S500 Drone Frame
Modelled from a kit similar to this (https://goldenkoltsova.blogspot.com/2019/10/holybro-s500-v2-pixhawk-4-480mm.html) Frame is quite accurate - but not all parts tested.
- Downloads
- 711
- Likes
- 20
- Rating
- 5
149 models
Modelled from a kit similar to this (https://goldenkoltsova.blogspot.com/2019/10/holybro-s500-v2-pixhawk-4-480mm.html) Frame is quite accurate - but not all parts tested.
Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous…
This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…
A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-Function-Constant-Voltage-Current-Step-down-Power-Supply-Module-p-1161704.html?p=2@3021069489201207MV It has support for…
What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…
Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…
Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous seasons. Description My V1-wheels solved most of my issues that I had with the original Bosch wheels but there was 1 problem that I…
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! History These are the 3rd iteration Indego wheels I've designed, always learning from previous models. First…
I beefed up and shortened the sides on the original and made a couple of mounting brackets. Front cowel mount uses an M3 threaded insert in the center and the rear tab is secured to the rear inside of the canopy using the short extended…
A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…
In my household, sockets and switches of the Jung AS500 series are installed. To be able to use my Hue Tap Dial switches with it, I have designed an adapter, which can be inserted precisely into a Jung AS500 frame. By backplate and M3…
Suzuki GS500 (E) Front Fender. Modeled this for my cafe racer-esque bike. Tested to work with a 1996 model. It is designed in a way where you do not need to remove any parts to install it. it uses the stock mounting holes. I used black…
Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…
Suzuki GS500 1996-2006 Cover for Clocks Skechup file included - feel Free to remix and share Category: Automotive
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
printed with 0.8 nozzle, 0.2mm layer height and 10% infill in PETG black. Print time about 27 hours (both wheels) gedruckt mit 0,8mm Düse, 0,2mm Layerhöhe und 10% Infill in PETG. Druckzeit ca. 27 Stunden (beide Räder)
I just did a very small remix of the card box design by js500 (thanks for providing the scad files!). I just did not like the additional “Guilds” label and I changed the order of the slots, such that the guild cards are the last slot. I…
I needed an enclosure for the the PMS5003 Particle sensor that would meet my needs: slanted roof so rain/moisture rolls off mesh covered inlets to prevent critters from making a home inside anchor points for screwing into a pole / wall…
A tiny, portable adjustable power supply based on the DPS5005 power supply module. Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest…
Wheel for lawnmover with hubcab that screws in Print instructions: see .3mf file Note: Make sure that the center is solid otherwise it will break! Remix of this model https://cults3d.com/en/3d-model/home/wheel-bosch-indego-350-400
This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are…
Most likely works for 1989 and forwards GS500E, GS500 models. Take measurements before. Included is the .step file for modification. It is friction fit into place (no visible mounting holes on my headlight assembly. For my specific…
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…
This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for…
Permet de maintenir une perche universelle plus large que celle d'origine
needs no brim, no support cut of the circles after printing It screws into the original screw behind the speedometer. Display: https://de.aliexpress.com/item/1005005548122637.html Gearsensor:…
Remixed to change the respective sizes of the wells for the soil tokens
Housing that is just big enough to fit an old laptop power supply and the DPS5005 . The laptop power supply can only output 18V / 3.25A, for my normal electronic projects that is plenty enough. I Have a 50V/5V version, but the main…
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…
This is my first design of a bench power supply base on a DPS5005 and a 36V 5A Power Supply Module. Update: 03.10.2022 I have added a V2 Version of the two part. They are much stronger and the fitting of the power plug screws is better…
Box with lid for my PM2.5 monitor with PMS5003 and D1 mini pro
The Suzuki GS500 3D model is a detailed miniature recreation of the iconic street motorcycle. Supports needed - auto Removing supports - extra careful.
This is an enclosure for a DPS5005 voltage converter with Bluetooth and supply board 230V AC to 36V DC. For higher load of the DPS a fan 60x60x15mm was installed, but I also provided a cover without fan. The fan cover is for the inside,…
Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…
I wanted the series of switches in black, but I can't get them anymore, so I drawed them.
This is a universal rail mount for the S500 drone frame. Use zip ties to secure whatever you want on top and / or bottom. I mounted a VTX and a telemetry module side by side, with one slot left at the bottom. Print Settings Printer Brand:…
This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…
About Designed for environmental monitoring, Enviro+ for Raspberry Pi lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. When combined with a particulate matter…
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
Made some intake trumpets for the Suzuki GS500E, but should fit on any Mikuni BST33 carb ;) Printed in PCTG
I dropped my radio about a foot off the ground and the original volume knob just shattered into pieces. This led to me searching for a replacement part. I was shocked at the prices. (Not really, Motorola stuff is really expensive) This…
Hier mein Modell für ein Tankgummi für die Suzuki GS500 e. Wird mit TPU, 10 Infill, 3 Außenlinien gedruckt. 0.28mm Layerhöhe und 0.2mm Düse. Erfüllt seinen Zweck sehr gut.
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
Flight Controller or 4in1 ESC mount for the Holybro S500 drone frame. Standard 30.5x30.5 Stack Layout It slots into the frame slots in the bottom of the frame and I have it held in with 3M tape All you need is four 10mm M3 bolts Due to…
Used Hot Glue to keep components in place
TiltBox for DPS5005 Simple and functional enclosure for the DPS5005 variable power supply, designed to make it easier to use and look good on your workspace. Features Angled Display : The DPS5005 module is tilted for better visibility and…
This bird spike ring is designed for the Ambient WS5000 rain gauge. I had one from the manufacturer with 16 spikes, but the birds would land in-between the spikes and deposit their droppings to plug up the gauge. This is a rather large…
Should fit for the universal 6 Gear indicators you can buy on aliexpress with centered holes. Mounted it with some screws which i found randomly in the all famous srew box. Mounting is also little tricky as the holes are covered. Got it…
Print with the rail mount holes perpendicular to the build plate. This will ensure that the holes are a perfect circle and won't cause issues during mounting. Use Tree Supports (Auto). Only needed under the camera mounting floating area.
Simple box to hold a DPS5005 (link here: DPS5005 ) on a DIN rail. I mounted all my tool holders and stuff with a DIN rail on the underside of a custom made bench, so I needed something to hold everything on it. The banana connector used…
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…
This case holds the power supply at an angle for desktop use. There is a spot on the back for an XT60 connector for the power input. There are two holes on the front for banana screw terminals for the power output. There is a spot in the…
I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…
This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…
These parts often break and it's nice to have a quick replacement part. This connects the 16 mm diameter carbon down-tube of a quadcopter to the frame.
POCKET SIZE 3D PRINTED ENCLOSURE Enclosure was design for DP modules like DPS5005, DPS3003 The ones without additional board. I decided to add small fan, but the board dont requaire one, so this is optional. As you seen on pictures, I…
Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…
This is the final version 2.4 Tire So why, my be love robot slipped all the time when he drove over certain plates in the garden. The reason why he did that was, cause the friction of PLA to low. So I printed the tire in TPU. It was / is…
This is a pegboard mounted power supply using a DPS5005 power supply module. This is designed to be as compact as possible, so you don't have a ton of room to work inside. You should wire everything up before you put the module in, since…
Small adapter to mount a Ikea TRÅDFRI Shortcut-Button to JUNG AS500 frame (Rahmen 3-fach Jung AS500 583 WW alpinweiß). I use a 6mm magnet to hold the button in place and 4 screws (M3 6mm) to fix the adapter into the Jung AS500 frame. Have…
Shorter sleeve allowing to fit a BB-RS500 in an 68mm bottom bracket without spacers
This frame can used to adapt a lan-jack cover on a Jung AS500-series-frame.
This safety switch holder can be installed on any one arm of the S500 or S550 quadrotor frame. It works with the screws
This is a case for A pico enviro+ with a PMS5003. it takes four 3mm heat inserts and M2 x 3mm Full Thread Cap Head Screws and two wall screws to fix it to a wall.
Simple but powerful laboratory power supply from two DPS5005 modules and 47V industrial LED power sources. 2019-01-18 Added modification for single DPS (vertical and angled variant) Print Settings Printer: Molestock Rafts: No Supports: No…
Used for a s550e that had a missing bracket when it arrived. You can use fusion to adjust it for your toilet. I printed mine in petg 100% infill. Seems sturdy, can really crank it down.
My copy of Kanban EV came with one extra copy of each wooden part, including the cars. I store these in the “player-aids-and-misc-storage” part, but two of the cars (blue and silver) are too tall to fit in the bowl under the player aids.…
Remix of rainbow_wheez3's outdoor enclosure for the Plantower PMS5003 Particle Matter Sensor https://www.thingiverse.com/thing:4581351 I wanted a bit more wiggle room for the WeMos D1 Mini control board and cables. This is part of my…
Case for generic gear indicator that can be mounted on top of Suzuki GS500 dials. It’s an old motorcycle though the shape itself could possibly fit on some similar dashboard. There are two models - with and without Suzuki logo embossed on…
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
This dummy armada insert for https://www.printables.com/model/455606-7-wonders-second-edition-insert-organizer-fits-edi in case you don't have the Armada Expansion yet. The size adapted for 235x235 build plate.
Mein Tacho hat in der Halterung gewackelt, deswegen habe ich diesen Distanzring entworfen. Leicht zu drucken, einfach unter das Gummi von Tacho und Drehzahlmesser montieren.
I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
Scenario and Adversary card trays of js500's Spirit Island insert to fit them being sleeved.
This model can be used as a case in s500 frame
Hier mein Modell für ein Karosseriegummi für die Suzuki GS500 e. Wird mit TPU gedruckt, 0.2 Düse, ohne Infill, zwei Wandlinien.
Modified the map tile holder and tray 2 to fit the slightly larger pieces used in the newer Ravensburger game edition. Original card holders still work and tray 1 is unnecessary because there are no new expansions, the rest of the files…
I remixed the original backpanel to accommodate a female XT60 connector, so that I could use the DPS5005-based PSU with https://www.printables.com/model/322597-lrs-200-power-sleeve that I have built quite some time ago as a universal…
This is a storage tray to use with js500's excellent Unconscious Mind insert to hold the two "Locations Rails" without a playmat. If you don't have (or, like me, ever use) the Meeting Table playmat, you might find this helpful.…
These are simply aesthetic changes/additions to this lovely insert. Most can be glued into position with superglue. Designed to be printed at 0.2mm height most are 4 layers thick (two layers per color). The exception are the tyrant box…
This cover can used to mount a f-type connector from tv-cables in Jung AS500-series.
POS5000 ssd adapter. Adapter for 2.5" SSD drive for POS5000. I adapted source model for the case of POS5000 in a way that you can safely plug SATA cables. Printed using PETG filament with 15% infill.
A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar. Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection. The fit…
BOM: 120mm Fan (up to 25mm height) 4x screws M3x30mm for 120x25mm fan M3x20mm for 120x15mm fan (low-profile/slim) 4x Heat set insert M3x5x4 (3mm ID, 5mm OD, 4mm Length) 4x 6mm magnets (optional, model has a slight friction fit) You can…
Use WEMOS clone ESP32 D1 mini to control PMS5003 and BME680 sensors. Both are included in Tasmota all sensors. 2 cases included: one WEMOS ESP32 and with both sensors and one with WEMOS ESP32 and BME680 only.
This is a spacer insert if you dont own the armada expansion yet. Print the same file two times. The size is 119x130x14mm Fits the 7 Wonders (Second Edition) Insert / Organizer by js500 Inspired by Vladimir Gamalyan 's dummy insert.
This is the 3D-printed case from my build of a local PM1.0/PM2.5/PM10 air-quality sensor that reports straight into Home Assistant via ESPHome – no cloud, no app. What fits inside: - ESP32 DevKit - Plantower PMS5003T (particulate matter +…
Cap for xiaomi mijia shaver s500, If your original cap is broken, like my. "я сделяль"
Remix of a DPS 5005 Case. Added DC Connector with 11mm diameter. Added cutout for USB Controlboard. Case is 30mm longer.
After I installed my screen door (and created holes in my doorpost) I found out the door rubbed ever so slightly onto my floor mat. I recreated the stationary hinge and added some height offset so the door could clear the mat. I also…
Worx Landroid Robot S500 i Upgrade Type of the Robot WM105_Si The mega Upgrade Front Spoiler Back Wheels 2.1 RIM 2.2 Tire 41mm 2.3 Tire 70mm / Diffrent veriations ------->>> 2.4 FINAL TIRE most improved…
According to ChatGPT, the 44511‑27E00 or my variant main_vibration_damper should fit: Suzuki GS500 (naked) - GS500 K1 -K6 (2001–2006) Suzuki GS500F (faired) - Models K4, K5, K6, K7, K8, K9 (2004–2009) Suzuki Bandit Range - Includes Bandit…
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
To assemble the forks, you need a tool to hold the damper rod and torque the damper rod bolt. I used this in a Suzuki GS500e but you can use it in any motorcycle that has a 24mm damper rod. Before using, insert the tool in the damper rod…
This holder is designed for the Philips S7000 electric shaver and is most likely also compatible with the S5000 series (not tested yet). The shaver rests horizontally in the holder, which makes it ideal for shelf storage or inside…