Search results: shelf

Sort order

11,007 models

P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant

Downloads
16,512
Likes
4,050
Rating
4.93
P
PrintablesMikolas Zuza

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant

Downloads
5,195
Likes
1,351
Rating
4.94
P
PrintablesJKM

Corner shelf for thr bathroom

2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…

Print approx. €13.77–€16.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,990
Likes
74
Rating
5
P
PrintablesFrasse16

Bathroom corner shelf - No drilling

This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…

Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant

Downloads
1,082
Likes
395
Rating
4.94
P
PrintablesAndreas G

RAID Shelfs for 3.5 (and 2.5) drives

Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.

Print approx. €3.65–€4.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
977
Likes
330
Rating
4.83
P
PrintablesJordanBurghoff

HomePod mini wall outlet shelf

This is a wall outlet cover that has a removable shelf for the HomePod mini. It compactly hides the cable inside and creates a nice, stable shelf for the HomePod while keeping the other outlet free for use!

Print approx. €4.49–€5.49 excl. taxPreliminary estimate for one variant

Downloads
685
Likes
114
Rating
5

Intermediate level for shelfs

You can see in the pictures how to set it up. I used used seven 3,0mm x 16mm wood screws. The G-Code is made for Filamentum PLA. If you want to slice it yourself, make sure to set “Loops” at the “Skirt” settings to 0. The print needs the…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
654
Likes
619
Rating
4.67
P
PrintablesDanielAlex

Star Wars Hangar Shelf V2

Small display shelf inspired by the hangar of an imperial star destroyer from Star Wars. Designed for vase mode. 18cm x 16cm x 10.2cm on the outside, about 17cm x 13cm x 9.6cm on the inside. It barely fits on a prusa mini. Its sturdy…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
523
Likes
161
Rating
5
P
Printableszethos

Stackable Shelf for Raspberry Pi Argon One V2 or Other uses

I needed a way to stack my Argon One V2 cases for Raspberry Pi 4s. I didn't really find anything that fitted my needs so decided to design one. This is my model that I've designed and made available. You can print as many of the…

Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant

Downloads
513
Likes
73
Rating
5
P
PrintablesTNT_Mister

Topology optimized shelf bracket

Topology optimized shelf bracket for a small shelf with a depht of 10 to 15 cm. You can mount it to the wall with 4-6mm screws and secure the board with a short screw through the top. The model can be printed perfectly without supports.

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant

Downloads
406
Likes
106
Rating
5
P
Printableschking

RepRack Shelf

A shelf designed for the RepRack: Open Source Spool Holder And Storage System by Repkord ( https://www.prusaprinters.org/prints/129024-reprack-system-by-repkord ). If you print this without top or bottom layers you save a bunch of…

Print approx. €5.83–€7.12 excl. taxPreliminary estimate for one variant

Downloads
404
Likes
77
Rating
4.89
P
PrintablesShinobi42

NAS Shelf

This construction was made to combine a raspberry pi 4 in its cooling fan equiped case with two external 2.5" hard disk drives as a self made NAS built with OpenMediaVault. The required USB hub is not part of this built, I keep it in a…

Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant

Downloads
386
Likes
85
Rating
5
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
385
Likes
50
Rating
5
P
PrintablesYozhik

Larger, Huge Shelf for HSW

Due to my inability to find a much larger shelf than the ones available for download on the original HSW page, I made one by myself. This shelf is much wider, and deeper, and consists of 2 pieces that have a small tolerancy and should…

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
362
Likes
58
Rating
5
P
PrintablesMrViddy

Benchy Shelf Display Rack Holder

Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
84
Rating
4.25
P
Printablesmrplyuh

Полка для зубных щеток и тюбиков пасты. (shelf for toothbrushes and tubes of paste)

При нормально настроенном принтере модель печатается без поддержек

Print approx. €10.70–€13.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
316
Likes
34
Rating
0
P
Printablesmicahbowerbank

Custom under coffee table top shelf basket for my remotes

Custom under coffee table top shelf basket for my remotes

Print approx. €6.96–€8.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
300
Likes
34
Rating
5

Coffin Bookshelf w/double doors + empty version

Since this model uses bridge infill as the door texture, it's recommended to use Classic instead of Arachne. I provided models with NO shelves and also clean fronts so you can do your thing.

Print approx. €5.76–€7.03 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
151
Rating
5
P
PrintablesJSeppl

Strong wall bracket with round bar support. / Shelf Bracket / Regalkonsole

Strong wall bracket with round bar support. -- A round bar with a diameter of 20 mm is required for the print. The round bar must be angled at the ends and must rest against the wall and the overlying wooden board. Printed with 0.4 nozzle…

Print approx. €4.29–€5.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
292
Likes
127
Rating
5
P
Printableskitsuno

Wallmounted Plant Pot Shelf Support - Escuadra para montar maceteros en pared

Soporta macetas pequeñas pero se puede escalar para soportar maceteros mas grandes.

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
62
Rating
0
P
PrintablesBob the Builder

LEGO Brick 4 shelf (5x original size)

The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…

Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
50
Rating
5
P
PrintablesCelta

Closet shelf pin

Replicated the pins that came with the closet and made them a bit bigger to hold the shelves better and with a tighter fit. Printing In order for the part to have good structure, the printing orientation should be parallel with the pin.…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
232
Likes
43
Rating
5
P
PrintablesWanderWardr

FIFO Can Shelf XL

A First-In-First-Out dispenser for food cans. Snaps together for hardware-free assembly. The modular design can be expanded to be as large and as small as needed. Please read the instructions before printing, as this design is quite large…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
222
Likes
48
Rating
5
P
PrintablesBUDS3D

NEST CAM INDOOR/OUTDOOR DESK /SHELF MOUNT

GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE FOR A PERMANENT FIT. LISTED ARE TRIED…

Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant

Downloads
217
Likes
19
Rating
5
P
PrintablesmoWerk

Bedside shelf and phone holder - fits 3cm boards

Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…

Print approx. €7.31–€8.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
210
Likes
37
Rating
5
P
PrintablesVastasStudio

Wave Shelf

A shelf inspired by the shape of waves for storing towels. Dimensions of the shelf (LxWxH) 220mm x 102mm x 10mm Height for doble-sided tape 17mm Material PETG or Any Mounting: Add pieces of 10mm double-sided tape ( 3M tape recommended )…

Print approx. €7.57–€9.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
208
Likes
154
Rating
5
P
PrintablesDavid

VW california t6.1 shelf holder

Print with supports sideways, PLA was tested and works nicely in Cali.

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
201
Likes
9
Rating
0
P
PrintablesMu4

Skadis Top Shelf 20cm or 18cm Width and 18cm Depth

Thanks to Just Joshi for this original part. The Shelf has a depth of 18cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. For the 76cm Skadis board you take 2x 18cm + 2x…

Print approx. €6.92–€8.45 excl. taxPreliminary estimate for one variant

Downloads
181
Likes
19
Rating
5
P
PrintablesBoPrinting

Shelf Pin Jig 5mm - Lochreihenschablone 32mm / 5mm

Die Lochschablone hat einen Abstand von 32 mm und einen Bohrungsdurchmesser von 5 mm . Zusätzlich werden 4 Kugellager 625 benötigt. This Shelf Pin Jig has a spacing of 32 mm and a bore diameter of 5 mm. Additionally, 4 ball bearings 625…

Print approx. €2.57–€3.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
176
Likes
20
Rating
5
P
PrintablesRNeese

Network Switch Shelf

I really hated having the small network switch sitting on my bench. It took up valuable real estate. So I created this shelf. This network switch shelf is made for a Netgear switch ( the model number is in the picture ) and power supply…

Print approx. €17.23–€21.06 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
54
Rating
0
P
PrintablesXDEnte

Robuster Regalwinkel für DIY-Regale – Sturdy Shelf Bracket for DIY Shelves

Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…

Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
19
Rating
5
P
PrintablesMarius Bendsen

IKEA Shelf Support Pin (HEMNES/BRIMNES) - 110525

Bought a used HEMNES bed that was missing a bunch of these 110525 pins. Printed in two parts and then squezed together. Printed on Anycubic Kobra Neo with 0.4mm nozzle in PLA.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
20
Rating
0
P
PrintablesArtem

Adjustable rope shelf module

Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
195
Rating
5
P
Printablesolekhal

Caulk gun holder shelf mount

I needed a holder to mount caulk guns on the underside of a shelf, in my paint storage cabinet. Remixed the design from SSL, and changed the screw holes to work with 4mm countersunk wooden screws. Recommended to be printed in PETG, ABS,…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
13
Rating
0
P
Printablestom

Abklappbare Ablage (Regal)/ Small fold-down shelf

Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
139
Likes
14
Rating
3
P
PrintablesVorpal

Wall mount shelf for cable modem (Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU)

Wall mount shelf that fits a cable modem "Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU" The supports below the shelf doubles as convenient points to tie the cables to. The hexagonal holes in the shelf are for ventilation, as the modem has…

Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
15
Rating
0
P
PrintablesSweet1227

Dry Box Dessicant Shelf for Cereal Box

I love Prusament, but got tired of the dessicant balls getting stuck in the Prusa Hexes on the spools. I have regular kitchen cereal dry boxes and used to keep the bottom filled with dessicant. Now this shelf separates the spool from the…

Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
116
Likes
19
Rating
4.5
P
PrintablesDenny89

Small hanging shelf for a modem/router

Small 240x125mm shelf for a router or modem that can be hung on a 19mm wide ledge. You'll need 4x M3 square nuts and 4x M3x8 or 4x M3x10 screws ; grab them from the printer's spare bag if you still have it. Installation: Put the nuts into…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
28
Rating
0
P
Printablessteffenbew

Tefal Snack Collection Storage Shelf

Storage shelf for up to 8 plates for the Tefal Snack Collection waffle / sandwich maker. I added the support beam after I printed the body to reinforce the structure. An improved model could have wider carriers and better support…

Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
16
Rating
5
P
PrintablesnKirketerp

Levitating bookshelf

I've been seeing these levitating bookshelves and thought I would make my own The shelf holds medium-sized books and works best with a hard cover as the bottom book. I tested it in PLA with 4 perimeters and 30% infill and it held 2.5 kg…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
28
Rating
5
P
PrintablesRahul

Fridge Storage Divider – Shelf Organizer

Keep your fridge tidy with this simple storage divider! Designed to separate items like bottles, sauces, snacks, or leftovers on fridge shelves. just print and slot it into place, no tools needed, and works with most fridges but designed…

Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
31
Rating
0
P
PrintablesYamiGhor

Folding shelf

Easy to print folding shelf for reduced spaces like campers, caravan or whatever and with no holes! RECOMENDATIONS Printed with PLA. Infill 20%. I used 0.2 layer. 2-3 wall count. The support face flat so the double face tape will stick…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
40
Rating
0
P
PrintablesVorpal

Dacia Duster 2018 parcel shelf/trunk cover cord washers

Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
9
Rating
0
P
Printablesredtahr

shelf hoook/bracket for the outside of metal shelving frames

printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
18
Rating
0
P
PrintablesImagine_3d

RepRack Adapters for Muscle Rack Heavy Duty Shelf (two versions)

A set of two different RepRack Wall Cleats/Adapters for Muscle Rack Heavy Duty Shelves. There is a single-hanger version and a double-hanger version (pictured). I wanted a nice way to mount a RepRack above my printer in the unused…

Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
26
Rating
0
P
PrintablesPrinter4496

IKEA SKADIS Shelf Edge or Whiteboard Mount

Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
5
Rating
0
P
PrintablesMax Aalderink

Argon Neo 5 shelf

This is a shelf for the Argon Neo 5 (with NVME expansion) case for the Raspberry Pi 5. It has a ventilation duct in de back for case fan exhaust and a perforated bottom for the NVME heatsink. The mounting holes are designed for M3…

Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
4
Rating
0
P
PrintablesIshaan_B

Minimalist 3D Printed Desktop Table / Shelf Brackets (scalable)

Minimal design. Maximum strength. 📐 Dimensions (for your model page) Plank size used (based on your drawing): • Width: 12.6 cm • Height: 8 cm • Length: Optional / customizable Slot in the printed part is designed to match: • Slot width:…

Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
50
Rating
5
P
Printablesjen.e.moore

Shelf divider

A simple, lightweight clip-on shelf divider for some 5mm glass shelves. Based on the design of the wire ones you can get from The Container Store, but I didn't want to try the metal on glass shelves. Created in OnShape; there's a larger…

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
22
Rating
0
P
PrintablesCreativus

Hexagon Led Flower Pot Lamp Usb Shelf - Lithofanes Visor Led

I printed this in white pla but you can make it any color and material you want. There are 2 models: one for the flowers pot that takes 8.00hrs and another that is a litophane visor that takes 4 hours. It's usb powered and it is A++…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
43
Rating
0
P
PrintablesAndreas_O

Modular Bookshelf - Connector - Honeycomb wall storage

Printed on XL could be unstable on bedslingers. Printed with 0.4 Nozzle and PETG

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
65
Likes
30
Rating
0
P
PrintablesMaYo

hex bathroom shelf organizer with drainage v1

ENGLISH Bathroom organizer/shelf for shower gel, razor, soap, washcloth, hairbrush and much more. The sloping base plate allows the water to drain to the front. Water no longer accumulates under objects that are on an elevation. It stays…

Print approx. €6.70–€8.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
63
Likes
18
Rating
0
P
Printablesrlfigueiredo

Display Shelf for Miniatures

Here are the dimensions for each stl file: display-shelf-160mm-with-(square-round)-legs Width : 160mm Depth: 200mm Height: 160mm display-shelf-200mm-with-(square-round)-legs Width : 200mm Depth: 200mm Height: 160mm

Print approx. €4.56–€5.58 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
16
Rating
0
P
PrintablesFaGrie

Shelf holder organic - Regalhalter organisch - shelf bracket

Regalhalter für Holzbretter, sehr stabil und im Design ansprechend. Versteckte verschraubung für 3-3,5mm Schraubendurchmesser. Shelf holder for wooden shelves, very sturdy and attractive in design. Hidden screw connection for 3-3.5mm…

Print approx. €2.60–€3.17 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
12
Rating
0
P
PrintablesJPMakesStuff

Drill or drive pack under shelf mount compatible with Ryobi

A simple mount to keep your Ryobi drill or drive packs under a shelf. Use two business cards as a spacer between one mount and the Ryobi pack to get the spacing right before screwing into your shelf.

Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
25
Rating
0
P
PrintablesMarek Zítka

Gorenje Fridge Door Shelf

Gorenje Fridge Door Shelf Made to fit to my Gorenje fridge, however I'm sure it will fit to many fridges from many vendors. Just check out dimensions from drawing or its screenshot. Gcode is sliced in PrusaSlicer 2.6.0 alpha3 for 0.6…

Print approx. €5.81–€7.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
14
Rating
0
P
Printablesjonashedlof

Shelfs and tool hangers for benches or wall mount

Different type of shelf support for screwing. I used DIN rail mount in back. Good for working benches. Several different types of shelfes in step file. Load in slicer, split object and print each seperately.

Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
9
Rating
0
P
PrintablesDokkie

Insert into caravan shelf

Insert for a caravan shelf, which doesn't have a lip or anything so things fall if you open the door. The insert is cca 230 x 100 mm , with a cutout for a hinge. There are two versions, V1 and V2. V1 is what I printed and the walls are 2…

Print approx. €7.14–€8.72 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
21
Rating
0
P
PrintablesLevoniust

old - Roller caster support for a plastic shelf unit - old

This version broke on my and I have remade it in Fusion 360. Please use this model insted!!! I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of…

Print approx. €7.27–€8.88 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
8
Rating
0
P
Printablesdankat

IKEA Bror Shelf - Hinged Door / Enclosure

Summary I have cats, and they are curious when the printer starts printing. So I needed a way to keep them out. What started out as taping some plexi glass to my IKEA Bror shelf turned into this. We'll see where it goes from here.…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
17
Rating
0
P
PrintablesBen

Slim File & Magazine Holder for IKEA Billy Shelf

Bring order to your Billy shelf – with this slim, custom-designed file and magazine holder! This model is precisely tailored to fit the IKEA Billy shelf , making it ideal for neatly organizing loose papers, magazines, notebooks, or A5…

Print approx. €6.39–€7.81 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
14
Rating
0
P
PrintablesLevoniust

Roller caster support for a plastic shelf unit

I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of printing I got this. Amazon.com: HDX 128974 36 in. W x 72 in. H x 24 in. D 5-Shelf Plastic…

Print approx. €19.10–€23.34 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
1
Rating
0
P
PrintablesHarabi

Shell Model Car Display shelf (1:41)

The model car shelf / display is designed for the 1:41 models what you can get from Shell. It has some space so you can put a slightly bigger car into it as well. The hole parameters: clearance, normal fitting, ISO M3 The track has only…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
8
Rating
0
P
PrintablesThe Consul

L Shelf

Very simple L shelf, with and without supports. Not for heavy weight items.

Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
4
Rating
0
P
PrintablesZatnaktel Cz

Shelf back hook

Hook should be mounted from the back of shelf in your wardrobe. Supports are recomended.

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
18
Rating
0
P
PrintablesBrian Berkley

AIS Divi cube system Cube Shelf

This is for an Interior Concepts cubicle system, where two wall panels meet. The brackets span 16mm gap, and assemble with M4 hex head bolts and nuts. 4x M4x30 and 4x nuts required. I used painted on supports for the hex nut cutouts in…

Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
11
Rating
0
P
Printables3uDo

Stütze für Regalboden, anpassbar | shelf support, customizable

Da nach einiger Zeit das Regal etwas durchhing habe ich nach einer Lösung gesucht. Es wurde dieser einfache Abstandhalter. Abmessen…drucken…anbringen…fertig! Über die Fusion360-Datei kann sich jeder seinen passenden Abstand (siehe grüne…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
1
Rating
0
P
PrintablesBitScout

Shelf that goes on top of a brother HL-2100 or HL-2200 series printer

Requires: Four 3.5 mm x 30 mm screws A board or tablet of sufficient size (see below) Four pieces of 10 mm x 10 mm aluminium extrusion of equal length, roughly 10 cm are good. Your tablet needs at least a flat surface that is 370mm wide,…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
13
Rating
0
P
PrintablesDennis Judd

Dryer ball shelf

This is a remix but I put a lot of tweaks on it. I wanted something that could hold multiple sized balls but also attached to the wall near by. The STL is a solid piece that I split using the cut tool in prusasclicer 2.6 with 2 pins to…

Print approx. €15.34–€18.74 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
2
Rating
0
P
PrintablesmoWerk

Hole cover for 5mm pre-drilled shelf levels - IKEA PAX and others

Ikea systems are quite versatile to fit a large range of customers wishes with one model. This however means, you have to deal with the cosmetic flaw of uncovered 5mm holes all over the insides. From pre-drilled options for board…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
7
Rating
0
P
PrintablesKoolio64

Policka do sprchy/Shower shelf

Polička na sprchovou tyč o průměru 24mm, jednoduchý upevňovací mechanismus. Bude možná potřeba jemně obrousit vnitřní hrany upevňovací vložky, ale jinak funguje a drží hezky. Shower pole shelf, hole diameter 24mm, simple fastening insert.…

Print approx. €9.93–€12.13 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
4
Rating
0
P
PrintablesOtty_Skipper

IKEA Tisken Plastic Ducks Shelf

It was just a fun project for my wife. "a happy wife is a happy life" Original rubber ducks also fit, but only the small ones.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
11
Rating
0
P
PrintablesEmily Unsworth

Desktop shelf for Stationary

This model can be used to hold basic office supplies like, stapler, pens, sticky notes etc.

Print approx. €7.12–€8.70 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
3
Rating
0
P
PrintablesCHEN

HK 416D show shelf

This item can support your HK416D. Please don't let your beloved weapon lie somewhere, let it stand up and show it to your friends. Since private ownership of guns is not allowed in our country's laws, this is the parameter of 3D printing…

Print approx. €12.63–€15.43 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0
P
Printablesastro3DPman

mele quieter4c shelf for ioptron GEM45 on literoc tripod.

I am of the “keep everything off the OTA” camp vs. “put everything on the OTA but the kitchen sink” camp. With that in mind I designed and printed the models you see on this page. I share the mele with a “permanent” iOptron 360 tri-pier…

Print approx. €5.25–€6.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
1
Rating
0
P
PrintablesLevi

Cosco Step Stool Shelf

Brackets that stick to the back side of a cabinet or door to store away a step stool. Uses the Command velcro strips to adhere to any surface. No need to drill holes. Print Settings: Transparent PETG 0.8mm nozzle 0.55mm layer height…

Print approx. €3.13–€3.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
5
Rating
0
P
PrintablesLaHo

Simple soap shelf

Another simple soap shelf. Use supports for shelf. Mount it with two 4x30mm screws.

Print approx. €4.35–€5.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
2
Rating
0
P
PrintablesMikyner

Shelf for spices (Cooker hood BEKO CWB6730X)

Shelf for spices (Cooker hood BEKO CWB6730X)

Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
4
Rating
0
P
PrintablesOnur SÖYLER

Bookshelf

does not require support

Print approx. €21.88–€26.74 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
4
Rating
0
P
PrintablesMax Mühlstädt

Filamentguide for heavy duty shelf

This coupling part is used to safely guide the filament for the MMU2S from one level to the next, where the printer is located. The holes are 9.5mm in diameter and so PC4 M10 couplings fit perfectly. The part is intended for a material…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
2
Rating
0
P
PrintablesJay Bennett

Under monitor shelf insert

Yet to print, just hosting on printables for more backups of my models

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
0
Rating
0
P
Printablestom

Regal für Bonsaitopf mit Balkonbefestigung/ Shelf for bonsai pot with balcony attachment

Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
5
Rating
0
P
Printableslebalz

Axivity AX3 Sensor Shelf

A simple storage rack to take up to 5 Axivity Sensors. The micro-usb port of each sensor is accessible through a hole. Can be printed without supports when the model is sliced with it's backside on the print sheet.

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
0
P
PrintablesRetroTechy

Floppy EMU Case with shelf mount and icons

See the description on the djos_1475's part I remixed. Note that you can use just my front (or back) with the rest of the parts; they should all intermix just fine.

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
2
Rating
0
P
PrintablesJacko65

Magnifier Glass Holder for on shelf

I fits for Magnifier glass diameter 10.5 cm , handele 1.3 cm , fitting on wood shelfs 1.8cm i printed it with skull up and with support , to have clean front.. be free to use and modify . it's maybe not perfect but does the job ..

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
PrintablesStringsIV

Top Shelf for Small Parts Cabinet with Recess for NHXX/7SXX Movement Holder

I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.

Print approx. €2.43–€2.98 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
8
Rating
0
P
Printablesmatheo langlois

equaire for shelf

I modeled this equaire to make myself a shelf

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
Printableskiki-print

Remix Cute Hanging Bookshelf Signs for printing on the Prusa Mini

Remix Cute Hanging Bookshelf Signs for printing on the Prusa Mini

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
7
Rating
0
P
Printableskevsparky

Klarstein 201L Beer Fridge - Shelf Extensions

This model extends the shelves of the Klarstein frides by 5mm, exactly the same length of the ledge they normally sit on. That means, if the shelves start to slip off the ledges of the fridge, these extensions will fit perfectly, and keep…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
3
Rating
0
P
PrintablesKazuyamano

Inner shelf for Seria accessory case

セリアのクーラーボックス型小物入れを2階建にするスノコをつくってみました。少し改造すると写真のようにイエティ風ウェッティケースになります。(ウェッティケースのアイデアはYouTubeで発見したものです)*for Japanese only

Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
Printablespik0

Sears/Whirlpool Coldspot Freezer Shelf Support Hanger

My 1968 Sears Coldspot Freezer failed to defrost which caused the condenser cover to bulge and pressed against the shelf bracket breaking this ABS plastic part. Highly recommend printing in PETG or ASA as this part will have to survive in…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
3
Rating
0
P
Printableschris

IKEA Tornviken Filament Shelf Storage

The IKEA Tornviken , although marketed as a kitchen island, also serves as an excellent table for desktop-sized 3D printers. In Germany, it's available with a 72x52cm footprint, making it an ideal base for the Core One printer. It…

Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
7
Rating
0
P
Printablesiqless

Funko Narrow Magnetic Shelf (RTS20)

This purchase includes a sub license RTS20 RTS20 = Right to Sell 20 With this purchase, in addition to the set license, you have the right to sell 20. The included 3mf file has a pause set for placing the magnets. If you want to create…

Print approx. €4.57–€5.58 excl. taxPreliminary estimate for one variant

Likes
2
Rating
0
P
PrintablesRyan Millar

Honeycomb Display Shelf (No Supports Required)

Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…

Downloads
33,788
Likes
17,593
Rating
4.94
P
Printablessdgsean

Ikea Skadis Shelf / Tray

Different sized shelves / trays for your Ikea Skadis wall. 1 Extra Long or 2 Extra small shelves will fully span a 36cm wide panel. (The Extra Long may be beyond most printer beds). To get the 2 Extra Smalls to span the distance, you'll…

Downloads
19,685
Likes
3,659
Rating
4.9
P
PrintablesLinkDesigns

Stackable Shelf Organizer

This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with…

Downloads
18,323
Likes
5,235
Rating
4.95
P

Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.

Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…

Downloads
16,091
Likes
4,017
Rating
4.88
P
PrintablesFunkyArt

Lunch atop a shelf (StarWars Troopers)

A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…

Downloads
13,180
Likes
4,991
Rating
4.98
P
Printables2be3dprinted

Shelf support bracket Honeycomb Hexagon

Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…

Downloads
11,251
Likes
5,879
Rating
4.96
P
PrintablesRyan Millar

Display Shelf Wall Assembly (No Supports Needed)

These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…

Downloads
10,551
Likes
4,380
Rating
4.95