Desk organizer - display shelves
display all your bits and bops on these shelves - 15 x 5 cm shelves
- Downloads
- 2,332
- Likes
- 811
- Rating
- 4.33
Counting matching models…
display all your bits and bops on these shelves - 15 x 5 cm shelves
Organize that Skadis! Download these Skadis compatable organizers today, and keep your workspace free of pens and benchies 😉 This design uses the Skadis T-Clip System by Will , you can download the required clips from there! You will need…
Update Hollow version of all 4 sizes posted and tested. Stl, bgcode and 3mf files updated. Hollowing saves nearly ⅓ filament at roughly the same print time. Below pictured test print failed due to user error. But even with the 90%…
Introduction I designed these hex shelves to organize my benchy collection. I wanted a way to record both the material properties (manufacturer, material, color name) while displaying a benchy and this was my solution. I have uploaded…
cardboard shelves from up-cycled cardboard boxes. organize your stuff with up-cycled cardboard boxes in a construction similar to dexion. assembling time, approximately 1h30m (for 3 shelves) what you will need to buy (approximately 3€)…
If you have loads of Prusament Spools leftover and want to make something out of them, Try this set of shelves for displaying your prints. The Leg connectors are for connecting two legs together or for the top shelf. The shelf connectors…
This is a spice shelf for the standard diameter spice containers. They lock together using the tabs on the bottom to form a full circle. You'll likely need to adjust the diameters for your specific application.
Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…
MGA's Miniverse Make It Mini Lifestyle comes with shelves however some of the toys don't actually fit on them. So this is a larger version of what the shelving that comes with the toy so the toys actually fit on it.
I have designed these 3D printed connectors to improve the function that is usually given to Ikea KNAGGLIG pine wood boxes (art. no: 702.923.59), such as shelves or small tables. With them you can join two boxes, and with a simple…
you will need 2x 6mmx40mm pins to secure this hook, the same that come with the shelves are fine, or you can use any 6mm rod, or you can secure with screws instead edit: I added files for a pin to secure in place if you don't have the…
Ok, super specific use case, but who knows? It'll maybe be useful for someone, or at least for inspiration for someone. Made a holder for my Pendix ePower 300 battery so I have a fixed spot for where the battery would charge. It slides…
This collection will be updated with new models from time to time! Ideas and suggestions on sizes and features are welcome! For full collection and editable STEP files, please purchase the full pack from here: Full Pack Download Modular…
About: Want to attach your existing gridfinity bins to your new multiboard wall or just use the existing containers you already printed? This is just the right solution for you. Just download some multiboard connector , connect it to your…
Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
Shelf for Skadis board. Designed in 3 parts so you can easily use different colors. Short Shelf spans across 3 pegs and long shelf spans across 5 pegs. Pictures show stained wood PLA and black PLA.
This 3D printed wall bracket is designed to support wooden shelves in a stylish and functional way. With a sleek angular profile and a central cutout, it combines strength and minimalism, making it ideal for modern interiors. The bracket…
Set of 5 different style Shelves for Honeycomb Storage wall. Shelves are 100-120mm wide and 50-60mm deep. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little…
Height is specified in the print file title. The shelves interlock, as shown. 3in and 6in tall shelves are shown. cabinet is 20.5" wide. Shelves allow for storage underneath them for duplicate spices or anything really. Feel free to…
Liked the original design as it is a quick and easy print. I have adjusted pin distances so they fit on Montgomery and Pinnacle branded shelving from Bunnings. Montgomery - 1mm metal thickness, ~33mm pin distance Pinnacle MDF - 1.5mm…
Create a stylish and functional display with our 3D-printable hexagon shelves. These modular shelves feature built-in LED lighting for an eye-catching effect. The cable management system ensures a clean and organized look, allowing you to…
Honeycomb Shelves with easy hang center hole. three sizes to download. Easily scalable to desired size. Small: 122mmx137mmx45mm Medium: 183mm x 206mm x 67mm Large: 244mm x 275mm x 90mm Pictured are mediums printed in Prusa black PLA.
I really liked Shotime369 's mushroom shelf I cleaned up the geometry and made a few sizes (S, M, L) and mirrored versions for all three. The large size should just fit on an Ender / MK3 bed. No supports needed (really). Enjoy.
8 sizes of display shelves for your Honeycomb Storage Wall. The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it's probably not a good idea to use low…
Assembly: Put some CA glue (super glue) in the holes and insert the pegs. I recommend gel super glue. 40, 60, and 80% scale use a single peg, so they're decorative only. Use “peg_short” for these. 100–200% scale use two pegs, and can…
A desk tidy with slightly angled shelves and two spots on the bottom to attach to a desk with 25mm VHB tape (0.6mm indents). Print on its back (Hex side). I recommend 3D honeycomb fill with 10% infill and 3 walls/top/bottom. No supports…
These are Tamiya Paint Holders for use on IKEA Skadis pegboard. Skadis_Tamiya_2 and Skadis_Tamiya_4 are for the Mini 10ml bottles. Just added 23ml version, this is too big, cup inner diameter is 45mm.... v2 added, which should be inner…
Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
New: I made a new version of all 12 shelves with a back with Bolt Holes for the Large Multiboard Bolts. I use the 9mm Flat Head . You can use longer if you have your tiles spaced from the wall. These will hold a lot more weight then the…
The existing shelves lacked consistency with the original container by Preb, so I designed a parameterized version that uses the same latches as the box to hold the shelf segments together. The top plate can also function as a Gridfinity…
This shelf bracket is designed to fit the Ikea Burhult shelves( https://www.ikea.com/us/en/p/burhult-shelf-white-80400042/ ) But any shelf with the same dimensions will fit. The screw holes are made to fit screws with a head width of…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
I wanted to label the various spaces on my Heavy Duty Metal Storage Shelving Rack in my home office. I've designed it to nicely hold Avery 8860 labels (1 in. x 2 5/8 in.) so I can easily 2D print nice clear labels on my ink jet printer,…
I designed a few shelves for below my monitor with roller shutters and I integrated two USB-hubs. As mentioned in some comments, the whole thing is a little bit challenging to print and to be honest the roller shutters open and close just…
Warning: Those shelves are not meant for gridfinity. If you are looking for those, please click here . Also note that multiboard did change their bin design after I created those bins….so maybe use the official solution instead. About:…
I was looking for a larger piece of furniture to throw some 3D Printers on and have plenty of storage. Many "lacked" the space I wanted, or were way out of budget. I'd previously built a Lack enclosure, and was extremely happy with the…
I made this for my Brickheadz collection. The tolerances are very tight, they need to be, to keep the shelf sturdy enough once you start connecting more than a few of them together. They can be a little difficult to fit together if you…
Because we all know hexagons are the bestagons and tessellate so well I have designed a parametric openscad file to create hexagon display stand that fits into a shelf to display the things you collect, it is angled top to bottom to allow…
Now Playing and Standard Vinyl Shelf to display record covers. Shelves are supported by standard Ikea screws. Material: PLA Layer Height: 0.16mm Infill: 50%
This is a customizable corner tiered shower shelving system. This was intended for the corner of our shower, but you can create a corner multi-shelf system for anywhere. The Pieces: The system consists of basically feet, poles, shelves,…
Set of shelves that can be stacked (almost) indefinitely. Designed for Warhammer 25, 32, 40mm bases. You may want to glue columns to the bases, but it is completely optional. Bases on the pictures were assembled without any glue. Only for…
This is a collection of shelves and legs/supports that fit together and allow you to build small custom shelving, perfect for small spaces like cabinets and small things like spices, paints, etc. The Fusion 360 file is also provided, in…
Snap Together Mini Shelves Lightweight shelves to go on your shelves. (On the off-chance you sweat the small stuff) Long pegs are for middle shelves. I glued mine with CA glue for good measure. PLA Pro .2 Layer height No supports Enjoy! ……
Update: I added a practical and sturdy Shower Head Holde r to this shelving system. You can find it here . This is an elegant modular shelving system for your shower rail. Features: two dish sizes, one for soap bars and a longer one for…
BUNK | Stackable shelves for bathroom & kitchen Compact and stackable shelves to help you organize your bathroom or kitchen counter. They print fast and are entirely support-free. There are 3 sizes for the stand, that can clip onto the…
About: Want to attach your existing gridfinity bins to your honeycomb storage wall (HSW) or just use the existing containers you already printed? This is just the right solution for you. Just download some HWS multiconnect connector ,…
Simple hook for a chelving with perforated racks. The dimensions of the holes in the sketch are in millimeters. May be can work with other perfo panel and so on.
RepRack is BACK! Quick Overview: https://www.instagram.com/p/DZ07thcPyC0/ RepRack2 Features: Fully Reversible: Suspension style OR under mount bracket (corbel) style. Still good for filament but now you can easily make shelving too!…
This is a remix from Mima19. https://www.printables.com/model/280311-skadis-shelves I need the shelf to be a bit bigger, so did this 3 new sizes, a Short (L), Long (L) and Long (XL). 04/05/24 - Add extra support for the Shelf Long (XL)
This is a remix of "Hooks for keyhole slot shelving" by Scoo. I took the original spacing and base design, but modified the geometry so that the hook can be printed on its side completely without supports. I also created a large hook from…
These are simple and sturdy hooks that clip on to virtually all wire-rack type shelves that you find in closets, shop shelves, kitchens, pantries, etc.. You can use them to organize cords or hang tools or whatever. I use them a lot as I…
I printed at .16 layer height, with 10% lightning infill as the objects I was putting on it are extremely light. Scaled to fit Bambu Print bed. can be mounted with command strips or a tiny nail. I am using command strips on mine. Can…
Modular shelf to house Funko Pops, expandable when needed. Uses 4x3mm magnets to hold the front. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 10% Filament: EcoPLA by 3DJake PLA Category: Household
Here is a set of Shelves and Holders for your glue sticks or any similar size tools/items. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little sanding will be…
Supports will be needed when printing the album name plates. No supports necessary for the shelf prints. Print with 0.20mm in either PETG and PLA. Album name plates are designed to be removed/replaced in case of accidental damaged during…
I liked the idea of using these mushroom shelves to use as fridge magnets, but I prefer to use 12x3mm magnets, so I modeled some. I used the origional models as a starting point, repaired, reoriented them, then added the holes. The holes…
I was tired of my other printed s hooks falling off my wire rack. These hug the wire rack a little tighter and therefore won't flop around as much when you go to hang stuff on 'em. the light duty works for hat weight items, heavy duty for…
General. Modular shelves for the 5x4 Gridfinity light cases by Suit, in 6U, 9U and 12U heights. I've designed these shelves for storing 5x4 cases in the van. To stop the cases sliding out they are held in place using a lip along the front…
Cute little books for your cute little bookshelves: Easy-to-print quick customizable with: paint, stickers, the text feature in Bambu Studio, etc… Commercial Membership available at: https://www.patreon.com/Sn1p3r_Pr1nt3r88
There are 4 total pieces, the full coffin is split into quadrants. Each piece should be printed in the orientation you download them in, no supports. Assemble them however you see fit, I superglued the top 2 together, then one of the…
This remix adds mounting holes to the Modular__006 Model.
All the bookshelves are scaled 1:25, the tall ones have 7 fixed shelves and the low ones have 2 shelves. The dimensions should be fairly accurate and is based on the dimensions given by IKEA on their Swedish website together with my own…
These are a set of three miniature bookshelves made for a crafting project. They can be scaled and used for tabletop games or possibly for kids toys/doll houses. The book blanks included are just small rectangles that fit on the shelves…
I have made a number of models of trays and shelves to be mounted on the IKEA Skådis board. The collection of models are available in widths ranging from 40 mm to 120 mm and in depths of 40 mm or 50 mm. Installation The trays and shelves…
Duvar paneli kutuları, kendin yap, duvar malzeme kutuları, atölye duvar kutusu, atölye parça kutusu, düzenleyici stl dosyaları, Dijital İndirme, kendin yap duvar paneli kutuları. pratik ve kullanışlı. delikli paneller için delik askı…
For best strength print this with perimeters only. Use washers. If you get deforming over time (due to too heavy load or too high temperature) you can try PETG or ASA/ABS instead of PLA. With my use case (see picture) the bracket is…
This is a simple and practical book riser designed to create a second row of books on a shelf – because hiding books behind other books is a crime.🙂 The riser is modular and consists of: -a center part (no side walls) -a left wall -a…
Tamiya modular paint system 23ml for IKEA SKÅDIS board. It contains one central module, it can be assembled in any length and finished with a left and right module. Update 27.6.2024 Added version for 10ml Tamiya mini paints
Solid shelves for @WimV's Mini Warehouse . They clip directly onto the horizontal beams (or horizontal beam/crossbeams I made). Both sizes are available (105 and 190). They are rounded at front and square at back (in order to make a…
This is feet and caps for the storage units that Home Depot sells, the HDX Heavy Duty ones. See pictures, this fits the 18 and 24" versions of this same shelving. I used these storage units in a place where I could only use 3 of the…
Set of six different style Shelves for Multiboard. This is similar set like I have done for Honeycomb storage wall (HSW) which can be found here . But in this set I have added one extra shelf and redesigned Shelf Nr6 to eliminate any need…
As there was no io holder yet perfect for my bathroom and application, I made this neat wall mounted station for my Oral-B io 8, it's charger and my toothpaste and brushheads, using two other models on thingiverse (links below). The plug…
Simple cable organizer designed to clip onto IKEA Langkapten desks and Kallax shelves. It helps to keep your cables in place and your setup a bit cleaner. The model was made in Blender using the CAD Sketcher add -on. If you want to edit…
Addon for twin slot shelving sracket to hold what you want (hover part,bags,...) Print the base and the required module : fork, unicor or triceratops.
Inspired by the model “Wall shelf for speakers” by Arkadiy01. Resizing the original could have worked but remixing allowed me to make a few modifications. I added a 2nd screw hole, moved the angled side brackets in line with the back and…
These are customizable, scalable, wall mounted hexagon shelves. You can have just one small shelf at the bottom of the frame, one large one in the middle, or both. These are mainly display shelves. They are compatible with all other…
These hooks fit into the keyhole slots in shelf posts, letting you hang tools and other items near your working space. Dimensions I designed these for the “heavy duty steel shelving” that ULINE sells here:…
Simple stackable boxes or shelves. Scaled at 60%. But scale them as you like. No supports needed.
Storage shelves for your medicine chest/cabinet. Utilized unused areas of your medicine cabinet by sliding a simple shelf in place. Suddenly you have a place to put your items that are not that tall without sacrificing floorspace inside…
These little attachments will allow you to mount the 36x56cm Skadis to the side of the 30cm deep Ivar shelves (both from IKEA). They are very economical, all parts printing in less than an hour total and using about 15g of filament.…
Blackout portion of a LED lighting feature for the IKEA KALLEX shelving unit Using double-sided tape, attach a piece of vellum (semi-transparent paper) to the back (inside) of the panel. Run LED lights along the edge of the shelving unit…
I looked for a simple easy to print hook to help organize my garage. I really liked Bhomas86 design but the attachment points were too close together to fit my shelving. So I scaled the Y axis to 125% and it works great! This remix fits…
Keyboard shelve to free space on your desk
extended the back section to accommodate 3m command strips light duty, for displaying miniatures and prints. Strength tbd.
I had a hanger bar that came with wire shelving and I wanted to have multiple bars on one shelf, so I created this bar hanger and filament holders. If you already have a bar, you can just print the hangers that you need. Wire Shelf Bar…
Update: I have an improved version here . OpenSCAD customizable hook for hammer lock / keyhole storage shelving. The example single hook STL fits my 5 tier Montgomery unit from Bunnings . It likely will fit many others with similar…
This shelving unit was designed to be modular to allow maximum flexibility and to fit DVDs and Blurays. Each piece is printable without supports.
A friend bequeathed me with some extra metal shelves but I didn't have enough spacers to add them to my already-existing pantry shelves so I modeled these based on the originals. If you found this useful, it would bring me great joy to…
Some brackets for steampunk shelves Assebly by 3 screws on the shelf and 4 screws on the wall Print the file in place Category: Decor
Lowes Mini Tote shelving minimalist design. This snaps together and allows you to put two side by side and go tall as you want. Added a looser fit plus shorter single column and XBrace! You have to push these together with some decent…
shelve for 608-xxx bearings.(22mm diameter) -PETG 4x perimeter
When I stored my board games in my Kallax squares, I disliked stacking them horizontally on top of each other and then always needing the bottom one, and I hated storing them vertically and then having the components scrambled inside of…
Few web search closed on the IKEA BROR system. As always, IKEA supply cheap and very efficient furniture. As before with the LACK table, IKEA can supply a good solution for bigger printer enclosure. The BROR shelves system is composed of…
This is my custom solution to the filament storage dilemma. I created this bracket to use wood dowels as the support rod connecting two brackets. You should print in pairs, and use inexpensive 3/4" wood dowels you can buy at your local…
This monitor stand requires no screws or glue if your plywood (or other material for the shelves) fits well. Dimensions are 200mm wide x 140mm high x 20mm extrusion depth. In the slicer, you can customise to your liking, but these were my…
Hat enthusiast? Throw hats everywhere? Want to clean up and save some shelving space?! Look no further than this modular hat rack. Each rack fits 4 hats and can be connected to one another in a line for an unlimited length. Model that has…
OVERVIEW This is the third of a series of furniture pieces developed around a “construction kit” philosophy, in which printer-sized components can be simply assembled with minimal experience to create customised furniture pieces. All it…
This is a hook for Metro commercial wire shelving units . The hook snaps onto the front or side of the wire shelving. There is a difference in the spacing of the wires on the front and sides of the shelf. Print the hook that matches the…