sink hole cover
For 80 mm diameter sink holes, scale on the slicer for different dimensions
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 5,138
- Likes
- 1,673
- Rating
- 5
2,153 models
For 80 mm diameter sink holes, scale on the slicer for different dimensions
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for PETGSource material: PET
Simple sponge holder for kitchen sink. Very easy to print and keep your sink organize. Please feel free to download the version that you need. Happy printing and enjoy my design of the kitchen accessory.
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for PETGSource material: PET
Mine was missing when I moved in. I had a scare once with an earing falling in the sink and decided to act. Printer to the rescue. Here's a link to another improved version that doesn't require any supports: If you’d like to support my…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Info: wrench for badly accessible nuts under the sink long handle (14cm) wrench/nut 12mm for threaded rod up to 8,2mm (which fits inside the wrench middle hole) remixed original (thx volkhen !), because i needed: different nut size longer…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Sometimes you just have a whole that needs to be covered. Easy solution. Use this print, re-size it and done! For me it was a little gabe in my sink that annoyed me for years…finally i fixed it and was wondering how many of you just need…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Adapted dimensions
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Simple clamp, adjust the height to the desired height of your chair and clamp around the base. Any number of bolts should fit through the holes, by default the holes are just over 8mm across. Made this in PETG to fix the wife's chair. I…
Print approx. €6.57–€8.03 excl. taxPreliminary estimate for PETGSource material: PET
I lost the screw for my sink, and was unable to find a replacement part. Therefore modelled this replacement screw for Hansgrohe Talis s tap sink closer. For more details, see the model number 97522007 in hansgrohe parts list here . For…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix which was made to include the ribbon cable for the Pi's camera while leaving the raspberry pi zero (2)'s heatsink facing outwards . To accomodate the flipped pi you will need to disassemble the back of the einsy cage and…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Ein Sieb für ein 16cm breites Zusatzspülbecken. Strainer for a 16cm wide sink. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0,20 Quality Infill: 20% Filament: Prusament PLA Category: Kitchen & Dining
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
Note: Before printing this design, have a look at the remix from @heathen614_26810 here: https://www.printables.com/model/653156-deburr-box I think their design is superior to mine, unless you have a preference for a simple, open holder…
Print approx. €5.35–€6.54 excl. taxPreliminary estimate for one variant
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
This 3D-printed sink hole plug is designed to fit snugly into a standard sink hole, with a height of 36mm and a radius of 30mm. It's a practical and durable solution for preventing water drainage issues, offering a simple, reliable fit…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
IMPORTANT: You will either need to add your own threads or undersize the print so the hole of the nut is smaller than the threads. That way it can self tap when screwed on. --------- If you need a nut for any type of pipe this will work…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
The flimsy sleeve that protects the siphon trap cut out of our Schildmeyer Trient Basin Cabinet (sold by ALDI Germany as Ambio Waschbeckenunterschrank) became loose over time. This exposed the edges of particle board which are prone to…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
This model fixed my sinking office chair for good. Simply remove the clip on the very bottom of the chair holding the piston in place. The shaft/piston is easily removed from the chair legs/base. Slide the printed part on the shaft. Put…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Box for Wolfcraft countersinks that protects them and acts as a display stand. Also very satisfying fidget toy. Print-in-Place verison The lid is kept shut indirectly by magnets. Countersinks can be displayed at 90° and 45° for easy…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
The plug of my IKEA Bathroom Sink stopped the drain a bit too well. It kegt closing even if not intended. So I designed this littke stand for it. Der Stöpsel in meinem IKEA Waschbecken schloss den Abfluss immer wieder von alleine, also…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Box for Wolfcraft countersinks that protects them and acts as a display stand. Also very satisfying fidget toy. The lid is kept shut indirectly by magnets. Countersinks can be displayed at 90° and 45° for easy access. Printed in 3 pieces,…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
A "HOT" band to warn users that an Insinkerator Invite HOT150 hot water dispenser produces very hot water. This band slips over the spout of an Insinkerator hot water dispenser . The band is intended to be red with white lettering via two…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Het is altijd moeilijk op uw rug onder de lavabo of wastafel te liggen om die moeilijk te bereiken moer los te maken. Daarom heb ik deze pijpsleutels zelf afgedrukt, in de maten m13, m12, m11, m10, m9, m8. Ook een verlengstuk dat je kan…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Wenn die Regenrinne außermittig ist und nicht in das originale Loch passt.
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
Nothing special, another barbed drain cleaner i designed one day i needed one and didn't want to use one from the internet Should be able to be scaled in slicer in case you need it longer, thicker/thinner or wider I recommend printing it…
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
Fits 70mm drains, allows for good flow even when partially blocked. Should be printed with heat resistant filaments if its going to be exposed to boiling water, I found that PETG and ASA will warp, while PC is able to resist warping with…
This drain snake was created to have extra long barbs to help grab all that stubborn hair that can get caught in the drain. PLEASE NOTE: you need to have a drain opening that is greater than 4x12mm in order for this snake to fit in your…
This is a collection of remixes or add-ons for the awesome “Kitchen Sink Organizer” from @Ruiaxe. Our sink is a bit bigger so it couldn't fit the organizer. Decided to remix the original model and created a few additions that might come…
A collection of kitchen and bathroom drain strainers, stoppers, and drain pads. Useful for kitchen sinks, bathroom sinks, utility sinks, bathtubs, and probably more! Before printing, please review the list of models and their respective…
This is a kitchen sink filter to keep gross stuff and food bits out of your canalisations. It is made with a 54mm radius but can be adapted with a change in scale. Print instructions You should print it in ABS for water resistance. Black…
This is a Sink Organizer for the kitchen. The goal was to make a robust model, with a open bottom to allow for water to flow. The Hexagon shape for the holes was a easy design choice :) Updated 13/01/2023: Added a side top area. Updated…
Unsinkable Boat: A cool little Boat which can't sink. It has air chambers to stay always above water. It prints nicely in Spiral Vase Mode with 0,65-0,75mm Wall. I upload 5 different Sizes. The Boats are stack-able then. Nice little Toys…
This floating boat model is optimized for efficient 3D printing, balancing structural durability with lightweight design. The project consists of a single sliced file engineered to print in approximately 3 hours and 28 minutes. Designed…
This sponge holder can hold up to three typical sized dish sponge in a vertical orientation. The sponge holder measures 90mm wide and 130mm deep. Each sponge slot can accommodate 30mm thick sponge. It is intended for use with an…
A versatile sink drain strainer designed for sinks with an Ø82, Ø86, or now Ø90mm diameter, featuring an integrated plug. The press-fit design accommodates a drain plug stem that fits most modern drains (Ø8mm) and includes a gasket for a…
Kitchen sink organiser with built-in drip tray/runoff, so water runs back into the sink so never needs to be emptied and brushes and clothes dry out. The base is universal and fits any of the tops, so you can mix and match colours or…
Should fit into a drain of around 50mm in diameter. The print is split into 2 parts in order to print cleanly without supports. I experimented with snap fit design, it takes some fiddling to put the two pieces together but it works better…
This version doesn't require any support to print and is a more snug fit than the previous . It also allows for a better waterflow while preventing smaller objects to fall into the drain hole. If you’d like to support my work, leaving a ♡…
No supports. Printed with PLA, you can use PETG as well. You can adjust legs height in your Prusa slicer. I have two leg heights 10 and 12 mm to create a small slope to let water through. Donations here: https://ko-fi.com/svabdan…
After my first and second toolholder collection, here is the third one. This one contains storage for drills, taps, dies, and countersink bits . All trays have a height of 3 units and are not stackable . (You may put them on top, but not…
UPDATED 11th March 2020: Added straight-through Y pattern, optional flow arrows. Having a european-built caravan in Australia, I found it very difficult to get the 28mm diameter sink and drain pipe plumbing these are fitted with. I tried…
Simple replacement for a sink filter. Use it at the kitchen or bathroom. Standard 43 mm diameter. Print instructions Category: Replacement Parts Summary Simple replacement for a sink filter. Use it at the kitchen or bathroom. Standard 43…
A flexible Sink Caddy for your indoor or outdoor sink. Dimensions (with lower cup): L:180mm; W:92mm; H:135mm Features Store your soap; sponges and brushes in a flexible configuration. Divider allows for 1/2 split or 1/3-2/3 split. More if…
Sink drain strainer that fits a typical bathroom sink
Just 20min print, fits 180mm bed size. PLA workes perfectly.
Scrub daddy sink caddy! BOM: Suction Cups The suction cup holes measure 14mm (outermost diameter) to 10 mm (inter diameter). See the example suction cup measurement image included. NOTE: Before printing, check to see if your sponge will…
A full kitchen furniture set can be purchased on Etsy: https://etsy.me/3RIjFII Print recommendations: body.stl - print on its back pipe.stl - print white siphon.stl - print white on its top tap_nut.stl - print twice(!) door_left.stl &…
Found this model from Mewalela on Thingiverse while searching for dollhouse furniture for my daughter's Barbie. I've scaled it up to 130 %, which fits better in my opinion. The files here are the original ones. The orientation of the tap…
Keep your kitchen sink neat and organized with this sponge and cloth holder . Designed to improve drying and hygiene, it keeps cleaning items elevated, allowing better airflow and faster drying. Ideal for use next to the sink, this holder…
It's amazing how hard it is to find a good sink strainer. I was looking for something that fits in the drain hole (rather than overlaping the top), that had a fairly fine mesh to keep things like corn silk from washing through, and that…
This is a hotend mount for the TZ v2 hotend for Voron Stealth Burner. Based on the Bambu style hotend. Care was taken to ensure good airflow for the heatsink and to direct the exhaust air upward to avoid spillover that can lead to ABS…
Turn your faucet into a water fountain by just putting this under to change the water flow. See more at: Instagram: @3DBrooklyn Facebook: 3DBrooklyn Category: Bathroom
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
Modular tray to let dish appliances and cutlery drip of. Designed to sit on the edge of the sink so the water can drip back into the sink. Currently the parts are designed that you need exactly one of each. Height of overhang: 4,6 mm…
🇫🇮 Tervetuloa Helsinkiin! Welcome to Finland! This model was designed by Dany Sánchez with optimizations by Jukka Seppänen @kijaidesign . The idea of MiniWorld3D came to creator Dany Sánchez after a Finnish friend who asked if 3D printing…
Bottom of the basket was elevated with feet to prevent water accumulation. Enable support (on build plate only) when printing.
The diameter is 45/43 mm. In case it doesn't fit your sink you can scale x and y in the slicer to make it fit. My Cura settings for Eryone TPU 95A on my bowden style Ender 3 clone Geeetech A10 (Dual Gear Extruder): Nozzle: 210 °C Bed: 40…
The top/bottom layers are only 0.4mm thick, but the rigidity is not compromised thanks to the ribs. The whole thing can be assembled with four M2.5x8 screws. This model is designed to be printed with a 0.8mm wall thickness (0.4mm…
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
UPDATE 02 April 2023 I have added the STEP and f3d files of those who want to edit the design. This is the fan bracket that is slotted over the heatsink of the X1. I designed this as those I saw were restrictive ducts that create back…
NEW VERSION 3.1 with recessed hex nuts and more clearance for CR-Touch (STL and OBJ formats). 5015 fan upgrade mount for Ender Sprite Extruder Pro using stock screws. There are a few similar designs to this, but I took a little bit of the…
A simple clog remover for a sink drain. About 27cm Category: Bathroom
For fastening the honeycomb storage wall grid to the wall. This was a simple change from @roryshko's excellent ‘empty’ countersink model to use an 82 degree fastener instead of 90 degree. Also included are through hole versions, all with…
A sink-edge tray for sponges, soap bars and scrubbers. The ribbed floor drains straight back into the sink, and five parameters let you size it to your own sink. What you get Ribbed floor: the item rests on the rib tips, so water runs off…
Many of my projects mount to the wall. In North America, that means using #8 wood screws. After some experimenting, I have found that this stl creates a void that allows the screw to pass through tightly, while having a countersunk area…
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Before you print! This is a special model, that is ment to be shot at, with an airsoft gun. It has many watertight compartments, so it can take multiple hits (depends on how strong gun you have). Because its ment to be destroyed, I did…
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
A kitchen sponge caddy that will fit over the bridge between 2 kitchen sinks, designed to hold a sponge/cloth on each side, allowing the water to drain away and the sponges to dry out for a safe and healthy kitchen.
This is a drainer for a small bathroom sink. The hole sizes were selected to provide a good balance between filtering and flow. Print in upside down orientation with no material support. The OpenScad source file is also included. I didn't…
Drain trap in three sizes. One for 1.25" drain opening, and scaled up copies for 1.5" and 1.625" in case useful (thicker walls than necessary, but here they are:) Kind of a janky sample print shown in photo, just threw down a quick print…
Remix of Marius' awesome slim case for the PiZero2W, with a cut-out of the heatsink that some are delivered with.
Here is a simple organizer for your kitchen sink.
A sink caddy for storing dish brush, sponges, and wash cloth. The main body of the unit provides ample space for storing a dish brush, while the rail offers convenient hanging and drying space for damp dishcloths. The tray can be easily…
Universal Tool Handle for Countersinks and Other Tools – Ø4 to Ø16 mm A precise and ergonomic tool handle for countersinks and other tools is essential for clean and controlled manual work. Whether countersinking screws, deburring,…
I was tired of having a mess of water coming from sponges around my kitchen sink, so I made this. The sponges can dry without leaving water all over and so can the washing brush. These is a step and an angle underneath so that it fits my…
Introducing the ultimate sink organization solution: the 3D-printable Sink Caddy and Soap Holder! Crafted with convenience and functionality in mind, this innovative design revolutionizes your daily dishwashing routine. The Sink Caddy…
We all have that one co-worker who treats the sink at work like it's their sink at home and lets their dirty dishes sit in or around the sink for their spouse to clean. The only problem with that is if that spouse doesn't work where you…
This drain strainer is a perfect fit for Fiat Ducato Burstner Ixeo Plus 724 campervan sink.
This is a reusable 3D printable mold designed for casting 250g fishing sinkers from concrete. Ideal for anglers looking for an eco-friendly and cost-effective alternative to lead sinkers. The mold is easy to print and use, and it can be…
easy-to-print and very well functioning sieve/strainer for shower/bathtub or kitchen sink. In compariason to the common ones with just holes on a flat base, this one has a much higher cross-section for the water flow and can thererfore…
Sink strainer for VW California T5/T6 This is a remix of the Kitchen sink basket strainer from LoboCNC. I've reconstruct it from scratch to fit to the VW California T5/T6 kitchen. Followed these print instructions: The trick to printing…
Wanted to hand wash some clothes but our bathroom sink did not have any stopper/plug to do so. So into fusion 360 I went to model one. This one has been working great for months. I printed in TPU for a good seal. The dimensions I modeled…
When we moved into our most recent place, there was no insert/screen for the bathroom sink. I could have dropped my whole toothbrush down that sink hole! I tried printing other popular designs on other websites but found that the other…
Install a REVO on your SV08! Please note: You can purchase one ready-made here if you don't have the ability to machine aluminum locally. I earn a small commission if you do:…
There are many different sponge trays out there, but I wanted one where the print orientation allowed for the layer lines to be parallel with the drip direction. Print this model on it's side to get this effect so water runs down the…
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
Working on parts for granddaughters barbie house. Major thanks to Berkenbusch for https://www.thingiverse.com/thing:610131 . However the seat and lid were not strong enough, properly aligned so I fixed that. Also added in Lampe99's…
I made a heat sink mount of the BC-250 it uses this heat sink https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe I used the intel clip bracket and some of the hardware included as well as left over hardware from removing the stock…
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
Elevate Your Kitchen Sink's Functionality with this handy 3D-Printed Holder! Designed to seamlessly fit over the center divider of standard kitchen sink basins, this holder is a must-have for keeping your dishwashing essentials organized…
After installing the new faucet I ended up with extra unused holes in the sink. So I whipped up a compression fit plug and plate to cover the holes. This is made for 10mm thick sinks. usually composite not metal sinks. The compression…
I got 3D scanned by NYCAP3D while at the CDFAM Symposium in New York City, October 2024 and I wanted to make something a bit more functional with my 3D model. NYCAP3D use a mobile scanning setup that has 162 Canon T7i 24.2 megapixel…
Found some interesting ideas around and put them all together to suit my needs. The holder edge is designed so you can heat it up (gently) and conform to your sink edge. There's room for a soap dispenser (70 x 70 mm or 2,75" max unless…
🧩 Gridfinity DDR RAM Stick Holder — 10 Slot, Stackable This is a compact, workshop-grade Gridfinity module designed to store 10 desktop RAM sticks securely and visibly. Perfect for: PC builders Repair shops Hardware flippers Tech…
The original seal for my IKEA Atlant kitchen sink plug broke - it wouldn't stay open any more due to the corners of the little standoffs being rubbed off by years of usage. As there where only a few clunky 3d models available online i…
Printing Tips Printing Technology: FDM Layer Height: 0.2mm Perimeters: 4 Infill: 10% Infill Pattern: Gyroid Recommended Material: PETG, ABS Supports: None Support Type: None Notes: Designed to have zero overhangs. Recommend ABS or other…