Search results: sor

Sort order

Counting matching models…

P
Printablesschuetzi99

Glasses holder for car sun visor

This holder is clamped onto the sun visor of the car, or onto your shower cabin door. It reliably holds a pair of glasses without interfering. So the sunglasses are easily at hand when you need them. Easy to print with standard…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
20,771
Likes
5,168
Rating
4.85

Spool holder and drybox for Enclosure V2 - with humidity sensor

This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant

Downloads
18,696
Likes
4,874
Rating
4.74

Drybox for Prusa Printer Enclosure V2 - without humidity sensor

This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10,924
Likes
983
Rating
4.64
P
Printablesfifindr

Car Visor Sunglasses Clip

Use 4 walls + PETG. A simple clip designed for holding sunglasses or prescription glasses on a car sun visor. The clip attaches to the visor and keeps glasses easily accessible while driving, helping reduce clutter and prevent glasses…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,613
Likes
1,391
Rating
4.89

Standalone Drybox, spool holder - with humidity sensor

Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant

Downloads
5,131
Likes
693
Rating
4.73
P
PrintablesSneaks

Quickly Measure & Sort M2, M3, M4, & M5 Metric Screws up to 50mm Long

Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…

Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant

Downloads
4,402
Likes
913
Rating
4.96
P
Printablesarcanelayers

Sunglasses Car Visor Clip

Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,703
Likes
650
Rating
4.7
P
PrintablesAlex Ward

Prusa MK3S/MK3s+ Reverse Bowden filament Sensor Cover

Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
3,074
Likes
411
Rating
4.96
P
PrintablesBen

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
3,038
Likes
1,164
Rating
4.5
P
Printablesarcanelayers

Sunglasses Car Visor Clip V2

Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…

Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,880
Likes
228
Rating
4.67
P
PrintablesLW design

Ender 3 S1/pro filament sensor bracket

Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
2,879
Likes
417
Rating
4.91
P
PrintablesAngus B. Clark

(3MF) Poseable Articulated Robot Hand (sorted/scaled)

Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
1,705
Likes
543
Rating
4.8
P
PrintablesKDG3

Visor Sharpie/Pen Clip

Quick and easy Visor Sharpie/Pen universal clip. Great for field workers who need to scribble quick notes occasionally, and can't get caught without a pen! Printed in Prusament PETG.

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,690
Likes
568
Rating
5
P
PrintablesAdRilUtiOn

Different Dyson V15 accessories holders

With these holders, you can neatly store your Dyson accessories. Update: Added STL Files

Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,613
Likes
211
Rating
5
P
PrintablesDrewgolas

Cyclops Visor

This is an updated version of my older visor. Sleeker, and more akin to the 90s television show

Print approx. €26.59–€32.50 excl. taxPreliminary estimate for one variant

Downloads
1,553
Likes
209
Rating
4.75
P
PrintablesMartin

Atlantis Accessories 4 - Aurora

This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant

Downloads
1,442
Likes
315
Rating
5
P
PrintablesAkum.cl

articulated surprise gift box - caja regalo sorpresa articulada

Articulated surprise gift box: Educational, its articulated base will allow you to surprise your friends with a surprise gift. Customizable, its pieces are printed separately, you can use different colors without needing a multi-material…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
1,316
Likes
262
Rating
5
P
PrintablesilMitch

Outdoor Sun/Rain Shield for Aqara Temperature Humidity Zigbee Sensor

Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,255
Likes
223
Rating
4.85
P
Printablessteffenbew

IKEA Skadis Cutter / Scissors Holder

Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
1,191
Likes
174
Rating
5
P
Printablesrbid

Yet Another Portable Photography Paper Backdrop Accesory

Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
1,007
Likes
209
Rating
4.78
P
PrintablesAlessio

Useful ACCESSORIES for Cooler Master QUBE 500

With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…

Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant

Downloads
1,005
Likes
183
Rating
4
P
PrintablesT. Beck

U.S. Coin sorter

U.S. coin sorter. Roll the ring around clockwise and coins will fall in their respective coin tubes. Tube lengths sized for roll amounts, Penny, Nickel, Dime and Quarter (50 cents, 5 dollars, 2 dollars and 10 dollars). I added a nut to…

Print approx. €8.69–€10.62 excl. taxPreliminary estimate for one variant

Downloads
954
Likes
138
Rating
4.4
P
PrintablesBodo

Stackable Insertbox - feet and variant overview (Sortimo/Bosch/Auer/others)

This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
674
Likes
156
Rating
4.63
P
PrintablesGary

M3 Screw Sort tray

I made my own version of the M3 Screw sort tray. This includes a few extra sizes and an end catch tray to catch large sizes.

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant

Downloads
636
Likes
82
Rating
4.8
P
Printableskentnek

Humidity Sensor Holder for Sunlu S1 Filament Dryer

I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
585
Likes
119
Rating
4.93
P
PrintablesNS

Capacitive Soil Moisture Sensor v1.2 v2.0 Case (box)

Allow me to introduce you Capacitive Soil Moisture Sensor v1.2 and v2.0 Case (box). I required this sensor in one of the previous projects and create case for it, to make it more secure. Hope you will enjoy it. Print instructions:…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
528
Likes
31
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-AFV001-Assorted-german-WWII-tank-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
513
Likes
74
Rating
0

Muteflute/Sordina de flauta dulce

A simple and useful muteflute Printed at 0.4mm nozzle and 0.2mm layer quality with eSun petg The gcode file is for an Ender 3 V2

Print approx. €0.03–€0.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
492
Likes
21
Rating
4.86
P
PrintablesRobertusMaximus

Atmosphere Processor!

Atmosphere Processor! Within the great megalopolises, the air is heavily polluted by thousands of years of industrial waste. A virtual hellscape requiring rebreathers in much of the lower level. The overlords in the upper levels would not…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant

Downloads
464
Likes
84
Rating
0
P
PrintablesAlvomane

Radar Presence Sensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board | Radar Präsenzsensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board

EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
438
Likes
50
Rating
0
P
PrintablesHLFR ENGR

White Board Mount & Accessories

Mounts: These mounts were designed for Mead® White Board 85356 to allow the board to be quickly removed from the wall without tools (post installation). The mounts work by allowing the board to sit on the Bottom Mounts and swiveling the…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
413
Likes
276
Rating
5
P
PrintablesAlvomane

Sun Visor / Sunshade / Sonnenschutz / Sonnenblende compatible to BMW Connected Ride Cradle (CRC)

This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…

Print approx. €7.46–€9.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
392
Likes
22
Rating
5
P
PrintablesPrism08

Unimog RC accessories left side

This goes with my UNIMOG RC Chassis . The tank and the box are… empty ;-) See for yourself when printing (tip: set infill at 0%) … I had some trouble with all the screws that were in the way so the bracket had to be tweaked. Mount…

Print approx. €4.36–€5.33 excl. taxPreliminary estimate for one variant

Downloads
388
Likes
48
Rating
0
P
Printablesluq0

MACRO photography accessories - focusing rail and bellows using 2020 v-slot profile

Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…

Print approx. €5.37–€6.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
151
Rating
5
P
PrintablesStefano Vartolo

Sunlu Filament Dryer humidity sensor holder

I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
375
Likes
78
Rating
4.63
P
PrintablesNewk

Standalone Drybox - without humidity sensor

This is a remix of Ondřej Stříteský's "Standalone Drybox - with humidity sensor". This version only contains the bottom without the hole for the humidity sensor. Get the rest from Ondřej's original. You can place five pieces of this…

Print approx. €16.89–€20.64 excl. taxPreliminary estimate for one variant

Downloads
354
Likes
18
Rating
3.5
P
PrintablesJKM

Wardrobe accessories

For better attachment of the back wall. Nail hole diameter 2.5mm. Variants: 1 - height 2mm 2 - height 2mm + recessed nail = with supports 3 - height 1mm Printing: Layer 0.2mm Bottom layers 5 Top layers 5 Material PETG Supports only for…

Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
350
Likes
13
Rating
0
P
Printablesanimatorgeek

Convoluted Kinematic Coin-Sorting Contraption

Update 11/8/2022: Added STL versions of all the part files (previously I only uploaded 3mf and gcode files). This is a coin sorter that uses the weight and size of the different types of US coins to sort them into four columns – 1, 5, 10,…

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
345
Likes
261
Rating
5

Articulated mount Ikea Tradfri motion sensor (PIR E1525/E1745)

The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
316
Likes
42
Rating
5
P
PrintablesObe_Design

Pokemon Card Sorter / Divider

Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…

Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant

Downloads
314
Likes
101
Rating
5
P
PrintablesTickTock

MMU2S Extruder Filament Sensor Micro Adjuster

Update: This part was recently changed. If your extruder was manufactured after February 2021, you should use the 2021 version. Earlier printers will have to use the other. I found it very difficult to set the very sensitive extruder…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
311
Likes
44
Rating
4.83
P
PrintablesXlucine

Humidity sensor stand

Just a simple holder for those cheap panel mount hygrometers (widely available from ebay/amazon/aliexpress/etc). Print it face down, no supports needed (see .3mf).

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
310
Likes
51
Rating
4.73
P
PrintablesBenKenobi

F-150 Visor Clip Bracket

This is a replacement clip for a Ford F-150 sun visor. My dad's broke so I modeled up a replacement. It broke in the winter, so I printed the version one in PLA as it was cold enough outside that it wouldn't melt. When summer came, I…

Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
308
Likes
29
Rating
0
P
PrintablesFlederlaus

Diffusor-Schlüssel - Wasserhahn Perlator für Gr. 18, 22, 24

Ein Schlüssel, für die Größen 18, 22 und 24, um den Perlator von einem Wasserhahn zu lösen oder wieder anzuziehen. Die üblichen Werkzeuge sind sperrig und nie zur Hand. Leicht verstaubar lässt sich damit schnell ein Sprudlerkopf vom Hahn…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
16
Rating
4.5
P
PrintablesLy

Cat & Accessories - No Supports

Cute cat along with accessories for the dollhouse. No supports.

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
297
Likes
107
Rating
5
P
Printablesasjolund

Arduino DHT11 Case (Temperature and Humidity sensor)

A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…

Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant

Downloads
288
Likes
9
Rating
0
P
PrintablesUpton O'Goode

Temperature Humidity Sensor Mount Top Door Stop for Prusa XL EnXLosure

This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure. You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
288
Likes
52
Rating
4.88
P
PrintablesYTMA

Humidity and Temperature Sensor Adapter / Holder / Mount - for "Printer Frame" Prusa MK4S

Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
280
Likes
106
Rating
5
P
PrintablesJellyTitan

Xiaomi Aqara square Temperature and humidity Sensor Bracket for screw or zip-tie

Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
279
Likes
59
Rating
5

CM3D Extrusor MINI + FS

This extruder use a dual gear drive and you will be able to integrate the FS in the extruder body, similar to the IFS extruder. We have added three variants for PC4-M6, M8 and M10. The filament path is now cleaner than in the VERTEX…

Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
274
Likes
99
Rating
4.6
P
PrintablesMatthew B

Holder for XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC)

This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
271
Likes
23
Rating
5
P
Printableskez

Rear Filament sensor for Prusa XL

I had limited side room but sufficient vertical room for my 5 head Prusa XL, so I wanted to mount the spools above the printer, however the placement of the side filament sensors made this an awkward arrangement. I made the bracket that…

Print approx. €0.58–€0.70 excl. taxPreliminary estimate for one variant

Downloads
266
Likes
98
Rating
5
P
PrintablesTom

Sortiment for Qbrick Systainer One 2.0 - Drawer 3.0 Ultra HD

Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…

Print approx. €19.01–€23.24 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
83
Rating
0

Scissor Block - Office Organizer for Scissors

Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…

Print approx. €17.21–€21.03 excl. taxPreliminary estimate for one variant

Downloads
250
Likes
107
Rating
5
P
PrintablesLeon Kabel

Elegoo Neptune 4 Plus Diffusor

The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
53
Rating
4.8
P
PrintablesFilgy

JSN-SR04T ultrasonic sensor lid mount for IBC water tank

This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
247
Likes
19
Rating
0
P
PrintablesGeorge75

BIG SORTER

I printed from PLA, nozzle: 0,4 and layer 0,2. Print files for PLA , 0.4 nozzle and 0.3mm layer supplied. The only thing that will print from the brim on the backing is the drawer divider with the label. The other parts will be printed…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
247
Likes
95
Rating
5
P
PrintablesNK-Design

1/2 Insertable Bins for AUER PACKAGING Assortment Boxes

The System These containers are designed for the assortment boxes from AuerPackaging. You can find them here: https://www.auer-packaging.com/de/de/Sortimentsboxen.html My Printtime The bins are designed for a 0.4 Nozzle. I recommend…

Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
36
Rating
4.75
P
Printables100prznt

Hue MotionSensor Corner-Mount

A mount that allows the Philips Hue MotionSensor to be installed in a corner.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
232
Likes
30
Rating
5
P
PrintablesSimple3D

SUNLU Filament Dryer Humidity Sensor Holder

I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
230
Likes
54
Rating
5
P
Printablesices

IKEA Tradfri Motion Sensor Corner Mount

🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
214
Likes
24
Rating
5
P
PrintablesAndi

Holders for Dyson V12 Accessories

We bought a DYSON V12 Absolute as new vacuum cleaner. Since there are so many accessories in this set, it is quite complicated to organize them in our small cleaning cabinet. Since space is limited, I wanted to use single holders to have…

Print approx. €9.50–€11.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
211
Likes
33
Rating
5
P
Printables3DJG

Leaf sensory tray

Toy. Sensory tray for kids. Additionally, I have included the .bgcode file with my two-color print setup, with manual color change, as seen in the photos.

Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
45
Rating
5
P
PrintablesYetti

ESP32 Wroom Case with Sensor SHT31

Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
204
Likes
17
Rating
0
P
PrintablesZbyněk Král

Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]

I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…

Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant

Downloads
202
Likes
23
Rating
0
P
PrintablesHLFR ENGR

Phone Holder - Car Visor

This two-piece phone holder securely attaches to your car’s sun visor, providing a convenient hands-free solution for navigation, calls, or media control. Designed for easy assembly, it offers a snug fit while keeping your phone…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
28
Rating
0
P
PrintablesCollinsb

*Fix* Filament Sensor Lever i3MK3S+ Modification Fix

Is your i3MK3S+ printer wanting you to unload filament and reload filament in the middle of print for no reason? What's happening here is that the lever arm inside the extruder isn't fully blocking the light inside the sensor when the…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
198
Likes
20
Rating
5
P
PrintablesMBLX

Lego Bricks Sorting Tray

A very useful lego sorting tray that I simple love!

Print approx. €7.42–€9.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
196
Likes
42
Rating
5
P
Printablesmaxmar

Stands for Braun Razor/Trimmer/Groomer and Accessories (Ablagen für Braun Haarschneider und Zubehör)

Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
27
Rating
4.5
P
Printablesemguepo

Tapa Extrusor CR6SE Extruder Cap - 3mf Files Cura & Prusa

Diseño de la tapa del extrusor de la impresora Creality CR6 SE. Está basado a partir de un archivo encontrado en Onshape, pero este no era igual al original. Se subieron los archivos .3mf adaptados para dos laminadores CR6SE_Tapa…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant

Downloads
192
Likes
7
Rating
0
P
Printables3dprints4life

Knorr Salakrönung / Aldi Kräutermischung - Aufbewahrungsbox für Salatkräuertüten (5 Sorten)

Praktische Box für den Kräuterschrank in der Küche um übersichtlich und platzsparend Salatmischungstüten (Knorr oder andere) aufzubewahren. Das Modell kann stehend ohne Supports gedruckt werden. Die herausstehenden Buchstaben können bei…

Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant

Downloads
190
Likes
26
Rating
0
P
Printableszdzd

3Dlabprint Stearman PT-17 Kaydet – tunning, accesories

I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
188
Likes
23
Rating
5
P
PrintablesZoid

Humidity sensor bracket

Simple bracket for humidity sensor from Aliexpress. I know that this sensor is made for drilled hole, but I don't want to drill hole to my Ikea drybox. The bracket could be easily glued to the box by double-sided tape.…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
28
Rating
5
P
Printables3DJG

Flower sensory tray

Toy. Sensory tray for kids. Choose the model you like best.

Print approx. €5.29–€6.46 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
46
Rating
5
P
PrintablesMouky

Drybox Humidity Sensor Holder

Simple holder for a humidity sensor. You can install the sensor from above. As there are two versions of the sensor I've made two versions of the holder. The small holder is for sensors with 6 holes in the back. The large holder is for…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
182
Likes
38
Rating
5
P
PrintablesBlubber

Xiaomi MI G10 accessory Wall mount

This is a tool holder for Xiaomi G10 accessories. I think it will also fit for older versions but I did not test it. Its a two part design. You have to screw the wall mount to the wall with two screws. Then clip in the utility holder.…

Print approx. €9.67–€11.82 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
25
Rating
5
P
PrintablesVeda88

Sunlu Filament Dryer humidity sensor holder

Changes from the original: - Shorter, the display is now in the curve of the lid - Display fits deeper into the print The screw from the original should still work. Mine fits right over the small tube that came with the box which is a…

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
39
Rating
4.89
P
PrintablesJohnM

Schuberth C5 / S3 loose visor fix

This simple fix stiffens up the visor mechanism on early Schuberth C5s and S3s. However, the mechanism has been redesigned and can be fixed by your importer, so I'd recommend you have that done. If for some reason you can't, this is a lot…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
5
Rating
0
P
Printables100prznt

Humidity Sensor Mount (metric version)

Inspired by the Drybox humidity sensor mount by RobMagus (link is under original model) I created a mount which is better fitting for metric nuts and bolts. The mount holds a cheap LCD temperature / humidity sensor and can be attached to…

Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
169
Likes
45
Rating
4.75
P
PrintablesJeffL

Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
165
Likes
42
Rating
4.8
P
PrintablesCorey Ward

Tineco A10/A11 Hero Latch Replacement (Accessory attachment)

This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
163
Likes
9
Rating
5
P
PrintablesSJB4127

Spool Humidity Sensor Clip

Do you store your spools in vacuum bags for storage between prints, only to find it is super wet when you want to use it? This was the use case which led to this model - a humidity sensor which you can clip onto your spool while storing…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
157
Likes
31
Rating
4.86
P
Printablescomartist

Vinyl Squeegee holder for BOSCH L-Boxx / Sortimo hanging insert LB 238/374

As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. In my work I need different vinyl…

Print approx. €22.04–€26.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
156
Likes
34
Rating
0
P
Printablesfonzy

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
49
Rating
3
P
Printables3DJG

Pumpkin sensory tray

Toy. Sensory tray for kids.

Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
38
Rating
5
P
PrintablesEmkatech (Mike)

Chainmail Cup Coaster – Stylish 3D Printed Table Accessory

Add a touch of medieval flair to your table with this chainmail-inspired cup coaster! The flexible interlocking design protects your surfaces from hot mugs and glasses while looking absolutely unique. Perfect for fantasy fans or anyone…

Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
27
Rating
4
P
Printablesxenon

XL Filament Sensor - reduced force

the force required to insert filaments through the sidemounted filament sensor didnt agree with me so i reduced the spring compression by 1mm. reducing it more will become problematic for the center filament. integrated filament numbers…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
148
Likes
23
Rating
5
P
PrintablesMerrist

Butterfly wand - accessory to a fairy costume

Printed from PLA with 0.6 nozzle and 0.4 layer height. It can be adjusted as needed for a better result. The butterfly is just an outline, for better strength I added reinforcement in the slicer.

Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
27
Rating
5
P
Printables3DJG

Rainbow sensory tray

Toy. Sensory tray for kids. This model is capable of being printed with the rainbow color combination or any other color combination you like. I am including the .3mf file, configured with manual color change. The first and last layers…

Print approx. €6.05–€7.39 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
26
Rating
5
P
Printables3DJG

Butterfly sensory tray

Toy. Sensory tray for kids.

Print approx. €7.22–€8.82 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
31
Rating
5
P
PrintablesRobertusMaximus

Freight Ten Sides "Accessories" - Model Science Fiction

Freight Ten Sides "Accessories." This set of sides for all the Freight Ten models. Keep your stuff from falling out. BullNose Freight Ten: https://www.prusaprinters.org/prints/143750-freight-ten-bullnose-model-science-fiction Single Cab…

Print approx. €8.43–€10.30 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
35
Rating
0
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
137
Likes
6
Rating
0
P
PrintablesOfir Malka

scissors holder

hold IKEA scissors symmetrical

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
20
Rating
5
P
PrintablesRyanR

Remixed Sliced Lemon for LeapFrog Shape Sorter

My daughter was given a LeapFrog shape sorting picnic basket toy, which has little oranges for the circle holes. I wanted more “circle” objects, and happened to have some yellow filament on hand, so I made this lemon! My STL/gcode files…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
8
Rating
5
P
PrintablesAnotherBrain

Filament Sensor Mount for Prusa Mini Enclosure

This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
33
Rating
4.89
P
PrintablesMücke

KWA - M11A1 Customizable Airsoft Mock Suppressor - Free Download

A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…

Print approx. €5.46–€6.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
132
Likes
14
Rating
0
P
Printablestimn

Inductive sensor holder for Diehl Corona MCI

Water meters frequently come with a half metal wheel that enables to use an inductive sensor as an impulse counter to read water usage data. The Diehl Corona MCI is such a device, it has one rotation per L. The inductive sensor must be…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
129
Likes
6
Rating
0
P
PrintablesSchaffer.la

Garage Door opener Visor clip (Chamberlain)

A clip for your visor that fits the Chamberlain (liftmaster) garage door remote. 2 sizes here for thick and thin visors Print in PET-G as PLA will likely soften in the heat inside car. Support is required. Sliced versions for both the…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
25
Rating
5
P
Printableskury

ABAC Air compressor motor fan

Spare part motor fan for air compressor ABAC Air Master Kit CE. Shaft diameter 14 mm. I printed on PRUSA XL with original ENCLOSURE: Filament: AURAPOL ASA 3D Filament Graphite Black 0,4 mm nozzle 0,20 mm layer 5 perimeters 15% infill…

Print approx. €4.80–€5.86 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
12
Rating
0
P
PrintablesAdam Prchlík

Play Slidelock - Activity board accessory

Just add few screws and chain or rope and you have working slidelock. You can have it just like that or mount on some small door / window to train the skill. From expirience, you can change the difficulty by adjusting length of chain. But…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
28
Rating
4.5