Search results: t2

Sort order

2,044 models

P
PrintablesPrusament

Tension Meter for the GT2 belts of i3 MK3S+ or Prusa MINI+

The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37,072
Likes
5,941
Rating
4.89
P
PrintablesTinkrMakr

Concept2 Rower Phone Mount - Model-D

Phone mount for the Concept2 Model-D Rowing Machine. I was not happy with how the other mounts I found placed the devices above the rower display. Felt too high and unnatural to use during a work out. I created this one to mount just…

Print approx. €2.22–€2.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,059
Likes
97
Rating
4.86
P
PrintablesTB

Prusa MK3s y-axis belt holder - GT2

I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
894
Likes
135
Rating
4.76
P
PrintablesMichaelQ

Stromer Mudguard Extension V9 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
29
Rating
4.71

Boat Prop Propeller for RC Boat (Contixo T2)

It actually needs work for top performance.

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
261
Likes
12
Rating
0
P
PrintablesMichaelQ

Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
243
Likes
22
Rating
4.5
P
PrintablesMichaelQ

Stromer Mudguard Extension V10 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
219
Likes
20
Rating
0
P
PrintablesSpacehuhn

Adafruit Trinkey QT2040 Case

A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
199
Likes
12
Rating
5
P
PrintablesAme

Quest2 \ Quest3 \ Quest3S - Wall Mount Stand

I created this model to easily hang my Quest 3 and its controllers on the wall or under a shelf. Print "WallMount and WallMountNose" or “UnderShelf” You can use an infill of 15%. It does not need supports. The model is designed to join…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
40
Rating
4
P
PrintablesR.R.

F1 Ferrari Tipo 312T2 1976 #1 Niki Lauda

1976 EXOTO TIPO 312T2 Fourth, 1976 Grand Prix of Italy, driven by Niki Lauda Nobody expected 1975 World Champion Niki Lauda to return to the cockpit after his tragic accident at the Nurburgring on August 1, 1976. In the days after the…

Print approx. €8.21–€10.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
12
Rating
0
P
Printables3DP-MAMSIH

MMU2s Idler 20 teeth Pulley Fit GT2-6mm

HI! print this idler / selector with different material, but it's a waste every time; so i came with this simple design combine the 20t 6mm gt pulley with the tensioner to make it more solid, hope it can make the process less complicated…

Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
37
Rating
5
P
Printableskyleireland

Jumper T20S RDC90 Gimbal Protector

Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
8
Rating
5
P
Printablesjrsone

ProLine LST2BK Speaker Stand Clamp

This is a replacement clamp/clutch piece for the ProLine LST2BK speaker stand, which has an outer tube diameter of 38mm (lower part of stand) and an inner tube diameter of 35mm (upper part of stand). There is an M6 nut and bolt that clamp…

Print approx. €4.93–€6.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
12
Rating
5
P

Holder for SM-T225 for glass wall - Samsung Galaxy Tab A7 Lite tablet holder

print with PLA Model might warp, because it's so flat and wide/long, so corners might bend and detach from bed - destroying the print, so make sure you have cleaned bed and have good bed levelling. Holder is sticked to the glass wall with…

Print approx. €8.67–€10.60 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
8
Rating
0
P
Printablesjwingenroth

Echo GT225 trimmer choke lever

The original design had a paddle for your finger that was prone to being hit by the pull cord handle especially if it slips from your hand. This would quickly snap off the paddle. This design should be less prone to this failure.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
3
Rating
0
P
Printablesredangel1984

GT2 Belt Tensioner for Drawbot & 2020 Profile Laser Engravers

It's exactly what the title says. If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 You just need: 1x M3 Square Nut (trimmed like in the pic and) 1x M3 Screw of your desired length…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
23
Rating
0
P
PrintablesBenschCraft

Vorwerk VT270 vaccum cleaner nozzle adapter

found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG

Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
8
Rating
0
P
PrintablesCopyRited

Audio Technica AT2020 Mic Stand

I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…

Print approx. €3.57–€4.37 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
9
Rating
0
P
Printablesbassklampfe

Wall mountable housing for BME-280/SHT21 and similar sensors

This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
9
Rating
0
P
PrintablesIvosus

Remote Control - FAAC XT2 868 - CASE

Remote control case. Two versions, one with buttons. The other version only has holes. The case is designed to prevent accidental button presses in your pocket. perimeters: 4 layers: 0.2 I look forward to seeing photos of your prints. :-)

Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
1
Rating
0
P
Printablesgiblitz

24" bubble level end cap (YT24A00)

End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
4
Rating
0

Nokia T20 Tabletständer

Tablet-Ständer für Nokia T20 oder ähnliche Tablet's, die nicht dicker als 8,2mm sind. Im Fuss ist eine Freistellung für einen Winkel-USB Stecker. Mit der Stütze kann man die Neigung für die entsprechenden Bedürfnisse anpassen. Source…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
2
Rating
0

Motorola Talkabout T210 Walkie Talkie Holder – Fits 3-Pack Radios

Description: This is a free 3D-printable holder specifically designed to fit the Motorola Talkabout T210 Rechargeable 2-Way Radio (Black with Red, 2-Pack) . The holder was modeled to securely hold your walkie-talkie in a convenient,…

Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
0
Rating
0
P
PrintablesF Engineering

Diffusor for Nitecore MT21C

Simple diffusor for Nitecore MT21C. Suction fit on either end of the flashlight. Vase mode Einfacher Diffusor für Nitecore MT21C. Saugende Passung für beide Enden der Taschenlampe. Vasenmodus

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
3
Rating
0
P

Watch holder for Huawei Gt2

Watch holder for Hauwei GT. It has the holes for zip ties. At the back there is an extrusion, because i wanted to hang it on a cilindrical object. You should scale the object to 1000.

Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
6
Rating
0
P
PrintablesCharles Clare

NetAlly NXT2000 MAC M2 Laptop Screen holder

This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
2
Rating
0
P
PrintablesCharles Clare

NetAlly NXT2000 PC Laptop Screen holder

This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with WiFi Explorer Pro. (this one is for a thicker screen) Will print…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
3
Rating
0
P
PrintablesAntherea

Fixierung für Fahrradblinker TURNTEC T2

Der Busch & Müller Fahrradblinker TURNTEC T2 wird nur durch gespreuzte Gummiringe im Lenkerrohr gehalten und tendiert dazu, bei Benutzung aus dem Lenkehrrohr zu rutschen. Das vorliegende Modell besteht aus Käfigen um die Blinker, die…

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1
Likes
1
Rating
0
P
PrintablesRH3D

GT2 Pulley - the big collection updated

PROJECT HISTORY Edit 20.4.2023: HUGE UPDATE I completely remade my parametric model that helps me generate pulleys more easily. As a result: I reuploaded all files with cleaner .stl files. Now smaller pulleys available - some have very…

Downloads
7,334
Likes
642
Rating
4.9
P

GT2 Belt Tension Meter w/Bearings

Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…

Downloads
3,550
Likes
1,029
Rating
4.82
P
PrintablesJerryie

Porsche 911 (996) GT2 kit card

In scale 1:64 To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer 0,16mm layer height

Downloads
3,500
Likes
855
Rating
4.82
P
PrintablesUWcharlie1983

Porsche 911 GT2 Slot Car Body

This is a Porsche 911 GT2 (Type 993) slot car body. It is designed to be used on the "Scalextric Super Resistant Team GT Lightning" car chassis. Those cars are widely available for around $25. Approximate scale = 1:32. Much of the credit…

Downloads
2,956
Likes
214
Rating
4.75
P

Porsche 911 (996) GT2 Kit Card (1:24 scale)

Summary This is a model of a Porsche 911 (996) GT2 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the…

Downloads
2,829
Likes
550
Rating
4.75
P
PrintablesFH

Involute GT2 Pulley

There are already working implementation of 'gt2 pulleys' available. Nonetheless that implementations are mostly based on SCAD which results in mesh files. If you prefer to model project parts directly in Fusion 360, this thing is for…

Downloads
2,805
Likes
174
Rating
5
P
PrintablesDžino

Pulley GT2 - 20T B5

GT2 - 20T Tensioning toothed pulley with bearing for toothed belts GT2 - 6mm. For 5mm axle.GT2 pulley for NEMA 17 motor with a 5mm shaft. These pulleys include 2 M4x4 grub screws. Created by dzino GT2 - 20T Napínacia ozubená kladka s…

Downloads
2,312
Likes
78
Rating
4.67
P
PrintablesNEMO-MK2

Starcraft2 marine

You wanna piece of me boy? :P Use body and arm files for print. If you need full model, use full file. And take a look my other models :P All the 3D models of NemoMK2・Cults (cults3d.com)

Downloads
2,105
Likes
221
Rating
5
P
PrintablesJarda K 66

GT2 Belt Clamp

GT2 Simple Belt Clamp

Downloads
2,042
Likes
221
Rating
4.75
P
PrintablesArea51

GT2 Timing Belt Holder/Clip

The GT2 Timing Belt Holder/Clip is a simple and efficient solution for most 3D printer projects. It is designed to securely hold GT2 timing belts, which are commonly used in 3D printers and other CNC machines. The model comes in two…

Downloads
1,997
Likes
141
Rating
5
P
PrintablesAngus B. Clark

Counter-strike Dust 2 Wall Art Map (de_dust2) - CS:GO/CS2

Remix of the popular dust2 model by Frenzaih, updated to print better and (in my opinion) be slightly more accurate. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps,…

Downloads
1,816
Likes
265
Rating
4.83
P
PrintablesMyTechFun

Closed loop timing belt GT2 60mm dia

Closed loop timing belt GT2 60mm diameter. Suggestion to print from hard TPU (95A or 98A), no fill gaps, thicker wall if necessary. Tested on MyTechFun, torque is not too big, compared to regular belt. More details in the video. Important…

Downloads
1,801
Likes
168
Rating
4.57
P
Printablesrogerquin

GT2 Belt Mounted Y-Stop for SOVOL SV06 3d printer

This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…

Downloads
1,678
Likes
234
Rating
5
P
PrintablesEA3D

Timing Pulley GT2 (20T, 8mm bore)

Timing Pulley GT2 20 teeth Bore 8 mm Body dia. 16 mm Body length 16 mm Belt width 6 mm

Downloads
1,488
Likes
65
Rating
5
P
PrintablesJanus Pannonius

GT2 Belt Generator

. It is a Fusion 360 project which is capable of parametric generation of GT2 timing belt. Fill the Parameter table then print with TPU, great material to print this type of belt.

Downloads
1,430
Likes
83
Rating
5

Perfect Belt Generator | GT2 Timing Belts

Summary This is a GT2 timing belt generator for Autodesk Fusion 360. Download this parametric Fusion 360 archive file to generate timing belts with arbitrary numbers of teeth, widths, and pitches. Parameters width - width of belt…

Downloads
1,414
Likes
119
Rating
4

[OEPU] GT2 Pulley Collection - Parametric

GT2 belt pulley parametric model for fusion 360. Use the .f3d-file to adjust parameters the bore size limits the minimum circumference / amount of teeth. If you do not have fusion, I hope a fitting size can be found categorized below as…

Downloads
1,357
Likes
123
Rating
4.5
P
PrintablesEldarHan

6mm GT2 Timing Belt End-Clip

Designed for 6mm GT2 Timing Belt If the fit is too tight, try resizing the model or account for shrinkage in your slicer settings. Dimensions Standard: 10.06 x 4.18 x 7.40 MM Taller/Mirrored: 10.06 x 4.18 x 8.80 MM Update Added taller…

Downloads
1,232
Likes
118
Rating
4.83
P
PrintablesRH3D

GT2 belt jig - DIY closed loop belts

Simple jig for making your own closed loop gt2 belts. This is quite simple method - probably not the best but I have tested it many times and I have belts made with this method in use for few months now without issues. Still use it at…

Downloads
1,127
Likes
175
Rating
4.94
P
Printablesxwing

60T GT2 pulley

60-tooth GT2 pulley with 5 mm bore. Support yes Print with 5 perimeters, infill 50%, filament PETG, layer 0.1 mm.

Downloads
1,109
Likes
41
Rating
0
P
PrintablesHedo3D

Huawei Watch GT2/GT2-e (46mm) - charging station also for closed wristbands

Da ich keinen Ladeständer für eine Huawei watch GT 2 gefunden habe welcher mir gefallen hat und auch ein "geschlossenes Metallarmband" unterstützt, die meisten sind für die normal enthaltenen Gummibänder und diese müssen geöffnet sein,…

Downloads
1,087
Likes
81
Rating
4.91
P
PrintablesTrocheHole

GT2 Belt Clip for Kingroon KP3S

Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts. (Although these are designed for the KP3S, they could be used for other applications as well.) Updated [ September 1, 2022 ] ────────── A shorter clip has been added.…

Downloads
1,076
Likes
222
Rating
5
P
PrintablesDoranku

T2, M42, M48, 1.25" adapters

Somehow I keep loosing these adapters, so here is a 3D printable set of anything I could think off. Obviously print them in a colour that doesn't allow light to come through, black is a good choice. PETG seems a good choice, it is a…

Downloads
1,067
Likes
40
Rating
0
P
PrintablesChas1397

DHT22 Case

This remix allows the use of sensors I purchased off Amazon (HiLetgo) that had a different style of connector from the sensor the original case was designed for.

Downloads
1,043
Likes
69
Rating
4.71
P
PrintablesTrocheHole

GT2 Belt Fastener

A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.

Downloads
1,030
Likes
208
Rating
4.92
P
Printablesspiggytech

Oculus Quest2 & Quest3/3S Controller Pistol Grips with a Base Plate & Hanger

Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…

Downloads
1,029
Likes
115
Rating
5
P
PrintablesDžino

Pulleys GT2 - 20T set

Pulleys GT2 - 20T created for 3D printing. For GT2 6mm belt. Created by dzino

Downloads
905
Likes
78
Rating
4.25

T250 - The worlds fastest 3D Printer

Description The T250 is a next-generation, high-performance 3D printer built from the ground up for speed, reliability, and print quality. With verified real-world acceleration of up to 250,000 mm/s² and sustained print speeds exceeding…

Downloads
895
Likes
854
Rating
5
P
Printablesmoebio

T-ring T2 adaptors for Canon EOS for telescopes

T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.

Downloads
854
Likes
63
Rating
5
P
PrintablesAndrás Bognár

GT2 Timing Belt (Parametric, editable pitch and length)

After days of researching and inspecting lots of GT2 profile drawings I finally could recreate an editable version of it. I included a screenshot of the Fusion 360 parameter panel so you can easily modify it to your needs. Printing This…

Downloads
844
Likes
49
Rating
2
P
PrintablesMossyMav8802

1/3 Scale Federal Signal 3T22A (REDONE)

README: All stls are already in the correct print orientation. Motor: Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc You can find these for decent prices on ebay. If you want to have the more common…

Downloads
829
Likes
55
Rating
5
P
PrintablesRK23

3D Print GT2 80t 5mm Bore - 6mm Belt Pulley (Remix)

This is a remix of thing:5158444 that I modify to suit my need the original design is working ok, but I want to simplified the 3D model.. I'm omitting the screw-assembly and opt for glue-assembly only, adjusted the locking-tab and notch…

Downloads
812
Likes
50
Rating
5
P
Printablestato_713

Motorola Moto G52 G72 G82 & Edge (2022) xt2205 case

Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…

Downloads
790
Likes
34
Rating
4
P
PrintablesCasual CNC

Planetary Reduction Gear for NEMA 17 with Ratio of 5:1 and 25 GT2 Teeth

Planetary reduction gear for belted z-axis driven by NEMA 17 stepper motor. It has a reduction ratio of 5:1 and 25 GT2 teeth. This results in 10 mm/rotation. It may be mounted as a drop-in extension/replacement if your current drive has…

Downloads
777
Likes
272
Rating
5
P
PrintablesMossi Brossi

Belt Runner - GT2 Belt Length Matcher

I got paranoid double, triple and quadruple checking belts everytime I had to cut a pair for a corexy gantry, so I created this to make it a quicker job. This tool operates similar to a clothes zipper using the meshing of the teeth on the…

Downloads
749
Likes
336
Rating
4.94
P
PrintablesJack

GT2 belt connector

connects 2 GT2 belts

Downloads
713
Likes
74
Rating
4.33
P
PrintablesEG_13

GT2 belt end clip

Once hooked to belt - its not going anywhere :-) Due to small size - better to print with smaller nozzle, like 0.2. I had none so printed with 0.4 and later had to do small clean up but it still came out well. Hope it helps P.S. belt end…

Downloads
706
Likes
93
Rating
5
P
Printablesruredi87

gt2 belt end clamp

Use at shown at the pictures. 1- Pass through gt2 belt in cover 2- Push fit belt to toothed profile 3-Slide cover to toothed profile With this way you will secure the cover so it won't get loose over time.

Downloads
703
Likes
81
Rating
5
P
Printabless2sP

Gridfinity | Base: Skelet | 5x5 | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Downloads
699
Likes
37
Rating
4.67
P
PrintablesStanley

Nema 17 Stepper 5:1 Planetary Gearbox with 5mm shaft for GT2 pulley

Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…

Downloads
690
Likes
114
Rating
5
P
PrintablesDan Royer

Simple GT2 timing belt from tutorial

This is the model that accompanies the youtube tutorial at https://www.youtube.com/watch?v=_PyS34djcyw In the tutorial I show how to model simple timing belt to perfectly fit in your mechanical models. Leave no part out!

Downloads
685
Likes
32
Rating
5
P
PrintablesSir Kruppos

Gates GT2 Belt Tension Meter Dual Sided

Inspired by tension meter inspired by Prusa but with a gauge on both sides, optimized for ABS. I use it to tune the belt tension on all my Voron printers. Since I mainly print ABS it's been optimied to give the best results when printed…

Downloads
667
Likes
64
Rating
5
P
Printablesmotey

Timing Belt Pulley GT2 80t 6mm sleeve for 20t pulley

Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/ HINT : Voron moved away from printed Z gears. This is only a makeshift alternative…

Downloads
656
Likes
57
Rating
0
P
PrintablesLord Skippy

Over-engineered DHT22 / AM2302 Board Case

Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…

Downloads
645
Likes
54
Rating
5
P
PrintablesRapidSpatz

Chain Care Tool (V2) for Concept2 RowErg

Advanced and Tilted version of tool to hold the chain of a Concept2 in position for maintenance, inspection and oiling without the need for a second person. Use it at your own risk. I printed my version with Prusament CF-PETG with a 0.6…

Downloads
645
Likes
73
Rating
5
P
Printables3DMakeCZ

Airbus Eurocopter EC-135T2

Model: Airbus Eurocopter EC-135T2 helicopter !!!MODEL BUDE OPRAVEN DO 30.9.2024 MOMENTÁLNĚ NA TOM PRACUJI!! !!!THE MODEL WILL BE REPAIRED BY 9/30/2024 I AM WORKING ON IT CURRENTLY!!! English: Czech: Print Settings Printer brand: Elegoo…

Downloads
632
Likes
44
Rating
5
P
PrintablesJack

GT2 Belt Tensioner

Tensioner, in Line or also swivel for connector or screw terminal end for 6mm GT2 Belt

Downloads
629
Likes
125
Rating
5
P
Printablesaivasyuk

GT2 Belt Clamp

I needed a GT2 belt clamp that could handle an outside loop, and couldn't find one, so I made this, which just slips over the side of the two belts placed back-to-back. I printed using PLA with 4 walls. Category: 3D Printer Accessories

Downloads
610
Likes
39
Rating
5
P
PrintablesRenanAz

Universal GT2 belt tension gauge - anti skew

This is remixed version of the belt tension gauge for up to 10mm GT2 belts (specially for the FLSUN v400). While using the normal model, I noticed that, once i reached the 3rd belt, the gauge was permanently bent and the result was not…

Downloads
607
Likes
39
Rating
5
P
PrintablesLipo Efe

Gt2 Pulley

Layer High : 0.2mm or better Wall Thickness : 1.2mm

Downloads
570
Likes
43
Rating
4.67
P
PrintablesKen226

GT2 6mm and 9mm Belt Tension Meter

Edited on 12/13/23. V4 has small handles on the front to allow you to open the jaws to slip onto a belt more easily. Also, added a right handed version, and expanded the surface contact area of the arms rubber band hook, to reduce the…

Downloads
568
Likes
89
Rating
4.5
P
Printablessquirrelf3d

Printed 80t timing pulley - 6mm belt- using a GT2 20t timing pulley - 8mm or 5mm bore

This uses four m3x8 screws and a gt2 20teeth timing pulley with either 8mm or 5mm bore The front "lip" of the gt2 20t pulley will pop off easily with pliers make sure to keep pressing on the gt2 20t pulley while securing the screws. I…

Downloads
554
Likes
64
Rating
5
P
PrintablesLeoquart

Concept2 Indoor Rower (model D) Device Holder - Easy to print - No supports

After a couple of years rowing I've notice that using the phone on top of the PM5 rower monitor with the provided phone holder I've been developing the tendency to arch the neck while rowing (especially on the initial "catch" position).…

Downloads
553
Likes
70
Rating
5
P
PrintablesDrewDeeDoo

Garmin Zumo XT2 Tread2 tread 2

This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…

Downloads
545
Likes
28
Rating
5
P
Printableskrisztian96

Toyota Avensis T25 Bonnet Hood Holder clip 53454-20020

I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…

Downloads
532
Likes
23
Rating
0
P
Printables3DPrintBunny

BTS BT21 ornament (version 2)

This is my second BT21 ornament, see the other one and lots more BTS and K-Pop themed objects by clicking on my designs link below Easy to print, no supports required, makes a great gift for a BTS fan (ARMY). @3DPrintBunny All my KPop…

Downloads
519
Likes
61
Rating
4.8
P
PrintablesPapryko0

Honeycomb-style keychains with car brand logos. part2

I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…

Downloads
517
Likes
114
Rating
0
P
Printablesabasson

PMS5003 / DHT22 (or BME280) / ESP32S Air Quality Sensor case

This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…

Downloads
505
Likes
49
Rating
0
P
PrintablesNeilR

Fuji (Fujifilm) X-T20 grip, works on X-T10, X-T30 too!

The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…

Downloads
504
Likes
44
Rating
4

Smartphone mount for indoor rowing machine (Concept2 Rower PM5 monitor)

You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…

Downloads
501
Likes
49
Rating
5
P
PrintablesLukáš OK1ECH

Universal FT240 Balun / Unun Box

Box for a balun or unun of your desired configuration wound on a FT240 toroid. Features: M5 bind terminals with winged nuts used to quickly connect or disconnect antenna radials. The ring with 8 holes in the middle of the bottom part is…

Downloads
492
Likes
53
Rating
5
P
PrintablesYG Park

P1S poop bucket2 with slide

It's a design that added a slide and removed the top part from the previous version. Due to the supporter of the existing logo, it takes a lot of time and the thin supporter is also unstable, so I deleted it. So this model is printed…

Downloads
488
Likes
32
Rating
5
P
PrintablesDanB

Moderator/Muzzle Brake for T200 Air Arms air rifle

This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…

Downloads
472
Likes
44
Rating
4
P
Printablesskyaee

GT2 Belt Tension Meter with Bearing-Modification Board

Modifications: 1. Add bracket cage 2. Increase the length of the pointer slide rail.

Downloads
466
Likes
66
Rating
0
P
PrintablesCalebTimoteo

BT21 - Koya (BTS)

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
462
Likes
72
Rating
5
P
PrintablesDolmaster

DHT22 Outdoor case

DHT22 sensor outdoor box. The box is designed to prevent water ingress, allow air flow, and mitigate overheating by the sun. It also has a chimney to avoid the problem of condensation. This piece is still under test. 4 m3 screws are…

Downloads
458
Likes
20
Rating
4.5
P
Printablesmadcap

Concept2 iPad/Tablet holder

This print allows you to use your iPad while rowing. It is designed to slip onto the PM5 monitor of a Concept2 rowing machine. Please note that you need to ensure that the thumb screw for the PM5 is tight enough to stop it falling…

Downloads
455
Likes
58
Rating
0
P
PrintablesTheCenda

Thumbgrip for Fujifilm X-T20/X-T10/X-T30

Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.

Downloads
453
Likes
45
Rating
4.75
P
PrintablesTechNerd

PISTOL VR magnetic gunstock Oculus Rift-S Quest Quest2

Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…

Downloads
445
Likes
199
Rating
0
P
Printablesirukard

GT2 6mm Belt Idler Pulley Mount for V-Slot 2020/2040

GT2 belt idler pulley mount for V-Slot aluminum extrusion profile. Print with no supports. Easy to mount and service. Ideal for belt driven v-slot carriage. Focused on providing the longest possible travel distance. Back side of the belt…

Downloads
437
Likes
38
Rating
5
P
Printablesprint3Dtv

Print2Play: Chess Set

Print2Play: Chess Set Description: The ‘ Print2Play Chess Set’ offers a 3D-printable version of the classic game of chess. With a king standing at 61 mm and a pawn at 35 mm, this set captures the essence of traditional chess in a slightly…

Downloads
429
Likes
25
Rating
5
P
Printablescodos

Small Shelf for IKEA Skadis (remix of nt2021)

Made a remix of nt2021s shelf with stronger hooks an only 2 supports at the bottom for cleaner design. Update: Corrected the slight angle of the shelf by decreasing the tolerances. Print Settings Printer: Prusa mini+ Rafts: No Supports:…

Downloads
424
Likes
79
Rating
5