1,800 models
This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Hexagon styled seedling planters 3 heights to combine for visual esthetics or different plant needs. Easy to fill when connected due to reduced spill over. Careful release by gently pushing up the bottom inlay. 13 pieces fit one standard…
This is a tougher and easier to print quick release version. I made this mainly with face masks in mind but its good for all kind of applications. Print instructions You can print this with your standard setup. The only thing you might…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
Quick and easy replacement for OEM hood release that tends to get brittle and snap after a 35+ years of use. I made this shorter and stubbier than the original to hopefully be more sturdy as the old cables can require a lot of leverage to…
A must-have tool to help you conveniently pickup the various metal objects in your work space, and then easily drop them where they belong via the quick release handle (can also be used as a “transfer magnet”) . All parts are designed to…
I searched for a quick-release filament gripper/clipper that would meet my needs, but I could not find one I liked, so I created a versatile three-way clip. I did not like how an unused filament held on the spool guide of my MK4, as it…
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through…
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket. This makes it very unlikely to be found should an accident render the electronics unresponsive which could be deadly. This model…
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Update V4: Closed a small gap in the bottom part. The plug of the PSU quick-release cable is not nice to look at with the exposed cables. It looks much nicer with a housing! Fits the MK3S+ and the MK4 version oft the cable. I know, there…
Wire Release for Holga 120N Camera Should fit for the most standard Wire Releases, mine was for Nikon
very easy to print hook releaser, make the line in the open ring and go with the releaser in the mouth of the fish. you need a little bit tension on the line for easy release. when you got the technic it’s very simple. you have a perfect…
Dice Tower | One-Armed Bandit with Functional Lever for Dice Release This model remindes of a one-armed bandit in the casino. You roll the dice inside the tower. When you pull the lever, the dice fall out and you can see the result! The…
Update: R2 version has an arrow pointing in the direction to move the tool to reach Neutral (N). This model is a tool to manually release the park pawl on a ZF 9HP transmission, used on 2020 or newer Honda Ridgelines. A ½ inch ball valve…
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
This is a quick release tripod adapter for Akaso action cameras. Akaso is similar to GoPro, but the “tongues” on the Akaso mounting hardware are thinner than the GoPro hardware. I modified the original model from tmorris9 on Thingiverse…
Give your fingers a break while one handing your Kindle.
Quick release desk stand for Alley Cat's T-Beam V1.1 Case.
Owners of the original Prusa enclosure and the Quick Release for the MK3S+ add-on have probably noticed that the LCD display has to be removed, and the cables unplugged every time the MK3S+ is removed from the enclosure. This little…
A doorstop where you don't have to bend down to get it in place or try to position it with your feet. The door glides over it when opening and is released by pressing on the top of the doorstop. Prints in place as one part using a…
This project includes three versions of the 3D-printed Manfrotto 500PLONG quick-release plate, designed for use with Manfrotto video tripod heads. These models are compatible with the 500PL system and offer options for different printer…
The easiest way to attach, carry and fast detach keys from a lanyard or other carrying solution. It uses 5x10 round neodium magnets. I used one in each half but because the neodium magnets are so strong you may only use one magnet that…
Hook for a glass shower wall up to 8mm thick, for fixing a towel or washcloth. The towel can be inserted into the hook from above with the corner. To remove, the towel can simply be pulled down. Thus, the hook does not accidentally detach…
There are some designs available, but not one fitted good enough for me. So I created my own, including a release mechanism, like the original Electrolux parts have. You will need the following to put the model parts together A ballpoint…
Growing Pot - Quick Release - Vase Mode Minimal material, maximum growth: easy-to-print growing pots in various sizes. To remove the plant, simply press the bottom slightly. My girlfriend uses these growing pots, from tiny seeds to…
I couldn't find any GoPro quick release mount for Camrock TH70 so I designed this using upper part from GoPro Tripod mount by tmorris9 ( https://www.thingiverse.com/thing:81333 ) The base at the bottom is 39.6 mm exactly. Tips: print with…
Piriformis & Psoas Release Tool Unlock targeted relief and soothe deep muscle tension with the Piriformis & Psoas Release Tool . Designed to simulate a therapist's knuckles, this ergonomic tool applies precise pressure to hard-to-reach…
Unlock targeted relief and soothe deep muscle tension with the Piriformis & Psoas Release Tool . Designed to simulate a therapist's knuckles, this ergonomic tool applies precise pressure to hard-to-reach muscles in your hips and lower…
This attachment makes it easy to attach and remove the camera quickly from the Hasselblad tripod quick coupling H mounted on top of tripod. You only need camera 14" screw. My design is compatible with screw that was made by…
When the Prusa PSU quick-release is used, the pass-thru is useless and another hole in the enclosure to be closed. This model covers the pass-thru hole from the inside. It is simply snapped between the PSU and the back panel over the…
This is a quick release plate for the Fidelity Electronic FTP-1. Used a standard, 1/4-20 UNC Screw that fits most cameras, was threaded so no need for glue. Print Settings: PLA 0.30 mm (make it 0.2 it if you want it prettier but slower)…
Now that I've switched from the MK3S+ to an MK4S, I needed another Quick Release for the Original Prusa Enclosure. There are already a few quick releases for the MK4S on Printables, but I wanted another one like mine for the MK3S+ . This…
Quick release cable, IDC Connectors holder Post connector for 26 Pin. Schnellverschlussverbindung, IDC-Steckerhalter, Pfostenstecker für 26 Pin Die awh 24g-e202-idc 24 Pin steckerleiste sind schwer zu bekommen darum bau ich sie aus 26 Pin…
Print instructions material: PET-G is strong enough, ABS would be better, NYLON is the best infill: 100% for PET-G suports: yes layer: max 0.2 mm Print all parts in horizontally, all layers must be in 90° to the longitudinal axis to avoid…
Adapter for an old mechanical wire release for the movie button. Clips securely onto the camera without glue or screws. Normally I use the smartphone remote app but it does not work in the HFR-mode.
Alternative Quick release adaptor for Korum system
I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…
Spare part - releaser of Christmas Tree Stand Example link: https://www.therange.co.uk/christmas/christmas-decorations/tree-decoration
My button broke at the hinge, and instead of buying a new vacuum cleaner, I tried to CAD out to new button. This is one of my first parametric designs and hence the angle of the button's "swoop" does not match the original, but it does…
Currently best working print (thru Creality) : 6 wall loops Rectilinear Top & Bottom layers 50% sparse infill - Gyroid Did not need supports You could orient so the Actuator Rod is printed length wise. Will give update once I have tried…
EN Every reusable VITE cap thrown away is money lost. This tool is designed to quickly remove broken stem remnants trapped inside Raimondi VITE caps, allowing them to be reused instead of discarded. What would normally be a tedious manual…
Hero Me Gen7.4 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across 3D printers, hot ends, extruders, ABLs, and other components. The Hero Me Gen7 is all about choice and personal…
Toilet paper version here ( Exclusive model for members ): https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r A paper towel holder with a print in place mechanism and quick release and load…
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
This is my remix of Jesses side release buckle over on Thingiverse: https://www.thingiverse.com/thing:312961 The male part now fits either way, also it is scaled down quite a bit from the original and the edges are rounded a little for a…
These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…
Printed with easy ABS. I also added an editable file to make it easier to modify. I used 1 x M6 furniture connector bolt (picture added). I hope it will be useful for you. For those who want to use only the screw and nut (without…
Quick Release Buckle Clip (backpack & belt Clip)
This model combines the functionality of both an AMS PTFE tube and cable release tool into one simple small part. Can be stored hanging behind the end of the cable (see photo) ≤0.2mm layer height. 6m45s print time Also available on…
This hook releases its load if you turn the little lever on the side. The force you need for this is independent from the load wight. If you attach a smaller rope to it, you can trigger it from a remote position or from the ground.…
Note: This model, design, and rendering was done by Arron_mollet22 . You can find this listing on Thingiverse . Reposting under the Creative Commons - Attribution - Non-Commercial - Share Alike license. I did not see this posted here yet,…
Allows you to take a small monitor or graphics display tablet e.g. Wacom Cintiq 16 off of a standard monitor arm and put it back without needing a screwdriver or precise alignment of the mounts due to the self-aligning dovetails. You'll…
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
I used it to create a rag holder myself — model here: printables.com/model/1203133 But I'm curious to see what other people might use it for :) Instructions Print solid, with supports, in PETG or similar. Use “raw” filament for hinge…
A simple burger patty press designed to be strong enough so you can really pack your patty tight. The bottom is removable so your burger just pops out. Waxed paper separator discs in a variety of sizes are readily available on Amazon.…
Ever since stumbling upon buckle designs made specifically for 3D printing I kinda got stuck on the idea of developing my own. So this is my first official attempt ;) All parts are designed to be printed without supports. You can mix any…
Tripod hızlı bırakma plakaları evrensel değildir. Bu, en çok kullanılan ebatlı üründür. @Farklı ebatlarda ürüne ihtiyacınız varsa @en geniş yan ebatlar 44*44mm
Second type has a tight cap, to hide the srews. (you can remove it with a screwdriver) And one dust cap for the wheel. Watch the name convention, 1-2-3, find the file name connections beetween brackets and letters.
Designed this to help my kids to unbuckle themselves and it's also a great aid anyone unable to depress the seat buckle release. Print Settings Nozzle Size: .4 or .6 Layer Height: .2 (.4 nozzle) or .4 (.6 nozzle) Infill: 20% Material:…
version 2 is out and its smaller then ever!! Introducing the super cool Quick-Release Picatinny Rail Mount, a game-changer in the world of firearm accessories. The quick-release allows for easy changing of accessories or adjustment on the…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
mixed the quick release (thanks DerrickDarrell) with my front Y bracket Update: New version added - bracket moved to the left about 13mm to give more room to be able to use it with wider bins than mine. See picture from spitfire in makes.…
Hi, This is my take on a tool to help release filament from the gears in the CFS's 4 way hub. This is useful if you experience a jam and need to manually retract the filament back to the CFS. The position and firmness of the motor release…
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Strong quick-release square pipe clamp For 20x20 mm square pipes. Scale proportional for other dimensions. I may add more sizes. Included variants for horizontal / vertical attachment of accessories (with M5 screw hole). You could remix…
I designed this toilet paper holder with a quick release system. You just need normal setting for printing but it does need supports although they should come off fairly easy. Then obviously, you'll need to screw it to the wall. If you…
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
What even is this? If you're interested in a sturdier card box that uses more filament, check out Dre Wizards Stackable Trading Card Drawer . I designed this one from scratch with their design in mind (same internal drawer dimensions).…
Printer brand: Creality Printer: Ender-3 S1 Pro Supports: Yes Infill: 50 Filament brand: Sunlu Filament color: Black Filament material: PLA+
Strong quick-release tube clamp - fully printable I built this for fun, based on my Quick release clamp for square pipes as it may be useful for round pipes too. For tube diameter 33,7 mm. Scale proportional for other dimensions. You…
Perfectly sized pins for my MMS designs or your Picatinny products! They're designed to be held in by tension. And if printed correctly, they'll hold very well until specifically pushed out when needed! ///These Pins Need To Be Printed…
This was designed to be very minimalist and a quick print. Feel free to make and sell these if you want but please be sure to give me credit for the design. My truck is a 2010 F150. But I know it works for multiple years near mine at a…
Made this to wall mount my NRG Quick Release steering wheel when not in use. Printed at >50% infill No Supports needed Use 4x wall anchors to mount into drywall.
A tight side-release buckle for 25 mm straps. Final dimensions (width x length x thickness): 31 x 67 x 9 mm Do NOT use in places or situations where life depends on the device! It was not load tested. Print Settings Printer Brand: Prusa…
This is a quick release connector! To open it, push the middle ring upwards! To close it, insert the lower connector into the upper one and slide the middle ring down! Quick and strong hold! Print settings: Infill: 75% . Support: No Layer…
3d printed quick release This masks were given to us by our employer. They are very nice but putting them on is kind of tricky. This quick release makes it much easier! There is a .step file if you want to change it to your needs. Print…
Want your young kids to be more self-sufficient and get out of the car on their own? This allows for them to be able to unbuckle the lower buckle of a car seat on their own. Ideally only given to kids who are mature enough to not unbuckle…
Cable chain? Umbilical? Introducing the SwingArm! We love to innovate and we constantly improve our existing printers. Even with the tight time constraints in the development of the CORE One, we reworked a vital part of the printer before…
*** DISCLAIMERS: This is our first 3D print, and we might not always know what the best 3D printing practices are. If you are more experienced, feel free to adjust the files if needed. Some components can be a bit snug. It might be a good…
A better way to attach your t300 wheel and you can skip the annoying screw.
Easy release hook, holds very well when under weight, didn't properly test it, but it can hold several kilograms easy. To build it, you need: 2x Screw A 1x Screw B (optional) 1x Screw C 1x Hook A 1x Hook B 1x Clamp (dual screw version for…
This is custom GoPro mount for my friend's special order. The idea was to mount GoPro base in front center. It works fine and get a best possible camera angle. I will post better pictures of real print soon ;) Skechup file included - feel…
After an extensive search for a suitable heat set insert tool online, I was unable to find one that met my requirements. Inspired by various sources, I decided to design my own tool, utilizing 3D printed components and readily available…
Update 2022-05-12: Design tweaked for the V3 again after some feedback from folks. Personally tested on both Rapidfire + TBS Fusion modules! Update 2022-04-02: MAJOR DESIGN UPDATE! V3 adapter has been overhauled to successfully fit other…
Umbrellas are the best way to stay dry on a rainy day, and their main downside is that one has to hold it. This model solves this by making your backpack hold your umbrella for you ! Also works with sticks or other long and thin objects…
This is the second version of the Quick-Release Picatinny Rail Mount. The V2 is about 40 percent smaller by volume then the V1. The quick-release allows for easy changing of accessories or adjustment on the fly. This thing is fully…
3d printed quick release for corona face masks. This masks were given to us by our employer. They are very nice but putting them on is kind of tricky. This quick release makes it much easier! There is a .step file if you want to change…
A new type of quick-release clamp designed to slide and lock on aluminum t-slot extrusion. With this fully printable model you can build bar clamps of arbitrary size and mount multiple clamps on the same bar. Minimalist/functional by…
Have you ever dropped your Nintendo Switch or bumped your joy-cons too hard or just worn them out and they won't latch anymore when you plug them in? Well majority of the time, the little plastic piece hidden on the backside of the…
This is a tilting style mousetrap with an adjustable magnetic release for a snap action. The counterbalance weight is also adjustable. I designed it to work with pennies, but the two threaded plugs can sandwich any type of mass and allow…
This replaces the housing core part of the Annex Engineering's Sherpa Mini Release 2 extruder to accept an ECAS coupling for the reverse Bowden feed. Has non-round geometry to allow printability and minimal force to push-in. Other designs…
*05.12.2024 I just noticed that on the rear part of the Long Levers, some dimensions are too tight/ not how i want them
I made some modification of model by dede67, his model has the same thin walls like original (which is originaly made from ABS), such thin walls is is easy to crack (around the holes). My remix add some material around the holes and the…
Use PETG or possibly ABS/ASA (PLA does not flex well enough). Designed to be printed without support. Note that one of the pieces should be reversed when connecting them.
![[REMIX] Side Release Buckle](https://media.printables.com/media/prints/893197/images/6954021_bcb3ca3a-2941-4485-b2c8-8efc9394b770_1937b2a9-331b-4a86-a6f8-c3370d38a7c7/remix-srbuckle-1-1.jpg)
