX5mm bearings. When I put together the laser cut acrylic filawinder kit that I bought in early 2020, I thought two things. This is very flimsy…
I found that the existing wingspan tray lid by Drakka01 had some issues with being used as a multi-material print, so I recreated it
Original did not fit a 12 ounce can - this does. See photo. Category: Food & Drink
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
During my fight against breaking idlers i slightly modified the x-axis to achieve better alignments between rods, bushings and timing belt. A T20 GT2 idler and a 3x18mm dowel pin as axis are needed.
I was looking for a fused y carriage since i figured it would take human error out of the assembly. Found one model on printables but it was poorly put together and wasn't even aligned properly as one half was sticking out the other. So,…
Made to support Freon canisters while charging AC units. When charging AC after replacing components, it is important to vacuum out the system and then charge based on weight using a manifold gage set. This stand allows the small freon…
Simple dice. I have used marker for dots (last picture), must found better marker xD Photos are as always warser then real object, so print and look self. I have designed my own dice as many other dices here are wrong. Proper dice must…
I made this cool little model to help maintain temperatures on pla prints.
I found a similar designs and saw that all of them have food safe temperatures, this is not useful if you want your food to be tasty, for example the recommended temperature for chicken breast is 165F, which completely dries out the meat.…
I didn't like the look of the available models so I decided to make a new design that is as close as possible to the original parts as without the need for supports. The bottom pieces are available in multiple inner sizes to account for…
PLEASE READ THE TEXT FILE CONTAINING THE SCREEN FLIP INSTRUCTIONS! MAKE SURE YOU FOLLOW THE PRINT ORIENTATION PICTURED FOR THE BRACKET FOR MAXIMUM STRENGTH. That being said you just need to comment out two lines in the sovol config to…
Rotating URBI thing, but now, properly split up
Property guard by Attack Cat funny sign 0,2 layer, multicolor 3MF files included is for Bambulab printers with AMS (Bambu Studio or Orca Slicer). Also 3MF for AK3 with ACE PRO. STL included.
The remix model measures the same as the “Sandwhich” box from Dante, but has “Snack Bags” on the lid. Note that the tabs are different than the actual sandwhich box from Dante, so print both of the files out for the complete box.
Recommend Print 0.24mm layer height, 0.6mm line width, 2 perimeters, 15% infill. seal with liquid polypropylene if not water tight.
This is a custom 3D-printed alignment shim designed specifically for the Mangoal Ford Maverick 4K Dashcam (Model: MGA 032DBA). Its purpose is to correct the factory camera angle, which can otherwise capture an excessive amount of the…
A properly licensed (GPL3) simple voron style keychain. no supports print it and enjoy. step file included customize to your hearts desire! The design is obviously inspired from the standard voron logo, it is my creation of that logo but…
Ploopy's Github has multiple versions of the scroll wheel across the STEP and STL files. I struggled finding the most current version, but now I have gathered all three parts and posted them here. As of 02-Jan-2023, these three files are…
Properly labeled switch cover including on/off, logical state, and electronic diagrams. No more asking yourself "Is it up or down to turn the light on...???" Sure, you can observe the current state and just flip the switch the other way,…
WARNING - PROPERTY PATROLLED BY RANCOR, sign Category: Signs & Logos
Here is a quick and dirty way to keep your precious 0.1mm (or other) shim stock flat and easy to use for bed leveling. Print Cut a strip of your favorite shim stock no more than 20mm wide. (I use 0.1mm) Put into holder The holder should…
Just a remix with more room/height so cable won't bend so much
This model allows you to use the Buddy3D camera with the Prusa XL. It even works with the EnXlosure (but that is tight). This is a multi-remix of multiple models: The 3DBuddy redux model The Heatbed accessory mount The new version 2 has…
I designed this to hold one of those cheap thickness gauge tools you can get on Amazon (link below) so that it can measure the thickness of filament being extruded from my Filastruder rig and spooled up by my ProperWinder. It can…
7.17 or 8.65 litre Modular panel case for bc-250 with AXP120-X67 or SL-100 or JF13K cooler I designed a modular case with better cooling, litres smaller than competitors using low profile CPU coolers for ultimate silence, temperature and…
Holder for heat gun properties Pattfield
This is the ROCKET CANDY model, a rocket designed for experimenting with and learning about aerospace propulsion. This model is specifically sized to be powered by: A D9-5 type black powder motor. Or DIY solid propellant (Rocket Candy…
No supports, holes down.
Backplate for the low compact display mod for ender 3 displays by Proper Printing https://properprinting.pro/product/ender-3-low-compact-display-mod/ Great looking mod, I do not like a exposed back PCB though just in case i accidently…
The original kept loading at weird angles and I couldnt get it to lay flat in Orca so I used Cura to make it lay flat.
Fixed the axle to ensure the wheels are not scarping against the sides of the holder and fixed the axle so it locks the spring properly. It all works nicely now! Many many thanks to Joe Mike Terranella for his original remix of the…
private property sign Category: Other
Z as cleaner. Ik heb het ergens gezien maar de afmetingen klopte niet voor de Core One, daarom heb ik ze aangepast. Ik heb 4 modellen gemaakt met een gaatje van 3mm, 3.1mm 3.2mm 3.3mm en 3.4mm. Zo kan je met product de as proper maken,…
Finally! It's a proper ghost for Halloween! Have you ever wondered what it would look like for a ghost to dress up as the Monopoly Man? Printing Instructions: Ghost Supports: Organic/Tree Wall Thickness: 0.6mm Perimeter Generator: Arachne…
While making a tipping bucket rain gauge is in principle fairly straightforward, making it robust and durable yet sensitive is not, as we learned the hard way. Others have even more experience, and we found their musings most helpful…
A unit circle made for vision impairment. I had a student who sometimes uses classroom tools for learning. I may upload a non-braille version. My student told me that you can paste braille dots on surfaces with some special tape. That…
silly sledge v30 i guess, spent half a week prototyping the ejection but didnt get it to work, everything else dimensioned correctly works well, have fun! feel free to remix this again to get it to eject properly if you would like to ask…
Proper guard for all quad with 8.5mm motor. Just print and clip! Protège hélice pour tous les quad nano qui ont des moteur en 8.5 mm. Toute la série des QX de eachine est compatible : QX80 QX90 QX95 etc... Category: R/C Vehicles
I wanted to make a new sign for my new house so that people didn't wander up my driveway. I went with “PRIVATE DRIVE NO OUTLET… GUESTS AND DELIVERIES ONLY”. I made a variety of versions though so you can say it the way you want to. I have…
shop signage Category: Signs & Logos
A simple sign that can be scaled larger. A larger sign may have more clearly defined lettering; however, this is dependent on your printer. PETG was used since this will be exposed to the weather. No supports are needed, and a color…
The abandoned property with two houses, a fence and a table was made in Blender 4.0. The textures and props (the bicycle and the tree) for this scene were taken from the blenderkit-v3.11.0.240207.
WARNING - PROPERTY PATROLLED BY RANCOR, sign Category: Signs & Logos
I modeled the Type V variation according to the standard instructions provided here: https://borgoltz.aoe.vt.edu/aoe3054/manual/expt5/D638.38935.pdf . I use a laser cutter to cut my material using the .dxf file provided. Please note, the…
Bezel for the proper printing compact display mod: https://properprinting.pro/product/ender-3-low-compact-display-mod/ Removes the gap between the display and the case.
Gizmonic Institute - Property of Deep 13 License Plate Frame, MST3K Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
This is a Creality Laser Module mount for ProperPrinting's sprite toolchanger . I kept switching between laser cutting and 3d printing, and I was getting tired of screwing and unscrewing the extruder. Then I found this sprite toolchanger.…
Please refer to this model for more info and assembly details. This model is compatible with the standard Satsana fan duct as well as this bltouch version.
yipady yapady get of my property sign
There's 2 files floating around, both need work. one isn't set to scale, other has no hole. I fixed them both.
Prints just fine with standard settings.
simple remix adding a divider to
Want to Support me? Post a Make Give it a Like PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- About: If you use (or have on hand) a Rainin/Mettler Toledo lab box, you've probably run into a common…
Welcome to the Boksen Loge! A selection of human made 3d printable slatwall shelves to offer utility and aesthetics. I have provided a few variants from my own usage in horizontal and vertical orientation. These are made to hang only one…
Rotating URBI thing, but now, properly split up
A very simple cross in the proper direction. Looks awesome in a keychain or similar. I didn't have the filament for it, but I would have printed the wider area black and the smaller area red. That would have been very nice.
A unit circle made for vision impairment. I had a student who sometimes uses classroom tools for learning. I may upload a non-braille version. My student told me that you can paste braille dots on surfaces with some special tape. That…
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
silly sledge v30 i guess, spent half a week prototyping the ejection but didnt get it to work, everything else dimensioned correctly works well, have fun! feel free to remix this again to get it to eject properly if you would like to ask…
A properly licensed (GPL3) simple voron style keychain. no supports print it and enjoy. step file included customize to your hearts desire! The design is obviously inspired from the standard voron logo, it is my creation of that logo but…
This is a custom 3D-printed alignment shim designed specifically for the Mangoal Ford Maverick 4K Dashcam (Model: MGA 032DBA). Its purpose is to correct the factory camera angle, which can otherwise capture an excessive amount of the…
A very simple cross in the proper direction. Looks awesome in a keychain or similar. I didn't have the filament for it, but I would have printed the wider area black and the smaller area red. That would have been very nice.
https://www.amazon.com/dp/B0DPK6CMXJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 a core that fits this kit from amazon
The original acrylic piece that mine came with was cut incorrectly and resulted in very wobbly movement, which meant the printer couldn't print at all. After seeing how many people had a similar issue I decided to just remodel it and…
In an effort to get the ProperWinder (link below) to run at a more consistent speed, I remixed the wall mounted laser sensor (also by universaljoint) so that the laser and sensor are all on the same unit, which then moves on its bracket.…
Just replace the regular crotch piece of the Dummy 13 with this one to give your Dummy 13 a proper Heroe's look and some clear masculine identity! ;-)
![Prusa XL + Buddy3D [+ (optional) EnXlosure] = Finally a proper camera! V2.1](https://media.printables.com/media/prints/cc1ff817-1bc4-422b-8db8-b8621fb7fbab/images/9932174_79ba0de8-bcc7-42f4-9842-4478fb3b0da4_d38beba8-87ac-48ba-bcf0-e3dc7d675355/screenshot-2025-06-02-at-163442.png)
![[Proper Printing] Ender 3 compact display mod backplate (no extra fasteners needed)](https://media.printables.com/media/prints/625997/images/4963338_23506deb-2e25-4eb1-a896-27396c10eff4_a111db7a-d55d-48b4-8df9-0a194867838d/20231025_130045.jpg)
![[Proper Printing] Ender 3 compact display mod bezel](https://media.printables.com/media/prints/625565/images/4960197_0c22fa3b-e4db-4a9a-94c2-7164acd17988_c06e7bd9-9685-403f-9403-785504ae69ec/20231025_005337.jpg)
