901 models
08/2025: Updated 3D models for the screw and the center piece. The screw is now hollow! With this parts you can convert your empty Prusament spool to a Masterspool. I tested several other Prusament to Masterspool adaptors, but none of…
Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant
This is a basic refill cap for a Dettol NoTouch cartridge. It is designed to cover the entire top of the container. This way it is possible, to cut a hole in the entire bottom of the the refill cartridge, and the cutting does not need to…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
The idea is simple - just print the 2 parts. The first insert screws into a 20 mm hole that you drill into the top of the empty container. I would recommend to glue it in with some super glue or 5 minute epoxy to secure and seal the fit.…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
“reduce, reuse, recycle” Verschlussstopfen für gebohrtes 10mm Loch. Macht den Seifenspender nachhaltig nachfüllbar. Schont die Umwelt, spart Plastik und Geld. Looks nice with Prusament Crystal PETG *Anwendung auf eigene Gefahr,…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Filamentive introduced a new spool core. This is significantly smaller than the original refill spool. Printed in PETG at 0.2mm layer height.
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for PETGSource material: PET
AzureFilm has a nice idea where you can just refill spools - IF you have a spool which is refillable, unfortunately I had one that was made from just 1 piece, not the one that can be taken apart. So I decided to design this part in…
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for one variant
This model is based on an normal version (2 wall layers) of a Tactical Ballpoint Pen https://www.printables.com/model/412788-tactical-ballpoint-pen. I adjusted it for use with Pilot G2 refill. I also added a small protrusion, to which you…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Compatible with refills with inner diameter of 100mm and width 60mm (eg. SmartMaterial). Press-fit installation - There are two holes to install screw inserts, but they don't match the holes in the spool sides. Print in PETG - Settings…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for PETGSource material: PET
Lets you check visually your stock. No more empty boxes in the fridge. Vials fit snugly in the recesses. Holds 25 vials.
Print approx. €11.86–€14.50 excl. taxPreliminary estimate for one variant
Don't throw your money on expensive refill items and enable you to refill using unbranded soap instead by drilling one arbitrary sized hole and after refilling cover it with this lid.
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
What this is These are refill spools with various midsection diameters. One side of each version has a 30mm x 60mm rectangle to stick the filament label to. (Print data of this model and render in gallery shows the ⌀82mm version) General…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
…Marre de payer une fortune pour des filtres à charbon actif à mettre dans la fontaine à eau ? Voici le modèle qu'il vous faut ! ^^ → Démonstration en vidéo J'achète le charbon actif en sachet de 1 litre ( ici ). J'ai de quoi renouveler…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
DONT USE THIS USE V2 https://www.printables.com/model/608357-turn-you-esun-spool-into-a-refill-spool i wanna safe money and buy refill fillament but don't wanna print a whole spool so I designed this you need to saw a spool in half and…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
I created a funnel for the Bluecup nespresso refill capsules with wich you can directly use your coffee grinder for the espresso machine The funnel snaps in the holder without glue
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
Spool has multiple slots to attach filament
Print approx. €5.51–€6.73 excl. taxPreliminary estimate for PETGSource material: PET
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Printable model of the Prusament spool for Prusament Refill system. If you cannot use your old Prusament spool, it is possible to print this reusable spool and put the refill on it. The model is made to fit the Prusament Refill spool . -…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…
Prefer print thread area for layer height smaller 0.16 for the overhang of thread, 0.12 will be great. I use varies layer height in superslicer, I print other layer at 0.22 height. I use ABS so I can put the spool in the filament dryer.
These are some butane lighter refill adapters/nozzles. The nozzles that came with the can of butane never fit my lighters quite right, so I made my own. I had the best results when they were printed with a 0.25mm nozzle. Note that there…
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
A clean rhythm for daily brews. This modular, refillable tea bag dispenser is designed to balance functional clarity with thoughtful form. Tea bags load from the top and dispense smoothly from the bottom, echoing the efficiency of a…
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
This simple spool is used to eliminate the need to throw away a filament spool each time you purchase filament. Filament refills are readily available and easily drop onto this refillable spool. Print spool parts A and B and put them…
Hi, I made this adapter to use the refill filament from esun on the Bambu refill spools, made these with snug tolerances so when using the AMS the filament doesn't spin freely and cause an issue. Edit: Added a new version that allows you…
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
A refill adapter to fit my lighters.
Spool for using with Rosa 3D filament refill. Print twice push it firmly to the both sides of filament refill.
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…
About This is a lightweight universal reusable spool for refills that screw together and center the refill core, using thin flexible tabs. They're used for centering but not to fully hold the spool so make sure you screw the two spool…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…
Print the funnel upside down (like a pyramid) with no supports. You will need to rotate the disk back and fourth as you fill. You can brace the funnel against the PowerDisk by pushing on the part of the print that extends next to the tip…
A fully printable refillable disc notebook! Compatible with half letter, junior, or A5 refill paper (common size refills for 8 disc planners like TUL, Circa, Arc, or other Discbound systems). I used a Happy Planner hole punch to create my…
lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.
Litter Locker replacement cartridge that's easier to refill and hold 3rd party bags. Onshape Design:…
Update Version 1.3 - 27.02.2026 A scale was added to the B side to better estimate the remaining amount of filament on the spool OpenPrintTag ready: The shape was slightly adjusted (B side) and markings were added for easy attaching an…
This is my entry for the FormFutura Refill Master Spool Design Contest. To challenge myself I wanted to design a spool that consists of two identical parts, no supports, no separate printed parts for connecting the two halfs and no…
Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…
Give your filament refills a second life with this reusable 3D-printed filament spool! Designed for spool-less filament refills with an 82 mm inner cardboard core diameter , this spool features two threaded halves that can be assembled…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
Einfach bei der Sagrotan-Flasche oben ein Loch reinsägen, Deckel aufkleben und mit dem Verschlussdeckel verschliessen. So spart man viel Geld :-) Verschluss benötigt Support.
This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…
Hereby I release my AIO ReFill - Masterspool aka (All In One ReFill - Masterspool). after having a lot of annoyances in the industry by companies releasing and re-releasing or resizing their refill spools I thought this is enough… so I…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
A spool holder for Bambu filaments that looks just like the original spool. This spacing shim is designed to preventing the spools from reopening on their own.
Didn't like how much filament was wasted on the original Spectrum Refill design, so remixed it with a more simple, but stil useful side. Original at https://spectrumfilaments.com/en/refill/ Print Settings Printer Brand: Creality Printer:…
Das passende Filament findet Ihr unter https://www.3d-printiverse-shop.com/
I increased the inner diameter to 54mm and changed the thread. Thread tolerance = 0.35 mm so calibrate the flow rate beforehand. Material used = ~150 grams Edit: 22.11.2024: Now the whole model can be printed without support. added thread…
Introducing the Hexagonal Spool for Prusament Refill. It's not just your regular spool, it's six times cooler. And with its hexagonal shape, you'll never have to worry about your spool rolling away from you like a disobedient pet. It's…
Reusable model for Bambu lab filament refill
Made out of Rosa3D PET-G (not a surprise ;)) weights around 57 grams and takes 2,5 hours to print in 0.24 layer height and some speedy profile setting. The project keeps flat surface for a label sticker, yet lacks the graduation for…
This is a 3d printed journal that is very easy to make. It uses standard 8.5" by 11" printer paper, making it convenient to print custom pages on an old fashion 2d printer. Just adjust the 2d printer settings to print 4 sheets per page…
This is a bottle I made for making filling my small Speedloaders more conveniently. Just pour BBs insinde the bottle or use it as a shovel inside the BB bag, put on the lid and fill your speedloader. Use the cap to close the bottle and…
None of the adapters which came along with the gas cartridge fitted my kitchen gas torch, so I quickly modeled a working one in Fusion 360. Inner diameter base: 3mm Inner diameter torch: 2.25mm Modify the Fusion 360 sketches to your needs.
Needed a spacer to take up the gap between the cardboard and the spool. This is for Bambu Spools that fit the AMS and Microcenter Inland filament refills. I printed from PETG with 3 walls and 20% infill, PLA should work fine.
This adapter allows perfect fitting of Fiberlogy Refill filament bundles onto Bambu Lab Reusable spools, or self printed spools that have the same size and notch as those of Bambu Lab. It has cut-outs to allow the tie-wraps go in and cut…
I love Prusament and their refill spools. I tried refilling the spools using the method they suggest (by re-using the injection molded spools) but found that it would not go on properly and wobble while printing. That led me with wanting…
2 Piece Reversible Design works with ANY mini spool. Benefits of this design over all others found... simple 2 piece threaded, fast and easy to print Compatible with... - Creality CFS, Bambu AMS, any filament drier, center hole to hang on…
I made this remix to make the holder dry the desiccant efficently. With a better chance for airflow. No support needed.
This is a custom box for Lamy T10 ink refill cartridges. There are two versions, one for 5 cartridges and another one for 9. They have an opening on the cover, so you can quickly check how many cartridges are left and which colors they…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
DampRid Container. There are 3 parts: the container, the tray, and the lid. Fill the tray with the DampRid crystals. The tray then sits on a shelf within the container to keep it raised up so water can collect on the bottom. Added a…
I couldn't find any replacement carbon filters like the standard one that comes with the K1C, so I designed this to be refillable with activated carbon pellets. The lid snaps into the base, and is easy to open when its time to replenish…
This is a master spool designed by myself with inspiration with some others that are available. It fits on a 200x200 print bed. It has multiple holes to reduce the filament cost when printing, It also contains 3 filament storage paths on…
Spool for Cusian3d filaments from the GST3D brand, This is the second version, tested on AMS Systems and machines without the same system, with perforation for 40mm and 50mm spool holders FDM: 3 Walls 3 solid layers TOP 3 solid layer…
Use this jig to hold the shocks of your 1:8 RC Car while you refill them and let the bubbles rise :-)
This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…
For the new refills with holes in cardboard. My master spool is compatible with AMS Lite, if someone tests it with AMS I'm waiting for feedback.
Introducing Refill Masterspools, the ultimate solution for 3D printing filament. With over 16 years of experience in 3D printing and product development, we at 3DP have created what we belive is the best refill masterspool. Our focus on…
This adapter can be used to use Refill Filament from eSun on the printed or the original spools from Bambu Lab. The adapter is simply pushed on the side with the small nose on the split spool. The bulge of the adapter must be placed on…
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
V1.0 (09.06.2023) Minimalistic DAS FILAMENT refill adapter - Just 40g material required, based on our “ little masterspool ”
This is a design of a screw on fitting to transfer toothpaste from one tube to another. There are 3 different designs, as I found while creating there are 2 different size screw tops on toothpaste tubes. It is also random on which brands…
Remix of Rosa3D refill spool holder, to make it more aesthetically pleasing
I designed a little adapter to refill my DSG transmission according to VW specs. I happened to have a peristaltic pump laying around with an inner diameter of 4mm and outer diameter of 7mm. So I designed this adapter to fit the same tube…
I designed this spool cause I couldn't find a suitable one for my needs. It doesn't rely on a perfect fit for a specific spool cause of the chamfered side. Print settings don't really matter but keep in mind that if you want to dry that…
My half can of WD 40 ran out of air. Instead of throwing away all that product, I refilled the can with 90 PSI of air. I have included the Fusion 360 file so you can adjust the size of the aerosol can's nozzle to your liking. I have it…
This is only a slicer setting change on the original file from FormFutura Technical Design By: Chrizz | Printables.com https://www.instagram.com/es_chrizz https://www.thingiverse.com/chrizz/designs
I made these holders for our dish scrubbers at our apartment Note - the refillable soap one will only work with the replacement sponge heads, for some reason those are totally different than the first head that comes with the scrubber.…
Edit 17-6-2023: Thread has been made stronger and made more easy to place the bottle. The bracked now has an extra screw hole and fits better with the bath. Description: New version of the automatic bath. Fits standard soda bottles for…
Refilling oil on the Honda Jazz/Fit can be a pain because of the location of the opening. This skewed funnel solves that. I use it on a Honda Jazz 2008-2015 generation but it could probably also fit (hehe) other models, please let me…
Print out of heat resistent and foodsafe material if you use hot ingredients.
REFILL cívka pro náhradní plnění PWS filamentů. Reusable REFILL spool for PWS filaments.
Another take on the Thermacell Refill Adapter ✅ Includes FreeCAD and STEP files ✅ Fits standard store-bought butane cans ✅ Seals tightly against original Thermacell gasket ✅ Minimal leakage during refill I designed yet another version of…
Redline Filament Refill Spule
About This is a universal reusable spool for refills that screw together and center the refill core, using thin flexible tabs. They're used for centering but not to fully hold the spool so make sure you screw the two spool halves tightly…
Filamentspule aus zwei Passteilen für die Aufnahme von z.B. eSun Refill-Filamentspulen. Benötigt werden außerdem: 2 x Innensechskantschraube M5 x 60 2 x Mutter M5 Den Druck habe ich mit den Voreinstellungen 0,2 (SPEED) des Prusaslicers…
With this ReFill System you can store your filaments that are without the stands on the side!
