887 models
276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…
Print approx. €59.50–€72.72 excl. taxPreliminary estimate for one variant
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Sandy Mini is finally here! The little sister of Model 11: Sandy from 3D Sets is here. This 1/16 scale non RC version is our easiest to build model ever. No screws needed, all parts are printable, ALL! More advanced models are also…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Remix of original model: https://grabcad.com/library/the-male-figure-carl Changes on model fits to seat of 3Dsets Model 8 Buggster his right leg is shorter, fits to pedals right hand on other position brand new ears less belly fat more…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
Drawer insets in various sizes with different compartments for the IKEA Helmer drawer unit. I sliced the the model with thirds vertically in half as a smaller variation. Only when creating the technical drawings I noticed that the model…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Print settings 0.2layer Quality profile, printed with PLA. Original bottom part doesn't fits on Prusa Mini printing plate. Model is bigger as maximal size of plate. So, it was little bit redesigned for printing on Prusa Mini. Assembly…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Facom sets come in 5 pieces. In my case five straight flat screwdrivers and two PZ- in three PH screwdrivers. Fun to make a rack with perfect fitting for each screwdriver individually. The printfile Rack_3A is for the flat screwdrivers,…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
240x30x3mm 240x20x3mm 200x30x3mm 200x20x3mm
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
This is the hood with a scoop, allowing extra clearance for additional motor cooling of your winch truck from 3DSets. You should print the hood with extra supports. You can also change the density of a mesh in prusaslicer. Honestly, I am…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
1/16 scale model of an off-road car. The model has real suspension and is assembled just with screws. More advanced models are available at www.3Dsets.com . Want to see lots of cool 3D Sets cars builds? Join our great Facebook group and…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
A Pendulum Wave. Beautiful to watch. See it in action in the attached video. It comes with three sets of Pendula and a pusher which slots into the base. To assemble put an end cap onto the post and then all the pendula with spacers…
Heavy Duty Guitar or Bass Guitar Wall mount hidden Screw Design. Fix the bracket to wall then slot mount over Comes in - 53mm(approx internal prongs) - 53mm neck slot with 5mm wall offset - 53mm neck slot with with 10mm wall offset - 43mm…
These containers come in sets of 6 which fit into each other, so they can be stored efficiently. The sets differ in their heights. use a bayonet lock (twist/click lock in 3D-printing slang) with a nice click due to some springy elements,…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
There are a couple of ring size sets; the advantages of this one: size and shape of typical rings, rounded inside no tabs etc, so you can wear a ring for hours to check if it feels comfortable each ring has it's ring size imprinted in 4…
This latch is very strong to close a closet or drawer with big power. I designed the latch for my closet. Our cats always tried to open the door and do some chaos with our clothings. With this latch the door is always closed.
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
I reworked the "Landy Mini" tire to use it for the Landy/Ranger 1/8. I would like to print the tires by myself, so I scaled the tire from the „Landy Mini by 3D Sets from 1/16 to 1/8. I reworked the tire to print it without support and add…
UPDATE 11/09/2026 Someone had issues with the front cover while using the polar cooler so you should be aware that these covers were made before the polar cooler and from what I can see they won't fit without some hacking. I Will consider…
I recently got my Prusa Mini+. After printing some addons, I searched for something to highlight the hexagons in the front plate. Since I couldn't find exactly what I wanted, I created these little insets in tinkercad. On my front plate,…
These print profiles (or “presets” as the kids are now calling them) make for faster prints, compared to Josef Průša's profiles of similar Z-axis resolution. They can often produce fantastic aesthetics despite their speed, but their focus…
Hi everyone, I have been a huge fan of all axis and allies games for a couple of years now. I am proud to introduce FDM printable packs. The biplanes I will be finishing soon. I still have to make the air packs as well. Enjoy printing!…
This is a remix of this bullbar for the Landy Mini from 3D Sets. I have added a winch. This bumper attaches the same way as the original one. Included in the model are support structures which can be broken out after printing. The…
You have option!! Four option on the pintle hitch alone Pintle hitch . Connects with 3mm eye bolt. Works better and cost less. https://amzn.to/3W2ogoN (US Amazon Affiliate link) Strongest Pintle- Uses a 3mm Eye Bolt cut to to allow the…
Remix with increased height, more premade STLs, fixed mesh and better stand without a slope. Use the 3mf file and just scale the Z height of the “Z_wobble_Test_Tower” object in Slicer. Print in an grey-ish filament and not white, since…
https://github.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets Welcome to the Bambu Studio / Orca Slicer Presets repository! This repository is dedicated to storing / collecting presets that have been meticulously crafted and…
Tekton 1/4" Drive Metric & SAE Sockets Works great with both regular and deep versions Metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 SAE: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 https://www.amazon.com/dp/B07P7WMK4L…
I have been working on this Orca Kobra 2 Max profile for a while. I am running a print as of now so I can't test but wanted to share it. It is as close as I can get to the stock settings with Orca Slicer. Hope you guys like it. I posted…
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
This is a set of Gravitrax compatible 'standard' inserts. More of my models Click here if you are interested in seeing more of my models for Gravitrax Feedback is always a good thing. To encourage me or other designers to make more…
I have created some accessories for the Landy Mini from 3D Sets which can be easily attached with some super glue. The colors you can see in the photos. The mirrors can be easily bent in the right direction after gluing, license plate and…
Darts holder for 4 sets of darts. I initially edited thing https://www.thingiverse.com/thing:4459821 and removed one set of darts as well as the mounting holes. I added 2 foots so it can stand easily on a flat surface. You can find it…
The box's internal dimensions are 4in diameter by 2in deep. 4 asymmetrical keys allow you to easily line the mold halves up and create a very positive fit, which prevents shifting in any direction. Use binder clips to hold the halves…
Trailer addon for Landy Mini by 3D Sets. It is just a little remix of by markberk from Thingiverse. https://www.thingiverse.com/thing:4656335
New items here are: 1/ a template for cutting out plastic lenses 2/ gusset for lenses 3/ a split of the original plage_doctor_whole.stl With the lens template I trace (inside) on paper, then tape the paper to a flat section of blister…
A trailer for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets Remix of the smaller trailer. For me it was too small and it was too high compared to the car. So I remixed it. Also fixed the…
○120mm extend to switch from a 4WD to a 6WD See instructions (pdf build guide file)
Includes SAE and Metric files. Also a painted 3MF for Bambu Studio
This set is meant to be printed with PLA, with the exception of the long bonds, which should be printed with TPU to ensure the flexibility required to make certain molecules. The colors I used is as follows: Oxygen (Red): 2 bonds Hydrogen…
I used these to help stabilize the long 2020 extrusions to the 2040 extrusions on my Creality Ender 5 Plus. These can be used on any frame that incorporates the 20 series extrusions. I uploaded multiple variations depending on your…
L-Boxx Mini Insets There are quite a few insets for the Sortimo L-Boxx Mini out there but none of them fitted my needs: printable on my Prusa Mini easily configurable still being able to use the original dividers My design is only…
Update 08/12 new thinner design for faster printing. Included 3mf files for cube and rectangle. Speed settings are tweaked for maximum speed without (that much) quality loss. Simple insets that fit in Ikea Helmer drawer. The inner bottom…
Print using soft, rubbery filmanet. Something like Diabase X60 Ultra-Flexible Filament works perfectly. I've used hex infill at 3%, which created essentially empty infill with six internal spokes. Use enough top layers so the tire is…
Male driver is based off of: https://grabcad.com/library/the-male-figure-carl Female is based off of: https://grabcad.com/library/mulher-sentada-seated-woman-human-person-1 Scaled and modified to fit as a driver and passenger in the…
Wall mounted (under a dartboard for example) darts holder. I used double sided tape on a scoreboard. There are two files: dart_holder_single.stl is a single set holder (3 darts). You can stack them together. dart_holder_solid.stl is a…
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
15mm is hole spacing 3.10. 2020 - servo arm 15mm 3.10. 2020 - added servo arm 15mm + nut hole 4.10. 2020 - added 20mm version 4.10. 2020 - tooth optimization Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…
These devil horns are made to be attached to a headset or headphones. The .stl file is one single horn. The .3mf file is for Bambu Studio and already includes two horns on the build plate. Print Settings: I printed the horns with 0,12 mm…
Everybody who owns one of these ITIWIT Inflatable Kayaks knows the Pain: Lugging around the Paddles sucks. So i designed a clip to hold it all together nice and tidy. Print with ABS/PET or PLA, at least 3 Perimeters, 35% gyroid infill. It…
This is an alternative wheel design for the Landy Mini from 3D Sets ! I took the original model of the rim, and swapped the center section for a 5 spoke design. The reception of the axle and the tire are unchanged. If you like check out…
Mud guard and trunk floormat with the Landrover logo that fits for the 3D sets Landrover. Print instructions Printed in TPU or TPE
Angry eyes for Rancher jeep from 3dsets.com To be glued on top of the default grill Print instructions No tested yet, let me know how it prints and fits
Modified front panel so that the angry eyes grill fits over it. Both parts easy to print flat on the printer. Made holes to replace the two upper 3 x 10 mm screws with 3 x 12 mm screws to secure together the angry eyes mask, front panel…
Just to clarify - this model contains changed files only (based on Model 6 v 1.1.2), to build the whole thing you need other parts from one of the Rancher models from 3DSets:…
Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…
A bullbar for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets No supports needed, they are pre-modeled in there in the spirit of the Landy Mini model. Just remove them. Print Settings…
My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…
HOLIDAY UPDATE (11.12.2024) Total redesign of the containers. Now you can choose between four grill patterns and two types of hygrometers. The files are distributed by folders. The previous designs have been moved in the "Old sets"…
This is a set of various insets for the 6-exit basic tile (thing https://www.printables.com/model/428827-gravitrax-compatible-basic-tile-with-six-exits ). Some form together with the 6-way-exit block standard tiles. And some combination…
This is an insert / organizer for burncycle, all of its released expansions (as of December 2023), and the Brassmag Volumes 1 and 2. It all fits in the core box, has no lid lift, supports vertical storage, and was designed to aid setup…
Solid layers - Top / Bottom (0 layers) Infill density: 30% Infill type: Honeycomb Perimeters: 2
Update 2024.01: Added the S-Connector and extra long version for those tracks that just dont fit. Newly designed to be a rapid print and low material version of the loved track sets. If you have these train sets, you know that these…
Warning Some print issues on some original files, I solve it by changing from 0% to 15% infill on the upgrade parts which have failed with 0% infill. Definition C1 is the bottom color, C2 the middle one and C3 the top one. Printing Is…
Warning Already printed but not yet assembled with all the Max Team van. Modeling seems to be ok but it should be tested in the real life. Definition C1 is the bottom color, C2 the middle one and C3 the top one. Printing Is required the…
Blocks designed with children in mind. Missing elements of building houses, machines or cars. Every LEGO enthusiast will find something for themselves. The list of bricks will be updated with new bricks
This is open differential for Jeep Rancher from 3dsets. I test it on version Wagon, but should be possible to mount it also on other versions. I created it this open diferencial, because I'm using my Rancher in house on vinyl floor and…
These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…
This is a Front Bumper for a 1:8 scale Warn Winch for the 3DSets Landrover Defender. Included are two versions. One with holes to mount tow hooks, and one without the holes. Mount the parts as shown on the pictures. You need the Original…
Jack for 3D Sets Landy 4x4 RC model 1:10 scale
This is a mod that allows you to use this roof rack: https://www.3dsets.com/product/roof-rack-accessory-for-model-4/ on the much larger Landy 4x4 Wagon. You will need at least a 300x300 print plate to print the rack and side rails but I'm…
My model is an enhancement of @daftwullie_538182 great inserts that you can find here: https://www.printables.com/de/model/545542-l-boxx-mini-insets It is based on my enhanced inner volume model of the L-Boxx Mini. I modelled this to…
simple wall holder for 1:8 RC cars Landy or Rancher from 3dsets.com suitable for any other car with 100mm wheels Print instructions print with 3 perimeters for extra stiffness of the thin part. Any material or other settings should be fine
Remix Holder for 2 and 3 sets of darts with dart accessories or storage. Several possibilities.
I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…
This is a dashboard for 3DSets Model 7 Buggy designed for a double colour change at layer height. Open the 3MF in PrusaSlicer and press Slice now to see the layers the colours are changed at. Print at 0.15 mm layer height using PLA. Also…
Update: Please have a look at https://www.thingiverse.com/thing:4765065 to get best quality and improved features Darts arrow holder for 4 sets of darts. I took thing 4459821 and removed one set of darts as well as the mounting holes. I…
Stand for 3dsets.com Landy 4x4 Wagon modified upper part for better vehicle balance and better fit slightly wider stand footprint for improved stability Print instructions 0,3 mm layer height, 3 perimeters, 15 % gyroid infill.
Train tracks compatible with IKEA, Brio and other wooden tracks. Straight, in sizes: L - 240mm, M - 145mm S 100mm, Other models seems to have a problem with the position of the connection, so I designed my own. Tested on IKEA and Aldi…
This grille is for the 3DSets Model 14 “MAX Team Van” aka the “A-Team Van”. It will replace the Grill labelled “MAX” with the “GMC"-labelled version that you need for the A-Team Van (or any othe GMC Express Van).
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
Warning Already printed but not yet assembled with all the Max Team van. Modeling seems to be ok but it should be tested in the real life. Definition None Printing Is required the same printer size than 3D SETS has defined. Use the same…
The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…
Converted the Long Magnetic Dice Case, (which is a remix of the Print in Place Dice Case) to have 3 rows of dice. It is much bigger now (20cm by 9cm), but houses all my dice in a neat manner on my game table. The box i printed looks…
I used standard printer settings with 10% infill for my M5C. Tracks are identified by their track ID E1 or E and curve radius. E2 track is non standard full 90 degree turns. Dimensions should be a generous loose fit that should be able to…
opona do modelu rescuer 3dsets
The parts of this mod are a replacement for the “Roof1”-part from 3DSets in case you want to add a sun roof to the Model 14 / MAX-Team / A-Team / GMC Vandura Van. You will need an additional piece of clear plactic sheet for the glass of…
Warning None. Definition None. Printing Is required the same printer size than 3D SETS has defined. Use the same setting than 3D SETS Spoiler Front - left and Spoiler Front - right for the modified Spoiler Front left - with Fog Lights and…
As I am building the model 7 Buggy from 3Dsets.com, I was missing a hood strut to keep the hood open. This can be handy when working on the receiver, which on this model is located under the hood, or just to keep the hood open when on…
I made this blank licence plate as a basis for guys interested in making their own. Step file is included although not sure if I exported it using right preferences.
I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…
