Search results: speed

Sort order

2,935 models

P
PrintablesPrint-3D

Speed tower - test your maximum print speed

I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…

Downloads
9,776
Likes
477
Rating
4.76
P
Printablesoriddlero

Ultimate Printer Knob Upgrade - The Best Knob of Both Worlds (Precision/Comfort & Speed)

It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…

Downloads
5,042
Likes
1,492
Rating
4.89
P
PrintablesViren

LEGO F1 Speed Champions Car Wall Mount (Renter Friendly)

This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…

Downloads
4,045
Likes
606
Rating
5
P
PrintablesOurAngryBadger

Ultimate Fan Speed Test

Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and holes. Also…

Downloads
3,086
Likes
287
Rating
5
P
PrintablesMichal Potocký

Speed benchy

Hi, I'm an amateur “bastlíř”. I'm the proud owner of a 3d printer i3 MK3S+ and I want to find out the limits of this printer and how else than 3dbenches. I want to share this experience with you. For each version I always write its pros…

Downloads
2,340
Likes
57
Rating
4.83
P
PrintablesHenry

Metric Speed Square

This is your basic speed square with metric markings on both sides. A speed square is essential for most wood working projects. It is also very useful for a lot of other projects. If your printer is properly calibrated the square will…

Downloads
1,201
Likes
153
Rating
5
P
PrintablesAinon3Dtisk

5-speed training gear shifter

Hello, Today I have a 5-speed training gearshift for you. It is great for practicing manual gearshifting in a car. It prints several parts, there are also files for multi-color printing. For proper functionality, you need to use a Print…

Downloads
1,193
Likes
32
Rating
4.75
P
PrintablesKingpinFelix

Lego Skadis Speed Champions Wheel Mount

This is a remix with the universal hooks for the Ikea Skadis pegboards.

Downloads
1,033
Likes
126
Rating
5
P
PrintablesHenry

Speed square

This a basic speed square giving you a 45 and 90 degree angles. It is relatively accurate for most woodworking applications. It can be customized with the owners name if you like.

Downloads
980
Likes
73
Rating
4.89
P
PrintablesAnton Granata

Rubik's Cube V2 (speed cube) (100% 3D printed)

This newer model has a smoother design to it and is a replicated speed cube. The cube is slightly more difficult than the original design (Rubik's Cube by Anton Granata) to print and build. This design also requires a very small amount of…

Downloads
933
Likes
249
Rating
4
P
Printablesgloda

Speed Bridge (Bridging Test)

This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.

Downloads
899
Likes
51
Rating
4.75
P
PrintablesArea51

Prusa SL1/S Speed Platform Drip Adapter

Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…

Downloads
859
Likes
74
Rating
4.97
P
PrintablesNick14

Prusa mini Handle with speed holes.

My take on a handle for the Prusa mini. Printed from PET or PLA works also. 0.2mm layer heights 4 shells 8 top and bottom layers 30% infill No support needed Requires 2x m6x12mm cap screws and 2x 3030 extrusion T nuts for install. Links…

Downloads
805
Likes
137
Rating
4.97
P
PrintablesTobashadow

Prusa MK3S MK3S+ Speed profile + Best Supports settings Combo

Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…

Downloads
445
Likes
27
Rating
4.5
P
PrintablesFlo

Logitech G PRO X LIGHT SPEED headset hinges (replacement joints)

I have printed them with 100% infill. So far, they have proven to be surprisingly robust.

Downloads
400
Likes
27
Rating
4.67
P
PrintablesDenBéire-BD

6-Speed gear fidget

The other models are really neath, but I wanted a 6 speed gear and something to put it on my keys for my car. So here you go, I remixed the other models in something I can use better.

Downloads
375
Likes
66
Rating
4.78
P
PrintablesHammerTech3D

PLA Temp Tower - Prusa Core One / Core One + | Balanced / Speed / Structural (195°C - 235°C)

PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…

Downloads
337
Likes
14
Rating
5
P
PrintablesSaphyreKry

LEGO Hexagon Ecto-1 / Speed Champions Shelf

I decided I wanted to be able to display my LEGO Ecto-1 in the middle of my Hexagon MiniFig Display that I've been printing thanks to Casadebricks.com's Extended Minifig Hexagons. So I created this shelf specifically for that particular…

Downloads
323
Likes
90
Rating
5
P
Printableswilhems

MK4S 10-Min Benchy — Super High-Speed PrusaSlicer Project (35 Mins to 10 Mins!)

Shave ~25 minutes off a stock Prusa MK4S 0.25 SPEED 3DBenchy. This project file has many performance changes so you can hit ~10 minutes while staying SpeedBoatRace-compliant (standard materials, ≤0.25 mm layers, two walls, 3 top/bottom,…

Downloads
301
Likes
18
Rating
5
P
PrintablesLukasz

HDZero Goggle SpeedyBee Analog VRX cover.

This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…

Downloads
300
Likes
21
Rating
5
P
PrintablesArea51

Tank Cover for Prusa SL1S Speed

Simple cover for your Prusa SL1S Speed tank protecting resin and display from damage. Fits between tank screws, without removing them. The cover is easy to keep clean and protects the resin from UV-light is printed in a black filament.…

Downloads
278
Likes
24
Rating
5
P
PrintablesAA

Prusa SL1S Speed Tank Cover

Prusa SL1S Speed ​​Tank Cover for use with mounted tank screws Prusa SL1S Speed ​​Tank Abdeckung zur Verwendung mit montierten Tank Schrauben

Downloads
254
Likes
27
Rating
5
P
PrintablesDenna

PWM Fan Speed Control Module Case

Protective case for PWM Fan Speed Control module as it can be purchased by DONKGER on Amazon (and probably on other platforms too :) ) I provide the FreeCAD project file, in case you want to make changes to the design. Print Settings…

Downloads
247
Likes
23
Rating
5
P
PrintablesMattHecht

Speed Square

This is a speed square I designed. It has measurement increments of ¼" with numbers every inch. It also has angle measurements every 15 degreed and labeled on one side. Edit: Model can be printed vertically for better clarity on numbers…

Downloads
211
Likes
22
Rating
4.33
P
PrintablesCikro

Sigma ROX4 Speedometer Holder

Sigma ROX4 Speedometer Holder for fix with cabel ties

Downloads
190
Likes
18
Rating
5
P
PrintablesProblemPatcher

Lil Loom - 50mm & 75mm Speed Weaves

This tool will help fix small holes at patch them up in a flash. Printing all the components took ~2.5 hrs and the actual speed weaving was less than 45 minutes including taking the photos for the tutorial. Notes for printing included…

Downloads
176
Likes
117
Rating
5
P
PrintablesPeter Farell

Hoth Snow Speeder ATMOS cooler Badge

Hoth Snow Speeder ATMOS Cooler Badge. + Solo Hoth Snow Speeder. USE AtmosSnow for Cooler badge.

Downloads
166
Likes
55
Rating
0
P
PrintablesArea51

ClipOn Handle for SL1/S Speed Platform V2

Other versions: 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3 29.07.2021: ClipOn Handle for SL1/S Speed Platform Handling the build platform full of resin can be messy or unsafe if it is dropped - worse if dropped into the tank or…

Downloads
154
Likes
23
Rating
4.89
P
PrintablesMichal Potocký

Speed benchy

Hi, I'm an amateur “bastlíř”. I'm the proud owner of a 3d printer i3 MK3S+ and I want to find out the limits of this printer and how else than 3dbenches. I want to share this experience with you. For each version I always write its pros…

Downloads
135
Likes
2
Rating
0
P
PrintablesDave D

Keltec P32 Magazine Speedloader (and P3AT)

Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…

Downloads
113
Likes
8
Rating
5
P
PrintablesArea51

ClipOn Handle for SL1/S Speed Platform

Other versions: 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3 22.10.2021: ClipOn Handle for SL1/S Speed Platform V2 Working with resin printing on the Prusa SL1/SL1S can be messy and unsafe if the build platform is dropped when…

Downloads
106
Likes
15
Rating
0
P
Printablesdnagpal

Beretta APX A1 Carry Speed Loader

Speed Loader for single stack mags. There is a hanging part in the inside and you may need to use paint on supports to create support for that part. You can print with supports on too. Filament - PLA, PETG Infill - 100% (Anything above…

Downloads
104
Likes
13
Rating
0
P
PrintablesMike Rapt

PHILIPS SpeedPro (FC6823) parts

Replacement parts for SpeedPro

Downloads
102
Likes
5
Rating
0
P
PrintablesDave D

Keltec PF9 Magazine Speedloader

Speedloader for the 9mm magazine for the Keltec PF9. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print it upright with a 10mm…

Downloads
86
Likes
4
Rating
0
P
PrintablesGamma4D

Voron Cube of extreme speed

This is a voron cube that can print neatly without additional upgrades when the printer is very well assembled. Printed at @150mm/s 6k accel. Please post your time and records to makes! The temperature is set between 250 and 265 degrees…

Downloads
85
Likes
8
Rating
0
P
PrintablesSzymon Szwajca

Mario protector for SpeedyBee usb c

remix for better fit of usb c in SpeedyBee f405 v4 FC

Downloads
84
Likes
2
Rating
0
P
Printablesnerologic

Rangefinder Spacers for Speed Graphic use with Lomograflok Back

If you want to use the rangefinder on your Speed Graphic with your LomoGraflok back without needing to recalibrate it, then these spacers will have you covered. They fit both Pacemaker and Anniversary/Pre-Anni Speed Graphics. They simply…

Downloads
84
Likes
14
Rating
0
P
Printablesewr2san

The Progression of Speed Badge (GLC 300 Edition), from the Expanse ship Razorback

This is a car badge inspired by the Expanse ship Razorback, with the outline of a 2019 Mercedes GLC added. I will add any other custom car outlines in place of the GLC300 that you like: if you agree to post a make, or make a donation to…

Downloads
75
Likes
21
Rating
0
P
PrintablesJadozub

Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix

This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…

Downloads
74
Likes
6
Rating
0
P
PrintablesEvil68

Dremel 723 Speedclic box inserts

I got a Dremel 723 box with lots of attachments. I saw the indjection muldet inserts that were wasting realy much space. After about 3 hours of designing and 4 hours of printing i had my inserts and was able to free up 2 of the 8…

Downloads
60
Likes
22
Rating
0
P
Printables18dickene

9mm Speed Loader

Double stack 9mm speed loader remix

Downloads
59
Likes
6
Rating
0
P
PrintablesAdam Bennett

Ultra tiny props for High Speed Propeller Launcher

I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…

Downloads
57
Likes
8
Rating
0
P
PrintablesBnackus

Discreet Speed Knob

this knob has a print-in-place speed swivel. make sure your tolerances are adequate for print-in-place models. I used 0.2mm layer height on my ender 3 with default slicer settings.

Downloads
54
Likes
19
Rating
5
P
PrintablesAlex Muresan

Lego Speed Champions Wall Mount No Screws

Wall mount for lego speed champions line of cars.

Downloads
46
Likes
1
Rating
0
P
PrintablesD LECARPENTIER

Manivelle SpeedLoader ODIN INNOVATIONS

Placer un insert M3x5 dans le trou du bras en chauffant légèrement et en étant bien dans l'axe (une perceuse à colonne fera l'affaire). Utiliser une vis tête hexagonale de M3x20 en ajoutant un peu de frein filet pour la maintenir en place…

Downloads
40
Likes
6
Rating
0
P
PrintablesH3dSprint

Gearshift pattern - 6 speed

Gearshift pattern fit to gear lever knob which is e.g. suitable for Fendt. Printed in two steps. At first the text is printed with white filament and afterwards the rest is printed in black. Place the .stl file on the bed between the…

Downloads
38
Likes
9
Rating
5
P
PrintablesLymo3D

xy resonance speed test

This model is a calibration test designed to evaluate and fine-tune speed and resonance behavior on the X and Y axes of FDM 3D printers. By printing this test at different speeds and acceleration values, it is possible to visually…

Downloads
35
Likes
1
Rating
0
P
PrintablesPetr O

Train speed limit signs 10 - 160 kph/mph (update: 200, 250 and 300 kph/mph added!)

Train speed limit signs: 10, 20, 40, 60, 80, 100, 120, 160 kph/mph. Suitable for garden model railways, esp. G-gauge. With holes for screws. Easy to print - ideally, white filament in the bottom and black on the top. UPDATE: As this…

Downloads
29
Likes
7
Rating
0
P
PrintablesH0n_Za-

Magnetic headphones holder with microphone slot | PC case headphones mount (originally for Logitech G PRO X 2 Lightspeed

Simple holder for headphones & mic mountable on metal PC cases and other surfaces. Originally designed for Logitech G PRO X 2 Lightspeed and Sharkoon PureSteel case The microphone slots into a small groove on the front. My print…

Downloads
29
Likes
3
Rating
0
P
Printablessicarius80

Lighting Stand add-on for Flash/Speedlight

Add on to attach a speedlight to a Lighting Stand, like Manfrotto I made 2 versions, one sigle/vertical, double with vertical and horizontal hot shoe attachment. To secure it to the lighting stand, an M4 bolt is necessary. You can print…

Downloads
23
Likes
6
Rating
5
P
PrintablesNatGrayYes

WHY2025 Badge Case (Speedy Print) — The Boat Hull

The badge case by @dynom took 3hr to print on my Prusa MK4, so I designed a flatter one that I can print quicker to get more cases to more people. Built for speed not for comfort. You may be interested in my protected 18500 battery adapters

Downloads
20
Likes
4
Rating
0
P
PrintablesGreen Joe

Microshift 6-speed gear selector handle grip (12 teeth)

This is the gripping handle for a MicroShift gear selector on a bicycle. I used it to replace one that was lost. The fit is quite snug, so you will need a well calibrated printer but a little heat or grease would probably ensure it fits…

Downloads
14
Likes
5
Rating
0
P
PrintablesDvG3DAtelier

Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung

The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled

Downloads
12
Likes
1
Rating
0
P
PrintablesHaasík

Speedometer ring

Outer diameter 77mm printed with transparent filament

Downloads
9
Likes
1
Rating
0
P
Printablescyrillink

Kurt Vise Speed + Handles with bearing

Simple design easy print Extra parts needed bearing and m5 screw Pause close to the top and insert the bearing. You will not be able to insert it later. Print files for MK4 attached.

Downloads
9
Likes
3
Rating
0
P
PrintablesRob

Custom Case Design for fx impact 177 Speed Loader #2

this model of storage is for this speed loader Fx Impact 34 shot .177 Speedloader by puna102 on Thingiverse: https://www.thingiverse.com/thing:6097819 This discussion centers on a custom-designed case that I created, which is compatible…

Downloads
6
Likes
1
Rating
0
P
PrintablesRob

Custom Case for Speed fx impact 177 Loader #1

this speed loader model is for this one please see attachment the link for it created by Thingiverse user benny6 https://www.thingiverse.com/thing:5463950 This discussion centers on a custom-designed case that I created, which is…

Downloads
5
Likes
0
Rating
0
P
Printables3_Dave

TwinJet Speedboat

If you like this model, please follow my profile - it will help me a lot 😎 TwinJet Speedboat is a lightweight, balloon-powered water toy designed for quick, repeatable launches. The first two gallery images are visualizations created…

Downloads
10,817
Likes
2,634
Rating
4.76
P
PrintablesControl 3D

TEST DE VELOCIDAD (versión montmeló) / Montmeló Speed test

Test de velocidad con la forma del circuito de Montmeló para que podáis poner a prueba vuestras máquinas. La idea es ver a qué velocidad empieza a mostrar peores resultados nuestras máquinas. IMPORTANTE: Es importante que conozcas tu…

Downloads
8,038
Likes
294
Rating
4.91
P
PrintablesDaan Kleinen

Lego Speed Champions wall mount

I remixed a wall mount for Lego Speed Champions sets, as the original design had two separate wall mounts for a single set. I joined two together, ensuring they were the precise width required for accommodating any Lego Speed Champions…

Downloads
6,273
Likes
345
Rating
4.83
P

Revolver | 2-Speed Screwdriver

The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…

Downloads
6,116
Likes
2,506
Rating
4.78
P
Printablesfixumdude

Landspeeder Kit Card

We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon and tie interceptor kit cards, a coworker suggested I try a landspeeder. This was made to fit together when printed on my…

Downloads
5,774
Likes
1,993
Rating
4.9
P
PrintablesChris

.223 AR15/M4 mag 15 rnd Speedloader

UPDATE 5/17/20 I have completed 2,3,4 of the updates i thought would be good. If someone could please**try it and let me know how it works with the bottom ribs I would be forever in your debt I have printed several of the speedloaders on…

Downloads
5,326
Likes
1,100
Rating
4.64
P
PrintablesMW-Mechanical

4 Speed "Constant Mesh" Manual Transmission. 100% 3D Printed!

UPDATE: The main spacers were missing from the file list and have now been added. The hole in the hand crank has been adjusted to fit the input shaft. This is my rendition of a “constant mesh” 4 speed manual transmission gearbox. A…

Downloads
5,190
Likes
1,338
Rating
4.77
P

LEGO Speed Champions Modular Display Stand [last update 21.07.2024]

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…

Downloads
5,062
Likes
900
Rating
5
P
PrintablesRedfully

AirFlow Spinner - High Speed Fidget Toy

Meet the AirFlow Spinner , a tiny print-in-place fidget toy designed to spin fast and smoothly straight off the print bed. Its slotted wings reduce air resistance and create that “high-speed air intake” look, making it feel quick, light,…

Downloads
5,059
Likes
579
Rating
4.7
P
PrintablesFelix Wiseman

SpeedBenchy - 3D Printer speed benchmark

Note from comments: The speedboat challenge is done with the original benchy. The text is meant to be at the bottom and is part of the challenge. Any runs posted without the bottom text or other changes to the model are disqualified. The…

Downloads
4,002
Likes
63
Rating
4.71
P
Printablesnnicclaas

AK Magazine Speedloader

This is a 3d printable AK magazine speed loader for AK magazines in 7,62 and 5,45. It was inspired by the podavach U-Loader with the goal to make it 3d printable on a standard 3d printer. It gives you the ability to load AK mags at least…

Downloads
3,910
Likes
256
Rating
5
P
PrintablesMrFlippant

Bowden Speed Loader for Prusa XL and CORE One and similar for loading filament

Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…

Downloads
3,594
Likes
2,202
Rating
4.93
P
PrintablesmisterT

Speed and Acceleration Test (SAT)

This is a 3D printing speed test. It consists of two 3D models, optimized for testing speed and acceleration of the perimeters and the infill respectively. You can use these to tweak your speed and acceleration settings and look for…

Downloads
3,368
Likes
117
Rating
4.75

AIRSOFT ELECTRIC SPEED LOADER - BASIC VERSION

Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…

Downloads
3,297
Likes
360
Rating
5
P
PrintablesCraig D

Pico Squares - small speed squares

A blatant knockoff of Lee Valley's Veritas Pocket Squares (imperial and metric). See https://www.leevalley.com / for the real thing. The tops are chopped off (for ease of printing) so they are actually 1 tick short (ie the 1½" square is…

Downloads
2,919
Likes
941
Rating
4.89
P
PrintablesJLCURTIS

V400 Speeder Pad Adjustable Arm Mount

3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…

Downloads
2,460
Likes
164
Rating
4.87
P
Printablescaste1200

Ultimate Fan Speed Test for Orca Slicer

Original: Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and…

Downloads
2,329
Likes
182
Rating
4.8
P
PrintablesiDoWhatiWant

9mm Doublestack Magazine Speed Loader

Improved version for faster prints, only needs supports for the center plunger. 17/L,19/x,26,34,45 also works with P320/P229

Downloads
2,261
Likes
175
Rating
5
P
PrintablesNick

Speed / Flow Test v2

Speed Test v2 Testing your printspeed !!and change the acceleration for more speed!!

Downloads
2,254
Likes
72
Rating
4.91
P
PrintablesMatchstickMan

Lego F1 Speed Champions Wall Bracket

This is a wall-mounting bracket to be used with the smaller F1 Speed Champions Lego sets. It can be printed without supports (big, flat side down) and features a 4mm countersunk hole for attaching. Print pictured used the following…

Downloads
2,159
Likes
148
Rating
5
P
Printablesdodasch

SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED

I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.

Downloads
2,087
Likes
105
Rating
5
P
PrintablesMici

DUMMY 13 - Simplified Star Wars Speeder - V1.4

V1.4, 16. Aug. 2024: Minor changes to the simple base Minor changes to the display V1.3, 20. Dec. 2023: Simple base added V1.2, 19. Dec. 2023: Shorter lever rods Shorter lever handles Panel added V1.0, 17. Dec. 2023: first release I…

Downloads
2,072
Likes
672
Rating
4.9
P
Printables_jon

AR-15 5.56/.223 Speed Loader

Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏 Differences from the original: Added clearance for rounds Added captive guides to the pusher to keep it engaged Rotated viewing slots to allow…

Downloads
2,065
Likes
358
Rating
5
P
Printablesphysicalzero

Glock 9mm Magazine Speed Loader - 2 Versions

Glock 9mm double stack magazine speed loader - 2 Versions. One has more rounded sides on the top end. I printed these with 100% infill and they are very sturdy. These have less slack around the magazine than some of the other models I…

Downloads
2,033
Likes
108
Rating
3.4
P
Printableswolffaayyy

Airsoft Pistol Speed Loader Adapter

If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…

Downloads
2,010
Likes
199
Rating
4.88
P
PrintablesWombley

FullSpectrum Speed Palettes

Model updated! Please download new 3MFs The 3MFs re-uploaded on April 12, 2026 should now work in FS >0.9.3 and print more cleanly. Summary A reduced-palette design based on the experience of jusdisgi on Maker World and me which we…

Downloads
1,997
Likes
209
Rating
5
P
PrintablesLoboCNC

Six-Speed Keychain Shifter (print-in-place)

Are you stuck idling when you'd rather be driving? This pocket-sized six-speed gear box fidget may help. Feel free to make vroom-vroom noises as you lace through the gears. The gear graphic on the back identifies you as a proper gearhead.…

Downloads
1,966
Likes
569
Rating
4.8
P
Printablesreddadsteve

Speedy Gonzales

**Updated 9/23/2022: pants.stl reloaded with the flat side down** Speedy Gonzales, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is portrayed as "The Fastest Mouse in all…

Downloads
1,955
Likes
578
Rating
5
P
PrintablesSvB

Speed / Flow Test (40-220 mm/s)

This print is to test ones printers capabilities to print at ever-increasing speed print speeds from 40 mm/s to 220 mm/s in 5 mm steps using print modifiers.

Downloads
1,952
Likes
94
Rating
5
P
PrintablesKP design

Airsoft speedloader m4/ar15

Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.

Downloads
1,949
Likes
346
Rating
4.83
P
PrintablesRyan Smith

LEGO Speed Champions Wall Mount (2020-Current)

Hello, this is my first model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand. I designed it using a hole large enough for a screw and to be attached using a drywall…

Downloads
1,780
Likes
61
Rating
5
P
PrintablesVap3Lif3_MCMXCV

Anycubic Kobra S1 Improved Settings For Speed And Quality

This is just an improved Printer Profile and Print Settings for the Kobra S1 that increases printing speeds significantly, while not loosing out on quality. I have increased the max speeds for the motion limits of the printer as well as…

Downloads
1,747
Likes
90
Rating
4.14
P
PrintablesYosi Yaffe

Flsun v400 Speeder Pad Display Holder Upgrade

this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…

Downloads
1,703
Likes
107
Rating
4.75
P
PrintablesNoizie Works

Chain link for the creality K1 SPEEDBUMP

Use this in combination with the speedbump riser that you can download here: https://www.printables.com/model/536359-creality-k1-riser-the-speedbump-closed-and-ventila Printed in ABS supports are needed and you can use the standard bolt…

Downloads
1,663
Likes
189
Rating
4.91

RC Speed Boat

Join me as I design, 3D print, and assemble a custom RC boat powered by a high-performance brushless DC motor! In this video, I walk you through the entire process—from CAD modeling the sleek hull to 3D printing the parts, installing the…

Downloads
1,634
Likes
179
Rating
3.5
P
PrintablesW3DMaker

CZ Speed Loaders (9mm & 45 ACP)

Was looking for speed loaders with a better one handed grip and decided to make one for 9mm and 45 ACP Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament:…

Downloads
1,622
Likes
137
Rating
4.75
P
PrintablesNoizie Works

Creality K1 riser The Speedbump closed and ventilated

Riser that makes room for the canbus chain to move in a safe way instead of bunching up in the corner with the chance it unlocks the extruder (it happend twice) Both ventilated and closed models for download Supports are needed for all…

Downloads
1,622
Likes
155
Rating
5
P
PrintablesRobC

Lego Speed Champions Stand

I re-mixed the Lego Speed Champions Car Lift model to better accommodate the pre-2020 cars that are 6 studs wide (the newer cars are 8 studs wide and will not work unless you scale up the model.) I also redesigned the floor to reduce…

Downloads
1,584
Likes
233
Rating
4.79
P
Printablesk2thestank

Printer Speed Test

Place into Vase mode and hit print Category: 3D Printing Tests

Downloads
1,578
Likes
60
Rating
5
P
PrintablesAndrew

Lego Speed Champions Car Stacker

The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…

Downloads
1,447
Likes
209
Rating
4.91
P
Printablesmrusk

Airspeed Indicator for Flight Simulation

A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…

Downloads
1,438
Likes
107
Rating
5
P
PrintablesBas

Gravitrax high speed curve

My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…

Downloads
1,392
Likes
152
Rating
4.84
P
Printablesromanslezak78

Speed square in cm

Speed square size 16 cm (can be printed on Prusa Mini). It is possible to print flat (when I tried to print another speed square in portrait, it was not completely rectangular).

Downloads
1,389
Likes
328
Rating
4.95