4,766 models
'Safe from the Rain' is a string artwork with a space under the umbrella to slot a figurine of your choice. It prints without supports Print at 0.2mm layer height and if using Bambu Studio set your wall generator to Arachne. You can…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
3D printed version of the Nomad MagSafe charging stand. Pause mid-print to insert 3 ASC ¾" washers for weight in the base.
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
I got excited about Apple iOS StandBy Mode and designed a stand with the following in mind: Minimalistic , functional design, compatible with any iPhone model. Suitable for desks (as companion) and bedside tables (as alarm clock).…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
I designed the mount to print in two parts. Used the ball joint by Arthur Zopfe on Thingiverse, but as the nut is smaller then the ball I had to design it in place with support. It's easy to remove, only the top surface of the nut could…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Modified commercial child lock. With sophisticated locking system, which is harder to open for children. There are 2 versions of lock: Print only with mounting with glue or double tape (weaker one) Stronger version with need of M3 screws.…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
Simple automatic (self-locking) child safety lock for cabinet drawers. For mounting both parts you can use: high-quality double-sided adhesive tape 2 pcs small screws for hook I recommend to use adhesive tape + screw Recommened print…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This stand is made for holding the Apple Mag Safe Charger. The stand is 3D printed in the orientation it would be placed on the nightstand, with support structures enabled throughout. The recommended print settings include a layer height…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
I have opened this back up so you may print and sell my design, please if you are selling a lot of these then a tip would be appreciated. iPhone 13 & 12 MagSafe Stand is strong enough to support all variants whilst remaining aesthetically…
Print approx. €8.14–€9.94 excl. taxPreliminary estimate for one variant
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Simple Apple MagSafe + Apple Watch wall mount case for 3 countersunk screws. Large enough for an iPhone 14 Pro MAX. Note: Check out this new model too: Charging butler / iPhone + Watch + AirPods Pro wall mount charger Mounting the parts:…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
A sign I created with the 4 cardinal rules of firearm safety. Can pause the print midway for color change or print using the gcode provided. Fits the Prusa Mk3 print bed.
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
My generic step-down transformer from 220v to 110v has a front output that is just taped off. I wanted a more reselient and permanent solution - so this is it. You can, like I did, put a dollop of two-part epoxy glue to the middle of the…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Designed for MagSafe Duo charger, this stand allows your MagSafe to wrap around it, enabling simultaneous charging for your iPhone and Apple Watch / AirPods. It also supports the new StandBy feature in iOS 17 . No supports required.
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Practical travel case for a safety razor. Four magnets prevent the case from opening accidentally. In the bottom of the case is space for several spare blades. The case was printed in place on a Prusa MK3S+ in PLA and ABS. No supports…
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
This print turns a mason jar into a watering station for bees, or if it is legal in your area an open feeding station. You need to print 1 base and 8 of the grid pieces. The grid pieces are sized such that the bees can't get into the…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam. If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Fast and Furious 5 Vault model 1:43 scale from Fast 5 It fits with 1:43 model cars from DeAgostini Fast and Furious and others. It contains 2 parts. You have to use glue on the opening handle. Supports: YES Resolution: Any Print time:…
Print approx. €6.98–€8.53 excl. taxPreliminary estimate for one variant
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for one variant
Designed for MagSafe with USB-C plug (Apple MHXH3ZM/A) Designed specifically for the Volvo C30, S40, and V50. My 3D printed MagSafe vent mount offers a perfect blend of form and function. Engineered for MagSafe technology, your iPhone 12…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Apple iPhone MagSafe stand (for ≥ iOS 17 standby mode). Fits up to iPhone 14 Pro MAX as shown here. The MagSafe charger cable is routed through the holder and foot part to hide it. Underneath the foot some little markers are placed in the…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Following the publication of a multi-colored box that was almost impossible to reopen, I had the idea of turning it into a piggy bank. My contribution is just to have modified the model to add a slot on one side. So there are 6 different…
Print approx. €8.78–€10.73 excl. taxPreliminary estimate for one variant
Printed in PLA 0.4 nozzle 0.2 layers No support needed.
Print approx. €10.57–€12.92 excl. taxPreliminary estimate for one variant
I recommend printing the Base with 100% infill for more weight. Perfect as a Phone Holder in your Workshop, Kitchen, Bathroom or Bedside Table.
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant
This is a solid version of the Safe T Bagel to speed up print times. The webbing included in the original Safe T Bagel forces the slicer to print a lot of perimeters. This version is solid - allowing the slicer to optimize printing. I…
Print approx. €8.39–€10.25 excl. taxPreliminary estimate for PETGSource material: PET
With Mac OS Ventura and iOS 16 now released, one can now use your iPhone as a far superior web cam for your MacBook. I challenged myself to design and print an iPhone adapter instead of ordering the Belkin adapter. Did some research,…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Whether you want to hide a small object that nobody notices or want to bestow somebody with a little gift in untraditional packaging, this is an ideal option for you! For fastening, simply twist both halves. Printing Designed to be…
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
Durant molt de temps he fet servir el fantastic stand d'en Daniel ( @Daniel_130434 ) pero amb l'arribada de iOS 17 volia deixar el Apple Watch pla i donar-li importancia a l'iPhone en horitzontal, aixi que he fet aquest remix.
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
MagSafe Charging Station – Put Your Phone to Sleep in Style! Product Description: Introducing the Phone Bed , a charming and functional MagSafe charging station designed to give your phone a restful “sleep” as you recharge overnight. This…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Need a place to store your ring safely while you're out climbing, trail running, surfing, swimming, or hiking? Drop your ring in one of these little ring safes, press and twist the cap into place, and clip it to a locking carabiner, and…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Based on wbphelps ' great design. You can now mount your SimpliSafe using GoPro style arms. This easily increases the range of motion for mounting. Uses normal M5 GoPro mounting hardware. I assembled with modular arms . Also, included is…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
holder for popsocket which allows the use of magsafe accessories I used magnets from an unbranded non-functional magsafe charger
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
This is a bread lame / dough scorer created to achieve the deepest cut possible from a razor blade. It also incorporates a thumb / finger guard, an ergonomic grip and a vented storage cover for the blade. The blade is held securely in…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
This is a Choking hazard tester as described by CPSC (Consumer Product Safety Commission) at https://www.cpsc.gov/Business--Manufacturing/Business-Education/Business-Guidance/Small-Parts-for-Toys-and-Childrens-Products The purpose of this…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
I remixed it to fit the monitor shelf of my IKEA UTVISNING desk. The monitor shelf is about 22.3mm thick and the remixed model has a gap of 22.2mm. I removed the screws from the model because it fits the shelf very well. This remixed…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Uses a standard 56 MM diameter MagSafe charge “puck' and the standard Apple Watch charge ”puck". Has a takeup spool for long wires and a relief for the camera “bump”. Printed here in PolyTerra PLA at 0.3 later height (no support) This…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
A mag safe wireless charger mount for Peloton Bike+. Only verified compatible with the Qi charger listed in the BOM (annoyingly they are all different sizes, but the one in the BOM is about $15USD, and seems to work well). I tried at…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
add something later here =)
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Print in 2 parts preferebly 0.16mm with gyroid infill. Print phone stand vertical and base horisontal with ironing enabled
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
This is G-clef shaped ornament hook/hanger. It works like a safety pin. You can open it, hang (even on closed loop), and after that close and secure again. Print instructions Print it flat on the bed. Make sure your bridge settings are…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
A simple tab clamp for bleach bottle ‘tab-lock’ caps and similar. Will accommodate caps with radius 20-50mm (external tab diameter) Suitable for anyone with a weak grip or forearm strength restrictions such as MS sufferers (one in…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for PETGSource material: PET
Ballhead is 15° tiltet. Ballhead designed to be glued and mounted with M3 screw. There is also some space to add an M20 screw from the bottom to get more weight. Designed in Onshape…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
Magnet holder to place on top of 'lid open' safety sensor to enable laser operation with open lid. USE AT YOUR OWN RISK!!!! Printed with transparent PLA to see LED underneath. Use 10mm x 2 mm magnet. Remember to check magnet polarity…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 15% infill.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
The MagSafe Compatible iPhone Stand is a practical and versatile 3D printable design tailored for users eager to fully experience the new StandBy mode in iOS 17 while keeping their device charged using Apple's original MagSafe accessory.…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
This is to transport your 19mm e-cigarette protected from outer influences. Fits Joytec 19 or many other D19 products. Print instructions print the areas with threads with 0.12mm layerheigt the rest is printed with 0.2mm layerheight. I…
Print approx. €7.19–€8.79 excl. taxPreliminary estimate for PETGSource material: PET
I saw the idea for this on Instructables by Workshop Edits, but that version had some improvements needed. To explain what this does: when you need to make repeated cuts using the miter gauge (cross cuts) on your table saw, you could…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
With this model, you can convert your MagSafe Duo charging pad into a Nightstand for iOS17. In addition, you can optionally integrate the charger for the Oura Ring and can therefore charge iPhone, Apple Watch / AirPods and the Ouraring in…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Quick and easy print! >> No supports needed << Used to hang 3M safety glasses Mounts with small M3 screw to HSW Watch this video for more informations: https://www.tiktok.com/t/ZGewcvoNb/…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Wall-mounted iPhone charging base, the iPhone is free to rotate 360°. Found two versions, the first is parallel to the wall, the second is tilted for a better view. Base di ricarica per Iphone a muro, l'iPhone è libero di ruotare a 360°.…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This mount allows you to keep your HOTA D6 battery charger attached to your Bat-Safe securely. I fly RC planes and take the Bat-Safe full of batteries to the club field with me, and this makes it simple to carry and move around without…
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant
My EGO lawn mower has 2 self-propel buttons that are way too easy to "trigger" when pivoting the lawn mower. Creature of habit that I am, I always turn/pivot the lawn mower using my right hand. On numerous occasions I have hit the…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
As you can probably garner by the name, this is a very inspired MagSafe charging cube. But I'm cheap and wanted a bit of a reason to learn proper modeling techniques. It is split into 3 printed parts for both ease of replacing something…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Designed and printed this for a friend, but I liked it so much I made one for myself too. This print is for specific models of bench-top mini-mills that have the type of switch shown in the photos (for example, the HiTorque MiniMill sold…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Description Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment,…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for PETGSource material: PET
Stuart from Minions is joining the Nothing family! Inspired by Stuart in black suit . Note: This model was printed with 0.6 nozzle, which is the only one I have, but it should also work with 0.4 nozzle. I had access to grey PETG, yellow…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
The .3mf file comes with all color changes prepared for a single-extruder printer. A small “purge” tower enables a clean filament swap without a blob on the model. The original colors are: yellow-black-brown-yellow. Print with an 0.25mm…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Overview This custom-designed charging dock combines function and minimalist aesthetics, tailored specifically for Apple MagSafe-compatible iPhones and the Garmin Fenix 7/8 smartwatch. The dock consists of two interlocking base…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
Hello, Today I have a Safety Object Grasper for you. It is suitable if you want to move an object without contamination. Your hands are clean , and the object is moved. For proper functionality, you need to use a Printing Profile! I used…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign. The joke runs, “Fast, Good, Cheap: Pick any 2” … but all too often today we get all 3 of “Unsafe, ineffective, expensive” Mesh and Solid models provided. The solid version might be an easier print. Best with color switch…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
As Polypropylene rollers cannot be coated with ESD sprays, we had to made our own handles in house - using ESD safe plastic. We used it over a years in our factory and noticed an improvement in FOD control and cleaningless. Foreign Object…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
2 lids. Best to print them “standing up” to maximize strength in the tabs.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
I love Apple products, but the cable of the MagSafe2 AC adapter is a problem because it quickly becomes frayed. Since Apple does not consider improving it, I made the MagSafe2 AC adapter neck protector. Print Settings: Material: PETG…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
This stand for your Iphone is a luxery one so your Iphone can function as a night-alarm clock, or during the day on your desk. You can use it with or without a (book)case. In case you have a book-case, it can fold on the top over the…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, bearing a relevant reminder from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . You may wish…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Škoda Citigo Navigon → MagSafe Phone Mount Adapter Give the original Škoda Citigo Navigon mount a new lease of life with this simple and quick MagSafe adapter. This adapter is designed to fit the original Navigon mounting point in the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. UPDATED for both new 2024 and old 2020 magsafe charger versions. Idea Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
This is a super simple to print charging stand that utilizes your MagSafe charger. No supports required, and fully modular to fit your phone (as long as it has MagSafe). Update 8/5/23: Support for older style Apple Watch chargers! I have…
Description Simple form, easy to print, no supports Disclaimer: This charger is designed to fit only the original Apple chargers *2025-02-10 Big Update. Currently Apple released 2025 a new charger (Ø 55,5mm and a height of 4,37mm). The…
KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA. NEW VERSION IMPROVEMENTS: LOCKER KEY FOR EXTRA SECURITY. NO THREADS (sand gets stuck and blocks them sometimes) BETTER AIRTAG LOCKING CAP PRINT IN PLACE STRONGER…
Attach your iPhone to any desk or shelves with this dock made for the Apple Magsafe charger. Idea It's perfect for the upcoming StandBy mode for iOS. I had the idea for this model when I saw the last Keynote, I wanted my phone floating…
Galaxy S24, S24 Plus, FE and Ultra cases, to be printed in TPU of your choice. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. edit on 12 Oct 2024: Added Galaxy S24 FE case. Added…
This is a relatively easy to print phone case for the iPhone 15 Pro Max so you can protect your shiny, new, titanium phone. The case consists of two pieces: the case and the camera guard. Print the case in TPU or other flexible filament,…
Version 2 available Version 2 can be printed without supports, has tighter solerances and is smaller while keeping the same inside dimensions. It can be found here . A larger Version with 6 digits is available here . A number safe with an…
As much as my kiddo loved the first cutter version, the point was too pointed and sharp to be safe in his hands. This version still has a point but it is turned inwards for safety. With this shape, getting the point started usually…
READ INSTRUCTIONS: I see a lot of the prints and you guys area printing it in the wrong orientation. It's much stronger if you print it with the Holder orientated how it would be when you use it. UPDATE: Added Glock 43x Needed a place to…
A compact and practical 3D printable box opener designed for safely opening cardboard boxes, parcels, and packaging materials. This compact box opener is a practical everyday tool designed for quickly and safely opening cardboard boxes…
iPhone Halter für iPhone 12/13/14/15/16/17 Pro in Verbindung mit dem MagSafe Ladekabel. Durchgangsloch zum Herausdrücken des MagSafe. Bei bedarf mit einem doppelseitigen Klebeband auf dem Tisch fixieren. iPhone stand for iPhone…
Modular Desk Organizer System – Extended Set (with MagSafe Phone Stand Module) This Desk Organizer Set is a widened version of the Modular Desk Organizer System . It consists of four interchangeable modules : the MagSafe Phone Stand…
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it…
There are three different sizes based on the diameter of the rod handle fish hook contest size
Designed to work ideally with an iPhone 14 Pro or similarly sized iPhone (13, 13 Pro, 14 should be similar) to charge with Apple MagSafe USB-C charger. V2 - Added TPU Base After months of use, I wanted to revise this to fix a couple of…
Check out my Youtube video for assembly info and full list of parts! The files end with “X #” and the # indicates the number of that item are needed Links to the additional pieces needed: Lock (Select the 5/8" Size) -…
The MagSafe stand is designed to hold the phone with or without a case. The accent for the sides is printed separately and fitted in after being printed. Unfortunately, the accent is to big for the Mk3 or Mk4 print bed The MagSafe puck I…
PLEASE NOTE - I have made some changes to the lid since taking the photos. I wanted to reduce the need for supports, so I have added a chamfer to the lid, by the handle. There is now a circle, with a diameter of 29mm, that you can bridge,…
