Search results: sfs

Sort order

253 models

P
PrintablesMogu1lito

BTT SFS (Smart Filament Sensor) V2.0 Voron backpanel mount 2020

Simple BTT SFS (Smart Filament Sensor) V2.0 holder for Voron back panel. There is almost 1mm gap between backpanel and holder. Its just for tolerance. You can use 1mm foam tape to fill the gap. STEP file included.

Downloads
797
Likes
109
Rating
5
P
PrintablesTom

Voron BTT Smart Filament Sensor (SFS)2.0 Mount by Tom

Create for the new bigtreetech Smart Filament Sensor(SFS) 2.0 Mount with voron2.4/trident. Suit for 2020 extrusion.

Downloads
701
Likes
66
Rating
5
P
PrintablesSapuSeven

BTT SFS v2 Vertical Mount

Print without supports. Needs 1x M3x12 SHCS as well as an M3 T-nut for mounting on the aluminum extrusion, as well as 3x M3x10 FHCS for mounting the sensor itself. It's recommended to use something like…

Downloads
519
Likes
79
Rating
4.83
P
PrintablesYathani

BTT SFS V2.0 Smart Filament Sensor 3030

BTT SFS V2.0 Smart Filament Sensor for 3030 with M6 bolt.

Downloads
450
Likes
45
Rating
5
P
Printables3DPrintDemon

VORON 2.4 EXHAUST HOUSING SIDE MOUNT FOR BTT SMART FILAMENT SENSOR V2 SFSV2 BIGTREETECH

…Please be sure to hit like & post a make, I'd love to see your prints! Add a BTT SFSv2 to your Voron with a neat & sturdy mounting solution. Extra parts required: x5 M3 8mm cap head bolts x3 extra BOM M3 Heat Set Inserts Find the…

Downloads
341
Likes
65
Rating
5
P

BigTreeTech Smart Filament Sensor (BTT SFS) V2.0 mount

mount for Voron / 2020 extrusion with 4mm panels print on the side, no supports required link to onshape document:…

Downloads
337
Likes
28
Rating
4.67
P
PrintablesViktor von Due

VORON BTT Smart Filament Sensor SFS 2.0 Mount

2 Versions: Version 1: Printed parts: 1x exhaust_filter_housing_sfs2.0.stl. The sensor is only held in place by the PTFE-coupler. I noticed it's stable enough this way. No additional hardware required. Version 2: Printed parts: 1x…

Downloads
325
Likes
33
Rating
5
P
PrintablesCharlespick

Voron BTT Smart Filament Sensor (SFS) Mount

Remove the 6 screws on the back of the sensor and reuse them to mount the printed part to the sensor housing Then use 2 M3x14 screws and 2 M3 roll-in/hammerhead T-nuts to mount it to the frame after the panels are installed. It's designed…

Downloads
312
Likes
44
Rating
5

BTT-SFS2 Mount

A Mount for the BigTreeTech Smart Filament Detection Module V2.0 for Voron 2 and Trident. Printing Choose the correct STL files according to the thickness of your rear panel + foam. (for a 3mm panel, w/ 1mm foam, use the _4mm STLs) If you…

Downloads
270
Likes
71
Rating
5
P
PrintablesYuriy Yarosh

BTT SFS 2.0 2020 mount

You'll need two m3 x 10 screews and T-nuts to mount it.

Downloads
261
Likes
31
Rating
5
P
PrintablesDonnie Wallen

BTT SFS V2.0 Mount

Needed a mount for the new BTT SFS V2.0 sensor. Quick hop on fusion, and now its a thing. Uses M5 screws to mount to the frame of the printer. Designed to be used on my corexy BugBu260. Still learning fusion and all it can do. If you find…

Downloads
251
Likes
27
Rating
3
P
PrintablesKrhom

Voron 2.4 BTT SFS V2.0 Back Cover and Mount

A nice and easy way to mount your the BigTreeTech SFS V2 at the back of the printer. Printed in ABS with the normal Voron print settings.

Downloads
241
Likes
35
Rating
5
P
Printablesjeronbernal

2020 Voron BTT Biqu SFS V2.0

Made this remix since my spool is located in the stock side location, i needed the SFS to point to the side in oppose to the top, kept the 4 mounting holes to have it either position upwards or downwards, hope it works out for you guys :D

Downloads
238
Likes
23
Rating
5
P
Printablesaxseb

Bigtreetech Smart Filament Sensor SFS Bracket for Voron Exhaust

Materials needed: 2x M3x6 BHCS 2x M3 T-Nut 4mm PTFE Tube (2mm ID) 1x Bigtreetech Smart Filament Sensor SFS V1.0 Optionally for added rigidity 2x M3x6 BHCS 2x M3 T-Nut There is a cable channel to hide the cable in the extrusion. I'd…

Downloads
222
Likes
43
Rating
4.5
P
PrintablesTOOLBOXs

BTT SFS V2.0 Smart Filament Sensor For QIDI X-MAX 3 Bracket

During the use, I encountered some problems in the code, and after correcting them, it can run normally. Thanks to the QIDI TECH customer service team for their assistance. The bracket has also been optimized many times. Finally, post the…

Downloads
218
Likes
44
Rating
5
P
Printablesmoby

BTT SFS V2.0 Mount for Voron

Voron Mount for the new BTT SFS V2.0

Downloads
216
Likes
15
Rating
5
P
Printablesspengineer

BTT Smart Filament Sensor 2 (SFS2) Mount for Voron 2.4 and Trident

Mount for BTT Smart Filament Sensor 2 (SFS2) for Voron 2.4 and Trident, uses M3x8 cap head screws. Meant to mount to top of the enclosure, in the rear right of the printer near the standard filament spool holder mounting position. Bolts…

Downloads
213
Likes
25
Rating
5
P
PrintablesBen Davies

QIDI X-Plus 3/X-Max 3 mount for BTT SFS V2.0 Filament Sensor

A mount to attach the BTT SFS V2.0 filament sensor to the QIDI X-Plus 3 using the original filament sensor mount holes. It has holes to mount the BTT sensor vertically or horizontally and uses old filament sensor screws and the new BTT…

Downloads
202
Likes
57
Rating
5
P
PrintablesKr0pi

BTT SFS 2.0 Voron 2.4 holder

This may need a bit more of update but works fine for me. I used screws delivered with sensor and M5 screw to mount it onto my Voron with M5 t-nut.

Downloads
201
Likes
20
Rating
1
P

Bigtreetech SFS V2.0 bracket mount on Creality K1 Max

Bigtreetech SFS V2.0 bracket mount on Creality K1 Max Needed an external way to mount the sensor on my K1 max. Printed with supports at 20-25% infill in any material. Nut insert or wood screew needed to mount firmly. UPDATED CODE…

Downloads
200
Likes
53
Rating
5
P
PrintablesADSRMedia

3030 Mount for the BTT SFS V2.0 Smart Filament Sensor

The design was intended to use M6 12mm bolts with drop-in nuts to attach the mount to 3030 extrusion. There is also a variation that includes keyholes so that it can be added to existing t-bolts. M3 10mm bolts are used to attach the…

Downloads
195
Likes
17
Rating
5
P
Printablesr6e

SFS V2.0 Pivot Mount

This is a mount for the BigTreeTech Smart Filament Sensor V2.0 to attach it to an aluminum extrusion. It uses a 608 bearing to pivot, reducing drag, lateral tension on the extruder, and possible rubbing against cables and other parts.…

Downloads
190
Likes
39
Rating
4.75
P
PrintablesStonehengeFR

Mount for BTT SFS V1.0 Smart Filament Sensor

This is a simple mount/holder for the BigTreeTech BIQU Smart Sensor filament. I design it to be with 2xM3 Screws. I design it to be mounted on my aluminum frame 20 × 20 with T-nut or sliding T-nuts. The 2 “arms” that are going to top of…

Downloads
182
Likes
16
Rating
5
P
PrintablesHitLuca

Bigtreetech Smart Filament Sensor [SFS] V2.0 2020 extrusion mount

Mount for the SFS 2.0 that allows mounting it on an horizontal extrusion and keep the filament path orizontal

Downloads
182
Likes
26
Rating
5
P
PrintablesBasementGremlin

BTT SFS 1.0 Sidemount for the Creality K1/K1C

Introduction This is a sidemount for the BTT SFS 1.0 that works for the Creality K1/K1C and moves the sensor to a more accessible position to the side of the printer. With the new smart filament sensor you can detect clogs and prevent…

Downloads
176
Likes
17
Rating
5
P
PrintablesDziobaasty

BTT Smart Filament Sensor V2.0 SFS Mount

BOM 3x M3x8 1x M3x10 1x Hammer nut m3

Downloads
170
Likes
18
Rating
0
P
PrintablesWillie Sippel

BTT SFS V2.0 Mount for Sovol SV08

Prints flat, no supports needed, material and settings shouldn't really matter. I used eSun ABS+. This mount attaches to the stock spool holder just like the original, and allows you to replace the stock runout sensor with a BigTreeTech…

Downloads
160
Likes
30
Rating
5

Voron 2.4/Trident Exhaust Cover with BTT SFS 2.0 Mount

EDIT: Lowered the plate for the SFS mount by a few mm to give a bit more room to access the lever on top.

Downloads
152
Likes
20
Rating
0
P
PrintablesGroon

ERCF Smart Filament Motion Sensor - Cheap DIY alternative to BTT SFS

This is a remix of a remix of the encoder cart in the Enraged Rabbit Carrot Feeder to act as a standalone filament motion sensor for your 3D printer. Unlike other filament motion sensors, it adds very little resistance. Also unlike a…

Downloads
139
Likes
56
Rating
0
P
PrintablesRobert Brown

BTT SFS V2 2020 mount

Vertical extrusion mount for BigTree tech's v2 Smart Filament Sensor. One M5 BHCS, one M5 T-Nut.

Downloads
135
Likes
27
Rating
0
P
PrintablesChado

BTT SFS 2.0 Vertical Mount with stock M3s

Firstly thanks SapuSeven for tinkering this mount for BTT SFS 2.0. I just remixed a little bit to use stock M3s itcomes with a longer surface area to mount.

Downloads
135
Likes
16
Rating
5
P
PrintablesthePunderWoman

RatRig BTT SFS 2.0 Mount

This is a mount for the BigTreeTech SFS 2.0 sensor for RatRig printers. It was specifically made for the VCore 4. It uses 2 M6 x 12 screws and 2 drop in t-nuts to attach to one of the frame rails of the printer. It has enough clearance…

Downloads
132
Likes
23
Rating
5
P
Printables3DesignsCH

BTT SFS V2 2020 Mount

Mount for BTT SFS V2.0 for 2020 Extrusions. The tolerances are for ABS/ASA filament. Recommended print settings: 3 Perimeters/Walls 5 Bottom/Top layers 25% infill 0.2mm layer height Use original screws to mount sensor to the mount. 8mm M3…

Downloads
130
Likes
16
Rating
0
P
PrintablesGuni

ButtonBox A320 MSFS

Buttonbox comprenant 8 switchs à levier pour le panneau des lights, 6 boutons tactiles pour les fuel pumps, les batteries, ext power, APU bleed,le master switch APU et le Start APU, un rotary 3 positions pour les ADIRS (les 3 sont couplés…

Downloads
126
Likes
7
Rating
0
P
PrintablesGlenn Thörn

BTT SFS V2.0 For Sovol SV07/SV07+

Update(#2) 2024-01-04: Filament guide to be mounted on top near spool holder added. Made and tested by Tomas Olsson. ---------------------------------------------------------------------------------------------------------------- Update…

Downloads
122
Likes
30
Rating
4
P
PrintablesRaz

Biqu H2 SFS V2.0 Smart Filament Sensor

I couldn't find one like that so I made one, Hope you will like it.

Downloads
119
Likes
17
Rating
5
P
PrintablesChinstrap777

BTT SFS v2.0 Mount for the K1 Max v1.5

Simply put this is a mount for the BTT Smart Filament Sensor (SFS) v2.0 to the K1 Max that allows for feeding from the side. I'll update the model as I receive feedback. I haven't tested this on the K1/K1C, but it might fit. I have also…

Downloads
108
Likes
16
Rating
5
P
Printableskpleiss

BTT SFS V2.0 Mount

This is a mount for the BTT SFS V2.0 I designed it for my Ender 3 v2 which is converted to Directdrive. So the Extruder Stepper Mount is free. But this mount should fit any NEMA17 mount. I left one mounting hole unused because of my cable…

Downloads
107
Likes
10
Rating
0
P
PrintablesOskait

BTT SFS V2.0 (Filament Sensor) Mount for V-Core 3.1 or 3030 Extrusions

Since the new Toolhead from RatRig goes over the back extrusion, routing the reverse bowden tube down the middle is not possible anymore. So I made a quick mount for my BTT SFS V2 Filament sensor to mount to the side. This way the PTFE…

Downloads
105
Likes
10
Rating
0
P
PrintablesImho_3D

A simple holder for BTT SFS v.2 filament sensor SFS v.2

A simple holder for BTT SFS v.2 filament sensor SFS v.2 I made it for an Artillery Hornet and it is located in the upper 20x20 profile, but I imagine you can put it in any type

Downloads
100
Likes
10
Rating
5
P
PrintablesJack Squirrel

BTT SFS V1.0 Smart Filament Sensor for Voron 2020 Mount

BTT SFS V1.0 Smart Filament Sensor for Voron 2020 Mount Replace the original guide bracket

Downloads
99
Likes
13
Rating
4.5
P
Printablescliftoce

BTT-SFS2 Filament Sensor Angled Mount for Voron Trident/2.4

Inspired by MapleLeafMaker's BTT-SFS2 Mount , but building on the original Trident midspan panel clip (6mm version), this model provides a way to mount the BigTreeTech SFS2 (Smart Filament Sensor v2) in a way that is convenient for…

Downloads
97
Likes
19
Rating
0
P
PrintablesEddieSha

BTT SFS 2.0 - 2020 Mount (Smart Filament Sensor 2.0)

2020 Mount for BTT SFS 2.0. Designed for 3mm foam, 3mm panels and insulation on outside of panels.

Downloads
97
Likes
14
Rating
4
P
PrintablesOne7Seven

BTT SFS V2.0 Bracket Mount for 1515 Voron Extrusion

13 July 2024 - Rev_1 Updated files with adjusted dimensions and increased fillet radius. I made this beefier bracket to mount BTT smart filament sensor V2.0 to my Micron+ back panel, since I have 3mm foam panel I need a specific one and…

Downloads
95
Likes
13
Rating
0
P
PrintablesJosh Edlin

BTT SFS 2.0 Voron Switchwire Side Mount

Mount for the Big Tree Tech SFS 2.0 for side mounted spools on the Voron Switchwire. I used the spacing from the side spool holder from here:…

Downloads
95
Likes
29
Rating
5
P
PrintablesBiny

Mercury ZeroG Spool Holder with BTT SFS 2

Mercury ZeroG Spool Holder with BTT SFS 2

Downloads
92
Likes
19
Rating
0
P
PrintablesGoose

Creality K1/K1C BTT SFS V2 Filament Sensor Mounts + Guide

Printed in PETG Model DOES NOT FIT K1MAX Hardware needed ------------------- 2x M3x10 mm machine screws (If they are still there I believe there are two extra that come with the printer) Sensor Setup ----------------------------------…

Downloads
88
Likes
15
Rating
0
P
PrintablesValeriy

Mount btt sfs 2.0 for creality k1c

You'll need five m3 x 8 screews

Downloads
85
Likes
30
Rating
5
P

BTT SFS V2.0 mount for Voron 0.2R1

Used 0.2R1 foot as original part, so if you use older variation, you will have to update all 4 feet and all of the skirts. Uses: 3 x M3x16 BHCS Use 3 spacers (included) to make clearance for the rear panel.

Downloads
84
Likes
14
Rating
5
P
PrintablesMx3D

BTT SFS V2.0 - Voron extended mount

BigTreeTech SFS V2.0 Voron extended mount by 20 and 23mm lower The encoder puts a lot of resistance to the filament pull, and the extra loop on the bowden cable made the friction worse, and we don't like that. Here is a solution where…

Downloads
82
Likes
16
Rating
5
P
PrintablesSmiksky

Ender 3 (Pro) Stock Extruder BTT Smart Filament Sensor (SFS) Mount

I was unable to find a mount for the Big Tree Tech Smart Filament Sensor that aligned correctly with the stock extruder on the Ender 3 Pro, so I remixed one to work. The part is a replacement for the stock sensor back piece, and slides…

Downloads
82
Likes
15
Rating
4
P
PrintablesMacek Jazur

Ender 3 Pro Direct Drive LCSFS Filament runout sensor mount.

Ender 3 Pro Direct Drive (Creality bracket) LCSFS Filament runout sensor mount. Allows one to have a FRS just a bit over the extruder excet on top of a frame which could couse runout triggering. PLA by KINGFIL 100% infill Nozzle 200…

Downloads
82
Likes
12
Rating
0
P
Printableszackdrews

Voron Exhaust Cover BTT SFS V2.0 Mount

This is a very good way to mount a BTT SFS V2.0 to your Voron! Simply put some heatsets in the angle bracket and bolt the angle bracket to the exhaust cover. Then bolt your filament sensor to the angle bracket.

Downloads
81
Likes
16
Rating
5
P
Printableslixife liu

BTT SFSV2-for-voron

BTT SFSV2-for voron

Downloads
80
Likes
4
Rating
0
P
PrintablesFerfi

V-Minion - SFS + WobbleX cap

This is my Z-extrusion cap holding BTT SFS as well as bearing for Z-lead screw necessary for WobbleX. WobbleX cap uses 608 bearing. It should be possible to possible to install using light-medium force. The lead screw included in RR…

Downloads
75
Likes
10
Rating
5
P
PrintablesJosep AC

BTT SFS V2.0 RatRig V-Minion

Since I really liked the original design by @RomRider, I remixed it in Fusion360 using a CAD model of the SFS V2.0, and ended up with this awesome filament sensor holder I'd love to share with anyone who might need it. Required hardware:…

Downloads
75
Likes
20
Rating
5
P
PrintablesTau

Ender6 BTT SFS v2.0 mount

SFS v2.0 mount to fit to the original E6 filament sensor mount. This raises the mount point as i found the original one ran too close to the filament spool and wouldn't always allow the filament to unwind nicely. SFS can be mounted either…

Downloads
73
Likes
7
Rating
5
P
Printables3DPrintDemon

SOVOL SV08 MAX BTT SFSv2 MOUNT Smart Filament Sensor v2

SV08 MAX BTT SFSv2 MOUNT EDIT: ADDED 90º version where its angled to the side of the printer. This model is designed to fit the official Sovol Enclosure kit! No modifications required. Just add it to the open slot in the top metal plate.…

Downloads
72
Likes
15
Rating
5
P

BTT SFS v2.0 Mount Adapter for Neptune 4 Series

This simple adapter that leverages the existing filament sensor mount on the Neptune 4 series to mount the BIGTREETECH Smart Filament Sensor v2.0. Try this out with my Bowden adapter for OrzOrzOrz's Neptune 4 shroud with KUSBA spacing…

Downloads
72
Likes
12
Rating
0
P
PrintablesNeevoet

BTT SFS 2.0 mount for Voron 2.4 (2020 profiles)

Mounting bracket to replace the bowden retainer with the BigTreeTech Smart Filament Sensor v2.0 Sensor attached to mounting bracket with screws included with the sensor and bracket attached to profile with 1 t-nut and 1 M3x8 SHCS. Version…

Downloads
70
Likes
14
Rating
0
P
Printablesdsolana

BTT SFS V2.0 Smart Filament Sensor 3030 Mount

BTT SFS V2.0 Smart Filament Sensor 3030 mount for the RatRig V-CORE 3.1. Fits for the gap ( 47mm ) shown between the V-Core 3.1 frame and the electronics subframe. RatRig V-CORE 3.0 and 3.1 - Compatible with no enclosure or enclosure 2.0…

Downloads
70
Likes
10
Rating
0
P
Printablesjulez85

Holder BTT SFS V2.0 Smart Filament Sensor Voron 2.4

Printed in ABS+ with Voron PiF settings.

Downloads
70
Likes
1
Rating
0
P
PrintablesiEBPO

Creality K1/K1C honeycomb style side mounts SFS v2

Creality K1/K1C honeycomb style side mounts SFS v2

Downloads
69
Likes
15
Rating
0
P
PrintablesAnt

Summer Waves Polygroup SFS SkimmerPlus Skimmer Vacuum Adapter

This is the Summer Waves SFS SkimmerPlus Vacuum adapter. I also added a version that accepts an o-ring (size: R-11 recommended). Supports are only only needed on the EXTERIOR of the intake and are suggested on the main dome. Add support…

Downloads
69
Likes
11
Rating
0
P
PrintablesLord_of_Shred

Bigtreetech BTT SFS V 2.0 Filament Runout Sensor Anycubic Vyper Mount

I created this mount for the Bigtreetech SFS to work as a swap in replacement for the Anycubic Vyper's original filament runout sensor, which isn't the best. It works with the original M3 screws from the Anycubic sensor but I changed them…

Downloads
69
Likes
8
Rating
0
P
PrintablesRedSilex

BTT SFS V2.0 Smart Filament Sensor adapter flush connection to VORON 2.4

Made this bracket to mount the BTT SFS V2.0 Smart Filament Sensor adapter with a flush connection to VORON 2.4.

Downloads
66
Likes
8
Rating
0
P
Printablesmattkollar

Sprite Pro Extruder BTT SFS V2 Mount

Sprite Pro Extruder BTT SFS V2 Mount

Downloads
64
Likes
4
Rating
5
P
PrintablesCombass

BTT SFS V2 mount for SOVOL SV06/SV06+ extruder

! WARNING ! be careful with tall print, mount touch spool and Z blue top cap use https://www.printables.com/model/825685-spool-spacer-sovol-sv06 for solve spool problem print in 0.2 flat side on the bed support for screw centerer PLA ok…

Downloads
62
Likes
4
Rating
0
P
PrintablesRob Hough

BTT SFS V2 Mount - 2020 Mount

This is a simple 2020 mount for the BTT SFS-V2. I had come across several, but stopped after #4-5, as they were all mounting the sensor in an orientation that wasn't working for me. I wanted my sensor mounted vertically as to allow the…

Downloads
59
Likes
5
Rating
0
P
Printablesits_Blackpoint

BTT SFS V2 Mount Voron 0 (1515 Profile)

I've Modded the Original Mount From the BTT Github to fit a 1515 Profile for My SaladFork. This Would also fit for Voron 0 or other Ant Printers like Micron.

Downloads
58
Likes
4
Rating
0
P
Printablestehlonz

BigTreeTech SFS V2.0 Mount for Voron Internal Spool

Z axis mount for BTT SFS v.20 for Voron Trident with Internal spool holder. Used an M4 fastener to Z extrusion. Printed in ASA. Time will tell functionality over long term with chamber heat.

Downloads
57
Likes
6
Rating
0
P
PrintablesAntipode

Voron 2.4/Trident Canopy mount for Big Tree Tech Smart Filament Sensor 2.0 (BTT SFS 2.0)

This is a corner panel remix for mounting the Bigtreetech's Smart Filament Sensor 2.0 (BTT SFS 2.0) to the Voron 2.4 or Trident canopy. The sensor is mounted at an angle and there is a pass through port for the PTFE tube, as well as a…

Downloads
56
Likes
9
Rating
0
P
PrintablesAnt

Summer Waves Pool SFS Skimmer Adapter to Intex 1.5"

This is for a Polygroup Summer Waves 10ft pool with skimmer SFS400/SFS350 pump.This will allow you to remove the pump assembly and install a upgraded pump and 1.5" hose. Version #1 uses the same 3.5mm thick 24.5mm inner diameter intake…

Downloads
56
Likes
7
Rating
0
P
PrintablesAl & Mic

#SSFS Super Simple Face Shield (inch and mm)

Assembly Method: So we looked at what was out there and wanted to simplify current designs as much as possible, we also wanted to design for laser cutting so these can be mass produced. -Its laser cut so 100-1000 can be produced a day -We…

Downloads
56
Likes
1
Rating
0
P
PrintablesValeriy
Downloads
55
Likes
19
Rating
0
P
Printables3DPrintDemon

SOVOL SV08 MAX BTT SMART FILAMENT SENSOR V2 SFS

Print ASA/ABS/PETG 20-30% infill (or 40% if you want to use Voron spec), no supports required. For use instead of the Sovol auto feeder unit. Use 2x 8-10mm M3 bolts to attach to the printer & x3 10-12mm M3 counter sink bolts for the…

Downloads
55
Likes
21
Rating
5
P
Printablessl0m0

2020 V-Slot BTT SFS V2.0 sensor mount and filament guide (direct drive)

This is a flexible mount for BTT Smart Filament Sensor Version 2 (SFS V2.0) using a bowden tube between SFS and the Hot-end or extruder. It mounts on top of the crossbar using an M3 T-nut. The SFS is to the rear and the elongated slot is…

Downloads
54
Likes
12
Rating
0
P
Printableslxlmongooselxl

Ender 3 - BTT SFS V2 Mounting Plate - Extruder Bracket

A simple mounting plate for mounting the BTT Smart Filament Sensor to the extruder bracket of the Ender 3 models that have been converted to a direct drive extruder. Hardware needed: 3x M3x12 Machine Screws 2x M3x8 Machine Screws…

Downloads
52
Likes
9
Rating
0
P
Printableszen zen

BTT SFS V2.0 MOUNTER for VORON 0.2 (replacement of motor panel)

You can mont btt sfs on the motor panel. You can print this part with VORON 0.2. Just replace original motor panel.

Downloads
52
Likes
17
Rating
3
P
PrintablesSilicon Fossil

Voron Exhaust with BTT SFS V2.0 and PG7

Remix of Modified Voron Exhaust Filter by Michal Kelnar to add a option for PG7 *New to CAD but did my best* tried to line up the fitting best I could to keep in aesthetically pleasing from both sides so there is a slight offset.

Downloads
51
Likes
10
Rating
0
P
PrintablesToxicMoonCake

MSFS Airbus Throttle Preview

im used to tinkercad, but thats not good enough for this project. So its taking me time to get used to this one. only started yesterday. xD dont know how the rest will go. but i have thrustmaster airbus, but the addons are quite…

Downloads
51
Likes
10
Rating
0
P
Printables81VR6

BIQU H2 V2S Filament Cutter with BLTouch mount and SFS2.0

Built for a modified Creality Ender 5 Plus with Biqu H2 V2S Extruder to integrate with a BTT SFS2.0 smart filament sensor. Printed in ABS-CF for stiffness/temp resistance (running in a heated chamber). Some holes may need to be tapped M3…

Downloads
51
Likes
9
Rating
0
P
PrintablesSimply Maker

SFS V2 Filament Sensor Bracket for 2020 Aluminium Profile

2020 aluminum extrusion mounting bracket for BIGTREETECH Filament Sensor V2 design for Ender3-Switchwire . This bracket is designed to mount the sensor on the top rail to feed filament from a dryer positioned beside the printer. The…

Downloads
51
Likes
7
Rating
0
P
PrintablesNightLonk

BigTreeTech Smart Filament Sensor (BTT SFS) V2.0 mount

This is a quick and easy mount to use the BTT SFS 2.0 with the "RatRig V-Minion Smart Filament Sensor Top Cap". Made in Tinkercad. Both files are included, but if you already have the TopCap printed then you'll only need the mount I'd…

Downloads
50
Likes
9
Rating
5
P
Printablesdemanu

BTT SFS 2.85mm

BTT SFS (smart filament sensor) for 2.85mm filament. I am still using 2.85mm filament, hence I adapted the original design to fit my needs. You will still need the same internals/hardware from the 1.75/original. references:…

Downloads
49
Likes
7
Rating
0
P
PrintablesEddieSha

BTT Smart Filament Sensor (SFS 2.0) - 1515 Extrusion Mount

BTT Smart Filament Sensor (SFS 2.0) - 1515 Extrusion Mount

Downloads
48
Likes
5
Rating
0
P
PrintablesRynok

SFS V2.0 Pivot Mount for Ender 3 V3 SE/KE

I found the original model that provides a pivot mount for attaching the BigTreeTech Smart Filament Sensor (SFS) V2.0 to an aluminum extrusion, and wanted to adapt it to my needs of using it with the Creality Ender 3 V3 SE. Since I…

Downloads
47
Likes
6
Rating
5

BTT SFS v2.0 mount for Voron V2 (OUTDATED)

BigTreeTech Smart Filament Sensor v2.0 grill mount, variation on this model: https://mods.vorondesign.com/detail/JpyUj2eynCA10xcD4UEdow I've revised this part and designed a new one:…

Downloads
46
Likes
9
Rating
0
P
Printablesning

BTT SFS V2.0 Smart Filament Sensor mount for the Sovol SV08

This mount is affixed to the part of the frame that is typically used for the spool holder. The screws that go into the frame are M4. The ones that go into the filament sensor are M2.5.

Downloads
45
Likes
6
Rating
0
P
Printablestehlonz

BTT SFS V2.0 Mount 2.0 for Voron Internal Spool

Remix of previous for a more robust mount.

Downloads
45
Likes
4
Rating
0
P
PrintablesProwlerON

VORON BTT Smart Filament Sensor SFS 2.0 Mount for 2.4R1 Exhaust

I still have the Voron 2.4R1, but I am running low on my accent colour. It is easier to print the main colour of black. Modified the file to support the single hole design for the exhaust housing from the 2.4R1 design. Also added a slot…

Downloads
45
Likes
6
Rating
0
P
PrintablesBryan

Autopilot box for MSFS

This is a relatively simple autopilot box based on the Kodiak 100. It uses an Arduino Mega for Mobiflight connectivity. More information, and all project and control files, are hosted on GitHub:…

Downloads
44
Likes
6
Rating
0
P
PrintablesLord_of_Shred

Bigtreetech SFS 2.0 Filament Sensor Voron 0.2 back mount

I wanted to add the SFS 2.0 to my Voron 0.2R1 and make it as easy as possible. Since I use a filament dryer as source for the filament the spool holder was sitting and collecting dust. The SFS can be mounted instead of the filament holder…

Downloads
44
Likes
8
Rating
0
P
PrintablesMatze

BTT SFS 2.0 Vertical Mount with stock M3s with 6mm distance

Thanks to Chado for uploading the step file and SapuSeven for the original model. I needed more space for thicker panels (4mm panels with 3mm foam), so I added a fourth hole to allow the mount to be used in both directions.

Downloads
43
Likes
11
Rating
5
P
PrintablesКирилл

K1C BTT SFS2. Spool holder

Держатель катушки с датчиком SFS. Оригинальный держатель(трубка) катушки подходит. Оригинальные винты наверно будут коротковаты,использовал точно такие же,но чуть длиннее. Нижнее отверстие у меня почему то не подошло по модели K1,может в…

Downloads
43
Likes
4
Rating
0
P
PrintablesMarcin1415

BTT SFS v2.0 Smart filament sensor mount

BTT SFS v2.0 Filament sensor mount on 3030 profile for Ratrig V-Core 3.1 Enclosure 2.0 You need for assembly: 1x M6 Cap head screw 12mm 1 M6 T-Nut for 3030 profile 2x M3 Cap Head screw 12mm Print at 40-70% infill with support. PLA, PET-G,…

Downloads
41
Likes
5
Rating
0
P
PrintablesErik Kallen

BTT SFS V2.0 Holder for Voron Micron

I adapted a panel clip of my Voron Micron to allow attaching a filament sensor to

Downloads
41
Likes
2
Rating
0
P
PrintablesCarmelo Padula

Creality K1 MAX BTT SFS bigtreetech filament sensor v2.0 holder bracket

bigtreetech smart filament sensor v2.0 bracket for creality k1 max only Two M3 OD= 5mm insert needed no support

Downloads
40
Likes
7
Rating
0
P
PrintablesMr Summers

Dual Gear Extruder & BTT SFS Hard Mount - 1.0.0

This will allow you to hard-mount your BTT Smart Filament Sensor without a bowden tube coupled on both the SFS and your extruder and works on most bowden tube printers with 2020 rails. This is particularly useful if your extruder doesn't…

Downloads
40
Likes
7
Rating
4.5