93 models
By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
I needed a 3D model of a head to size other models so I remixed this one.
Want to prototype levels for a game on paper, but it always turns out to be a scribbly mess? Already 10 hours into a game jam and your artist still hasn't finished the tileset? On the go and got a killer idea for a level? This stencil…
Info This prototyping board is specially designed for the Elegoo Arduino Mega / Uno starter kits, and their breadboards. For the Arduino Uno, the small adapter plate is printed in addition to the board. The two Arduinos are attached to…
Needed a stand at my desk for work so i created this. Four sizes for a desk stand utilizing DIN rails. Easy print just requiring printing of two equal parts, and using DIN rails of your required length to piece it all together. Strong…
These are 3D printable parts that are designed to allow FRC teams to quickly prototype mechanisms. They are inspired by the various other 3D printable prototyping systems such as HYPEblocks, Quick Build Connectors, Protopipe, etc.…
This linear rail is meant to be a rough representation of an actual linear rail. The replica's carriage slides along the rail, but may be lacking the smoothness and may have a bit more play than the actual thing. That being said, the…
This is a 3D printable dummy model inspired by the iPhone 16 layout. It was created using publicly available dimensions and reference images to match the look and general shape of the device. Best Used For: Prototyping general accessories…
Arduino prototyping platform to test and experimant
This model can be used as an inexpensive and configurable breadboard alternative, with the advantage that the components can be soldered in-place. Print instructions Important Notes You need a 0.25 mm nozzle to print this The electronic…
This is a remix of the Game Prototyping Stencil , except it's now designed to hook into and stay attached to the rings of a wire bound notebook. This prevents it from getting lost by sliding out of the binder. As in the original print,…
Metriccano is not only a good toy, but it puts the “rapid” back in “rapid prototyping.” There is a library of parts based on 10mm centres that can be fastened together with ordinary M3 screws and nuts. While it looks like a construction…
This is a stand when used with some DIN Rails makes a useful electronic prototyping rig. You will be able to move your prototypes easily with it. In the picture, the bottom part of the stand is 20 mm higher than the height in the supplied…
Arduino Breadboard Prototyping Plattform für Arduino Nano (mit Schraubterminal) und Arduino Uno. Statt mehr oder weniger lose Teile auf dem Tisch, lassen sich Experiment mit Arduino stabil auf der Plattform fixieren. Dazu ein Breadboard…
Nice Prototyping board for Arduino Uno or other Arduino Boards Print Settings Printer: Sparkcube Rafts: Doesn't Matter Supports: No Infill: 20 - 40 % Category: Electronics
A breadboard plattform made for three Busboard BB830 breadboards (others should fit too), of which two have one of their power rails removed. This allows the board to be used with most ESP32 prototype boards, since they can be plugged…
This is a spacious case designed for the Raspberry Pi Zero and Zero W. Especially useful is the external SMA antenna mount. I have modified my rpi0w to use an external antenna by soldering a U.FL connector to the provided pads next to the…
Pictured is a project that came from this one; a MiSTer FPGA setup with power supply, USB hub and RCA audio in a mini-ITX case. If you print this with 100% infill you will have a solid plastic unit that can be cut and drilled (brad point…
This is a stand I created for prototyping. I print everything flat and then weld it together using a 3d pen. Alternatively, you can use glue. You can also assemble the model in your slicer and print it as one piece. I created a bezel for…
This is a holder for 3 breadboard units and simple power supply distribution. Requires soldering, some banana jack inputs and 3 breadboards. The parts are glued together.
Standard set of prototyping PCBs as far as I can see generally covers these sizes: 20 x 80mm 30 x 70mm 40 x 60mm 50 x 70mm 60 x 80mm 70 x 90mm This is a set of 2 bins (A and B) to store them. Can be printed on 12x12cm print beds. There's…
Nice Prototyping board for Raspberry PI b, b+, 2,3,3+ Print Settings Printer: Sparkcube Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 20 - 40 % Category: Electronics
These are pieces I like to use to quickly make a shapes from cheap 16 mm PVC tubing. They friction fit, but you can glue them too. They are designed such that all the tubes intersect through a single point. If you do not like the angles,…
this is probably mainly interesting for those who like to refine the trigger group of the FGC6FA semi auto kit. it can help with diagnosing the function of the parts. and help in just having to deal with a small item on your desk. this…
Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…
Convenient platform for quick prototyping. Houses a breadboard and an Arduino (R3, R4, Leonardo). Includes room for two built-in push buttons and three LEDs. I can connect the LEDs directly to the Arduino (or to the breadboard) because…
Some prototypes which use these blocks: Simple clamp-on blocks with minimal unsupported pockets. Finger press fit of 1.125 inch diameter bearings. Shown with 24 tooth belt pulleys
Modular frame to help you with your DIY arduino/electronic projects. So far modules allow you to mount Arduino mega,Arduino Uno (and probably clones of these boards, but i can't guarantee they'll fit), prototyping boards, prototyping…
BBC's Micro:bit is a lovely little platform to power simple yet clever projects. You can use the two real-life, physical buttons and display information using the LED grid only. But you can achieve more if you plug external peripherals,…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . NOTE: When printing these, it is…
This 24-tooth spur gear is a precision-modeled, 3D printed mechanical component designed for robotics, engineering projects, and prototyping applications. With clean, accurate tooth geometry and a solid center for maximum strength, it’s…
Arduino Uno Prototyping Deck The Prototyping Deck was designed to improve my workflow when testing my electronics projects. The top half is designed for prototyping and the bottom half will neatly store any accessories. The 2 halves snap…
This is a stand when used with some DIN Rails makes a useful electronic prototyping rig. You will be able to move your prototypes easily with it. Feet are also provided to tilt a bit the stand (15 degrees). You will find on Thingiverse…
Инструмент для прототипирования, который позволит за пару движений создать внутренний отсек с необходимыми размерами. Спроектировал как прикладной полезный инструмент при создании органайзеров для настольных игр, который позволит…
A 3D model of the Adimlab 3D printer to use for prototyping of modification designs. The STL is a placeholder. The 3D model is included in .obj, .dxf, & .3mf format. Some parts are missing and yet to be modeled but can be used as-is for…
This is a prototyping board designed for making patterns for NeoPixel devices. I'm working on a project using a full strip of NeoPixels, but I wanted a smaller prototyping kit so i didn't have to mess with an entire strip just to work on…
CUBESAT prototyping frame for power modules
Why print a rail? Real SBR20 rails are heavy, long, and hard to cut. This printable model is perfect for: Mocking up builds: Visualize your frame size and component placement before ordering hardware. Fit Testing: Check if your 3D printed…
Designed for easy prototyping base breadboard and development boards. Modules can be changed according to needs.
This is a Rick Sanchez head for the R series droids that you can buy at Disney or build at the droid depot in Disney. You can print in multiple colors if your slicer allows you to paint the modes like you can do in the Bambu studio.…
This compact perforated board is sized 90 × 90 × ~3 mm with a dense, symmetric hole grid—handy for zip-ties, M2–M3 fasteners, and wire routing. It’s sturdy enough for small brackets and mock-ups, yet quick to print. Also included: four…
This is a stand when used with some DIN Rails makes a useful electronic prototyping rig. You will be able to move your prototypes easily with it. Feet are also provided to tilt a bit the stand (15 degrees). You will find on Thingiverse or…
This is a simple, easy and fast to print jig for the Nextion NX4832T035 - 3.5" HMI TFT LCD Touch Display Module. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Category: Electronics
Only thing that isn't accurate is the fin dimensions, the actual fins are 1mm thick with 3mm space, mine has 2mm thick with 2mm space. Everything else is precise, I made it because I need to make a mount for it and an extruder mount that…
The Little Linkage Set is a small collection of linkage components designed around M5 hardware for quickly exploring motion, mechanisms, and mechanical ideas. I originally created these parts while experimenting with linkage designs and…
Pivoting stand for 50x70mm prototyping board. Has holes for mounting M2 stand-offs. Approximately 180 degrees of rotation. Cable strain relief bracket on right of stand. Pivot point is made from M3 screws and heat set threaded inserts. Be…
Many times it annoys me that I have no easy way of putting a wire to a battery when I'm working or a prototype or try to troubleshoot/fix a battery powered device. This with an addition of two M3 screws (or any other - just widen/drill…
I didn't want my Pi to slide around on my desk all the time so I made this. I didn't like the ones I found online because I wanted something very minimalist. The pins the Pi rests on are 6mm in diameter. This is the same as the mounting…
Recently, JLC PCB stencil cutting service decreased its prices for small prototyping stencils up to 100x100mm in size. These are now really cheap (just a few bucks)! Due to a lack of jigs for these stencils, I designed an adjustable jig…
How to print: - 10 to 15% gyroid infill works well enough with a modern printer - 2 walls - Make sure the seam is out of the opening, paint it on the outside if the fit is too snug it might help. You can probably get away with less but…
After cursing one too many times while trying to prototype with an ESP32 on a standard breadboard, I decided there had to be a better way. Most ESP32 development boards are wide enough that when you plug them into a typical breadboard,…
A simple jig to bend solid core wires for electronic devices prototypes. The shape allows for flat bends as well lifting the wires over some obstacles (e.g. THT components) Print notes No supports needed 0.4mm nozzle should provide enough…
Prototype Board Display Stand Pivoting stand for 60x40mm prototyping board. Has holes for mounting M2 stand-offs. Approximately 180 degrees of rotation. Cable strain relief bracket on right of stand. Pivot point is made from M3 screws and…
I'm someone who loves to tinker with various gadgets, I also love the concept of portability. Sometimes I find myself prototyping, breadboarding, or just tinkering with different microcontroller development boards on my laptop, but I want…
Elevate your electronics workflow with the KRO Labs Modular Dev Board. Designed from the ground up for hobbyists, prototypers, and makers, this board gives you a clean, stable platform to mount your favorite microcontrollers and run…
This is a modular base plate designed for electronics prototyping and small mechanical builds. It uses a 3mm circular hole grid spaced 10mm apart , allowing you to mount components, fixtures, or stack brick-style modules on top. The…
I could not find a printable STL file to protect my PSOC6 Wi-Fi BT PROTOTYPING KIT (CY8CPROTO-062-4343W) board I use for school. I did in fact found this website were someone makes the case I provide here, but this person didn't provide…
A utility for organizing cables during electronics prototyping. Printing: The examples in the pictures were printed with Flex 40D , but PLA and PETG should also work.
Use this file to design your own custom enclosures, mounts, or accessories around the exact dimensions of the board.
This is a simple prototype rig I build for the Nordic NRF52840 developer kit board. It helps keeps things in place. Category: Electronics
The ESP32 Mini Dock is a lightweight, secure, and practical solution designed to keep your development board in place during the prototyping phase. It prevents accidental shorts on your workbench and provides a stable base for connecting…
While researching prototyping parts I found some that helped lead me to these designs, this one is specifically made for the 550-motor. The larger holes are set for 10/32 (.25in) This is to be attached to a 1x1 stock piece.
While researching prototyping parts I found some that helped lead me to these designs, this one is specifically made to hold two 1x1 pieces together. There are two versions a plan one and there is one with organic holes to help reduce the…
2" PVC Section, For Sizing and Prototyping If you need to design around a 2" PVC and do not have any on hand, this model can be used for test fitting and scale. Outside diameter- 60.3 mm Inside diameter- 52 mm
Simple 2 part puck tu put on micro servo motor for attaching anything.
Carefully designed and prototyped for 3D printing, this kit is the ultimate modular building block system. I will keep uploading new parts, to make new things possible. Please upload pics of what you make! Use square connectors for…
Some embossed shapes that you can label and attach magnets to for war gaming, game prototyping, operation planning (CERT drills, Marathon SAG tracking, any tabletop exercise). Circle magnets in picture:…
The Workshopboard is a stable and modular baseplate designed for experiments and prototyping with an Arduino Mega 2560. It provides a clean mounting solution for the controller and includes a dedicated area for an AZDelivery 400-pin mini…
Here are a collection of Button mounts I use in the Arcade Prototype Controller . They are designed for use with 3-inch Arcade Buttons which have a 1-inch mounting hole. Included are three different types: Double Extrusion Mount - This…
Just a simple box housing esp-32 30 pin board and 3 way speaker terminal, with cut outs for any type usb, and to reach the GPIO pins, which are labled on top for easy reference. Add a layer change on the lid with lighter color on top for…
This is a prototyping tht pcb hat for RPi3-4-5. Printing guides: material: PETG (Tarfuse) infill: 100% lines first layer: 140% line width and 110% flow
A nice stand for project work. there is a cutout at the back to allow wires to run from the middle of the held item. Ideal for a solar panel, small screen or other flat item. We use it to hold a solar panel. It doesn't take up too much…
Simple to print piece of Skadis that you can use for prototyping any designs you make. Printing: 0.2mm is good, no supports needed
When designing it's often useful to print out a small part of it to see how it works, saving time and money. You can set up a couple of extrusions in your design software and toggle them on and off, or you can right click the part in…
Studenti si samostatně navrhnou (včetně měření), vymodelují a vytisknou pomůcku pro usnadnění manipulace a práce s vývojovými a prototypovacími platformami, jako Arduino, Espressif a jejich varianty.
Remix of the perforated 90×90×3 mm prototyping board with edge pegs and matching connectors. What’s different - Edge pegs are Ø3 mm (= board thickness) so the board prints flat with no supports under the pegs. - Each peg sits off the side…
A cutout for storing Makerspot Prototyping boards Designed using onshape: https://cad.onshape.com/documents/7b222617e1c5034b9a282f73/v/ee9cb8610d8eeb7ec7a85639/e/f89bcedb56f174ceebff54dc
Most foam cutting tools are dangerous, like knifes and hot wires. This rasp allows you to easily shape foam, without the risk of injury. I designed this for my father, who is a elementary school teacher,
The transition from additive prototypes to metal parts in production usually doesn’t work due to process variations. Slicing compensation and thermal shrinkage cannot be directly translated into CNC instructions. The success of this…
Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…
Metriccano is not only a good toy, but it puts the “rapid” back in “rapid prototyping.” There is a library of parts based on 10mm centres that can be fastened together with ordinary M3 screws and nuts. While it looks like a construction…
Just a simple box housing esp-32 30 pin board and 3 way speaker terminal, with cut outs for any type usb, and to reach the GPIO pins, which are labled on top for easy reference. Add a layer change on the lid with lighter color on top for…
The Workshopboard is a stable and modular baseplate designed for experiments and prototyping with an Arduino Mega 2560. It provides a clean mounting solution for the controller and includes a dedicated area for an AZDelivery 400-pin mini…
Why print a rail? Real SBR20 rails are heavy, long, and hard to cut. This printable model is perfect for: Mocking up builds: Visualize your frame size and component placement before ordering hardware. Fit Testing: Check if your 3D printed…
The ESP32 Mini Dock is a lightweight, secure, and practical solution designed to keep your development board in place during the prototyping phase. It prevents accidental shorts on your workbench and provides a stable base for connecting…
The Little Linkage Set is a small collection of linkage components designed around M5 hardware for quickly exploring motion, mechanisms, and mechanical ideas. I originally created these parts while experimenting with linkage designs and…
A cutout for storing Makerspot Prototyping boards Designed using onshape: https://cad.onshape.com/documents/7b222617e1c5034b9a282f73/v/ee9cb8610d8eeb7ec7a85639/e/f89bcedb56f174ceebff54dc
This model can be used as an inexpensive and configurable breadboard alternative, with the advantage that the components can be soldered in-place. Print instructions Important Notes You need a 0.25 mm nozzle to print this The electronic…
This is a 3D printable dummy model inspired by the iPhone 16 layout. It was created using publicly available dimensions and reference images to match the look and general shape of the device. Best Used For: Prototyping general accessories…
Have you ever printed something for your IKEA LACK table and struggled to fit it? Or designed something and realized that you don't like it? Now all those struggles are away. Download now and live happier life with your LACK
