Search results: tention

Sort order

Counting matching models…

P
PrintablesNiko_Ju

Ford Galaxy Seatbelt retention clip

I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…

Downloads
74
Likes
4
Rating
0
P
PrintablesPincoyo

Caution, slippery ground / Attention, sol glissant

(English follows) Si votre entrée ou votre cour est glissante, à cause de glace ou de l'humidité, voilà un panneau à imprimer en 2, 3 ou 4 couleurs. Le fichier d'impression gcode inclut les changements de couleur pour Prusa i3 MK3s en…

Downloads
56
Likes
7
Rating
5
P
PrintablesKaurH

DaVinci Resolve Mini Panel Knob Extentions

If you find yourself reaching for the knobs below the screens often, but they seem just a tad bit too short to be comfortable to use, I've got you covered! These extentions should pressure-fit right onto the existing knobs, and if you…

Downloads
31
Likes
4
Rating
0
P
PrintablesPincoyo

Caution, slippery ground XXL Version/ Attention, sol glissant Version XXL

(English follows) Si votre entrée ou votre cour est glissante, à cause de glace ou de l'humidité, voilà un panneau à imprimer en 4 couleurs. Ceci est la version redessinée pour imprimante Prusa XL avec au minimum 4 outils. Il est possible…

Downloads
21
Likes
0
Rating
0
P
PrintablesPincoyo

Caution, slippery ground XL Version / Attention, sol glissant Version XL

(English follows) Si votre entrée ou votre cour est glissante, à cause de glace ou de l'humidité, voilà un panneau à imprimer en 4 couleurs. Ceci est la version redessinée pour imprimante Prusa XL avec au minimum 4 outils. Il est possible…

Downloads
16
Likes
0
Rating
0
P
Printablesarmer_geddon

Philips Evnia 34M2C6500 Monitor Retention Clip

My new monitor arrived with a retention clip which would pop out of its hole, so that the VESA Mount or the Stand was able to slide out of the monitor Socket, until the spring caught on the edge of the hole. To fix this, I designed a new…

Downloads
3
Likes
0
Rating
0
P
PrintablesDavid Witkowski

MFJ-267 Meter Retention Bracket

The meter on an MFJ-267 Watt Meter and Dummy Load is held in place by a custom nylon retention bracket. If the unit is dropped, the bracket can break. This part replaces the OEM retention bracket. My repair part allows the reuse of the…

Downloads
2
Likes
0
Rating
0
P
Printablesschiko

Retention Clip for Pastamatic Spool Winder (Driven Spindle)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…

Downloads
3,505
Likes
291
Rating
4.98
P
PrintablesGekoPrime
Downloads
2,941
Likes
251
Rating
4.97
P
PrintablesDonJon

Safety eyes with retention ring

This safety eyes need to be printed with low layer height (0.1mm) to achieve a nice result. The eyes are made from two different parts for ease of printing (the rod and the head) that need to be glued together, and also it make it easy to…

Downloads
2,387
Likes
274
Rating
4.82
P
PrintablesSteamroller17

Better Hex Bit Case | Parametric | Magnetic Closure | Spring-Tab Retention | Print-in-Place

A parametric case for standard 1/4″ hex bits , designed for practicality and flexibility. The main case is print-in-place and uses 4 mm DIA × 1.5 mm or 3 mm thick magnets to keep it securely closed. The spring tabs in each row hold the…

Downloads
1,100
Likes
536
Rating
5
P
Printablesfigterk

LTT Screwdriver Bit Holder Magnetic Retention (Multiple Sizes)

This is a remix if the inner portion of my original model. This one is intended to be printed with rigid filament (PLA, PETG, ABS, etc.). It has the corresponding number of holes on the bottom to insert 6x3mm magnets for bit retention.…

Downloads
1,015
Likes
132
Rating
5
P
PrintablesMordiev

MMU2s Tension Screw Retention Washer

Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…

Downloads
854
Likes
78
Rating
4.78
P
Printablescdeox

AM4 - Original Retention Brackets (Cooler Mounts) - Extended

Hook part extended by 5mm on both mounts. Category: Computer

Downloads
768
Likes
18
Rating
5
P
PrintablesFrankyD80

IKEA Metod Förbättra legclip for cover panel incl. extention variants

I designed this feet / legclips for the IKEA kitchen METOD and its plinth FÖRBÄTTRA to: be more stable with PLA and PET be printable as one or multiple parts (to glue together) have multiple length to avoid “Aufdoppeln” and fit my needs…

Downloads
755
Likes
52
Rating
5
P
Printablesilike2design

AMD CPU Heatsink retention bracket, socket AM2 AM2+ AM3 AM3+ FM1 FM2

This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…

Downloads
727
Likes
25
Rating
4
P
PrintablesEWJ

AM4 Backplate & Retention Bracket

Uses 4 M3x15mm bolts 4 M3 nuts 4 M3 washers (optional) The backplate has a second version which doesn't require supports and will bridge the overhang instead Consider rotating the retention mount for better strength. That will instead…

Downloads
645
Likes
32
Rating
4.75
P
PrintablesVERBtheNOUN

Safety eyes with retention ring (head 8mm and rod as one piece)

Remix is the head (8mm) and rod piece together as one piece. No glue required.

Downloads
574
Likes
51
Rating
5
P
PrintablesHud

XT30 Retention Block For Control/Expansion Hub

Printed with no supports, .2 layer height, 4 top and bottom layers, 3 side layers, 40% infill.

Downloads
531
Likes
17
Rating
0
P
PrintablesMagda j

cat playing board extention and remixes

You probably printed already "Cat toy playing board pegs play" and your cat figured it out pretty well or you have more than one cat and the board is simply to small for both of them. Then you need this collection of extensions and…

Downloads
440
Likes
146
Rating
4.86
P
Printableskzkz

Sovol SV08 closed top extention lit with filtration (HEPA+Carbon) up:27.07.24

Sovol SV08 closed top extention lit with filtration. You can use Roborock S7 Hepa filter and carbon filter at the same time. Upgrades: Fully closed Stackable Filtration Cut-outs for the fan and the filament sensor cables Every parts…

Downloads
437
Likes
98
Rating
5
P
PrintablesPreppo

Original Prusa Enclosure (OPE) - Door Seal Heat Retention

Key Features of the Door Seal Add Heat Retention: Our door seal brings the heat, literally. It's all about insulation, creating a stable printing zone that spells primo print quality. Reduce Drafts: Reduce unwanted temperature shifts, the…

Downloads
435
Likes
159
Rating
4.94
P
PrintablesNydendarin

NEW Pixar Cars Trackset road extention

The newest Mattel Pixar Cars track sets (2023+) use a redesigned road connector piece. The new design has smaller connectors (which are easier to connector/disconnect) and all road pieces have attach points on the sides to connect…

Downloads
404
Likes
33
Rating
5
P
PrintablesAustin Lively

Kydex Style Mag Retention Inserts

Quick printed version of the kydex AR mag inserts you'll find in nicer pouches. If printed in PLA they will creep over time, but I've found the retention to still be pretty reliable over time. Obviously higher temp resistance materials…

Downloads
397
Likes
29
Rating
5
P
Printablesmomsz

SV08 Top Extention

The SV08 Top Extension is a crucial component designed to enhance the functionality of 3D printers. This extension ensures that when a glass plate is placed on top of the printer, the flying gantry can reach its maximum height without…

Downloads
374
Likes
56
Rating
0
P
PrintablesPhil Hodgins

Retention Clip Short Side

Print instructions: 0.2mm layer height 4 walls for strength 100% sparse infill Turn off single layer for Top Surfaces

Downloads
368
Likes
27
Rating
5
P
Printablesmotocoder

PC4-M10 Retention Clip

Many printers, especially those with a Bowden extruder, use PC4-M10 fittings to retain the PTFE tube at the extruder. Reportedly on Bowden printers it helps with retraction if the fittings at both ends have a firm grip on the PTFE tube so…

Downloads
358
Likes
59
Rating
5
P
PrintablesSocinPower

BMW E36 coupe wide fenders overfenders MOTORSPORT (attention, read description)

Updates 29-09-2024: Uploaded a 5-piece split model (inform me if it doesn't fit your printer) 26-09-2024: Uploaded the complete file of the front fender. (.step and .stl available) 01-05-2025: After some trial and error, we found out that…

Downloads
339
Likes
56
Rating
0
P
Printablesatucom

Gridfinity USB Retention Holder

Gridfinity holder for socket/female side of USB A devices. I use mine to hold USB A to USB C adapters. If desired, there is also a looser fit model. The base model is a friction fit that acts a pseudo handle. Printed with PLA+ (regular…

Downloads
322
Likes
74
Rating
3.75
P
PrintablesRiskable

Parametric Thrust Bearing Retention Ring (works with Airsoft pellets)

This .scad will generate a ball bearing retention ring of any size you want with any number of balls! I created it to work with Airsoft pellets (BBs) but it will work with any ball or sphere shaped object. The idea is to use this in a…

Downloads
308
Likes
62
Rating
5
P
PrintablesPhilip Brady

Pastamatic Retention Clip Set

This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…

Downloads
300
Likes
30
Rating
5
P
PrintablesKistek

Pastamatic Spindle Retention by Kistek

Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…

Downloads
297
Likes
43
Rating
4.5
P
Printablesrenliw

Dental Floss with Tentioner (Side Profile)

a remix of TopTop's Dental Pick, but with a different dental pick profile

Downloads
293
Likes
39
Rating
5
P
Printablesipullstuffapart

Nintendo Switch OLED Compatible Dock Wall Mount, with Retention and Slotted Holes

Are you ready to experience the next level of gaming convenience? Introducing the phenomenal Wall Mount Bracket Remix for the Nintendo Switch! Brace yourself for a description that will make your heart race, your palms sweat, and your…

Downloads
284
Likes
34
Rating
5
P
PrintablesBoris Builds

Flag Pole (1") Heavy Duty Holder / Mount With Retention Screw

A simple Flag pole holder. Anchor/bolt spacing based off standard brick joints and using 3/16" bolts. Sized for a 1" flag pole. Infill: 20-30% Infill Modifiers: 99-100% as shown in photo Support: Yes, Tree Walls: 4-6 Top/Bottom Surfaces:…

Downloads
274
Likes
38
Rating
5
P
PrintablesBudvarBoy

Cable Retention Bushing / Gland

Cable Retention Bushing / Gland for USB cables, for example from arcade sets from Aliexpress. Lock tab is 8 x 8.5 x 1.6 mm. Cable is 4 mm. For holes 18 mm or 22 mm. I printed a layer of 0.16 mm.

Downloads
272
Likes
152
Rating
0
P
PrintablesXDleader555

Bushing Retention Clip for Volkswagen MKIV First Gear Getter

Retaining clip for DieselGeek's amazing first gear getter bushing. Under heavy use, the bushing may fall out due to its friction fit. This 3D printed plastic clip slides over the bushing and holds everything securely in place. You can…

Downloads
271
Likes
38
Rating
0
P
PrintablesAkio

Omnifixo Extentions

I love my Omnifixo clamps. They are so far the best third hand I have found. But for clamping some objects it would be helpful if the clamps could be on different heights. Sure, you can stack the yellow parts of the clamps, but as there…

Downloads
262
Likes
194
Rating
5
P
PrintablesCheruTijntje

Gaggia Classic - Scale Extention

I really like this extension because you can take out the scale to use on the counter and the drip tray just rests on the sides of the base. It is a low profile drip tray, I need to drain it after each flush-brew-flush cycle. Cleaning is…

Downloads
255
Likes
69
Rating
5

Impulse Ungineering Ontos O-ring Retention Breech

The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…

Downloads
252
Likes
29
Rating
5
P
PrintablesSOVOL3D

SV08 Top Extention lit

SV08 Top Extention lit

Downloads
251
Likes
36
Rating
5
P
PrintablesGuido

Turbine 45 rpm Record Adapters - Contest Model - ATTENTION!!! Please read the description.

1,5 - 0,25 inch 45 Record Adapters - Contest Model - Correct Version Now. Sorry I had made a big mistake in my first upload. ATTENTION!!! There was a change in the match schedule. Initially, the opening diameter was specified as 0.25…

Downloads
239
Likes
38
Rating
4.83
P
PrintablesLLL

SD Card Rugged Box with retention clips , M3 or print in place (SD case)

This is a box for up to 3 sd cards, that is made to be durable, with spring loaded retention brackets to make sure the SD cards don't fall out. There are two versions, either a print in place one, or one using a 12mm M3 bolt and nut. The…

Downloads
238
Likes
72
Rating
4.5
P
PrintablesFanBlox Company

dont pay attention this is oldddd

Die of death figure from roblox. Stylized to my prefrence.

Downloads
225
Likes
21
Rating
0
P
PrintablesIzFunk3

SV08 Top Extention lit closed

This is the original "SV08 Top Extension Lit" in a closed version. Given the potential for higher temperatures inside the 3D printer, it is advisable not to print this part using PLA. Instead, using more heat-resistant materials like…

Downloads
218
Likes
23
Rating
5
P
Printablesmosselini1

End cap & retention ring for "Parametric Cable Grommet" (parametric)

While using the original model, the parts always fell apart when my cables would move slightly, so I designed this little press-fitted cap to fix this problem. The whole inner assembly could still leave the outer ring at that point, so a…

Downloads
207
Likes
16
Rating
0
P
PrintablesBuildX

#0023 Makita Driver Bit Holster with Strong Bit Retention

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've tried a few of the bit holsters out there but none seem to have worked for…

Downloads
204
Likes
41
Rating
5
P
Printablesaxellarcos

AvE Olfa 25mm Knife Retention Spring and Pin Upgrade

Replaces the spring and blade retention pin with a self retaining spring and a larger base pin, also adds one more locking lobe so the spring doesn't get squished. Print Settings: Layer Height: 0.2mm Infill: 30% Material: PETG Supports on…

Downloads
199
Likes
25
Rating
5
P
Printablestheworkshope

Anderson Powerpole Retention Clip

Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal…

Downloads
195
Likes
14
Rating
5
P
PrintablesGhostguy6

Baofeng UV5R Gopro holder With Improved Belt Clip Retention

An upgraded go-pro compatible holder for the UV5R radios. There is an added slot for better belt clip retention to help prevent movement under off-roading conditions. It also significantly helps reduce noise from the radio rattling around…

Downloads
190
Likes
27
Rating
5
P
PrintablesJoon Chor

Pastamatic - retention clips - easy open finger tabs - normal and drive side clips

The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle

Downloads
188
Likes
20
Rating
5
P
PrintablesJeff

Ka-Bar Retention Sheath (full size)

This is a retention sheath for a full sized Kabar (1211 in my case). The sheath has two lugs that bend downward when inserting the knife into the sheath and spring up behind the cross guard, retaining the knife in the sheath. To remove…

Downloads
186
Likes
12
Rating
5
P
PrintablesGamefox

Nintendo Switch OLED car mount with retention clips

Redesigned from scratch for the OLED variant's dimensions and features such as speaker ports and vents. Added retention clips to hold the device in the mount for added safety. Retained the original aesthetic although slightly modified,…

Downloads
181
Likes
22
Rating
0

Lamp Shade Retention Nut Replacement

This is a replacement nut used to clamp the shade in place on my lamp's light socket. The factory's original part broke due to heat fatigue. I printed this model on my Prusa MK3S+ using polymaker's "Galaxy Black" 1.75mm PolyLite™ PLA…

Downloads
179
Likes
15
Rating
5
P
PrintablesJon

Chisel Guard with Built in Spring Retention

Tired of cutting yourself on your chisel when you dig for something in your toolbag? Or sick of finding out that the chisel you just sharpened has been dinged by another tool in the drawer? Fear no more, these guards are easy to print,…

Downloads
169
Likes
34
Rating
5

Tether Block (retention block) for Nikon Z6 Mark II

This is a remix, adjusted and optimized for TetherPRO cable and Nikon Z6 Mark II

Downloads
168
Likes
16
Rating
0
P
PrintablesRetro Frog

Terraonion MODE Hard drive retention bracket for Saturn and Dreamcast

This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…

Downloads
164
Likes
10
Rating
0
P
PrintablesCharlie

Shaft/Axle with R-Clamp Retention Holes – Remix

The original shaft had a tendency to slide off the side supports during use, so I extended it by 2–3 mm and added holes sized for an R-clamp to keep it securely in place. Printed successfully in both PLA and PETG without issues. For…

Downloads
160
Likes
22
Rating
5
P
PrintablesDaiju Azuma

Zipper pull extention

Simple zipper pull extention.

Downloads
157
Likes
28
Rating
5
P
PrintablesRadBench

Intentionally Bad Spongebob Popsicle Ornaments

These are fun because they are supposed to be bad. Anyone who's opened a SpongeBob popsicle knows that the placement of the eyes/mouth/teeth can be way off. So there's pretty much zero pressure while building these because the worse it…

Downloads
155
Likes
81
Rating
5
P
PrintablesCaptHowdy

Rugged CR2032 Battery Box ( attention case requires foam in the lid to keep batterys in place, can result in fire if not used.)

ATTENTION: this case requires foam or something similar in the lid to keep the battery in place, if not they can come loose an mix an cause fire. i shared some images of one that had this happen an only thing that saved it was the…

Downloads
152
Likes
21
Rating
4.67
P
PrintablesDrizzthacker

Retention Clip for Pastamatic with IXO

Print 100% infill. I've used PETG because it need to be flexible. Mount between the adapter and the spool winder as you can see in the image

Downloads
146
Likes
10
Rating
5
P
PrintablesNicksk3

Scx24 bumper mount extention

10mm extention i needed for the cchand front bumper on my bronco

Downloads
144
Likes
16
Rating
0
P
Printableseric-ao

Nozzle Wrench, chamfered grip and socket retention by M3 screw

I found the original version very good and useful, however I usually squash the first layer so the part came out rather sharp on the edges, this remixed version have a chamfer for softer grip. Also, I didn't want to glue the socket…

Downloads
139
Likes
24
Rating
5
P
PrintablesKuzuCevirme

Hotas Warthog joystick Extention S Bracket

the threads are m36x2 with 0.1mm clearance. I made it to use it on my chair i hope you guys also enjoy with that. I am going to use it with THIS

Downloads
134
Likes
13
Rating
0
P
Printablesjurassic73

Sturdy Pegboard Retention Clip (remix)

Remixed the strongest pegboard clip I've seen to make it a bit more sturdy and added removal openings

Downloads
130
Likes
38
Rating
5
P
PrintablesCrackFox

Concept 2 phone or device holder with bigger retention bumps

Concept 2 rower phone or device rest/mount remix of model from Leoquart

Downloads
128
Likes
9
Rating
0
P
Printablesshr00mie

BMW E46 Floor Mat Retention Clip

Got tired of the Velcro pads failing constantly, forcing me to adjust the floor mats every damn time I got in the car. This is my solution. Printing: Small part, so go 100% infill @ .2 or smaller Button face down Organic supports on…

Downloads
127
Likes
16
Rating
5
P
PrintablesPotts

LTT Bit Holder Magnetic Retention - 60 Bit Split Insert

A quick remix of figterk's excellent bit holder for the LTT screwdriver. This is the 60-bit insert, split into 5 pieces. This is a split version of the 60-bit insert, enabling users to easily print in multiple different colors for each…

Downloads
124
Likes
19
Rating
5
P
PrintablesZ B

Centauri Carbon riser remix - no sliding top, no gaps for heat retention

This is a remix of the original to address a few issues I had: Cover was sliding off the back on some long prints due to vibrations Extruded the lip to match the front two pieces to fully retain the glass top PTFE guide was allowing too…

Downloads
122
Likes
11
Rating
3
P
Printablesoriddlero

Prusa XL TPU Full Feeding System W/ Internal PTFE Tube Retention Flanges

Full reduced friction feeding system For extruder number one on the Prusa XL from the left side mounted spool holder using an additional filament guide mounted using the same method as the OEM filament guides. The natural spring tension…

Downloads
121
Likes
23
Rating
5
P
Printablesnlaverdure

Zero retention hopper for Rancilio Rocky

Requires 10-32 screws, 2.5" lg, qty 3

Downloads
120
Likes
16
Rating
0
P
PrintablesSilvian

Baofeng UV-5R Headset Speaker Mic Retention Bracket Fix

I have the same problem as most with the UV-5R. If you move the headset plug slightly, the radio will no longer work. There is already a solution for this here. However, I didn't like it because it is too bulky and you have to buy screws.…

Downloads
120
Likes
18
Rating
5
P
Printablesnathanw

Argon Neo Wallmount, Remixed With Retention!

I had mounted my Argon Neo on the side of my Lack Enclosure, but was having issues with the case falling out of the mount over time. I remixed the design to introduce a retention clip. I opted for an interchangeable clip to allow reuse of…

Downloads
119
Likes
2
Rating
3.67
P
PrintablesCorvus

Spool Holder Retention Clamp - Bambu Lab A1

Filament Spool Holder Retention Clamp for Bambu Lab A1 to prevent the filament spool from slipping off the filament holder My print settings for PLA: 0,2mm layer height 5 walls only one wall on top and bottom layers 5 top and bottom shell…

Downloads
117
Likes
16
Rating
5
P
Printablesbiednick

Vudoo Gun Works V22 Magazine +1/+2 Extention- Long with set screws

These extensions are designed for Vudoo Gun Work's .22lr AICS magazines. I use 10 round polymer magazines, and these will not work on the aluminum magazines. In a 10 round magazine you can load 11 rounds with the loading button installed…

Downloads
115
Likes
9
Rating
0
P
PrintablesPrints_r_us

Corsair Capellix AM4 Retention Bracket

AM4 Retention Bracket for a iCUE H150i ELITE CAPELLIX Liquid CPU Cooler. Corsair has a retention bracket for sell on its web site. It is currently not in stock. So I designed this bracket in blender. 6-32 3/4 Screws is what I used to…

Downloads
115
Likes
8
Rating
0
P
PrintablesHani Issa

Jack retention system nut (Renault Dokker/Kangoo)

Jack retention/support system nut for Dacia/Renault Dokker also known as Renault Kangoo in some markets. It's an original model very close to the original part. the center screw hole Isn't fully threaded, you can directly thread it on the…

Downloads
115
Likes
18
Rating
0
P
PrintablesSuikermais

Sovol SV08 Top Extention lit BTT display hdmi 5 inch 1.2 mount

I used support 25% infill https://biqu.equipment/collections/lcd-screen/products/bigtreetech-hdmi5-v1-0-hdmi7-v1-0

Downloads
115
Likes
6
Rating
0
P
PrintablesHedo3D

Paulimot 300 mm Messschieber Schieblehre caliper Extention

Ich habe für meinen Paulimot Messchieber 300 mm ein paar Erweiterungen gebraucht, um tiefer in einer Box messen zu können. Also habe ich mir diese Erweiterungen konstruiert. Sicher sind diese nicht so genau und da es Kunststoff ist,…

Downloads
114
Likes
14
Rating
0
P

Attention Holder for Pet Pictures

Pieces should fit together nicely if opting for a multi coloured print. A bit of fishing line or string and some super glue for the whiskers and maybe a dab to keep the clip on the end of the stick. 100% Success rate tested on 5 cats and…

Downloads
114
Likes
100
Rating
0
P
PrintablesAm0nal

Gridfinity Bin Extentions

I have taken this idea from the "Multigrid Bin Extension" by Keep Making. and adapt it to the gridfinity system. This allows to extend the length of already printed bins with out reprinting them. I have made an parametric model in Onshape…

Downloads
114
Likes
42
Rating
5
P
PrintablesLord Radford

Cable Spool and Reel with Keyway and Handle Retention

I created this model to store the cable I use for hooking e-matches to my DIY electronic fireworks rig. Each currently has about 15m of bog standard speaker cable on in. The spools are easy to churn out and put together. They have a key…

Downloads
113
Likes
23
Rating
0
P
PrintablesNydendarin

Pixar Cars Trackset road extention

This was designed to compliment the Pixar Cars Tracksets. The ends of this road piece are designed to connect to the ‘older’ tracksets with the thicker triangular connection arrows. The ‘newer’ tracksets have much smaller connection…

Downloads
112
Likes
22
Rating
0
P
PrintablesFerron de Lange

Radiomaster pocket stick end/cover/extention/sleeve

I desinged this stick cover for the radiomaster pocket since I wanted to have more controll. It fits snuggly over the original metal sticks, no hardware needed. I made it to fit around 8mm sticks.

Downloads
109
Likes
6
Rating
0
P
Printablesmakrspacr

Foil Track Nut Retention Sliders

These TPU retention sliders hold hydrofoil T nuts in your desired position between sessions. They speed up assembly and disassembly before and after foiling sessions. They are easy to install, and slide to reposition with a hex or torx…

Downloads
108
Likes
11
Rating
0
P
PrintablesSebastian

Bit Driver with bit retention

For extra strength use 3 or more wall loops. Different models for more or less bit retention, retention weakens with use. (Its plastic what can you do?)

Downloads
108
Likes
9
Rating
5
P
Printableshatnii

Extention for Apple charger - Airpods Pro version

Apple charger | Iphone, Airpods, Apple Watch but for airpods pro

Downloads
99
Likes
8
Rating
0
P
PrintablesBlueberryMuffin

Crosley Cruiser CR8005D-BC Tone Arm Retention Clip Replacement

Should be compatible with any Crosley Cruiser portable model. Printed in PLA with 0.1mm layer height, 2 perimeters, supports everywhere.

Downloads
98
Likes
4
Rating
0
P
PrintablesButcher9_9

Ender 3 Cable Front Cable Retention

With my New direct drive Hot end cable management through the frame and out the back was not overly practical for taller prints so I made this bracket to retain the cables at the front over the X Axis end stop. Print Settings Printer…

Downloads
97
Likes
17
Rating
5
P
Printablesdoog2

Jonsbo D41 Panel Retention Clip

The original front/side panel retention clips on the Jonsbo D41 computer case are lousy and brittle. I decided to make these when I accidentally broke 3 of the original clips when attempting to put my side panels back on. I was able to…

Downloads
96
Likes
5
Rating
0
P
PrintablesJohnK

Silverstone FT03-mini Case Panel Retention Clip

Replacement panel retention clip for Silverstone Fortress tower cases such as FT03 and FT03-mini, may also work with other Silverstone cases. This is the small piece that screws into the side panels that allow it to clip into the case…

Downloads
96
Likes
0
Rating
0
P
PrintablesMrFlippant

Office School Busy DND Attention Help Flag

A what? With the world returning to semi-normalcy, but tele-interaction becoming even more common, sometimes it's necessary to have a "busy" indicator that can be seen easily from a distance in an "open office" setting. Stick the base to…

Downloads
92
Likes
13
Rating
4.5
P
PrintablesEvaMika

Belkin Extention lead wall mounting brackets.

Very good surge protected extension lead, unfortunately no fixing holes to wall mount it. Here's my quick attempt to design some brackets for it. Hope you find it useful. Please let me know if any adjustments are needed. Designed for 0.4…

Downloads
92
Likes
5
Rating
0
P
Printablesmenelos

Anderson Connector Retention Clip 15/30/45A

This clip was designed to prevent two connected pairs of Anderson connectors from becoming uncoupled. Quick to print, easy to attach and detach.

Downloads
91
Likes
8
Rating
0
P
PrintablesKnight Dynamics

BAKFlip Tonneau Cover strut retention clip

Tonneau cover strut retention is a small plastic clip that the cover strut snaps into during travel. REV01 added rib for increased strength. Tonneau cover is made by BAKFlip, model 448329;…

Downloads
90
Likes
10
Rating
0
P
Printablesprhough

MicroSD Card Extention Housing for Tronxy XY2 Pro

Like for most others with a Tronxy XY2 printer the MicroSD Slot is very inconveniently positioned at the back of the printer and I've used a MicroSD Extender to bring it to the front. Looking around Thingiverse I came across someone…

Downloads
89
Likes
4
Rating
0
P
PrintablesBecker Thorne

ATTENTION: BATHROOM CAMERA IS FOR RESEARCH PURPOSES ONLY, sign

ATTENTION: BATHROOM CAMERA IS FOR RESEARCH PURPOSES ONLY, novelty sign Category: Signs & Logos

Downloads
88
Likes
22
Rating
0
P

Go Pro Extention

Go Pro Extention

Downloads
86
Likes
6
Rating
5
P
PrintablesMatadorPrintor

Tibialis trainer dumbbell extention

Tibialis trainer extention for a dumbbell! This allows you to train train your tibialis, the muscle at the front of your legs, and strengthen them. Great for preventing shin splints and general athleticism. It is a single piece, built for…

Downloads
86
Likes
23
Rating
0