P
PrintablesAndreas G
Small Whistle: extremely loud
Small whistle for keychain, backpacks and other daily or safety equipment.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
- Downloads
- 15,523
- Likes
- 2,803
- Rating
- 4.91
Search results: small
11,111 models
P
PrintablesSHR3D.eu
Small tractor - flexi excavator (printed in one piece without supports)
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
- Downloads
- 8,659
- Likes
- 1,547
- Rating
- 4.84
P
Printablesprntmkr
Compact 90° Right-Angle Bit Holder – Ultra-small for tight spaces
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
- Downloads
- 2,891
- Likes
- 859
- Rating
- 5
P
PrintablesEngiGear
Strong Small J-Hook
This J-Hook is a versatile solution for organizing your home, workshop, garage, or entryway . Whether you're hanging a jacket or a power cord, this hook does the job with style and strength. Perfect for: 🧥 Coats, jackets, and hats 🧰 Hand…
- Downloads
- 2,529
- Likes
- 1,289
- Rating
- 4.95
P
PrintablesEmkatech (Mike)
Ruler Stop S – Precision Scale Stop for 0.5×15 mm Ruler | M3–M6 Versions (Small Version)
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 2,413
- Likes
- 953
- Rating
- 5
P
PrintablesJN-Husch
Bird Feeder for small birds
This feeder is developed for small birds, and the staggered design prevents larger birds from landing on it. The bottom section, holding the bird food, is attached via a twist-lock mechanism to the lid, allowing for easy refilling. It…
- Downloads
- 1,689
- Likes
- 298
- Rating
- 4.91
P
Printablestbrock47
Small Toolbox/Organizer
A small remixed version of @SaschaUncia 's Parts and Crafts Organizer Box that fits on smaller print beds like the Prusa Mini+. My son needed a box to keep his components for Arduino tinkering separated/organized and it seemed like an…
Print approx. €4.89–€5.97 excl. taxPreliminary estimate for one variant
- Downloads
- 1,551
- Likes
- 698
- Rating
- 5
P
PrintablesCraftswoman.cz
34 Small Christmas cookie cutters / 34 Vánoční vykrajovátka / Ausstechformen für Weihnachten
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
- Downloads
- 1,528
- Likes
- 194
- Rating
- 5
P
PrintablesoXiVanisher
Small mechanical wound tracker / counter
A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…
- Downloads
- 1,300
- Likes
- 115
- Rating
- 4.91
P
Printableskrisvda
Triple & quadruple gravity broom holder + gear for smaller diameter broom sticks
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
- Downloads
- 1,236
- Likes
- 164
- Rating
- 4.81
P
Printablesmanuelf
Small Arkham Horror LCG Path Markers
This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
- Downloads
- 1,195
- Likes
- 175
- Rating
- 5
P
Printablessbuerger
Set of small funnels, spiral vase mode printable
I was looking for a funnel printable in spiral vase mode, yet among the 200+ models found on prusaprinters there was only one that was spiral vase suitable and unfortunately didn't fit my dimensional needs. So I made some models on my…
- Downloads
- 1,155
- Likes
- 76
- Rating
- 5
P
PrintablesDaniel Ryan
Small RGB Litho Earth Globe Lamp
This model is a lithophane globe model of the Earth. It uses NASA imagery to accurately depict the continents and oceans. I have added some elements to the oceans to make them more interesting since they take up a large portion of the…
- Downloads
- 1,127
- Likes
- 114
- Rating
- 1
P
PrintablesKubanow234
Aquarium shrimp, small fish cave, home, house, shelter
Easy to print, no support cave with window, for shrimps and small fish with window
- Downloads
- 1,098
- Likes
- 171
- Rating
- 5
P
PrintablesEnigma
Wall hook for 3M Command strips (small)
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
- Downloads
- 1,085
- Likes
- 178
- Rating
- 4.71
P
PrintablesSandy Wrestler
Toothpick Replacement for Small Swiss Army Knife
Replacement toothpick for the small Swiss Army Knife. The g-code file is .05mm Ultra-detail for the Prusa Mini + in PLA and takes about 7 min to print. In the Cover Photo, the green one furthest away is the print. The white/yellowish one…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
- Downloads
- 1,044
- Likes
- 306
- Rating
- 5
P
PrintablesVidar
Small Phone Stand. Print in place
This is a small remix of a creditcars size stand. This is only 3 x 6 cm and 3mm thick. It takes only 30-40min to print.
- Downloads
- 870
- Likes
- 92
- Rating
- 4.38
P
Printablessteven.e.collins
Hextraction Board for Small Build Plates (148x153)
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
- Downloads
- 831
- Likes
- 68
- Rating
- 5
P
PrintablesDino
Small-Parts organizer box (Electronics, screws etc.)
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
- Downloads
- 761
- Likes
- 106
- Rating
- 5
P
PrintablesRobC
Small Bin for Ryobi Link
I created this Ryobi Link compatible small bin using the Cleat created by SemaphoreSlim. I plan to create additional variations with dividers and lids. Printed at .03mm. Update: I updated the model to add the feet as well as make some…
- Downloads
- 742
- Likes
- 123
- Rating
- 0
P
Printablesnem
Small compact sliding desiccant box
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
- Downloads
- 714
- Likes
- 213
- Rating
- 5
P
PrintablesJB
Small Temptowers+wait for Tempchange with retraction
Like me, if you dont have time, or just not enough filament, just use the smaller Temptowers. Based on the "All in One Temperature & Bridging Tower - PLA & PETG GCode included" from Tronnic, and the remix “Prusa Mini Temptower for PLA,…
- Downloads
- 612
- Likes
- 33
- Rating
- 4.91
P
PrintablesDadudos
Angled stand for SMALL drawing tablet One by Wacom
This tablet stand was designed to improve the ergonomics of the Wacom One. (for me it works) Has a place to put the stylus. 3mf file included. Only things different than stock .3mm profile is 1 less top layer and 10% infill with a three…
- Downloads
- 526
- Likes
- 78
- Rating
- 5
P
PrintablesAlexandru Hauzman
Modular Organizer Box with Drawer - Small components
This is summary for the other models of Box with drawers in one place where it will be more easy to update the files, for the moment I will not delete the single models. Existing separate models (soon will be deleted)…
- Downloads
- 510
- Likes
- 103
- Rating
- 5
P
PrintablesGeekMomProjects
Small Translucent Light Bulb
This print was designed just for fun, and to see how a 3D printed lightbulb would look. Turns out it looks pretty much like a regular light bulb! For best effect, print in two colors, solid (ideally gray or silver) for the first 10mm, and…
- Downloads
- 505
- Likes
- 46
- Rating
- 5
P
PrintablesTmpx64
Small House - torture test
If you’re tired of the eternal Benchy and want something different to display on your shelf, here’s a fresh alternative. It’s also a great way to test your printer’s capabilities, including overhangs, bridges, gaps, and stringing. If…
- Downloads
- 476
- Likes
- 95
- Rating
- 5
P
PrintablesLCruz3D
Smaller Toggle Switch Cover - Diameter 6
All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 453
- Likes
- 163
- Rating
- 4.6
P
PrintablesPat_S
Small pillbox with bayonet lock / Kleine Pillendose mit Bajonettverschluss
Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant
- Downloads
- 365
- Likes
- 24
- Rating
- 5
P
PrintablesClamikra
Bobbin Holder, small and useful
This holder attaches a bobbin to the corresponding thread spool so you can store them together in place. I designed it in Shar3D. It took some testing but V5 finally works as intended. Sturdy but elastic. I printed it in PETG but…
- Downloads
- 340
- Likes
- 99
- Rating
- 4.75
P
Printablesmicahbowerbank
Small Dessicant Box
I needed a dessicant box to fit inside my DIY drybox
- Downloads
- 334
- Likes
- 25
- Rating
- 4
P
Printablesneale
Small Parametric Temperature Tower
A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…
- Downloads
- 287
- Likes
- 18
- Rating
- 5
P
PrintablesValleyGeek
Agricola All Creatures Big and Small Animal Tokens
This is a complete set of additional, or replacement, animal tokens for Agricola All Creatures Big and Small the Big Box . The tokens and markers are modeled after the original game pieces to be the same size for compatibility. We…
- Downloads
- 240
- Likes
- 32
- Rating
- 5
P
PrintablesMLS
Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
- Downloads
- 235
- Likes
- 45
- Rating
- 5
P
Printablesdiedder
Small double ended hook / Kleiderhaken
Designed for an 8mm rod to hang up clothes. Just the evening before we startet our summer camping trip we needed some hooks so organize our clothes in the camper. in the shower was a rod which was perfect to hang up some clothes, so I…
- Downloads
- 226
- Likes
- 18
- Rating
- 0
P
Printablesfluetke
Small Cable Organizer for Power Supplies with Euro-Plug
Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
- Downloads
- 214
- Likes
- 44
- Rating
- 4.25
P
PrintablesValleyGeek
Agricola All Creatures Big and Small Game Piece Trays and Box Orgnaizer
This set stores, organizes, and speeds up setup for all the game pieces from Agricola All Creature Big and Small the Big Box . When everything is stowed in the box you can rotate the box in any direction, even upside down, and everything…
- Downloads
- 200
- Likes
- 23
- Rating
- 4.5
P
Printablesaceofspace
Drawer Organizer for small parts
My version of a small parts drawer. The top and bottom have a bevel to make stacking easier. At least for the tool boxes I use, stacking two trays and a lid fit in most drawers. The lid is optional depending on usage. Updated to add more…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 191
- Likes
- 22
- Rating
- 5
P
Printableskennyd1gital
Small Cat Food Can Lid
A scaled-down version of Piney29887's Cat Food Can Cover for the smaller 3oz cans of cat food. Keep that food fresh between meals! Add your cat's name to the lid with the new text tool in PrusaSlicer 2.6!
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 191
- Likes
- 21
- Rating
- 5
P
PrintablesBerkley
Ratcheting Belt Hanger Small
Looking to hang up my slide belts, the print here was too big for my Prusa Mini so I chopped 50mm of each side and rotated it 45 degrees to make it fit. Printed excellent and works great.
- Downloads
- 180
- Likes
- 23
- Rating
- 5
P
PrintablesTijmen
Prusa MK3 - Smaller SideBoxes for some Tools - fits under bed in the back
This is an edited version of this Sidebox ( https://www.prusaprinters.org/prints/974-prusa-mk3-sideboxes-for-some-tools ). I needed a place to place some electronics, like a stepdown converter, on my MK3s. The original box was a bit long,…
- Downloads
- 170
- Likes
- 16
- Rating
- 4.71
P
PrintablesVolodymyr Stepanets
Small narrow cup for Elfa pegboard
10cm small tool cup for Elfa pegboard. You need (!) to print one pair of Elfa module clips
- Downloads
- 170
- Likes
- 33
- Rating
- 0
P
PrintablesMadtom
kleine Schmetterlinge für Fliegengittertüre (small butterflies for a screen door)
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 8 Magnete 6mm x 1mm (2 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
- Downloads
- 165
- Likes
- 6
- Rating
- 5
P
PrintablesRobertusMaximus
Analog Synth Stand Large, Medium, and Small
Sometimes when you're making music or killing mutant aliens far off in the Science Fiction future, you just need a steady tilted surface to work with your equipment on! Behold the Analog Synth Stand! Three models: Large (used on Behringer…
- Downloads
- 160
- Likes
- 12
- Rating
- 0
P
PrintablesSheac12
Small snap connect case for Adafruit 0.96" 128x64 OLED Graphic Display
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 159
- Likes
- 6
- Rating
- 0
P
PrintablesDanAndersen
Partsdrawer Replacement for Allit Basic 33 (Aldi Workzone, Lidle Parkside) small parts drawer (Kleinteilemagazin)
If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…
- Downloads
- 158
- Likes
- 19
- Rating
- 0
P
PrintablesSPACAK
Floverpot_or_small_bowl
decoration Print instructions print without supports
- Downloads
- 150
- Likes
- 12
- Rating
- 5
P
Printablesbenedikt314159
Bin filler and dispenser for smaller parts, especially for WAGO clamps
Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…
- Downloads
- 147
- Likes
- 128
- Rating
- 0
P
PrintablesHeikit
Modern tealight holder small and large - Moderner Teelicht Halter klein und gross
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
- Downloads
- 142
- Likes
- 22
- Rating
- 5
P
Printablesgskollnau
Stackable project box or small items box
Stackable project box or small items box with lid and 4 different compartments. An edge running all the way around the bottom snaps easily into the box underneath. There is one box without subdivision, one with longitudinal division, one…
Print approx. €7.52–€9.19 excl. taxPreliminary estimate for one variant
- Downloads
- 141
- Likes
- 31
- Rating
- 5
P
Printablestom
Abklappbare Ablage (Regal)/ Small fold-down shelf
Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 138
- Likes
- 14
- Rating
- 3
P
PrintablesMtechnic
Small Funnel for 50ml Spray Bottle
Clean your print bed often with IPA and need a helpful way to fill a 50ml spray bottle? This funnel is what you're looking for as it will fit that bottle opening perfectly. .m3f and .STL files included if you wish to scale to a different…
- Downloads
- 132
- Likes
- 3
- Rating
- 0
P
PrintablesNoWayCall
Small Microphone Pop Filter / Screen / Shield | (Shure SM58 style Mic.)
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
- Downloads
- 130
- Likes
- 25
- Rating
- 0
P
PrintablesDiana Šinková
Christmas card with small gift - mistletoe (single extruder print)
Christmas card with small gift - mistletoe (single extruder print) Mistletoe and card are multicolor by lines - switch of two colors in single extruder.
- Downloads
- 126
- Likes
- 25
- Rating
- 5
P
Printablesgloda
Lid: Powerfix / Allit small parts organizer
Upgrade your small parts magazine! The Powerfix / Parkside Kleinteilemagazin 17 & 33 (sold by Lidl, FR: rangement pour matériel de bricolage) and Allit VarioPlus Hobby 17 & 33 (sold by Hornbach) come without lids. Take them anywhere! This…
- Downloads
- 125
- Likes
- 33
- Rating
- 5
P
PrintablesFireffox
20 Knob Small Jewelery / Necklaces Hanger for IKEA Wardrobe
Small jewelery hanger for rings and chains. 25mm tall and 33.2cm when printed and installed in pairs to fit the inside door of IKEA closet. Fixed to closet door with double-sided tape File is cut in half with a puzzle inspired dovetail…
- Downloads
- 120
- Likes
- 14
- Rating
- 5
P
PrintablesJiří Šilhavík
Modular small parts drawers
EN: This is just another one of the many binders. However, this one is modular (one modul is 50x40x142 mm) and the printed parts do not need supports. Width = multiple of 50mm Height = multiple of 40 mm Depth = constant of 142 mm CZ: Toto…
- Downloads
- 116
- Likes
- 32
- Rating
- 5
P
PrintablesDžonSnou
Smaller pins for IKEA UPPDATERA
Smaller pins for IKEA UPPDATERA. Printed with PLA,PETG, ABS, ASA, ASA275 at 0.2mm and 3 perimeters layer height, 20% infill with supports. execution on video:…
- Downloads
- 114
- Likes
- 16
- Rating
- 0
P
PrintablesJames Evans the mnmlMaker
Small Desk Nameplate
I wanted to test the text function in OpenSCAD. This is a small nameplate that I made for my daughter's school desk. My work is all free forever. If you want to support my habit you can keep me caffeinated.…
- Downloads
- 107
- Likes
- 8
- Rating
- 0
P
PrintablesFranziska
Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
- Downloads
- 107
- Likes
- 16
- Rating
- 5
P
Printablessdaendi
Soldering assistance for small PCBs
The goal for this model was to find a solution for soldering small PCBs. I always had difficulties with holding the soldering iron stable and this is relatively important with small PCBs. That's why I wanted to design a soldering help to…
- Downloads
- 104
- Likes
- 53
- Rating
- 0
P
PrintablesShadow Moose Industries (Amos)
Small Mecanum Wheel - 3/8 inch Hex bore for FRC
Ultra lightweight and some of the smallest mechanums available. Print in PETG.Ream all the roller shaft holes with an 1/8inch drill bit and hand drill. Ream the two screw holes with a 3mm bit. Ream all the roller holes with a 3.5mm bit.…
- Downloads
- 96
- Likes
- 15
- Rating
- 0
P
PrintablesRichard Schalander
small tools holder x-acto blades scalpel dentis tools
Small tools holder A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades. Print it “standing” with 10% gyroid/grid infill and grid support from build plate only. The tool holder module…
- Downloads
- 94
- Likes
- 6
- Rating
- 0
P
PrintablesH3dSprint
Small nozzle for vacuum cleaner (pipe: ⌀35,5 / nozzle: 10,4mm x 33,4mm)
The nozzle is suitable for vaccum cleaners with ⌀35,5mm (measured on inlet of the vacuum cleaner pipe) and is printed with PETG. Print instruction: Orientation: print upright Due to the height of 208mm, I recommend to add a support on the…
- Downloads
- 94
- Likes
- 20
- Rating
- 5
P
PrintablesPaultier02
Small Jewelry Box
A compact, 3D-printable jewelry box designed to hold up to 18 items across two organized "floors." The upper and lower compartments provide separate storage for rings, earrings, or small accessories, keeping everything neatly arranged and…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
- Downloads
- 93
- Likes
- 17
- Rating
- 5
P
PrintablesJackson
Drinker for small animals
Ideal for animals like quail or chicken. Dimensions: -drinking bowl: diameter: 165mm; hight: 36mm -waterbottle: diameter: 50mm; hight: 180mm Print instructions Printed with Prusament PETG clear on Prusa MK3s Nozzle temperature: 260°C Bed…
- Downloads
- 92
- Likes
- 13
- Rating
- 0
P
PrintablesBlue Hazel
Small Furniture Handle
Small furniture handle with print pause to insert M3 hex nut for fixation.
- Downloads
- 86
- Likes
- 20
- Rating
- 5
P
Printableseof
Nestable Organizer Trays for small Parts / Verschachtelbare Ablagen für kleine Dinge
Trays to deposit small parts (screws, pearls, etc)
- Downloads
- 81
- Likes
- 7
- Rating
- 0
P
PrintablesSpacekoaster
Wiha small screwdriver holder
Hello, Here's a remix from the Wiha small screwdriver holder from Colorfabb on Thingiverse (https://www.thingiverse.com/thing:1487220). The holder is made to hold 6 PicoFinish HEX screwdrivers from Wiha. The original design had two holes…
- Downloads
- 80
- Likes
- 13
- Rating
- 0
P
PrintablesCampo_da_Gator
Medicine Cabinet Organizer - Small vertical file holder.
I had some stuff in my medicine cabinet that kept falling over and dumping over the counter. 3D printer to the rescue.
- Downloads
- 79
- Likes
- 15
- Rating
- 0
P
PrintablesFantasy3DPrintsShop
Bambu Poop Chute - Smaller Footprint
This remix is from a request to be able to print the Poop chute on a Prusa MK3 printer.
- Downloads
- 74
- Likes
- 1
- Rating
- 0
P
Printables3DCatt
halloween pumpkin earrings thinner and smaller
the g-code has the proper height of layer for the manual color change
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
- Downloads
- 72
- Likes
- 14
- Rating
- 5
P
PrintablesThesBer
Android Big movable Eye – Now small Keychain :-)
Meet the Android 🤖" Big movable Eye "👁, the bot with a seriously movable eye. This isn't your standard, friendly green robot. This is a dual-sided companion that’s always got an eye (one very large eye) on the prize. Realistic eye look:…
- Downloads
- 66
- Likes
- 18
- Rating
- 0
P
PrintablesDevise3D
Small Paper Clip
This paper clip is a reliable tool for keeping your documents, notes, or files organized. Lightweight and easy to use, it securely holds multiple sheets of paper together for everyday tasks. Beyond traditional uses, it can also serve as a…
- Downloads
- 65
- Likes
- 7
- Rating
- 5
P
PrintablesMichal Pešek
Aeropress filter small case
Print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2mm Perimeters: 3 Supports/brim: NO Two colors: change filament after first and fourth layer, or use MMU (AMS). Note: STL files are oriented to print
- Downloads
- 62
- Likes
- 19
- Rating
- 5
P
PrintablesBurt0n
Cup with Lid for Small Items VW Polo
Cup with Lid for Small Items – fits VW Polo AW (from 2017) The VW Polo doesn't offer much storage space, so I designed this simple insert for the cup holders. It's perfect for keeping coins, small change, keys, or other small items…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 62
- Likes
- 5
- Rating
- 5
P
PrintablesPhDGoSlowAncient
Fidgit - Magnetic 34 x 60 Smaller Hex
This fidget is smaller than my similar larger fidget. This one fits more easily in your pocket. Carry several in your pocket and pass them to friends or anyone you meet. It compresses with your finger or thumb and returns to the extended…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
- Downloads
- 56
- Likes
- 3
- Rating
- 0
P
Printables3DM-DeMeern
Small bowl Ø95x51mm
This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
Printablesgrejvl
Cold Shoe to SmallRig 1/4" Adapter
This is a cold shoe to SmallRig 1/4" adapter , designed to let you securely attach any cold shoe accessory (like microphones, lights, or monitors) to your SmallRig rig or other equipment with a 1/4” screw mount. The design is compact,…
- Downloads
- 51
- Likes
- 4
- Rating
- 0
P
PrintablesAxol
Lil gnome model (a little small upscale if wanted)
little gnome with hat, pants, nose, beard and eyes
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
- Downloads
- 50
- Likes
- 8
- Rating
- 0
P
Printablesgillis
Screw-together container for small items
Print with default settings layerheight 0.2 15% infill Inner height of the container is 25 mm and the diameter is 80 mm For a single/top container you should print a lid For the following container(s) you should print a connector All…
- Downloads
- 49
- Likes
- 15
- Rating
- 0
P
Printablesboomke
eibos cyclopes small spool adapter
i didnt like that Gerfunky used other bearing and rods for holding the spools on so i adapted his model so u can use the bearings that come with the eibos cyclopes and also the rods.
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
Printablesbaschtler
Small Machinist Square
Since i needed 16 Pieces of a machinist Square for a school Woodworking Project it was way cheaper to print them. Size inner angle: 40mm x 60mm / 1.5748in x 2.3622in Printed on a Core One in PLA+ (from RBD) My Settings: 0.20mm STRUCTURAL,…
- Downloads
- 42
- Likes
- 1
- Rating
- 0
P
PrintablesFJ
Drying Rack (Wäscheständer) Fix (Small)
This model is a remix of https://www.printables.com/model/250269-drying-rack-wire-repair It is a bit shorter and thinne
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 42
- Likes
- 5
- Rating
- 2
P
PrintablesChristopher
Small Bushing for Piscifun Line Spooler
Lost one of the Small Bushings, so made a replacement. Printed with ColorFabb HT, Auto Organic Supports.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 41
- Likes
- 11
- Rating
- 0
P
PrintablesMatej Vajnar
Fiat 500e key enclosure smaller version
Remixed version of Fiat 500e key enclosure by Helmut Steinberger
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
- Downloads
- 40
- Likes
- 2
- Rating
- 0
P
PrintablesSlablaadje
Sclip; small, simple and snug filament clip
Why? Yet another filament clip…..why? Because the existing ones didn't entirely suit my need. They would come loose or would just not hold my filament tight enough. Or they did not fit when the spools were full. Maybe it's just my spools…
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
PrintablesGeorge75
Stackable sorter (Storage of sewing and other small things.)
The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.
- Downloads
- 38
- Likes
- 17
- Rating
- 0
P
PrintablesPeopleware
Anpassbarer LACK Enclosure Spulenhalter für große und kleine Spulen / Spool holder for large and small spools
English see below Wer sich das Prusa LACK Enclosure V2 gebaut hat und eine MMU2 besitzt, hat vermutlich die Spulenhalter für 5 Filament Spulen gedruckt auf den LACK Deckel gebaut. Nachteil dieses Spulenhalters: Die großen Filamentspulen…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 35
- Likes
- 5
- Rating
- 0
P
PrintablesDirexyl
Really Small Banana
It's a really small flat banana. It does the impossible. It's fast, cheap, and good.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
- Downloads
- 34
- Likes
- 5
- Rating
- 5
P
PrintablesExtra Fox
Paint Brush Rack - Small
This rack provides vertical storage of hobby paint brushes on one side, and on the other, a place to allow brushes to dry with the brush facing down. One word of caution. 3D prints aren't necessarily great at retaining liquids and…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 32
- Likes
- 11
- Rating
- 0
P
PrintablesMuad´Dib
Jmenovka na kufr - malá (Suitcase name tag - small)
Model je polotovar jmenovku na kufr. The model is a blank name tag for the suitcase.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesSanTheMan
Small mini bowl for scraps
A small sized bowl with 2cm height and 6.836 cm in width 4.99 grams of filament on a Prusa mk4 print time is 34 minutes. settings don't matter. I printed in transparent PLA filament. it is sturdy and will not break. If you are using a…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesToník
Small paper clip with window
This is a paper clip with a rectangular hole for displaying the selection. I recommend printing the entire clip from PETG so that the clip is flexible enough, but you can also use other filaments. Size of the entire model: 17x10x1 mm (can…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 30
- Likes
- 14
- Rating
- 0
P
PrintablesEvelin
Small shelf for a headboard
A small shelf I designed to be stuck behind the headboard. It's meant to hold a TV-remote or other small accessories It's 120mmx260mmx120mm I made it to make the most of the vertical build volume of my Core One. It needs supports for the…
- Downloads
- 30
- Likes
- 12
- Rating
- 0
P
Printableszoltanf
Small-end Attachment Holder for ORFELD Vacuum Cleaner
This helps keep the small sized end attachment on the pipe so you can carry it around together with the vacuum cleaner. Designed for ORFELD cordless vacuum and the small attachment that comes with the device. Easy to print, no supports…
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
PrintablesVisualReversal
Josef Prusa Googly Eyes Extruder Visualizer (Smaller Nose Remix)
Because I've only ever used PrusaSlicer I was unaware the negative spaces came out as solid spaces on other slicers. So, this version has no negative space cone on the glasses. Instead, I made the nose cone on the base slightly smaller to…
- Downloads
- 29
- Likes
- 7
- Rating
- 0
P
PrintablesBruce
Small 3cm Hook
A small 3 cm hook for screwing into a walk and hanging things off.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
- Downloads
- 28
- Likes
- 8
- Rating
- 0