2,763 models
Original needed supports all over. Cut into 4 individual parts that click together and the big parts can be printed with no support. Tail and tower will need structure. Easy to cut off though. Printing Tip: Print the front and back Hulls…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…
Print approx. €11.71–€14.31 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
print without support
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Made on my ender 3. The wall thickness and infill is critical to make this model (D) float correctly at the water line. I used a 0.4 mm nozzle, 0.2mm layer height, 1.5mm walls, and 15% infill. Tree supports work well. A solid version of…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
These are clock-hands inspired by the Rolex Submariner, suitable for my Clock Face Rolex Submariner style . Hour hand: Length: 69mm, designed for a 5mm shaft. Minute hand: Length: 43mm designed for a 3mm shaft . The shaft diameter are (as…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
This is a small storage tray that is meant to sit in the empty space above the gearshift in a 2022/2023 Subaru BRZ and (possibly) Toyota 86 (assuming the interiors are the same). It is meant to add a small amount of storage for something…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
print whit 2 color change and enable iron on the topmost surpace only pla/petg
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for PETGSource material: PET
Very cool Sub with wind up motor and torpedoes ! inspired by the very popular wind-up boat. Adaptation of the wind up boat motor to a submarine , made a balast system for the sub to sink a little ! ( printing in progress I will post more…
Print approx. €6.55–€8.00 excl. taxPreliminary estimate for one variant
This is the outer ring for my Clock Face Rolex Submariner style . Assembled with the parts mentioned below and a Quartz Clock Movement Mechanism, you will have a wall-clock inspired by the Rolex Submariner as shown on the cover picture.…
Print approx. €10.09–€12.33 excl. taxPreliminary estimate for PETGSource material: PET
This submarine was modeled after an Ohio class sub and named after me! Print with organic supports everywhere. This sub can carry up to 12 Trident II D5 submarine-launched ballistic missiles (unlike the 20 missiles the real models use).…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Print approx. €13.24–€16.18 excl. taxPreliminary estimate for one variant
This is a clock face inspired by the Rolex Submariner. Diameter of the face is 160mm. The hole is designed for 8mm shafts. I didn't add the Rolex crone or lettering to not violate copyrights, but with a little research in the WWW and a…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for PETGSource material: PET
Třída Los Angeles je třída amerických rychlých útočných ponorek s jaderným pohonem z doby studené války.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Bath toy
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
Do you also love hydroponics, but you drown in substrate? Here is the solution for you! Indoor hydroponics without substrate. This gives the plant even more room to grow and you have to worry less about vacuuming the pellets that fell…
Print approx. €5.85–€7.15 excl. taxPreliminary estimate for one variant
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
This model is designed to print and then assemble with almost no supports (organic recommended). PETG is the ideal material for this, and I found that black JB Weld Plastic Bonder epoxy (in the US) works well for gluing the pieces…
Print approx. €10.23–€12.51 excl. taxPreliminary estimate for PETGSource material: PET
Aeroponics is a relatively unexplored grow method that has the potential to solve a lot of the worlds issues. This design is for people who want to “supercharge” their growing while using up to 90% less water compared to conventional…
Print approx. €17.04–€20.82 excl. taxPreliminary estimate for one variant
Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
Rubber Duck combined with realistic Virginia Class Submarine parts and cool sunglasses for style points! A fun collectible for rubber duck fans with submarine interests. Use the .3mf “modular” file paired with the “accessories” file to…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
I've made this model to hold the remote for the Mitsubishi mini split air conditioner. Print this with Support on build plate only. Optimized for a .6 mm nozzle. Printed with PLA on the Prusa MINI+.
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Mitsubishi Pajero 1987 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom Prequisites: * Some welding glue (like UHU Plast Special) * Some more bit elastic glue (like UHU Plus 2 Component…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Made specifically for Polk Audio DB 842 DVC, which has a 96.5 mm top mounting depth and a 196 mm diameter octagon screw pattern. The Polk sub is a great step up from the factory subwoofer without amp upgrade (my Civic comes with a 540W…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
I currently moonlight design for a company called Sub 0 Angling. they make hand crafted custom ice fishing rods and gear. I was playing around with some ideas and threw this together. If you are into ice fishing or angling of any kind…
Print approx. €14.09–€17.22 excl. taxPreliminary estimate for one variant
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
DE-9 (commonly referred to as DB-9) Breakout box to banana jacks. Includes two DE-9 connector holes (intended for in and out), and 9 banana jacks. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes, for…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
It is best (i would even say its mandatory) to print it in ASA/ABS for temperature and chem resistance.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Designed to be printed in vase mode (no top layer, 0% infill) and accept labels*. Labels are 15mm x 7.75mm
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This Model ist made for Powercaps with a diameter of 77mm. I made this for my Car Subwoofer. Its printed with 25% infill.
Print approx. €14.66–€17.92 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on dust covers for both the muzzle and chamber on the Kel-Tec Sub 2000. The chamber cover drops into the chamber area of the folded unit and covers both the chamber and the open end of the receiver tube, preventing schmutz…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This replaces the plastic screw that fills the extra roof rack hole for 2014 Subaru Outback... It keeps the leaves and gunk out when you're not using that mounting position. Safety note: this is not a replacement for the load-bearing…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Semi-Submersible Heavy Lift Ships are unique as they sink some, go under their cargo and lift it. Not many exist and they are very expensive so they don’t have many uses. Model can float it’s not perfect though. Model made in Onshape.
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
I use this mount for my self build irrigation system. The pump feeds a GARDENA Micro-Drip-System. I designed multiple models supporting a float switch and a connector for an additional water tank. To prevent the mount from floating, i…
Print approx. €6.78–€8.28 excl. taxPreliminary estimate for PETGSource material: PET
Guide wheels to help the process of lifting, removing, and steering large substrates from ground to table. Helps prevent scratches to substrate. Requires one 608-2RS Bearing.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
La batterie de l'iStick T80 était HS. De même diamètre qu'une 18650, elle est un peu plus courte. Ce capot/bouchon remplace l'original en métal en conservant l'emplacement des vis. Il permet d'ajouter l'espace nécessaire à la 18650.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Students will prepare joints for the purpose of teaching students in the subject of Technical Drawing. Studenti připraví spoje pro výuku žáků při přeměřování a rozkreslovní objektů Odborné kreslení.
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
decidi modelar e imprimir uma peça de substituição em 3D. Funcionou perfeitamente e agora quero partilhar a solução com a comunidade!
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
What it is A two-part printable hood (backshell) for D-Sub connectors with solder cups, in three sizes: DE9 (often called DB9), DA15 and DB25. It fits on a connector you have already soldered. The two shells are held together by cable…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
About the Project: About the Frames In my video I talk in detail about the design process, but here I also wanted to add something about the suitable filaments. The truth is that you can 3D print those frames from almost any rigid enough…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
First a little explanation: Subitus means impromptu in Latin. Karambits are a type of Indonesian martial arts knife. Disclaimer: Karambits are very dangerous and (quality) utility knife blades are razor sharp . Even if you are an…
The knife has a functional bearing. To assemble the knife you need 4x toothpicks and 12x airsoft BBs.
Sunken submarine model for an aquarium. I made it so little fish can get in (around 45-50mm in diameter) and it's a favourite hiding spot them. You need to put a little weight into the submarine so it sinks (a smal rock will do or if you…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
An easy to print and fast to assemble Type7 Sumbarine Kit Card. Print it with a low layer height for better results.
Had a request for an SMG for the Dummy arsenal and thought I'd do up my personal favorite, the Kriss Vector. Not a design from scratch, but took a really cool model (see link) and made it fit our dummy's hands. The mag extension slots…
This is a screw on oil funnel for the FA20 engine in the 2015+ Subaru WRX. It also works on a 1997 JDM ej20k so this very likely works on any Subaru engine out there. Just take the cap off and this fits into the oil filler neck. This…
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
An easy to print and easy to assemble Typhoon class supmarine Kit Card. Use it to decorate your room and to express your engineering hobby!
Use this blueprint in your fabricator, along with 1 unit of silicone rubber and 1 unit of titanium. But seriously... Print one half and then mirror it and print the other half. Each half is split into 4 pieces, so you can print it with…
Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…
WARNING: HIGH EXPLOSIVE DEVICE. When triggered, this devastating weapon rips a gashing hole in the fabric of reality - subsequent spacetime reification results in a large explosion. USE: Drop mine. Once the mine stops moving, it will…
Highly articulated 3d-printable action figure. The SUBSTRATUM PROTOBODY girl is a base figure utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different…
Engaging Playtime: The Twisty Twirl Tub Sub is more than just a toy; it's an interactive experience. With ergonomic finger idents in the nose, children can easily twist or spin the submarine, watching in delight as the propellor whirls.…
Print your own yellow submarine! For your fish tank or kids… or both :) This is a remix of really great model Print in Place Helicopter from Triple G Workshop using the same print-in-place, support-less and propeller down concept.…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several…
I am working on a better way to attach the wing. If it does not work, you might have to glue it on. Let me know if you have any questions or problems with the design.
This is for the NON NIVOMAT suspension! For further details, please refer to my work in progress, collaborative, P2 XC70 Lift Guide Here! (A PDF Version is also available under the files tab in case the link is broken) This should lift…
Creality K1, K1C & K1 Max Glass Sub Bed Mod Why? everyone's seen it. the horribly warped stock Creality beds. Some people get around this by buying expensive machined aluminum plates. But mods add up and things get expensive fast, so lets…
Summary This is a model of a Subaru BRZ (similar to the Toyota GT86) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of…
I wanted a wrecked submarine for my aquarium with a bit more detail than was available here. So I took the original C3 submarine I-52 from HastuneR, and simplified it a bit, hollowed it out, added holes and all of that for fish to be able…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Subaru Impreza 22b STI. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as…
did not find a high-quality keychain model and decided to create my own version
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
This came about during a live stream of Fun King 3D, the subject of Benchy's came up and everyone started mentioning the different iterations of Benchy's and I noticed I had never seen a Submarine Benchy! Not wanting to just do a remix by…
Mitsubishi car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
------------------------------------------------------------------------ From Original Description ------------------------------------------------------------------------ This model is RC capable and it is 1 meter long. You can freely…
For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or ABS exposed to moisture, a drybox is a key way to prevent fast deterioration of materials. For the instructions on the…
I was feeling a little bored today and suddenly I thought, “Let's make the Titan!”. This is a simplified version ready to print and assembe using a little bit of glue. My condolences to the family and friends of the people involved in…
We designed this silhouette based on a friend's car. We are attaching the photo of the car, so he can show off haha. The lines are all connected to each other so that it can be printed as a single piece. The printing is simple and fast.…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Hallo, es geht hier um ein sehr leichtes Drohnen Frame das für Freestyle und lange Flugzeiten entworfen wurde. Weil ich einfach nur Freestyle fliegen möchte habe ich mich für 3,5 Zoll Drohne entschieden. Die 3,5 Zoll Drohne versuche ich…
A NON_lethal replica of the knife from the video game subnautica and subnautica;below zero Category: 3D Printing
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Summary This is a model of a Mitsubishi 3000GT / GTO VR4 (Z16A / Gen 1) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts and spoiler ;-) After printing, the model can be assembled with…
I found the files on Thingiverse and printed them for a friend. It is a working model engine (35% scaled) with parts color-coded... Sort of. It's really cool! This is NOT my original design, it is a make from Thingiverse. I do not know…
Thanks Eric for the file, This was extremly difficult to break down and seperate. It was completely full of mesh errors. The split file was / is the best thus far and as an untested print I can't gurantee it will all line up with out…
Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…
Thread: M12x1.25 Knurled, ergonomic shift knob made for manual Subaru Outback
The subspace tripmine from roblox, used by Taph in the game forsaken. The core can be strung to the shell by using thin wire, and you can scale it up or down depending on how big of an explosive you need (It does not really explode it is…
We all live in a yellow submarine! More files here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters
Just a simple triangle for downloading and modifying.
Model can be printed without supports, and scaled to any designed size. Photos of the model have been scaled. The model in the aquarium has increased Z height The model on build plate was printed at 50% (this was too small for my liking,…
My attempt to reproduce a knife similar to the one in Subnautica (rights of Unknown Worlds Entertainment), with a hexagonal handle pattern. The blades and part of the handle were printed in Silk PLA and the rest in TPU. It is also useful…
Electrical Grid Series - Sub Station Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Substation. Guaranteed to process and stepup/stepdown all of the electrical…
A remix of Hexibase's subwoofer designed for clear side panels, so the cool waveguide is visible. It would also suit wooden sides. It's smaller than the Hexibase version, so it will print on a 19cm x 19cm print bed. I kept exactly the…
Ma petite impression qui nécessite maintenant de passer en carrosserie pour le ponçage et peinture.:) :)
Model of a Los Angeles class fast attack submarine
Subaru Impreza (Bug Eye) Dash Clock Panel Known to Work on a 2002 Subaru Impreza Outback Sport. I recommend CF Nylon. Use a pair of vice grips to pull outward on the rib to make the gap wider while installing the clock (these old plastics…
A single gauge pod that replaces the existing dash vent in any Subaru Impreza WRX/STI 08-14. For left hand drive, you can mirror the model in your slicer. Material: Ensure to print with a higher temperature resistance material. PLA likely…
