Search results: reser

Sort order

525 models

P
PrintablesMaesgd

Twisted planter _270 with integrated water reservoir ( onepiece _ No support)

2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…

Downloads
603
Likes
147
Rating
4
P
PrintablesvmLOGIC

Toilettenpapierhalter mit Reserverollen / toilet paper holder with spare rolls

Für die Grundkonfiguration mit einer Reserverolle sind folgende Modelle erforderlich: The following models are required for the basic configuration with one spare roll : 1 x Rollenhalter 1 x L-Form oben links 1 x L-Form oben rechts 1 x…

Downloads
150
Likes
49
Rating
0
P
Printablesafp316

1986 - 1989 TRX Foreman/Fourtrax Reserve Fuel Tank Lever

This works as a replacement reserve fuel valve petcock lever with part number: 16952-HA7-880ZA. I built the model with a sacrificial 0.2 mm layer where the hole transitions in order to force the slicer to build a bridge there. Just poke…

Downloads
58
Likes
5
Rating
0
P
PrintablesLaHo

Reservoir to toilet connection

Connect reservoir with the toilet. PETG or ASA may be better, but in white I have PLA now. Print straight pipe as many times as needed. Supports needed only for Elbow90.stl. All parts printed with brim. Update 20240201: added Elbow90_V2…

Downloads
25
Likes
0
Rating
0
P
PrintablesTJDesign

Bean reservoir (hopper) extension Philips Saeco 1200-5500 (latte go) series

Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…

Downloads
2,693
Likes
162
Rating
4.72
P
PrintablesMeyui

Komori Planter with Reservoir

Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…

Downloads
2,272
Likes
963
Rating
4.71
P
PrintablesKalleKnall

OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…

Downloads
1,632
Likes
146
Rating
4.88
P
Printablescimoalpacino

Wiper Washer Reservoir Cap (TPU print)

Windshield Wiper Washer Fluid Reservoir Tank Bottle Cap (For Peugeot and other cars). Printed in TPU (230/50), without supports. Included Solidworks file for editing and customizing :) Print instructions Category: Automotive Summary…

Downloads
1,065
Likes
80
Rating
4.75
P
PrintablesPetos Safarik

Bees water platform to drink with bottle reservoir

I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and…

Downloads
957
Likes
391
Rating
5
P
PrintablesNordlicht

IKEA Samla 22L Dry Storage Box with Silica Reservoir

I wanted a simple storage solution for spare filament spools that utilizes the widely available IKEA Samla 22l Storage box with lid and keeps the filament dry during storage. To keep it as simple as possible, the spools can rest directly…

Downloads
736
Likes
151
Rating
4.91
P
PrintablesAneoPsy

Coolant Reservoir Cap

I created this Coolant Reservoir Cap to replace my broken one Thread: ISO M33x3 ⚠ Use PETG or a plastic that can withstand higher temperatures. BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support needed…

Downloads
622
Likes
30
Rating
5
P
PrintablesVedicFutura

Vishnu - The Preserver

Vishnu is the one of the three principal deities of Hinduism - Brahma the Creator, Vishnu the Preserver and Shiva the destroyer. Vishnu is the god of Preservation, the great maintainer who often appears in various incarnations (avatar) to…

Downloads
575
Likes
46
Rating
5
P
PrintablesRT3D

Ford Focus 2012 Windshield Washer Fluid Reservoir Cap v3

I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…

Downloads
565
Likes
69
Rating
5
P
Printablesyurshevich

Citroen C4 (2009) Car Washer Reservoir Tank Windshield Replacement Cap

Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…

Downloads
555
Likes
78
Rating
5
P
PrintablesRT3D

Ford Focus 2012 Windshield Washer Fluid Reservoir Cap

I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…

Downloads
492
Likes
57
Rating
5
P
PrintablesMaesgd

Twisted planter with integrated water reservoir ( onepiece _ No support)

A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…

Downloads
491
Likes
124
Rating
5
P
PrintablesPtitloup34

Cap for Peugeot / Citroen reservoir windscreen washer

My neighbour lost his cap on his 106 peugeot. I design it and install it, works fine, clips good on tank The flange is too hard but you have to smooth it with a lighter. I design with an hole but dont see on print, too small so i drilled…

Downloads
464
Likes
42
Rating
0
P
Printablesrvsuper8

Brake fluid reservoir cap

Standard Euro E20 thread. Started with another cap but the others had issues. So I made one from scratch. Needed a vent cut out and center protrusion for factory gasket support. Need to be a bit beefier to prevent cracking of the cap.…

Downloads
461
Likes
12
Rating
5
P
PrintablesKnexFour

G1/4 Plug For PC Water Cooling, Radiators, Pumps, Reserviors

As the original author stated, this is not for use in loops . This is for keeping your gear clean and protected in storage.

Downloads
378
Likes
32
Rating
5
P
Printablesnielsie645

Gaggia Classic Pro water reservoir cover with 58mm tamper holder

A replacement water reservoir cover with a place for two 58mm or 58.5mm tampers. For the Gaggia Classic Pro. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15%, doesn't really matter…

Downloads
377
Likes
64
Rating
5
P
PrintablesTimATX

GMC Windshield Washer Fluid Reservoir Cap

Replacement cap for my reservoir on my 2014 Sierra. I printed mine in TPU for flexibility.

Downloads
371
Likes
41
Rating
4.5
P
PrintablesLångburken

Reservoir cap for bleeding brakes.

Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze. Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of…

Downloads
324
Likes
18
Rating
5
P
PrintablesAdncoils

Fresero dental

Fresero giratorio, con un rodamiento de 12 mm x 18 mm x 4 mm, fresas de diámetro 2,3 mm. También funciona bien sin rodamiento.

Downloads
310
Likes
13
Rating
0

Windshield Reservoir cap for BMW vehicles

Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG. Fits E30, E39, Z4, and other models. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…

Downloads
308
Likes
57
Rating
5
P
Printableskoen

OPEL Astra J washer fluid reservoir cap 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.

Downloads
305
Likes
24
Rating
5
P
Printablesmultivir

Paragliding Reserve Packing Board

I needed a packing board for my reserve - so I drew one. It fits the build plate of a Prusa i3 MK4 exactly Things to consider: This is much lighter than a wooden board. You can use an anti-slip mat or a weight to reduce the board from…

Downloads
299
Likes
21
Rating
5

Modern spherical flower pot with water reservoir and water level indicator

Your mint died again because you forgot to water it… We all have been here many times. It's sad but you have to move on, speaking of moving on… Move yourself to your slicer and print this beautiful pot, i know you want it! (or at least…

Downloads
278
Likes
118
Rating
0
P
PrintablesNone None

Ypso pump insulin reservoirs holder

3D model of a YpsoPump insulin reservoir holder — a custom-designed holder to securely store and organize YpsoPump insulin reservoirs. Features a compact and stable design with individual slots for easy access, safe handling, and…

Downloads
272
Likes
18
Rating
0
P
PrintablesRadu20

Ford Fiesta MK6 Windshield Fluid Reservoir Cap

My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…

Downloads
271
Likes
19
Rating
5
P
PrintablesOtto Rasmussen

SAAB 9-3 Washer Fluid Reservoir Cap Dual extrusion

I did a remix to be able to either replace the logo with whatever or print it with extruder 2 using another color. It worked out nicely. Also it is possible to print the cap itself with the flat top now facing the print bed. That way, it…

Downloads
260
Likes
23
Rating
0

Wischwasserbehälter Deckel / Windshield Washer Reservoir Cap for BMW E30

UPD. Infoced the version with icon. Designed a suitable and improved windshield washer reservoir cap model for BMW E30, instead of the one published by Exotechd. His design is very beautiful and concise, but unfortunately, it doesn't fit…

Downloads
258
Likes
24
Rating
0
P
PrintablesShay

Windshield washer fluid reservoir cap for Suzuki Splash

Print with TPU, 3 or more walls, 0.2mm layer

Downloads
245
Likes
22
Rating
4.67
P
Printablesnilok

ISO Station - With Large, Hidden Reservoir

EDIT: Added 2 example pics with glass to demonstrate the hidden tank and the smaller tank auto-filling. I love my various ISO Stations and used similar plastic containers in college labs, but that was a long, long time ago.....and I have…

Downloads
235
Likes
39
Rating
5
P
PrintablesAlex A.

Mazda washer fluid reservoir cap

This is a washer fluid reservoir cap made for Mazda CX-5. After a quick google search I found out that this should be compatible with other Mazda models. I used PETG for it, but you could use ABS or other material that is resistant to…

Downloads
234
Likes
20
Rating
0
P
PrintablesOzzieOrca

Camelbak reservoir drying hanger

Hanger I made for drying my Camelbak Lobo 100oz/3 liter CRUX Reservoir. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.21875 Infill: 22 Filament: Monoprice PLA+ Black Category: Sport &…

Downloads
230
Likes
26
Rating
5
P
PrintablesJani Sivonen

Saab 9-5 Washer fluid reservoir cap

Washer fluid reservoir cap with griffing logo for saab 9-5 Tested on 1998 9-5, reservoir changes atleast on 2006 so this might not fit. There is two versions of this cap, one has a tighter fit and other looser. Print with supports logo…

Downloads
219
Likes
14
Rating
5
P
PrintablesConair

Fallout 3 - Pulowski Preservation Shelter

Nachbildung des Pulowski Preservation Shelter aus Fallout 3

Downloads
211
Likes
34
Rating
5
P
Printablesnielsie645

Gaggia Classic Pro water reservoir cover with hinged lid and 58mm tamper holder

25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…

Downloads
205
Likes
29
Rating
4.5
P
Printableswedgeworks

Salt Gun Reservoir Lid

I really do love this thing. Florida has a lot of flies. About 6 months after purchasing “it broke.” You know, as in, “no one knows who did it they just found it like that.” I've been keeping it attached with duct tape like a peasant. Now…

Downloads
197
Likes
14
Rating
0
P
PrintablesJoshua Chanez

PC reservoir clamps for water cooling 50mm

used for holding a water-cooling reservoir

Downloads
187
Likes
30
Rating
5
P

Brake / Clutch fluid reservoir cover

Covering the "urine cups"... Coverings for ugly brake and clutch fluid reservoirs Made for a Triumph Tiger 1200 (2022-), Maybe it fits for others too. The cover has a viewing window to keep an eye on the fluid levels. Brake fluid…

Downloads
187
Likes
4
Rating
0
P
Printablesmcbeenb

Thermaltake The Tower 900 Pump Mount Adapter for EK-Quantum Kinetic Pump/Reservoir

This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…

Downloads
185
Likes
9
Rating
0
P
PrintablesHabit

Coolant reservoir bracket for Nissan S13 / 180SX / 200SX / 240SX

Did you remove your fuse box from the engine bay and are now realizing that the oem coolant reservoir was mounted to that fuse box? Here is your solution!

Downloads
185
Likes
23
Rating
0
P
PrintablesFlo

Tool for VW Common Rail Diesel Engines Oil Filter Drain Reservoir (13 mm) Golf 7 and others

With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…

Downloads
178
Likes
22
Rating
5
P
PrintablesLoXiRe

Suzuki Splash / swift Wiper Washer Reservoir Cap (TPU print)

Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)

Downloads
176
Likes
9
Rating
5
P
Printablescwennet

2011 Volvo S40 Windshield Washer Fluid Reservoir Cap

Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…

Downloads
169
Likes
17
Rating
0
P
PrintablesDouwe

Spanner for dishwasher salt reservoir

The salt cap of Bosch (and other brands) dishwashers notoriously gets stuck because of solid salt forming below it. This spanner eases reopening the reservoir to fill with salt.

Downloads
161
Likes
22
Rating
5
P
PrintablesSumofThis

2026 New Years Eve Table Topper with Optional Reserved Card Holder

This is a centerpiece for a New Year's Eve party table or tables with an optional card holder for reserving the table or adding note or menu for each table. Prints flat. Numbers are large so use a small infill of about 5% or so. Check out…

Downloads
159
Likes
19
Rating
0
P
Printablesz4h0n

Ford washer fluid reservoir cap

Clicks in, stays on. Print with supports Recommended materials - ABS, ASA, PETG or similar- PLA not suitable for engine bay use. Suitable substitute for 1250896 , 3M51 17632 AB etc. Tested on a Ford Galaxy Mk.II 2007

Downloads
158
Likes
12
Rating
0
P
PrintablesTojik

Brake reservoir lid for Shimano M355

If your brake reservoirs crumple, you may be using an automotive brake fluid (dot 5.1) in your brakes. This will destroy them and many plastic things along the way. I learned the hard way. For these brakes, use mineral oil only. Hi, my…

Downloads
157
Likes
7
Rating
0
P
PrintablesPaulden2745

Coolant Reservoir Cap

Coolant reservoir cap replacement, compatible with Nissan Altima 2012

Downloads
156
Likes
9
Rating
0
P
PrintablesAprinta-me

"Reserved" plaque for restaurant tables (ask for more languages)

This is a simple plaque for reserved tables at a restaurant. 120 mm long (resize at your taste). Use layer change feature to get the letter contrast. Languages available: -English -Portuguese -Spanish

Downloads
153
Likes
19
Rating
0
P
PrintablesKompV

Honda CRV 2nd gen windshield washer reservoir cap

Windshield cleaner water cup replacement. Print with TPU.

Downloads
153
Likes
28
Rating
0

Brake Reservoir Cap

This brake reservoir cap was made for a Chrysler Pacifica, but may work with many other makes/models

Downloads
152
Likes
5
Rating
0
P
Printableszenon Zenon

BOUCHON RESERVOIR LAVE VITRE 407 PEUGEOT

S'imprime très facilement en TPU, pas de support. Paramètres utilisées: buse 0.4 10% remplissage 4 parois Jupe bordure non nécessaire

Downloads
151
Likes
14
Rating
0

Insektentränke V2 Insect drinker with reservoir

Insektentränke V2 Insektentränke mit Reservoire. Marmeladenglas, "Bonne Maman", Erbeere :-), 77.60 mm Aussendurchmesser, zzgl. Gewinde. Das Gitter lässt sich mit Justierschrauben auf die richtige Höhe einstellen. Achtung, die…

Downloads
146
Likes
29
Rating
5
P
PrintablesPYC3D.ES

RESERVED TABLE SIGN 100% CUSTOMIZABLE WITH DIFFERENT TEXTS

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE RESERVED TABLE SIGN 100% CUSTOMIZABLE WITH DIFFERENT TEXTS -This design features 2 main pieces, the base and the stand. The base is fixed, but the stand is interchangeable, designed to…

Downloads
146
Likes
28
Rating
0
P
Printablesippe

Reserved sign - MMU

Friend of mine had a problem of loosing the table whenever she was alone in a restaurant and went to bathroom…she asked me to design this. I tried many different designs, but ended up with printing the sides flat to the print bed and then…

Downloads
144
Likes
15
Rating
5
P
Printablesmethanejuice

TF2 Reserve Shooter (Nerf silly shell blaster)

If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This uses the Breacher + Preacher kit, plus some additional HW for the Reserve Shooter attachments: M3 heatset inserts QTY 4 M3 x 20mm SHSC QTY 5 #4 Self tap Small…

Downloads
141
Likes
142
Rating
0
P
Printableskrkan

Silica Reservoir Lid

I found this great design from https://www.printables.com/@Nordlicht and printed it for my IKEA box. but i use 1kg loose silica gel and the openings in the lid were a little too big for it. so i made small change. sorry, it's my first…

Downloads
138
Likes
7
Rating
5
P
PrintablesBeaver

Mazda 3 Windshield Wiper Fluid Reservoir Cap

This is a replacement cap for your windshield wiper fluid reservoir. Fits the 2015 Mazda3, and probably many other models of cars.

Downloads
138
Likes
11
Rating
5
P
PrintablesQuatchi

Fruchtfliegenfalle für 80er Weck Glas (fruit fly trap for Weck preserving jar)

Fruit fly trap for a Weck preserving jar (80mm lid). The jar should contain something that attracts the fruit flies (e.g. old fruit, water/vinegar mixture). The fruit flies follow the smell through the funnel into the jar, but then cannot…

Downloads
138
Likes
14
Rating
0
P

Novorapid insuline penfill adapter for Minimed pump reservoir

I designed an adapter for NovoRapid Penfills to more easily fill the MiniMed pump reservoir.

Downloads
138
Likes
14
Rating
0
P
PrintablesHarnik3d

Tesla Windshield fluid reservoir full cap

I reverse engineered the original cap which was broken at the joint. I tested with PTFE and TPU. - PTFE has a better fit and look , but fatigue is untested. TPU fits well and will last longer. Print with 3 walls - 15% infill Supports…

Downloads
137
Likes
8
Rating
5
P
PrintablesMakangry

The VAG windshield washer fluid reservoir funnel

-- EN version -- VAG windshield washer fluid reservoir funnel (Volkswagen, Seat, Skoda, Audi...), 40 mm diameter. Printing instructions: Print with 100% infill. No need to use support if printed upside down. If you like this item, you can…

Downloads
129
Likes
19
Rating
5
P
Printableschickenbeef

Gaggia Classic Pro Water Reservoir Lid

I printed it in PLA, 0.2 layer height, 3 walls, 5 bottom/top layers and 25% infill.

Downloads
128
Likes
18
Rating
0
P
PrintablesModel Magic

Reservoir Dogs - Mr. Pink & Mr. White - 1992

Reservoir Dogs - Mr. Pink & Mr. White - 1992 3D printable model.

Downloads
124
Likes
34
Rating
0
P
PrintablesCornbread

Windshield Washer Reservoir Cap

Windshield washer fluid reservoir cap I made to replace the ugly blue ones that come on the cheap aftermarket reservoirs on Amazon. Similar to this one:…

Downloads
119
Likes
14
Rating
0
P
PrintablesTinkerTiger

Ford Focus (2011) Windscreen Wiper Fluid Reservoir Cap

I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…

Downloads
117
Likes
17
Rating
0
P
PrintablesReed Bowman

Toothbrush holder jar lid for Bonne Maman preserves jars

A simple toothbrush/razor holder using Bonne Maman jars, which I think are common and identical across Europe and North America.

Downloads
111
Likes
43
Rating
5
P
PrintablesRico

Honda Africa Twin 1000 CRF Rear brake fluid reservoir guard (3d Printer and Laser cut)

You can buy these guard from the UK (34€ + delivery), but it´s very expensive. So I made my own ^^ . The 3d model was only the prototyp (after two paper modells), that it fits propertly. I make it a bit stronger, so you can use it instead…

Downloads
108
Likes
9
Rating
0
P
Printablescepps

Hoover Power Scrub Deluxe Carpet Cleaner Reservoir Cap

One of the reservoir caps got lost in a move and it's easy to splash water or cleaning solution when using the carpet cleaner without it. I'm still very new at making anything and this was made using TinkerCAD. I'm pleased that it's…

Downloads
108
Likes
2
Rating
0
P
Printablesshermluge

Hanging pot with reservoir

My wife wanted some hanging pots that held water better. This is a design I came up with for her and it has been working great.. This is the fat style I've also designed a thin style for ivy ans such. This one has a grill at the bottom to…

Downloads
108
Likes
27
Rating
0
P
PrintablesBuldozerUA

Water cooling reservoir holder for a PC

Рolder for PC water cooling reservoirs with a diameter of 50mm

Downloads
108
Likes
21
Rating
0
P
PrintablesSunBerns

Reservoir Caps for Honda Goldwing

I needed a flat reservoir cap for my Honda Goldwing so that I could mount a phone holder on it. After I printed the first one I decided to put the Honda logo on it. Then I made one for both sides. This was designed for a 1997 Honda…

Downloads
107
Likes
4
Rating
0
P
PrintablesManimal

USA Trains EMD NW2 roof mounted Air Reservoirs

Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive. The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and…

Downloads
106
Likes
9
Rating
0
P
Printablessimkeh

MT07/FZ07 Brake Reservoir Cover

This is a cover for the brake fluid reservoir of the MT-07/FZ-07. It should also fit on the Mt-09/FZ-09.

Downloads
106
Likes
18
Rating
0
P
PrintablesMurulz

EK Reservoir Mounting Bracket for 120mm Fans

I made this bracket for mounting an EK 200mm reservoir to a 120mm fan while using the fan pump mount. They don't include a way for you to secure their reservoirs to a fan out of the box. So I whipped this up so I could have a clean and…

Downloads
105
Likes
13
Rating
0
P
PrintablesRick269

BMW E92 washer fluid reservoir cap

Just a replacement washer fluid reservoir cap for a BMW E92. Insert included if you would like to print in a contrasting colour. Recommend printing upside-down, flat on the print surface. I know these are cheap to buy but “I can 3D print…

Downloads
103
Likes
19
Rating
5
P
PrintablesHazardous

Seedling Planter Box with Water Reservoir

Easy to use 3 piece print with attachable water reservoir and removable seedling planters for drainage/replanting.

Downloads
100
Likes
26
Rating
0
P
Printablesmikrom

Water Tank Reservoir Handle for Saeco/Philips - Exprelia/Lirika | 996530007587

The design is meant to be used with M6 screws from the rack. It was originally printed in PLA, which turned out to be stronger than the original material. Update : The PLA did not withstand the stress, and I encountered difficulties…

Downloads
98
Likes
4
Rating
0
P
PrintablesUnndf

Mitsubishi Eclipse Brake/Clutch Master Cylinder Reservoir Cap 4625A161

Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…

Downloads
97
Likes
5
Rating
0
P
PrintablesKilberisch

Flowerpot Reservoir and Drainage Insert

This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…

Downloads
97
Likes
17
Rating
0
P

A1 mini Z linear rail lube oil reservoir

While lubricating the Z linear rail on the A1 Mini some time ago I discovered a serious problem. The oil eventually ended in the components parts due to its viscosity and also gravity. While I know most of the lubricating oils are not…

Downloads
97
Likes
19
Rating
0
P
PrintablesA_R_B

Rescue Reserve Button (quick pressure closure or normal sewing)

Just another nice button. Can be sewn normally, or - if there is no time or no accessories - quickly attached with pressure for an emergency. Maybe not for permanent use, but enough until home, or until the day is over. Use Nylon or ASA…

Downloads
95
Likes
36
Rating
0
P
Printablese1miran

Gaggia Classic Pro water reservoir cover with hinged lid and 58mm tamper holder and WDT stand

A remix of nielsie645 's excellent replacement water reservoir cover with print-in-place hinged lid . This integrates the stand for jkim_makes ' popular WDT tool .

Downloads
93
Likes
12
Rating
5
P
Printableslivius

PET bottles water reservoir + funnels

It is underground water reservoir for plants. I have been using a similar solution for years. But previously i have used hot glue with real funnel ;-) Now i have 3d printer so i have designed fast to print and cheap version, all in one.…

Downloads
92
Likes
16
Rating
5
P
PrintablesJase Heuer

Anycubic Photon Mono X Resin Bottle Reservoir

This is a redesign of a resin reservoir made by Matteo Cibelli. I replaced to top of his vat with a threaded portion to put a standard Anycubic resin bottle on. To create the air tight seal i sed 2 silicone o-ring around the neck of the…

Downloads
91
Likes
18
Rating
0
P
PrintablesMerlin

t:slim X2 Reservoir Füllhilfe

Das Model ist entstanden um Parkinson Patienten dabei zu Helfen das Reservoir der t:slim X2 zu befüllen, da es sehr schwer sein kann mit der Nadel den Einfüllpunkt zu treffen. Dazu wird der Tank bei eingeklappten Zustand in die eine Seite…

Downloads
91
Likes
17
Rating
5
P
PrintablesCecu Pauta

Mitsubishi Pajero/Montero/Shogun brake fluid reservoir cap

This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun). I suspect this would work for other Mitsubishi cars. I have made this out of ASA, however I believe that brake fluid…

Downloads
89
Likes
5
Rating
0
P
PrintablesSnafky

Coffee machine Philips Big Beans reservoir EP3550

I love my Philips Coffee machine but only the bean reservoir to small. Therefore i created a bigger one! This thing fits the Philips EP3550 Enjoy! Please donate and don't make money of this object!! (RESPECT THE LICENSE) Print…

Downloads
89
Likes
16
Rating
5
P
PrintablesMrCitizen

Osprey hydraulics reservoir dryer

I designed this hook and oval “thing” to thoroughly dry out your Osprey hydraulics or similar hydration reservoir. To use, blow into the bite valve to clear out the hose and then dump the remaining water out of the reservoir. Insert the…

Downloads
88
Likes
16
Rating
5
P
PrintablesIntelligisnt

PC reservoir clamps for water cooling 50mm - 120mm fan mount

i just modified this to allow mounting to a 120mm rad or fan, holes are sized at 3.5mm

Downloads
84
Likes
7
Rating
0
P

bouchon reservoir lave glace Peugeot 307

Bouchon lave glace Peugeot 307, fermeture par aimant. A cliquer sur le tuyau du réservoir lave glace. Il faut 2 aimants d'épaisseur 2mm et diamètre 5mm. Un axe de diamètre 2mm et longueur 18mm. Print Settings Printer Brand: Creality…

Downloads
80
Likes
2
Rating
0
P
PrintablesPhoryan

Hexagonal Plant Pot with reservoir

-Self watering planter- This is Self watering Plant Pot I made using similar designs I found on other designs on thingiverse. My pot uses a hexagon design as its a simple design as well having good properties of strength while still…

Downloads
79
Likes
22
Rating
0
P
PrintablesRightiousNewb

Modular Reservoir Caps for Dice Molds

This is my master blender file for creating reservoir cap dice molds. A reservoir cap is the terminology I use for the raised platform that a die sits on to create a reservoir in the cap of the mold when it is inverted. Documentation is…

Downloads
79
Likes
9
Rating
0