Search results: put

Computer Model

Cute little print of a computer, perfect as a gift for any of your friends that are involved in IT

PutinDick

Raven: Put a bird on it 2

Ravevn: Put a bird on it 2

Computer Monitor Wall Mount Accessory

I've been looking at Monitor Mounts for a while but just couldn't find one I liked at a decent cost. I printed these on The Original Prusa i3 MK3S with the MMU2. I attempted to provide my Gcode but the site does not allow for my nozzle…

Put A Bird On It.

Put a Bird On It. Decorate your 3d thing with this bird.

Milwaukee M18 Heavy-Duty battery holder (High Demand & Forge) // Milwaukee M18 Akku-Halter (High-Output & Forge)

Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…

Computer Floor Stand

A wider version of the stand made by SubSide . Due to the increase in width and decrease in height, I couldn't keep the same central arch as the original. I added some tree-like arches, to make it less boring and use less material. The…

Apple IIe Computer

A mostly-correct model of the 1983 Apple IIe computer. Good for printing models or texturing for renders.

Mini Tower Computer Case for the Raspberry Pi 5

Mini-Tower Computer Case for the Raspberry Pi 5 with acrylic windows and NVME daughter board. Any NVME HAT should do the trick but I used the slim ElectroCookie one for its minimalist style and quality. The case clips. You can add a M3…

MK4, PLA, 0.4 nozzle, Input Shaper Temperature tower

This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.

Modular enclosure compatible w/ CM4-NANO-B Base Board for Raspberry Pi Compute Module 4

WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…

Xiaomi Mi Computer Monitor Light Bar mount for Logitech Streamcam

This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…

HDD (SSD) Adapter 5.25" to 3,5" or 2 x 2.5" for HP computers

Adapter for the installation of a 3.5" or up to two 2.5" drives into a 5.25" bay. Tested on HP Compaq Elite 8300 micro tower. Tell us in the comments which other computer models this adapter fits to.

Computer Monitor Stand

I wanted to design a simple monitor stand that would prop my screen up higher as well as create a place for my computer (Mac mini), audio interface and midi keyboard. I split each side of the stand into two pieces to make it easier to…

MK4/MK3.9 printable parts for Print with XL InputShaper

Pre-Sliced print Parts for MK3.9/MK4

Bike Computer GoPro Style Mount - Garmin, K-EDGE, Lights, Camera

A mount for a GoPro style fitment, compatible with K-Edge style bike computer mounts or any computer mount with 20mm spaced M3 holes. Printed in PETG for UV resistance. Needs 25mm+ M5 bolt and nut and 2x 8mm+ M3 Countersunk Bolts. Several…

Computer Danger

This is a funny remix I made of "Printer Danger" by Greecher

Right angle vacuum fitting for Dust Deputy cyclone separator

This is a right angle fitting that attaches to the top of a Dust Deputy cyclone separator. This fitting makes it less likely to kink your vacuum hose. For standard 2 ½ inch vacuum hose. I printed it in one piece in PETG with supports. You…

Cute Computer Keychain

Design Concept This "Cute Computer Keychain" features an adorable, smiling computer character, crafted for all tech enthusiasts. Purpose Perfect for personal accessories or as a charming gift for computer lovers, this keychain adds…

Trivalent ITX - a compact 3D printable computer case

Centering the design around a high degree of portability, and focusing on the aesthetic provided by triple fans mounted front-and-center, Trivalent ITX is the portable PC you've always wanted… and if not, then it's at least the one I've…

Cute Computer/Laptop Keychain

Design Concept The Cute Computer/Laptop Keychain is designed with a friendly and playful expression, making it an ideal accessory for tech enthusiasts or as a whimsical gift. Purpose This keychain serves as both a decorative accessory and…

Pressure Advance Linien 0.6 Nozzel MK3.5 und Input Shaper Test

Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…

Input Shaper Corner/Fillet Test

The 3mf file has the seams distributed a little bit to check their impact. My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok. Just print it and see if yours look nice. I added pauses to…

Computer Case for Beelink Mini PC

This computer case was designed for my Beelink SER5-Pro 5800H Mini PC but it may fit other Beelink computers and possibly other brands. Here are the steps to figure out if your PC will fit into this case: The hole is 131mm wide, 118 mm…

Cute Computer Bank (desk companion - kawaii piggy bank)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Cooler Master Elite 330 Computer Case Power Button

Seems that a broken power button is common with this case and looking at the flimsy original I can see why. This simple replacement will keep my case out of the garbage. Hopefully yours too. I recommend printing in PETG for the…

MagSafe Charging Station – Put Your Phone to Sleep in Style!

MagSafe Charging Station – Put Your Phone to Sleep in Style! Product Description: Introducing the Phone Bed , a charming and functional MagSafe charging station designed to give your phone a restful “sleep” as you recharge overnight. This…

Computer Charger Holder

A small addition to your laptop accesories. It is meant to hold your charger so it wont bother you on the floor. Its easy to instal with screws or double sided tape. Its ment for 32 mm thick charger but you can scale it if yours is…

Gundam Top Plate For Corsair 280X Computer Case

This does not permanently alter the Corsair 280X case. You can print both sides flat on the build plate if you'd like but there will be a texture difference. If you choose to use the full STL turn the model 45° in prusaslicer and bisect…

Fysetc Input Shaper mount for Elegoo Neptun 4/Pro

Remeixed the Fysetc Portable Input Shaper Mount from https://www.printables.com/de/@WhatAMess13_573337 so that they fit on a Neptune 4. The data should now be oriented correctly. I printed them with 0.2 mm layer height and support.…

Sigma Bike Computer wall mount

Mount for your Sigma cicycle computer (Rox 12/Rox 11 evo/…) at a vertical surface with 2 srews. Use screws mit a head of 8mm. I am not shure, if its necessary to print it with brindges. I put the g-code data in the attachment with…

Retro Computer / Electronics Chess Pieces.

Retro Computer / Electronics Chess Pieces. If you want to make them larger I would use Split to Objects and resize them and or move them into more even rows and columns and then regroup and resize. Based on Original work by Dark_Igorek on…

Computer Virus

Nothing to add, I made a meme 3D If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you don't like monthly payments, you…

The Chavín Pututo (Carved Strombus Shell).

The Chavín Pututo (Carved Strombus Shell). The Chavín Pututo is a ritual trumpet crafted from the Strombus galeatus , a giant marine conch shell, and serves as a primary artifact of the Chavín culture of the Peruvian Andes (c. 900–200…

Blinkenlights computermachine warning signage

Ein Satz Warnhinweise, um Unbefugte auf die Risiken unsachgemäßer Bedienung hinzuweisen, und Leitlinien für das angepasste Verhalten zu geben. Traditionell benutzt für Rechenmaschinen, hat sich aber auch bei anderen elektrischen…

New 'Crazy Detail' Reputation Lithopane Taylor Swift

I printed with a .2mm nozzle for best results

Computer display adjustable support

A support for computer display with adjustable legs

Computer PC Model for Gift

This is a small PC you can print for a PC person. Use it as gift token. Fusion 360 file included so all you need to do is change the text to put someone else's name on it. You can also split the model on the desk surface and move the…

Computer Fan (120mm) to 100mm Ventilation Pipe Adapter

Allows connecting normal 120mm computer fan to a 100mm ventilation pipe (e.g. to draw 3D printer residual vapors and gasses out). If you print 2 of these, you can face one on both sides of the fan. I used 120mm Noctua with the speed…

"PRUSA hook" ... Never put your bag on the floor again

Easy to print and nice to have. NEVER put your bag on the ground again, if your are in a restaurant, in the garden or in the office. Printed in PLA+ Athena from Olympfila. For a stronger hook, you can printed in a stronger material like…

Glassa computer glasses holder

Created from a company logo. Two-color printing with 5% fill. Practical mouth for cloth or USB flash drives. The glasses used are COMPUTER GLASSES PCG09 BLUE . Vytvořeno z firemního loga. Tisk z dvou barev s 5% vyplní. Praktická myska na…

Computer Stand

This is a computer stand!

Prusa CORE One Heatbed Cable Entry Cover with Input Shaper Accelerometer Cable Support

This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…

Tablet Computer Base / Stand

I designed this base to raise my Surface Pro 7 computer by 15cm since the standard kickstand keeps it at desk level. I observed a (self-imposed) restriction to NOT use any external piece, screws or glue to assemble the structure, which…

Wall mount for computer speakers by Creative/Cambridge Soundworks

A 45 degree corner wall mount for Creative/Cambridge Soundworks Digital computer speakers. Probably only works for a specific model of speaker, I'm not sure what mine are. The attachment method is designed similar to the original, with a…

Suunto Eon Steel scuba diving computer Bungee mount

A wrist mount to allow for bungee fitting of a Suunto Eon Steel dive computer to your wrist. Three benefits over the traditional rubber strap : Adjusts to your suit compressing with depth. Moves away from a single point of failure - with…

Home Assistant wall mount for Dell 3040 WYSE computer. (Version-2)

I have a Dell 3040 WYSE mini computer running Home Assistant. This is the wall mount I designed for it. Not perfect, but should get the job done. I plan on printing in light blue filament. 1st design was a little to tight. Version-2 is…

Tux (linux) and computer

The models are built on a plinth with the school logo.

Box für feuchte Brillenputztücher/ Box for damp glasses cleaning cloths

Wir lagern die feuchten Brillenputztücher in einem Schrank im Badezimmer. Damit dies etwas ordentlicher geschieht, gibt es nun diese Box. Die genauen Abmessungen können der Skizze entnommen werden. Translation: DeepL We store the damp…

Aufputzdose kompatibel mit Wieland Einbaurahmen für Einspeisesteckdose der RST-Serie

Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung NEU: Es gibt zwei Varianten, die sich durch die Art der Wandbefestigung…

Keystick: Enhancing playability for computer gamers with reduced mobility

The keystick is printable mechanical linkage that converts 4-way key actuation (2, 4, 6, 8) into a central joystick move . Context and motivation This proposal is based on an old idea from Spain's Centro de Referencia Estatal de Autonomía…

Tarmo 4 Output bell housing upgrade

I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…

Computer Dock Desk Side Bracket

Designed for a Kensington SD1500 USB-C Mobile Dock but should be able to be modified for any of these type docks that connect via a USB. Print instructions pretty straight forward, best to print these with the large flat portion against…

Mount for LED Panel (Aputure MC)

This is a mount for the Aputure MC mini RGB light. The panel is held in place by magnets (20x5x2mm) embedded under the first 2 layers of the Print (0,4mm). On the back ob the main plate is a standard GoPor mount. So it could be attached…

Gridfinity epoxy putty holder

Holds a 2oz tube of ep200 epoxy. hole is 27.5mm in diameter. Has a small indent for a magnet if you want to glue magnets to the putty tube to make it stay better but it doesn't need it.

Putin Fridge magnet

Putin Fridge magnet and NO ACCESS magnet. Uses 8*3mm magnets

Putty knife holder

Putty knife holder to screw on wall or beam

Portable Input Shaper bracket for Bear extruder

It's a simple Portable Input Shaper bracket for the Bear extruder. For the X axi, the bracket take place on top of the front fan. For the Y axi you can simply use paperclips.

Blackstar ID.core V3 Power Input 2.1 x 5.5mm Conversion Bracket

Hi, I decided to convert my Blackstar Core ID.3 to use a 12v barrel jack with the smaller 2.1mm inner diameter. The input provided is a 5.5mm x 2.5mm, but the smaller one seems more common and is what came with the battery pack I bought.…

Articulated Spirit Dragon_ Dragon_No Support_Easy Output_Print at once

If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…

Radius Caliper (No Computation Required)

Radius Caliper with no computation required. What you see on the screen is the measured radius. I see a lot of design of radius gauge/caliper but they all require you to calculate the radius based on the measured value. But as an engineer…

put on the printer Bambu AMS drawer Stand

The length has increased and is basically consistent with AMS. With the increased height, opening the drawer will not touch the printer screen. Move the spacer behind the middle to cover the handle. It is recommended to use PAL printing,…

Anycubic Kobra 3 / K3 Max / S1 Combo - 5 Port Filament Input Hub V2

Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…

Putt Putt Golf Hole

This model is a golf hole for indoor putting! The hole size is the standard golf hole size.

Junction box with four inputs and printable gaskets

New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…

Golf Putting Gate - set of 3 sizes

As an avid golfer, I'm always hitting a few putts between print runs, so I thought why not make some practice gates to hone my skills with! They come in 3 sizes 50mm, 60mm and 70mm wide, as you get better you can use the narrower gate to…

Articulated Spirit Dragon_Flexible Dragon_No Support_Easy Output_Print at once

If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…

Cable clip (computer cable managment)

Suggested print settings: 0,2mm layer height 65% infill 0.4 nozzle No supports needed - 45 degree wall is easy to print Post your makes, and like this project 😍

Pavanputra Hanuman - Son of Wind God

Hanuman is a symbol of strength, loyalty, devotion and dedication. He was the son of Vayu, the god of the wind, and Anjana, a celestial nymph. In this comic inspired original concept, Hanuman is depicted carrying the his iconic mace, 'the…

Dummy 13 Computer

**Bend the joint 45 degrees as soon as you take it off of the baseplate, or use a heat gun afterwards. ** This is a dummy 13 computer. When you print it, your dummy will start learning how to work, and maybe start binge watching all it's…

Putin Octopus - Cute mini putinpus

Putin Toilet Brush Holder

I originally made this as a gift, and it came out great! You can use this as a toilet brush cup or as a flower pot. I made this for 85 mm diameter brush, so if your brush has a different size, scale both models like this before printing:…

COMPUTER CABLE TRAY (Modular)

This model is meant to help give a place under your desk for all your cluttered computer wires to go. There are grills for cable ties and the design is modular so you can make it as long as you need it! There are 4 clamp sizes depending…

Garmin compatible outfront mount for bike computers

Garmin Edge computer compatible out-front handlebar mount for 34mm handlebars Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.16mm Infill: 30% Filament: Spectrum ASA275 black I have printed it…

The Single PrintPuter pc case

First and foremost : Use at own risk! It might melt or catch on fire if your setup is lit. UPDATE: The left ssd runs a bit hot, it is covered a bit to much. use only the right slot. or edit the file. UPDATE 2 : I have been alerted by a…

Bohrschablone für Unterputzdosen

Ideale Hilfe zum anzeichnen von Unterputzdosen. Abstand von Dose zu Dose beträgt 71 mm. Durch die Nut kann die Schablone perfekt an einem Laserstrahl ausgerichtet werden. Seitlich habe ich noch zwei Flächen angebracht um eine Wasserwaage…

Blackline Plus - The 3D Printable Putter

This custom putter was designed to fill a gap in the golf world. Price. Now, not everyone needs to spend a small fortune just to get a competitive edge in the short game. Complete with customizable weighting to boost performance, the…

Deadputo

a representation of the deadpool charisma

16-bay 3.5" DAS made from an ATX computer case

If you have an old ATX computer case and power supply lying around, why not use it to expand the storage of your main PC? Turn it into a DAS! (Direct-Attached Storage) This design mounts 4 disk racks in the space that would normally be…

Golf Putting Training Aid

I designed this putting aid to help improve my sons aim with the added benefit of the ball rolling back to him if he doesn’t manage to get it in the target spot. I have also added a blank insert if you just want to have some fun getting…

Libre Computer AML-S905X-CC (Le Potato) base case

Remix of Stamos' case for the Raspberry Pi 3. Made for the Libre Computer AML-S905CX-CC (Le Potato) SBC that has the (mostly) same layout as the Raspberry Pi 3+. This is set up with a hole for the IR receiver as well as indentations for…

Bohrschablone für Unterputzdose

Bohrschablone für Unterputzdose - 71mm Abstand Maße 300x80x8,5mm

computer stand

computer stand, for computers with a maximum open thickness of 13mm, to compensate for machine overheating.

Aufputzgehäuse

In diese Aufputzdose sollten alle unterputz Schalter und Steckdosen passen, die nicht tiefer als 34mm sind. Für größere Objekte kann das Modell mit gängiger Software einfach ein wenig "gestretcht" werden. Lochabstand ist 60mm Category:…

Putzausgleichsringe 60mm / High Plaster Distance Rings 60 mm 6 - 25 mm height)

Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…

Taylor Swift Reputation

Made this as a Christmas gift for my girlfriend who loves Taylor Swift. Two part kind of print, I just glued her legs to the platform when they were done. You will probably need to rotate the platform so the flat part is laying down on…

Reputation - Taylor Swift Album Cover

Nozzle: 0.4mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. A brim is recommended to make sure it doesn't lift Filaments Used: PLA Elegoo/Sunlu Black Transmission Distance: 0.6 PLA Elegoo Gray…

Computer Mouse House (Wall Mount Storage)

You're probably asking, "What in the world is a "mouse house" and why would I need it?" Well, most folks probably don't, but I did, so I made a fancy dancy holder for basic computer mouse to be put up on a wall when not in use. Perhaps…

M5Stack Cardputer Case

I wanted something to protect my Cardputer when I carry it in my jacket pocket. Buttons, power switch and SD card are all accessible on the back without removing the device from the case bottom as well as the USB-C port on the right (the…

Star Trek TNG Computer Terminal

Star Trek - The Next Generation Desktop Computer Terminal In an effort to create a small Raspberry PI based desktop computer for things like time logging, I got inspired by the iconic design of the computer props in many Next Generation…

Putty knife 5 inches

Quick putty knife that worked great for patching some drywall. The blade is just shy of 5 inches. Easy print on an MK3 with PLA at 0.2mm.

FLSUN V400 FYSETC Portable Input Shaper Mount

FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.

Easy Prusa MK4 Input Shaping Calibration

Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…

Slim 8BitDo Ultimate Phone Mount with Modular Mounting System (with ports for USB and D/X input switch)

A lot of thought went into this redesign. Thank you akmiller01 for the original model. What's different? Out of the way: Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so…

PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping

Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…

High Speed PETG Input Shaping Profile

This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…

Honeycomb Grid – Light modifier for Aputure MC

This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…

Vinyl Siding Mounting Blocks : Put stuff on your house!

Update on 2/10/2023: I added a different “Rastered” set that has only one registration ledge to accommodate people who may have situations where they cannot use the bottom ledge in the original design. These 3 new designs are the same…

Lego Compatible (62698.dat) Minifig Computer Laptop (Open)

This model is compatible with the lego system.

Golf Tees to put the ball on.

Golf Tees to put the ball on. 4 diffrent sizes, 54mm is ‘’standard'' If anyone has any questions please contact me, THop3D