1,378 models
Maximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern. Check if your hard drive fits and has this mounting pattern on bottom. Printing To assemble one case,…
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…
Any feedback is welcome Because of the frequent use by young people it seemed smart to make a case to protect the Micro:bit against falls and damage. This is an easy snap-on case that keeps all functions of the Micro:bit working while…
UPDATE: There was an issue in the RC3 version, Prusa fixed this in RC3.1. I changed the gcode and 3mf file here as well to this updated RC3.1 design. This file can be used to print 8x the RC3.1 version at once on your MK3/MK2.5(s). Print…
Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…
I designed this experimental case to protect my 18650 batteries from short circuits in storage. The two halves screw together, creating a cover that protects the battery. I printed it with Elegoo pla, using variable layer height (0.3mm,…
The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.
This mini protective case is specifically designed for the Nothing Phone (3a Pro) . It provides targeted protection for the camera module without compromising the phone’s unique design. Features: ✔ Discreet design or not that perfectly…
It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…
I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…
I wanted to mount the LCD case to a proto board setup and decided mounting tabs with holes was needed. I placed the tabs to the bottom section using Tinkercad. They will now take a pair of #6 screws, placed 3.75 inches apart. Only the…
Description Recently was gifted a pair of generation 2 AirPods and wanted to print a case that protected them from drops and scratches. I really liked AWillows Apple AirPod Case design on Thingiverse but my AirPods came with a…
The protective jaws have notches with which round material such as pipes can be securely clamped. There are holes for magnets (diameter 6 mm, height 3 mm) included. This is possible vertically or horizontally. It works well with PLA, but…
See my updated compact version , best for 1 pair of skis. I kept getting ads for “SnoStrips” , a kind of unecessary way to keep your skis upright when getting dressed before hitting the slopes. “$50?!” I thought - “I could make that.” And…
Protective cover designed to seal and safeguard the holes in the two end supports of your 3D printer’s table. This dust cap prevents dirt, debris, and small particles from entering, helping to keep your printer clean and running smoothly.…
Looking for a protective case for your Oudie 4 or 5 ? All ports are accessible apart from the sd-card slot. It is practical so you can charge your instrument in flight or plug your Oudie on your computer without getting it out from the…
Protects the surface of your Aviator wallet when unscrewing the coverplates
I created a protective cover for the CO2 control valve for my CO2 pressure bottle, which I use for tapping beer, which can be easily inserted and removed from the pressure gauge. They are nicely hidden to avoid damage. I printed from PLA…
Protective Slipcover for Yaesu FT-2D and FT-3D HTs. Not sure if it also fits the FT-5D or not. Noticed the front of my Yaesu FT-2D was getting scratched up, so I designed slipcovers for my HTs to protect the LCD displays when you put them…
The holes are adapted to the Cuda console. Die Bohrungen sind an die Cuda-Konsole angepasst.
You can fix a soft material to the print by using the “felt lock” part to hold down any variety of materials
Deutsche Beschreibung unten ↓ Introduction This model provides a protective cover for a hinge of 32mm height, a diameter of 18mm and a hinge thickness of 3mm. Print file The print file provides two covers printed using PLA. Modify the…
✨ Remix of the iPhone 12 Pro Case ✨ Original design: Printables – iPhone 12 Pro Case Special thanks to @Printerly3D for sharing the Fusion 360 file – it made this remix much easier! I’ve also uploaded my modified .f3d file so you can…
Clip for securing together the velcro bands of a BBQ protective cover to prevent separation when it is windy. I did it in black PETG filament material.
The cover is designed for the PORTA handle, which originally has sharp edges and can cause injury to children.
I love having my JSAUX split protective case, but still wanted to use the charging grip due to the grip buttons. Though I did not want to keep taking the joycons out of the shell each time. Parts used from joycon grip: All the screws from…
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
Only works with an anti-freeze plug for heat-conductive paste (can be found on my profile). Number of perimeters: 4 Bottom wall thickness: 1 mm Top wall thickness: 1 mm Internal fill: 40% Material: PETG (ESD)
Parametric protective case/toolbox with a groove for an optional seal. You can modify width, length, height, corner radius, screw hole size, hinge position, rib and box thickness. Print settings any rigid filament 0.2mm layer height 0.4mm…
This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…
A protective case for the Samsung Galaxy A55 designed to be printed in flexible filaments like TPU. The STEP file is also provided for easy customization in the CAD program of your choice. 2024/06/21 : Updated the design to be 0.6mm…
Tired of repeated darts assembling and disassembling? Do you need simple, one-piece protective cover which will keep your darts safe and flights straightened? This is the solution for you, I hope. ;) Video: https://youtu.be/pb-j95AZSgk…
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…
Change log: 03.08.2025 - v2.1 released. Much better sizing for the one.pice model. 02.06.2025 - A one-piece model v2 for printing with TPU added. STEP file can be downloaded. Some dimensional inaccuracies adjusted. 25.04.2024 - First…
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.
Case for iPhone 8, designed to be somewhat more protective than other prints. Print with TPU. Print with PLA on the first few layers for a ridged back plate. I haven't tested how protective the case is, but it's better than the very…
Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…
Update: Don't want to delete the post, but this version has been further reduced in size and improved, so here are links to the newer versions: For the original Shield (240 x 240 mm), here:…
A snap-fit Samsung A22 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, the underside radius form (shape) nearest to the plate is questionable. Further reducing the layer height may…
Three versions of a GoPro Hero 10 protective case. Version 1: With front screen cutout Version 2: With partial front screen cutout to show only the relevant top and bottom bar recording information Version 3: Without front screen cutout…
I couldn't find a decent protective case for my S23FE, so I made this one in Fusion360. Mine is printed in SBS filament (from FilX), but any of the less flexible materials (PLA, PETG) should work. Supports are required for the area…
The controler has a manufacturing defect and cracks in the lower area, this case reinforces the controler and can be used on the already destroyed controler. Put the controler in the packaging, it's tight.
2024-The hard shell version has been redesigned and anti-loosening buckles have been added. https://makerworld.com/zh/models/100371#profileId-198369
I have a set of Festool clamps I use mainly with FS2 Rail. I wanted to add protections to use them as standard clamps and protect wood surface I designed and 3D printed both pads in Prusament PETG Jet Black with my MINI+. No support…
Template to make it easy to cut shields for the Prusa protective face shield Print instructions Just any filament will do
2 part TPU strap for the Prusa Protective Shield. Should fit most size heads. Print instructions Depending on your TPU hardness, you may have to shrink or grow the Z axis. Softer TPU should be printed thicker, while harder TPU should be…
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers Revision 1 • Modified width to be compatible with…
UPDATE: updated versions of the fastprint is located here as I couldn't update the files on this page anymore: https://www.prusaprinters.org/prints/26902-prusa-face-shield-speedprint-rc2-a4letter-iso838 UPDATE 2020-03-23: Updated with a…
Although several designs exist, I wanted a minimalistic one, so I designed one myself Requires no additional hardware, LCD fits snuggly in the casing. Casing clicks together. Requires some supports for better result ( supports for the…
A flipable cover to protect accidental pressing of a round pushbutton. The round opening has 22 mm diameter. 2x M3x6 screws needed for the joints.
There are some usb-c dust protectors on printables but they were too bulky or too shaky for me. That's why I designed my own protection for my smartphone with a Pitaka protective cover. if you need any adoption or change let me know :-)…
I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping. I came up with the idea to stack them on top of each other. Instead of 2 you could print 8 during night. If your printer has…
I wanted a protective sleeve when throwing my apple Pencil in my backpack. However, I didn't like the options I saw around. All the prints require unscrewing, unsnapping, or other multi-part motions to get the pencil in and out. My design…
Print in any setting, insert converter and tighten it down with 4x M3 screws.
Protective cover for Hasselblad magazines 12, A12, A16, A24 etc. Snaps into place on a magazine. Locks the dark slide into place. Printing Tested printed in ABS and PLA with 0.2mm layer height.
Hikvision protective shield for KV6103/6113 series villa door station.
Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…
This rugged box was designed as a durable and versatile storage solution for electronic devices and small equipment. Its sturdy construction makes it suitable for transport, everyday use, and demanding conditions. It features a reinforced…
Shorter print time version (2 headbands in 2 hours). Compatible with RC2 visor. Print instructions Material: PETG Layer height: 0.3 Infill: 0% Perimeters: 3
This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…
I made this protective case for a Samsung Galaxy S23FE, specifically to be printed in a flexible filament like TPU. Supports are required for bridging areas. STEP file is also included for those who wish to remix or customize. If you are…
Two lenscaps connected by a stretchable connection, so no matter what IPD you have your pico4 set to, it will still fit and protect your display from sunlight focusing through the lenses and damage the displays. Because they are connected…
What are these good for This is a protective terminal cap for use on standard 9V batteries. Protects 9V batteries when not in use Shields the battery contacts, reducing the risk of a short circuit Protects battery contacts from damage due…
Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…
Set myself a half day challenge to half the print time of the RC2 face shield. Prototype revision for high-speed printing 1 hour 30 minutes for 1, could be faster. We are currently producing sets for food delivery volunteers for the…
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
Three versions of a GoPro Hero 9 protective case. Version 1: With front screen cutout Version 2: With partial front screen cutout to show only the relevant top and bottom bar recording information Version 3: Without front screen cutout…
This 3D model represents a replacement protective tip designed specifically for the 4th generation TipToi pen. This tip ensures the longevity and functionality of your TipToi pen, providing a cost-effective solution for maintaining its…
Whether you're going portable, mobile, or stationary keeping your radio safe is important. This is just a simple cover designed to slip over the face of the Yaesu FTX-1 it can use either a hair band, or elastic cord to secure it to the…
This is modifed version of the initial vase mode design. Primary goal was to reduce print times and plastic use for PLA disposable printing... This design compared to RC2 uses 3 to 4 times less plastic and is usable... It is much improved…
protective case for apple magic mouse 2 created in fusion 360 photos show printed in black matte pla and white matte pla model is separated into the two 3mf files , one for the case , and another for the sleeve (that prints in spiral vase…
I modified the RC3 version to make it even smaller in height, which saves about 1/3 Filament per print. Logos/Texts are also removed for higher printig speeds. Print 2 complete Shields (Headband & Bottom) in under 2 hours! Update I've…
This carry case can hold 1 Ozempic pen and 4 needles safely and securely. Ideal for travel. The hinge and clasp use M3X30mm bolts. You will need 6 of them for a complete case. There is a gasket that 1.75mm TPU can be used to created a…
This is IKEA Skadis protective glasses holder. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made . Update…
Why I created this After 2-3 game sessions I spottet some wear on some tokens. To preserve a nice appereance of the tokens I created this protective shell / case. Print instructions Works best with a flat print surface (not textured).…
Protective case with printable inserts for either the Accu-Chek Instant or Accu-chek Active blood glucose meter. The insert has space for the glucose meter, lance and test strips. The Instant insert also has space for spare lances. There…
Pendant case to attach an AirTag accessory to a bag or backpack. The rounded corner case can be used to put an AirTag accessory into a bag or suitcase and still protect it from scratches. Print out the lower and upper part, insert the…
This is a remix of another Token case. I wanted something that was a little more sleek but still protective. I made it a lot smaller all around, and the opening on the back the same shape as the token instead of just a circle. I also…
EN: Prusa Protective Face Shield punching and rounding template for visor. It is based on the dimensions given here:…
The protective goggles were designed to help medical workers or any other users, who are at risk of getting infected with the SARS-CoV-2 virus that causes the COVID-19 disease. It presents an alternative to face shields. This model…
Took measurements of a 50A connector and basically remade it with divets instead of pins and a small ramp on the inside to make disconnection a bit easier on the plastic. It fits quite tight in there, about as tight as another connector…
I designed these caps to safeguard my ice axe (model Raven by Black Diamond). I used them to cover the sharp edges during flight and transport as well as while hiking. I printed them in PLA and they worked well as intended. However, the…
This is a remix of the Prusa Protective Face Shield RC2/RC3 to extend the face shield so that it wraps around closer to the temples to provide more side protection, and adds an integrated top cover similar to the Prusa top cover. I also…
This is a remix of the high speed print version of the Prusa Protective Face Shield. It uses 3d printed clips eliminating the need to punch holes in the plastic sheet. The clips are slid onto the frame over the plastic to hold it in place…
xt90 male connector protective cap has a convenient hole to be able to tie it to the wire so you will not lose it As connectors are slightly different, you may want to scale a bit (0.5-1%) to fit your exact xt90 male plug
This is a thin but strong protective case for the Arduino UNO Q, showing some electronic components of it and as well as having gaps for USB-C and QWICC connections, which are common with Arduino. The best part? No screws needed! Just…
The Braun Series 9 Pro shavers come without any protective covers for the blades. This model is a snap-on cover for the shaver that protects the blades, eg. when traveling. The holes on the top provide ventilation, in case the shaver is…
Overview The case is made of 4 pieces: 2 knurl-padded inserts, that are to be printed in TPU/ flexible/semiflex. 1 outer case part with an outwards screw thread (like a bolt) 1 outer case part with an inwards screw thread (like a nut) The…
Rosewill doesn't sell spare caddies for their RSV-4412 cases and RSV-SATA-Cage-34, but if you've somehow got spares, don't leave them naked and afraid. Enrobe them in this handy protective sleeve. You should probably print this in…
A snap-fit Samsung A15 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, depending on the print setting used, the underside radius form (shape) nearest the print bed may need some…
The model represents a full redesign, with perfect fit, of a previous protective cover, here for reference. The cover is designed to be light and small, adding 2 mm around the phone. It is also designed with lowered rounded borders in the…
This is a protective shield optimised for fast printing on FFF 3D Printers without supports from PET-G. STL models for printing 1, 8 and 10 shields at once. Printing 1 shield (top+bottom) takes only about 1 hour and 30 minutes. Printing 8…
I recently went to treat myself a little bit and spent a little extra money for a new set of bluetooth earbuds. These WF-1000XM4 earbuds are amazing… and have the price tag to match (for a relatively broke university student, at least…
print as is is (no support needed) fits LeGo snugly with a space for comfortable remove lining can be added as the width of is bigger 2x m3 screws needed (at least 25mm) 2h printing time for bottom and 1:45h printing time for top on Ender…
No support needed, with 95A tpu (15% infill, 0.38line width for top cace) Some clear VHB tape is recommended (at the corner of the case), similar for the bottom one.
Description LED protective cover for mini lamps that have mini Bowens mounting system Print instructions Printing info: Printed on Prusa MK4S, PLA 0.25mm layers 40% cubic infill (higher infill to reinforce Bowens tabs)
