22mm Schneider XB5 Installation Tool
Simple to use, printable tool to help install 22mm Schneider XB5 Harmony Front Elements. Loose fit over the nut and screwdriver like feel. Comfortable to use.
- Downloads
- 206
- Likes
- 18
- Rating
- 4.83
Counting matching models…
Simple to use, printable tool to help install 22mm Schneider XB5 Harmony Front Elements. Loose fit over the nut and screwdriver like feel. Comfortable to use.
I have a unique space and I wanted something to “holster” my M12 installation driver on the underside of a shelf above my standing desk. Most options I could find were wall mounts. I printed it with minimal supports standing up. Due to…
This is my replacement printed screw for many installation electrical boxes Download -> Share -> Print -> Rate -> Donate -> Enjoy -> Thank you Created for printing without supports Print instructions Model is created for compatible…
Jednoduchá inštalačná krabica pre rozvod napajania napr. pre svetlá na oplotení. Zo spodej strany je privedený vstup z predchádzajúceho svetla a odchod na dalšie svetlo. Z hora je výstup na svietidlo. Pre dodatočné utesnenie som na hornej…
This is a simple, easy to print and easy to use, 3 piece clamping mechanism to facilitate installation of the belts and carriage on the Voron 2.4 and Trident. You need two sets of these, one for each side of the carriage. I personally…
These are the files needed to mount the 3DChameleon onto the Creality K1 and K1 Max printers. Also included is the profile for the K1 (K1 Max just needs the distances and build plate size adjusted.) To install: Remove the front left screw…
This is a gantry installation hook for voron 2.4. It fits to 2020 extrusions and helps lifting up the gantry to the frame easy. The hook is 12cm long. The lower part is 6mm thick and fits into the extrusion. The upper part has a 2cm wide…
## Diseño conceptual Esta figura de bebé alienígena presenta un diseño detallado y encantador, capturando la imaginación y ofreciendo una pieza de exhibición única que llamará la atención de todos los amantes de la ciencia ficción. ##…
The front edge of the print plate should sit 38mm behind the front edge of the frame so here is the jig for that.
As I was installing a Stages crank arm on my Shimano 105 crankset I realized too late that I was missing the tool to remove and adjust the crank cap. I MacGyver'd my way through it but decided to make a tool should I ever need to adjust…
Tool used to install percussion caps on black powder guns
Latest Update: 10.07.2023 - Issue with the mounting location of the AMS filament buffer: In the previous files, the recess for the filament buffer did not align properly with the printer's frame. This caused the backplate to bend and…
Ein kleines Helferchen um die Montage / Demontage einer Fahrradkette zu erleichter. Egal ob Kettenschloss oder Niet. Ich persönlich benutze es hauptsächlich für eine Shimano Road 11-fach Kette. A small helper to make the…
Hey, i created this Rockshox seal installation tool for 35mm seals like Pike / Lyric / Yari Forks. i would recommend 25-30% infill. 5top, 5bottom
ATTENTION: You need M3 threaded inserts with a length of 3mm and suitable M3 screws. Special feature: Optimized for 0.4 mm nozzles, without supports (but bridging). My recommendation for the print settings: Material: PLA Layer: 0.2mm…
This is a installation/allignment guide for MGN12 linear rails on 2020 extrusions. The fit is quite tight so there is no play when installing the linear rails.
The Freecad file is included if you need to make any changes. Printed in PLA. 0.2mm layers, 3 walls, 15% cubic infill. I uses a dozen installing a 12 ft x 15 ft floor.
(DE) Alles Scheisse? :-) Nein, aber wackelige Toilettensitze sind echt nervig. Deshalb habe ich einen Montageschlüssel zur Befestigung eines Toilettensitzes entworfen. Wenn die Griffigkeit durch die Rändelung nicht ausreicht, kann durch…
Flooring Spacer for Installation of Laminate/Vinyl/Wood. For 1/4” & 1/2” Gap. Designed to stay in place
This is a simple temporary support to help install the primary mirror on your Hadley telescope. Can also be a nice stand to install the cell on the mirror and let it cure (~24 hours) before further handling. Very specific, but it was…
Simple device which clamps to a bicycle rim to keep the bead from unseating while working with particularly tricky or tight-fitting tire installs. Saw a post on a facebook bike mechanics' forum about the Motion Pro Trail Bead Buddy which…
Adapterplatte für die Installation des Sonoff NSPanel Pro 120 PW auf Standard 68mm Unterputz Installationsdosen mit 60mm Geräteschrauben abstand. Der Adapter funktioniert sowohl für die horizontale wie auch vertikale Montage. Eine leicht…
Esta figura 3D de Luffy en estilo chibi comiendo carne captura a la perfección la energía y el humor del protagonista de One Piece . El modelo está diseñado con un alto nivel de detalle , texturas cuidadas y una base plana estable , ideal…
Added versions for - Holder for 6mm belts and 3mm backer behind extrusion - Holder for 9mm belts with and without backer
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
A self designed terminal block for your solar installation. It was designed to fit a mega fuse as well. It also can be used as a single terminal without fuse. The cover prevents accidantial discharges. All you need is 2 M8x25 plus 4 M8…
This is a model I made to be able to more easily remove the tight multiboard pieces, you can screw it in slightly and then push either left or right. I knurled it for better grip and put a socketed end on to tighten/loosen the bolts and…
Low profile RockShox Dust/Oil Installation Tool for forks using 35mm stanchions. Fits satisfyingly with a "click" on the dust seal. Designed to have a very small footprint to save space in the toolbox for other stuff. Opensource design:…
Milwaukee Installation Drill/Driver (FDDX) Wall Mount. Milwaukee_FDDX_wall_mount_2ah Pictured model. Milwaukee_FDDX_wall_mount_4-6ah Extended 3 mm to fit 4ah + 6ah batteries. Note: Designed for M5 counter sunk screws. Video link:…
LED light mount for Flashforge Adventurer 5X (AD5X) 3D printer enclosure. The Flashforge Adventurer 5X is a great printer, but the lack of internal lighting in the enclosure makes it difficult to monitor prints. The official LED module…
hey guys, i found a lack of halo rings on the whole internet, so i decided to model the whole halo ring in fusion and print it out. you'll need 15 segments (or 30 half segments) to complete the ring. the inside is hollow so you can…
My own IKEA SAMLA 22L Box Filament Spoolholder for a 25mm Installationtube. It's printable without Support. UPDATE 17.02.2019: added a 3mf file for own modifications. Print instructions Category: 3D Printer Accessories Print Settings…
This design is based on Adafruit's orginal jig: https://learn.adafruit.com/heat-set-rig I had some 3030 aluprofile pieces at home so at first I decided to fit the original design. Later on I have: changed the carriage mount dropped the…
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…
This is a remix of this model: https://www.thingiverse.com/thing:4960535 I really wanted to use it with the DDD Wall Control System so I made this. The lock piece is optional. I found that the drill stays on just fine without it but it's…
This mount is to solve the problem of mounting the interchangeable head pieces from the popular (and very useful) Milwaukee M12 FUEL Installation Drill/Driver kit on a Wall control system utilizing the DDD wall control style mounts. Other…
Also known as the "Deck d--k" on Reddit. This is a quick jig that makes putting deck boards on a deck go a lot quicker. It sets the proper gap between the deck boards, and it aligns with the joist beneath and acts as a screw guide so you…
Print, install 4 heatset inserts, use. Uses 8mm m3 to secure to the belts And ~ 30mm m3 to pull togetehr. Best use with PLA or other stiff filaments.
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower , I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the…
These are a life saver when trying to get that detent, spring, and pivot pin installed. I have uploaded this model to save to come back to as I would like to remix one to work with the ar10. please give a like if you download. thank you.
PLA works just fine. PETG is a recommended material given loads and being stuffed in my tool bag. Suggest gyroid infill.
VORON AB Belt Installation Helper (Clamp)
Made this to hold twin cam tapered gaskets during installation. Design has bottoming lip to set gaskets at correct depth. Has an M12 1.5 hole in the center to use a bolt as a driver handle.
This is a tool to help spin the retainer ring for Mercedes-Benz electronic ignition system modules. You can use a 3/8" or 10mm ratchet on an extension just like the official MB tool. Don't use screwdrivers (like in the video) ever again!…
Fit good and stable, for more stable i add holes for some magnet, I printed this in PETG on the Elego Neptune Max with a 42cm x 42cm bed size. You can also split this model if needed and use some glue."
Do you love Gridfinity? Do you love magnets? Do you hate installing magnets into your Gridfinity bins? Well, you aren't alone. I've always found it to be a particularly fiddly process to make sure you have the right polarity and to keep…
Modelo de stand para pantalla de 7" táctil con conexión HDMI, adquirida en aliexpress. La carcasa incluye una base para mantener la pantalla inclinada, además de integrar en la parte trasera la instalación de una raspberry pi modelo 3 o…
フロントを上に向けて印刷したほうがきれいです。
Milwaukee M12 Installation Tool Gridfinity base. A combination/remix of a couple of different model. Version 2 should allow for a shorter drawer and use less material.
Note I have updated the jigs but left this version up as it might be of use still. New: https://www.printables.com/model/673666-futures-fins-finboxes-router-jigs-updated I created these jigs to help me install the Futures style finboxes.…
Concealed installation triple box for separate frames . The axial spacing of each box is 84mm! = Not applicable for common frame. The individual boxes are connected at the top and bottom, so there is no twisting during installation into…
I designed this to be used with the Milwaukee 2505-20 M12 Fuel Installation Drill/Driver. However, it could work with any Milwaukee tool which uses the same belt clip, but the angle, when installed, may not work for some tools. I printed…
Set for installing electrical sockets, switches, or lights in insulation. Electrical installation box for insulation. The base is 220 mm and has grooves for shortening. The weight is approx. 125 g (you can adjust the size in the slicer…
While installing the tiles 'off surface' I was tired of installing and removing tiles and wall supports and back and force just to drill the holöes ... My drilling guide already made life easier, but the tiles were a bit flimsy and…
I designed these parts to mount linear guide rails on the Y axis of my Elegoo Neptune 3. This kit could be used for any 235x235 machine with 4040 Y axis extrusion. The linear rail adapter is universal left and right, which is why it's…
This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…
This allows you to clamp the XY Belts (GT2, 6mm but might work with wider belts as well if the teeth are the same) with one M3 screw of the X-rail (might need to use a longer one) for easier installation or changing parts without having…
I didn't want to pay $200+ for a Sir Tools P234 arbor so I whipped this up. I sell these for $15 if you do not have 3D printing capability, but I am offering it (for NON-COMMERCIAL usage) here. That means you are not printing these and…
This is a pegboard-mounting holder for the 4x heads that comes with the Milwaukee M12 Installation Driver. It would likely suit the Fein one as well as I believe they use the same mounting/connection style. Hole spacings are 50mm centres…
Esta figura 3D ultradetallada representa al icónico payaso Pennywise en su versión clásica, perfecta para coleccionistas y fanáticos del terror. El modelo incluye: Base circular plana para exposición. Globos realistas en la mano derecha.…
This tool is for the Govee Permanent Outdoor Lights Pro installation. It is an installation tool for VisualReversal 's (Printables website) friction grip mounting brackets. It mounts them at a Govee-recommended distance of 8 cm or 3-1/4…
Edit 05/09/2022: I'm adding a new version of the tapping block and leaving the old one in case someone prefers it. I've used the original V1 block for about 9 or 10 hours of hardwood floor installation and while it works quite well in…
I made this tool after getting a used 2018 Sierra Denali that must've been owned by a hamfisted degenerate; all of the cigarette lighter covers had been ripped off and broken. Finding this tool (Dorman 56457) was needed to remove the…
Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…
Door handle installation jig. This is a remix where I changed the dimensions to be metric: - Hole saw (the big one): 54mm diameter - Lock hole (the small one): 25mm diameter The big hole has a 60mm offset (backset) from the edge of the…
I wanted to store the installation tools close to the drill, which is hanging from my Skadis in my Ikea Ivar. So after finding the T-Nut system I did some small modifications to the original and this is the result. Hardware needed: 2x DIN…
¡Trae al Caballero de la Noche a tu colección! Este es un busto de alta resolución de Batman , inspirado en su estética clásica de los cómics. Ha sido esculpido prestando especial atención a la expresión estoica, la definición muscular y…
Raspberry Pi Zero 10" Rack Mount Bracket Panel - Staffa installazione Pi Zero rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: 06/02/2025 added resized model…
A mount to add the ANTCLABS BLTouch to the BQ Hephestos Prusa i3. Users have reported this design also works on the Anet A8 and other printers. This mount is easily installed behind the blower fan. (You may need longer screws) For…
Rohrclips M25, RohrHalter M25, M25 Installationsrohr Drucken, Liken, Bewerten, Kommentieren.
Please leave a Like :-) This is a Remix of https://www.thingiverse.com/thing:3517496 I Just constructed a 3x Box and some Mounts aditional. I also designed a "Slide in and Rotate Clip" with Notches to hold the Box or to Screw it in Place.…
I didn't like any of the edge spacers that I found for installing my new Luxury Vinyl Plank flooring, so I designed my own. I included a large flat edge for the wall side to help be stable against old imperfect drywall, and a tail at the…
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
Can also be purchased directly: https://www.audiotec-fischer.de/en/brax/accessories/dmp It is also needed to be able to use it in the Helix Director Stand: https://www.thingiverse.com/thing:6236586 We recommend using only ASA, ABS or…
(Please Note: This is still under development.) Borescope Mount and Cable Clip for MK3s. Update added 8mm and 10mm Please Note these are in Alpha so any issues please report to me. Borescope cable clip -7mm- Borescope cable clip -5.5mm-…
Es un MIX creado gracias a 2 usuarios que nombro posteriormente y les agradezco. Yo la imprimí en PLA a un solo color pero bien podrían usarse varios colores. El siguiente será usando imanes pero no se que tal es poner imanes cerca de…
A tool designed specifically for installation and removal of any threaded MultiPoint with Slots for MultiBoard. This includes a Snap-mounted holder which fits the tool nicely and allows neat storage of the tool on your MultiBoard. Print…
I made this for the Milwaukee m12 installation driver. It works as a stand and a bit holder!
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
This is a lockset installation jig very similar to what you can buy from Dewalt. It's designed for a 2-3/8" backset and gives you the exact location of the holes to drill. It also has a small indicator window to line up the correct height…
I quickly modified FarlesBarkle's design to be able to mount the adapter plate to the bottom side of CUBE handlebar mount. In this case it can be used to install a light upside-down, while on the top the garmin can stay in its place.…
Casing Installation Jigs Used to set the reveal when installing door and window casings. There are 3⁄16“ and 1⁄4“ versions. PLA Pro .2 Layer height No supports If you like, like. Enjoy!
I needed spacers to accommodate 4mm rigid vinyl plank flooring, but with enough height to catch drywall with a 1/2in gap
Wedges for installing windows
A friend of mine lost one of his 2 Ikea Nymane wall fixtures while moving. Since the fixture plate is not sold separately I recreated the part 1:1 in Fusion360 (with a little bit sturdier base plate) without the spring-loaded movement.…
I needed a way to mount a wooden dowel through the face of a panel. This design uses a compression collet to grip the shaft and hold it in place. Printed with .2mm layer heights & 30% infill. Category: Household
I posted this as remix because "makes" don't allow you to add files. I created an installation and use manual which is helpful for using this DrawBot. It explains how to install the Inkscape software and extension and how to use the…
funda de pantalla para una ender 3 V3 una con un signo de raro lateral derecho y el otro lo mismo mas dos signos de biohazar arriba si necesitáis subo uno limpia . Dejen like y come te si todo está bien o mal. Gracias
Shims are commonly added behind door hinges to adjust the gap between the door and the jamb. These door hinge shims are designed to slip behind the hinges without needing to fully unscrew the hinge from the jamb. Included are shims in 1mm…
This is made by the R400 Sensus 620 Water meters. There are already 2 mounting recesses on the glass, these are used to place the holder over it and to place the sensor perpendicular to the metal. You can attach the adapter using the push…
UPDATE: A working print head mount is now posted. My original was too high and would not home successfully. And Valerie Moore did a nice cleanup job on that if you are a perfectionist and want the nicest looking hidden surfaces! I have…
A funnel design that work with both screw and snap US Gallon milk jugs Yes a normal funnel works but that requires a decent amount of dexterity. one hand to BOTH hold milk jug and funnel and other hand to pour the carafe into the funnel.…
INDX Code One - Holder for 2 Filament Sensor Tops for the Installation on one side of the Printer. The Back-Version uses the two holes from the Frame, you need two M3x5mm inserts, the Side-Version uses the designated hole/screw. For the…
I used Siraya Tech Blu for this, using their profile settings, heating my print chamber to 30 degrees C, and giving a thourough cleaning before 15 minutes of cure time.
Needed to install a Hornady Lock-N-Load Press and Die Conversion Bushing Kit onto my RCBS Summit press. The conversion kit allows you to use the Lock-N-Load die bushings on any reloading press that has a 1-1/4" - 12 threads. I used the…
Mit dem Bogen lassen sich 25mm Installationsrohre einfach im Winkel von 90° zusammenstecken. Gedruckt habe ich den Bogen in 45° mit Support.
Raspberry Pi3- Pi4- Pi5 10" Rack Mount Bracket Panel 2U - Staffa installazione Raspberry PI 3-4-5 rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: Added versions…