Search results: railcore

Sort order

100 models

P
Printablesveng1

RailCore Bed and Texture(Overlay) for PrusaSlicer

The stl is used for the bed model in PrusaSlicer.and is installed int the Printer Settings tab, Bed Shape Model dialog. Load the stl .file Normally the stls are in the PrusaSlicer\resources\models. The Overlay or what Prusa calls Texture…

Downloads
167
Likes
4
Rating
0
P
PrintablesECF

Core XY 3D Printer (Railcore II derived) - Fusion 360

This Core XY design is based on the Open Source RailCore II project ( https://RailCore.org ) with a number of modifications, including: 2020 Extrusions (1515 is standard) Aluminum Bottom Plate Billet corner bracing Billet X Carriages…

Downloads
118
Likes
14
Rating
0
P
PrintablesThehead

Railcore LGX Mount using mosquito

Update 21Sep2023: I've updated the model with V3, after about a year or so I had a failure. V3 is vastly strengthened and should work for much longer. This is a mount for the Bondtech LGX with a mosquito attached for the Railcore. It is…

Downloads
84
Likes
10
Rating
0
P
PrintablesFractalengineer

Railcore II ZL X LDO Smart Orbiter V3 X Euclid probe mount

I've included a STEP file of the whole assembly for your reference For more info go to Smart Orbiter V3 Extruder: https://www.orbiterprojects.com/so3/ Euclid Probe: https://euclidprobe.github.io/ Cheers and happy printing! __Yves

Downloads
81
Likes
12
Rating
0
P
PrintablesRT3D

Railcore II Squash Ball Foot

I designed a squash ball foot mod for the RailCore II 300ZL based on the original files. Note: Squash ball will feel a little tight when putting them into the feet, just squeeze and rotate. Amazon: 4 x Squash Balls used -…

Downloads
73
Likes
5
Rating
5
P
Printablesjslaker

Railcore II Locking Door Hinge

This is a door hinge for Railcore printers meant to prevent the door from swinging open or shut on its own. It uses a simple pin in track mechanism to lock the door open at 0, 90, and 180 degrees. To move the door between positions,…

Downloads
58
Likes
12
Rating
5
P
PrintablesRailCoreLabs

RailCore® II 300 ZL/ZLT

RailCore® II 300 ZL/ZLT Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available…

Downloads
54
Likes
19
Rating
0
P
PrintablesCaitlin

PanelDue 7i Case for the Railcore II

This is my simple PanelDue 7i case for the Railcore II. The screen will be 0.5 mm recessed from the front but other then that everything should be flush with everything. The used M3x18 screws but any 3mmx18mm screws and hex bolts should…

Downloads
49
Likes
1
Rating
0
P
Printablesjslaker

Railcore 1515 Segmented LED Light Strip Diffuser

LED diffuser assembly designed to attach to the 1515 extrusion of the Railcore II. The assembly is designed for 10mm wide LED light strips that can be cut in 100mm segments. Each assembly dovetails into another so that the diffuser…

Downloads
43
Likes
7
Rating
0
P
PrintablesEvan

Angled Y Rail Backer & X Carriages for Railcore

This is my current take on supporting the Railcore Y rail with a backer to reinforce the axis and reduce ghosting. Holes can and should be tapped for M3 hardware, simplifying installation and (theoretically) improving performance (a bit).…

Downloads
39
Likes
5
Rating
0

generative z slider for railcore mini with lm10uu (2 versions)

There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…

Downloads
38
Likes
7
Rating
0
P
PrintablesJohnOCFII

Railcore Narrow BLTouch Mount

This remix of the RailCore BLTouch mount allows the BLTouch Y offset to be 36mm instead of 42mm from the nozzle of an E3D-v6. This will allow for a larger print volume in the Y direction. Print Settings Printer: Railcore 300ZL Rafts: No…

Downloads
33
Likes
4
Rating
5
P
PrintablesJoeMikeMakes

Railcore II 300 w/Bondtech Palette 2 (Pro) mount

This is a remix of thing: https://www.thingiverse.com/thing:2700231 I found that the original did not leave enough clearance for the inset ptfe fitting that this covers on the top, as well as blocked the idler from fully closing. Please…

Downloads
29
Likes
1
Rating
0
P
PrintablesRailCoreLabs

RailCore® Mini

RailCore® Mini Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available aluminum…

Downloads
28
Likes
17
Rating
0
P
Printablesibash

Railcore Side Mounted X Endstop

My railcore has a halo with magnums on the top, and misumi corner brackets on the bottom. So mounting the x endstop on the top or bottom of the extrusion is a pain. This x endstop mounts on the same side as the linear rail. Hardware: Two…

Downloads
27
Likes
6
Rating
5
P
PrintablesMatt W

Railcore II Voron "Sexbolt" Endstop Mount

This is a remix of the Voron mount from Hartk123: https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202-Trident/2.4/Voron2.4_SexBolt_ZEndstop I used the hardware kit from KB3D:…

Downloads
27
Likes
2
Rating
0
P
PrintablesThehead

Railcore Mosquito Orbiter V2 mount

See LGX page for hardware details as it is the same. BL-Touch offsets are: dY = 23.39 dX = -7.13

Downloads
27
Likes
4
Rating
0
P

Daedalus 2024 Update Project (RailCore II)

Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…

Downloads
26
Likes
8
Rating
0
P
PrintablesEmpiricus

Railcore II Y carriage for Dual extrusion

Railcore II Y carriage for Dual extrusion using the Bondtech BMG-X2 EXTRUDER and E3D Chimera. 2x GDStime Technology 24V 0.1A 40mm blowers for cooling. I use a Omron E2B-M12KN08-WP-C1 2M inductive probe with this. Slight updates and all is…

Downloads
26
Likes
2
Rating
0
P
Printablesjslaker

Railcore Orbiter v1.5 Mount

Mount for the LDO Orbiter v1.5 on the Railcore. Tested with the MRW native Mosquito mount. Two versions: Mount for the Orbiter only Mount for Orbiter with additional hardpoint for the 5015 Mosquito Duct Two M3 heated inserts required for…

Downloads
25
Likes
0
Rating
0
P
PrintablesJohnOCFII

RailCore II Logo

Simple logo test print for the RailCore 300ZL. Print instructions Printer: RailCore II 300ZL Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament: Inland PLA Gray

Downloads
25
Likes
0
Rating
0
P
PrintablesJames

Railcore dragon burner toolhead bracket

I am using this cowl, https://www.printables.com/model/851245-dragon-burner-bltouch3dtouch-cat-cowl-remix

Downloads
24
Likes
0
Rating
5
P
Printableswarpster

Railcore II Cable management, Toolboard Enclosure for Hemera.

These are additions I made to my Railcore II printer. Included is a cable management system, a Hemera toolboard.BLTouch mount and Duet Filamant Monitor mount. These are made to mount to the Mandela Rose Works Hemera Mount and Idlers. I…

Downloads
23
Likes
6
Rating
0
P
PrintablesPrintedSolid

RailCore Goodies

Here is everything I created for my Railcore build. There is the laser cut doors for both 300ZL and 300ZLT with a mount for the Duet PanelDue 5i. The side panels for 300ZL and 300ZLT with the cutouts for an Ultimaker Spool holder. Here is…

Downloads
22
Likes
2
Rating
0
P
Printablesjslaker

Railcore XRAT 2.0: Absolute Overkill Edition (X Rail Alignment Tool)

This is a major redesign of the XRAT (X Rail Alignment Tool) for the Railcore II. The basic principle is the same and the same operating instructions apply, but there are a number of improvements based on feedback from the community:…

Downloads
21
Likes
7
Rating
0
P
Printablesjslaker

Railcore II Adjustable Foot

This is a remix of the standard Railcore II foot edited to add height adjustability to compensate for uneven or bowed work surfaces. Use three standard Railcore II feet with this assembly in one corner, then set the height of the adjuster…

Downloads
21
Likes
5
Rating
0
P
PrintablesCynical Owl

Railcore II BMG + Precision Piezo Orion - Printed Y-Carriage

Railcore Bondtech BMG & Precision Piezo Orion Mount(s) This is a lengthy ReadMe that includes printing suggestions and required additional hardware. Additional components are listed at end, including required Piezo Mount. Update March 2…

Downloads
20
Likes
5
Rating
0
P
Printablesplc268

Railcore linear rail alignment jig for halo top

Just a jig to align the rails in the center of the extrusion. This is redone to accomodate the extra thickness of the optional aluminum halo top. I recommend printing it in PLA, just because it's stiffer than PETG. Print Settings…

Downloads
20
Likes
0
Rating
0
P
PrintablesJohnOCFII

Bento Box Base for RailCore

The BentoBox is a fine air cleaner using both carbon and HEPA filters with fan-powered air movement. The RailCore printers (and perhaps others) use 1515 extrusion as framing material, and I wanted the BentoBox stack to fit more tightly…

Downloads
19
Likes
3
Rating
0
P
PrintablesCynical Owl

Railcore II Aluminum Y Carriage Belt Retainer

Railcore II Aluminum Y Carriage Belt Retainer Rebuild/Remix of the Aluminum Y-Carriage Belt Retainer for the Railcore II. Changes include: Includes a Support Blocker stl - supports are not required inside the tension bolt tube and I found…

Downloads
18
Likes
2
Rating
5
P
PrintablesCynical Owl

Railcore II E3D v6 Threaded Heatsink Precision Piezo Mount

Railcore II E3D v6 Threaded Heatsink Precision Piezo Bottom Mount Bottom mount for the Precision Piezo Orion z-probe and E3D v6 with the Threaded Heat Sink. Part of the Emma Puggle Railcore II component set. Part of the Emma Puggle…

Downloads
17
Likes
1
Rating
0
P
PrintablesCynical Owl

Railcore II Drag Chain Solution

Railcore II Drag Chain Utilizes 20mmx10mm drag chain to clean up cabling. Uses approximately 25 chain links. The Motor Side attaches to rear of your extruder motor. I added some thin (2mm) cork between the motor and part to give a bit of…

Downloads
17
Likes
2
Rating
0
P
Printablesibash

Euclid Corner Mount for Railcore with Misumi Brackets

Based on the euclid railcore corner mount . This removes a bit of material from the corner mount so that the mount can be pushed higher. You probably don't want the exact model here, instead duplicate the onshape file and change the value…

Downloads
17
Likes
3
Rating
0
P
PrintablesThehead

LGX Mosquito Euclid probe mount for Railcore

Here is a early design for the Railcore using the LGX extruder with the Mosquito hotend and Euclid probe. The .step file has been uploaded, so feel free to modify it as needed. My guess is that the euclid probe mount area will need to be…

Downloads
17
Likes
3
Rating
0
P
PrintablesCynical Owl

Railcore II BMG + Precision Piezo Orion - Aluminum Y-Carriage

Railcore II Bondtech BMG & Precision Piezo Orion Mount Mount to allow use of the Precision Piezo Orion z-probe and BMG Extruder on the Railcore II with the ultralight Aluminum Y-Carriage. For a printed parts only version see my thing at…

Downloads
16
Likes
2
Rating
0
P
Printableswouldstain

PanelDue 7i Railcore cover friendly mount

This is a remix of the Lumberjack Engineering design found here . Same issue apply re: clones / off-brands. I have the MRW cover and related cover interface components installed on my 300ZLT which pretty much renders all of the 1515 rail…

Downloads
16
Likes
2
Rating
0
P
PrintablesPat T

Railcore 300ZL Z Tools

Here is a simple set of Z axis calibration tools. Use the step(or gauge block) to set either 25 or 30mm base resting height of the Z axis rails when loose. Center the rails to the extrusion with the block and tighten. Attach the yokes to…

Downloads
16
Likes
0
Rating
0
P
Printablesferrou5

Mosquito Hotend Hardmount for Railcore II

Wanting to make use of the Mosquito Hotend's ability to do single-hand nozzle changes, I decided to print a hard mount to adapt my railcore from the groovemount adapter that comes with the kits. I originally chose the SE-designed adapter,…

Downloads
16
Likes
1
Rating
0
P
Printablesveng1

RailCore SlipFit Electronics Box

When I decided to reprint the RailCore Electronic Box corners in a different color, I figured in true RailCore spirit, I'd just redesign everything. The corners do not require screws to hold in the sides as they just slide in and include…

Downloads
15
Likes
2
Rating
0
P
PrintablesMatt W

Railcore Halo Mount for Articulating Raspberry Pi Mount

I like the Prusa articulated camera mount but none of the options mounted very well to the 1515 profile and Halo on my railcore. Print Settings Printer: Railcore 300ZL Rafts: No Supports: No Resolution: 0.32mm Infill: 20% Filament: Atomic…

Downloads
15
Likes
0
Rating
0
P
Printablesplc268

Door knobs for Printed Solid's Railcore doors

I don't have these doors, but a user on the Railcore discord noted that the Printed Solid doors have a 19mm opening to use as a finger pull. These knobs are designed to go through the finger hole and thread on with the printed nut. Print…

Downloads
15
Likes
1
Rating
0
P
PrintablesThehead

Railcore mount with LGX Mosquito using Super PINDA probe

This is a prototype, fyi. I've printed it but have not tested it yet. The Pinda probe install into the mount is very tight but is manageable. The use of a heat set insert in the pinda probe mount with an M3 screw will secure the probe…

Downloads
15
Likes
0
Rating
0
P
PrintablesSteveDallas

RailCore Ebox mount for Lumberjack Engineering PanelDue case

This is a mount to attach the Lumberjack Engineering PanelDue (5i or 7i) case to the top front corner of the RailCore II series electronics box. Link to the case model: https://www.thingiverse.com/thing:2799628

Downloads
15
Likes
0
Rating
0
P
Printablessatre

RailCore Y-Rail Alignment Tool Y-RAT

Railcore Y-Rail Alignment Tool (Y-RAT). Will work with or without halo. Use these tools together with clamps while tensioning your belts to make sure your Y-rail stays parallel to your right 1515 extrusion. There are tabs at the bottom of…

Downloads
14
Likes
0
Rating
0
P
Printablessatre

Railcore II 300 ZL Electronics Box Corner Wago and Heatserts

This is the https://www.thingiverse.com/thing:3542340 modified for heatset inserts. It's for WAGO 222s (old style). If you have the new style WAGOs (221s) print this one: https://www.thingiverse.com/thing:3914814 Initeq (Amazon) inserts…

Downloads
14
Likes
1
Rating
0
P
PrintablesRiC0_MD

RailCore II Cable Clip - Side Mount

I wanted to retain the functional of the Filastruder Railcore cable clip, but I was putting interfaces for the enclosure on the top of the printer so I wanted a clip that side mounted. Print Settings Printer: Railcore II ZL 300 Rafts: No…

Downloads
14
Likes
0
Rating
0

Alternative feet for Railcore Mini

This is a more rigid two part foot that ties a long m3 machine screw into the extrusion end as well as interfacing with the 1515 extrusion on both sides. This requires ultrasert II heat set inserts, I get mine from Filastruder. Others may…

Downloads
14
Likes
2
Rating
0
P
PrintablesRobert

Magnetic Door Latch for Railcore II

This is a Door Handle for a Railcore II 300ZLT using a large single door. I wanted a simple magnet/latch solution for the door. Using the parts I had laying around I came up with this solution. Parts needed: 3 - M3x12mm Socket cap screws,…

Downloads
14
Likes
0
Rating
0
P
Printablesjslaker

Flex Plate Hanger for Railcore Side Panels

A simple hanger designed to store flex plates on the side of the printer when not in use. There are two variants: one with through holes sized for the 5.3x51.mm BOM heated inserts and another for McMaster P/N: 94459A130 4.7x4.3mm inserts.…

Downloads
13
Likes
3
Rating
0
P
Printablesjslaker

Railcore XRAT (X Rail Alignment Tool)

NOTE: This thing has been semi-superseded by the XRAT 2.0 . The old design still works fine, but if you're working on a new build, I would suggest considering the 2.0. That said, it is a slightly harder print and does require additional…

Downloads
13
Likes
1
Rating
0
P
Printablessatre

Railcore Emergency Stop

You will need: Any 19mm diameter emergency stop latching button. The one pictured works great and can be found here: https://smile.amazon.com/gp/product/B07FRYD9WK/ SPDT power relay: https://smile.amazon.com/gp/product/B07587NZTC small…

Downloads
13
Likes
2
Rating
0
P
PrintablesFractalengineer

Flex3Drive Railcore II Custom for Mosquito Hotend

This pack contains my customized Flex3D mount for Railcore II. It contains: -G5 base with integrated mounting bracket Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel. Also…

Downloads
13
Likes
0
Rating
0
P
PrintablesEmpiricus

Another Hemera mount for Railcore

More compact E3D Hemera mount for the Railcore. EBM-PAPST RLF35-8/14N 5cm blower and Omron E2B-M12KN08-WP-C1 2M probe. You have to turn around the Y-Rail to get 30x30 cm xy Support only around the opening for the blower. New blower shroud…

Downloads
13
Likes
1
Rating
0
P
Printablesveng1

Railcore ZLT Flipped Yoke Alignment Tool

This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the standard ZLT. Because the ZL does not have bearing holders, it is not required. The model is intended to print large side…

Downloads
12
Likes
0
Rating
0
P
PrintablesEvan

Railcore II NEMA23 Stepper Mount Rear Riser

When attaching NEMA23 stepper motors with damper to my Railcore® II ZLT, I found that the shaft of the rear stepper just barely fit into the pulley. I created this riser to fit between the top extrusion and stepper mount, raising the…

Downloads
12
Likes
1
Rating
0
P
PrintablesPat T

Railcore 300ZL single acrylic door mag latch and door pull set

Print at least two latches and one door pull. Set latches at desired location, mark, and drill with 3mm drill bit. Superglue magnets to door pull. Once dried, attach second magnet(s) to each mag latch, apply superglue, and press into frame.

Downloads
12
Likes
0
Rating
0
P
Printablesrbjam

E3D V6 Fan shroud for Railcore II

40mm fan shroud for E3D v6 for use with a Railcore II printer. This design also integrates the e3d groove mount clip, so that the fan shroud is holding both the heatsink and the fan in place. The advantage of this design is to make the…

Downloads
11
Likes
0
Rating
0
P
PrintablesCynical Owl

Railcore II Part Cooling Fan Support Bracket

Railcore II Part Cooling Fan Support Bracket Small accessory bracket to add some support to your part cooling fan which has the possibility to droop over time. Requires attachment point on belt retainer. Tested compatibility with my…

Downloads
11
Likes
2
Rating
0
P
Printableswarpster

Railcore Lower X-Stop Mount

This is a replacement X-stop mount for the Railcore 2 printers. The original mount puts the stop switch actuator almost exactly inline with the hole in the Aluminum X Carraige (not sure on the printed one). Any skew at all to the mount…

Downloads
11
Likes
1
Rating
5
P
Printablesjubs

BL-Touch Mount for RailCore2

Mount for the BL-Touch to the standard Railcore 2 y-carriage. Print solid in PETG or PLA. The model includes a print-in-place support for the captured nut blocks. You will have to drill them out after you print it. The support is 0.2mm…

Downloads
11
Likes
0
Rating
0
P
Printablessatre

Railcore Belt Tensioner

Belt tuner for the Railcore. Slide the lever behind the X or Y motor at the very top of the stepper body as pictured, then use an M3 bolt to secure the lever to the bracket. Gradually tighten until the Y rail is perfectly parallel to the…

Downloads
11
Likes
0
Rating
0
P
PrintablesMatt W

Railcore Vibration Damper Mount (non-Halo)

Remixed/redrew the original mount to fit inside the aperture on the aluminium mounts that come with the Filastruder Railcore kits. Print Settings Printer: Railcore 2 300 ZL Rafts: No Supports: Doesn't Matter Resolution: 0.32mm Infill: 18%…

Downloads
11
Likes
2
Rating
0
P
PrintablesEmpiricus

Wyze Camera Mount for Railcore II /15mm Extrusion

Just a mount for a Wyze camera. Can be mounted from the front as shown with metal plate glued in or on top of the side extrusions without metal plate inside. Prints without support. Changed the mount so that it is flush with the front…

Downloads
11
Likes
3
Rating
0
P
Printableswouldstain

Railcore Cover Interface w/ filament pass-thru

Modified jstevewhite's cover interface for railcore to allow the use of a PC4-M10 push-fitting on the inside of the printer so filament could be fed from the outside. Print Settings Printer: Railcore 300ZLT Rafts: No Supports: Doesn't…

Downloads
10
Likes
1
Rating
0
P
Printableswarpster

Railcore magnetic door latch

This is a magnetic latch for a railcore. It uses 4 qty - 1/2" (12.7mm) X .063" (1.6mm) magnets from Home Depot encased in plastic covers to minimize the magnetic force. The stationary part holds 2 magnets and then screws down into the…

Downloads
10
Likes
2
Rating
0
P
Printablesjubs

Railcore II Spool Holder

This spool holder is a remix of a remix of a remix :) Its for the Railcore II printer. It requires a short length of M6x100 threaded rod and 4 M6x100 nuts. Use two nuts to secure the rod into the spool arm (alternatively you can thread in…

Downloads
10
Likes
0
Rating
0
P
Printablesparalepsis

Bottom panel for Railcore electronics box

Print with no top/bottom and honeycomb infill for a nice look.

Downloads
10
Likes
1
Rating
0
P
Printablessatre

Railcore II 300 ZL X-rail Height Adjuster

NOTE: The STL scale is 10x normal so scale in your slicer to 10%. Sorry I can't fix this easily as I lost my f360 timeline, but super easy for you to compensate on your end. For those of us who just can't quite get the Railcore perfectly…

Downloads
10
Likes
1
Rating
0
P
PrintablesRacenviper

0.25 inch Thick Side Panel Mount for Railcore II

Redesigned to work better with US 0.25 inch thick side panels. Category: 3D Printer Accessories

Downloads
10
Likes
0
Rating
0
P
Printablesplc268

Railcore Cable Loom Angled PTFE tube holder for M10 (1/8 BSP) fitting

Update, May 3, 2020 The previous version of this part had an issue where the ptfe tube could ratchet through the fitting during a print, shortening the overall wire bundle and thus causing skipped steps or breakage. The printed part now…

Downloads
10
Likes
1
Rating
0
P
Printablesplc268

Railcore II Belt Holder for aluminum carriage for square nuts

I made a modification to the belt holder assembly for the railcore to replace the use of heat insert nuts. Now there's a slot for a square nut to slide in to create threads for tensioning the belts. Since the threads are much closer to…

Downloads
10
Likes
1
Rating
5
P
PrintablesThehead

Railcore LGX toolhead mount for filament sensor using Euclid probe and V1.1 1lc toolboard

please see the original model for instructions. This model uses many heatset inserts. Feel free to modify the design as needed (the .step file is attached). Keep in mind this is for the V1.1 revision of the 1LC board, if you have a…

Downloads
9
Likes
1
Rating
0
P
PrintablesCynical Owl

Railcore II Cooling Fan Modifications and Add-ons

Railcore II: Cooling Fan Modifications and Add-ons Update 5/15/2020 - making major revision, pulled files until I can update thanks I made a few mods/add-ons for the Railcore II cooling fan(s). As of now the most popular/effective fan is…

Downloads
9
Likes
1
Rating
0
P
Printableswouldstain

Railcore M8 adapter for universal spool holders

Replacement screw insert to support M8 threaded rod-based universal spool holders. It is essentially just a cut and rejoin of the spool holder part from wwendorf's thing (below). Uses frame mount from: Filament Spool Holder for Railcore…

Downloads
9
Likes
3
Rating
0
P
Printableswouldstain

Railcore bed pivot offset laser calibration aid

Warning: This project, as designed, calls for a 650nm 5mw laser. NEVER POINT A LASER AT ANYONES EYES, INCLUDING YOUR OWN, EVER! That means using proper safety equipment and being aware of reflective surfaces. BE SMART. BE AWARE. BE…

Downloads
9
Likes
5
Rating
0
P
Printableswarpster

Railcore Wire Cover

Just a simple wire cover for the Railcore printer. Thiis was designed around the BondTech printed mount and will clear a BLTouch. You will need to drill out the top and bottom inside Wire tie square holes with a 4mm bit. I designed it to…

Downloads
9
Likes
1
Rating
0
P
PrintablesJared

Railcore II Magnetic Bed Alignment Pins

These alignment pins are for use with the Railcore II magnetic bed, MandalaRoseWorks Aluminum Z Yokes and Thekkiinngg 300x300 powdercoated build plate. The buildplate itself is not thick enough/magnetic enough to stay in place, so these…

Downloads
9
Likes
0
Rating
0
P
PrintablesEmpiricus

Railcore II 300ZL cable guide

Cable guide for my railcore 2 build. Snaps into the front right bracket that is part of https://www.thingiverse.com/thing:3290533 . Empiricus@Dremomys Print Settings Printer: Railcore 300ZL Rafts: No Supports: Yes Resolution: 0.150mm…

Downloads
9
Likes
0
Rating
0
P
PrintablesEmpiricus

Inline Duet3D IR filament sensor for Railcore II

Print head top for adding a inline Duet3D IR Laser filament sensor to the Railcore II Y carriage for E3D Titan Aero and Blower Shroud thing:3206498. Set a wide range of 2%-130% as even with one particular filament the measured distance…

Downloads
9
Likes
0
Rating
0
P
PrintablesEmpiricus

Railcore II Filament holder

Filament holder for Railcore 2 300ZL and some brackets. No support in the post required. Added brackets and base for left side holder. New right side base and support to better deal with 3.5kg rolls. Ad spool holder thing:2431785. This…

Downloads
9
Likes
0
Rating
0
P
Printableswarpster

Railcore top lid support clip

These are "lid supports" for the top lid of the Railcore top made by Mandala Rose Works.. They get mounted on the side extrusions of the Top Enclosure and give a little extra support for the middle of the lid. They are in two pieces.…

Downloads
8
Likes
1
Rating
0
P
Printableswarpster

Hemera Filament Sensor Mount for Railcore

This is a mount for the Duet Magnetic filament monitor for the Hemera on a Railcore. The STLs are oriented for proper printing and should not require supports. Where supports are needed I added an integral supports (2) that need to be…

Downloads
8
Likes
1
Rating
0
P
PrintablesLein3D

Palette mount - Railcore II

This is a palette mount that uses the electronics case cover holes to mount the palette.

Downloads
8
Likes
1
Rating
0
P
Printablessatre

Railcore Anti-Crash Z-stops (RACZ)

These safety Z-endstops for the Railcore 300ZL trigger an emergency stop when the bed goes higher than it's supposed to (also known as a crash). These switches will stop all motion, acting faster than you can, and will help prevent damage…

Downloads
8
Likes
0
Rating
0
P
Printablessatre

Railcore Aluminum Y Carriage Belt Retainer for Nuts and Heatserts

This is a remix of https://www.thingiverse.com/thing:3423355 by Patrick Crawford and of https://www.thingiverse.com/thing:3597877 by Emma Puggle. Be sure and print with the thin side down as Emma Puggle suggests for the maximum strength.…

Downloads
8
Likes
0
Rating
0
P
Printablesrbjam

Railcore rotated Z yokes

In the original Railcore II design the X axis travel is limited by part of the Z yoke blocking the heatsink fan on the low side of the X axis. On the high side of the X axis, is the part cooling fan that collides with the the Z yoke. This…

Downloads
7
Likes
0
Rating
0
P
Printablesveng1

RailCore Foot with clearance hole

The additional hole allows access to the screw in the corners. Print it with the largest side down, not like the CAD picture. Category: 3D Printer Parts

Downloads
7
Likes
0
Rating
0
P
Printablesveng1

Railcore Z_Rotation_Flag

Press or screw onto the right Z axis lead screw. Tells if the Z axis has stopped turning or how much it turned. Is slit so it fits even if your printer is not quite tuned to size. A shorter version is for the ZLT as the wobble in the z…

Downloads
7
Likes
2
Rating
0
P
PrintablesEmpiricus

Railcore II Proximity Probe Fan Shroud for E3D Titan Aero

The IR probe was not leveling reliable with my PEI bed. I added an NPN Omron inductive probe I had around instead. Much better now. These probes have a working distance of 8mm in an M12 form factor, that is about 4mm for Al. Twice the…

Downloads
7
Likes
1
Rating
0
P
PrintablesEmpiricus

Railcore II Y carriage for E3D Titan Aero and Blower Shroud

This is a new Y carriage for the Railcore 2 to use the E3D Titan Aero extruder and a new blower shroud using the EBM-PAPST RLF35-8/14N 5cm blower. Also included is a mount and cover for an IR auto leveling sensor. Tested and working…

Downloads
7
Likes
1
Rating
0
P
Printableswouldstain

Railcore Drag Chain Cover friendly inside rail mount

Modified rail-mount piece for cynical_owl's railcore drag chain ends to be cover-interface friendly. Print Settings Printer: Railcore 300ZLT Rafts: No Supports: No Resolution: .1 Infill: 15 Filament: Atomic PETG Starry Night Notes: I've…

Downloads
6
Likes
1
Rating
0
P
Printablesveng1

RailCore AL Belt Retainer with Support Blocker

This is a remix of the Aluminum Belt Retainer as designed by Tony Akins. Because I had problems with printing this in PETG initially, I designed a support blocker that prevents the internal supports from touching the rectangular side…

Downloads
6
Likes
1
Rating
0
P
PrintablesEmpiricus

Some Railcore II parts for z motor attachments

Some parts that maybe helpful as reference. These are used to reinforce the Z motor mounts included are some covers and a bracket to help setting the distance between the Z axis. Empiricus@Dremomys Print Settings Printer: Railcore II…

Downloads
6
Likes
0
Rating
0
P
Printablesveng1

RailCore Spool Holder to Fit 3 Across

This is a hack of a J Steve White stl to allow three spools across a 300 mm wide RailCore. It is screwed to the 15mm rail and includes a hole for a filament guide. Print one standard and one mirrored. It was specifically designed to allow…

Downloads
4
Likes
0
Rating
0
P
PrintablesMatt Smith

Railcore Fan Shroud for Volcano and Aluminum Mount

I seemed to have a unique situation already with my railcore setup somehow. I could never find a model for a fan shroud that fit the mounting hole spacing so it required modification or just brute force to fit properly. When I upgraded to…

Downloads
2
Likes
1
Rating
0
P
Printables

Daedalus 2024 Update Project (RailCore II)

Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…

P
Printables

Railcore Fan Shroud for Volcano and Aluminum Mount

I seemed to have a unique situation already with my railcore setup somehow. I could never find a model for a fan shroud that fit the mounting hole spacing so it required modification or just brute force to fit properly. When I upgraded to…

P
Printables

Railcore II ZL X LDO Smart Orbiter V3 X Euclid probe mount

I've included a STEP file of the whole assembly for your reference For more info go to Smart Orbiter V3 Extruder: https://www.orbiterprojects.com/so3/ Euclid Probe: https://euclidprobe.github.io/ Cheers and happy printing! __Yves