Search results: thermal

Sort order

539 models

P
PrintablesGummientchen

Thermal Paste Spatula

Prints in a couple minutes and helps spread thermal paste on a CPU.

Downloads
2,841
Likes
143
Rating
4.91
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Downloads
1,844
Likes
1,231
Rating
5
P
PrintablesAlexvdg

Star Wars Thermal Detonator, accurate size

Edited version of the thermal detonator by OddWorks. I made it somewhat smaller to be closer to the size it has in the movie and edited the switch so it's a bit more accurate/interesting looking. I printed the button/switch on it's side.…

Downloads
1,632
Likes
661
Rating
5
P
PrintablesPyrohmstr

Cyberpunk 2077 Arasaka Thermal Katana

A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…

Downloads
1,413
Likes
464
Rating
4.13
P
PrintablesUncle Jessy

Bambu Lab A1 Bin - Death Star Thermal Exhaust Port Version

Help take down the empire with your new A1 3D Printer by flinging poo through the Death Star Thermal Exhaust Port opening! I modeled this in Shapr3D and there is a version without the exhaust port opening as well ;) Print in place, no…

Downloads
1,409
Likes
270
Rating
5
P
PrintablesBaGooN

Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter

I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…

Downloads
1,390
Likes
92
Rating
5
P
PrintablesPiney29887

Thermal Printer Label Holder

This is my solution to having flat or rolled labels just laying on the desk behind my printer. Most any filament should work. I used PETG at 260°, 0.2mm layer height. The main body printed in eight hours 27 minutes and the two roll…

Downloads
1,286
Likes
100
Rating
5
P
PrintablesRoel Veldhuyzen

Thermal Detonator

This is a Thermal Detonator, consisting of four parts. The top and bottom halves of the sphere, a sliding button that goes on top and a small cap that will cover an LED in the top half of the sphere. The files has four holes that can…

Downloads
1,235
Likes
311
Rating
4.92
P
PrintablesYa Ikou!

Thermal Label Printer Stand - Support Free

Edit 06 May 23: If you're encountering interference with the labels and cables, @darkspeedy26 created an awesome label guide: https://www.printables.com/model/472863-label-guide-for-thermal-label-printer-stand-suppor Edit 22 Aug 22:…

Downloads
1,105
Likes
145
Rating
4.83
P
PrintablesReProps

Thermal Detonator(Star Wars and The Mandalorian

This my version of the Thermal Detonator that shows up multiple time in the Star Wars universe(most notably in RoTJ and the Mandalorian). Here’s my build video for this, showing how I modded it to have lights and how I painted it,…

Downloads
834
Likes
300
Rating
4.5
P
PrintablesLWC

PVS "Nachtmahr" 50Hz thermal vision, light weight, DVR recording, monocular

Join the PVS420 Discord where you can find the ongoing development of the PVS Nachtmahr and much more. https://discord.gg/Ce9BJ2DK3j Archiving 1:1 perception by using a 640x512 x9 thermal camera using a 0,39" display and a NP18 lens +…

Downloads
743
Likes
218
Rating
5
P
Printablesgoldsquadron

Thermaltake Core P3 360mm Radiator/Fan Mount

A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…

Downloads
685
Likes
31
Rating
4.5
P
PrintablesLWC

PVS Gremlin V2 50 FPS budget 640 thermal monocular

Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN Including firmware, updates and much more. https://discord.gg/Ce9BJ2DK3j The New N6 and P6 thermal cores available with a 9 and 13mm lens and 640…

Downloads
684
Likes
139
Rating
5
P
PrintablesNIMIETY Online

NIMIETY Thermal Label Paper Holder/Roller

The 3D printed thermal label paper/roll holder is a compact and versatile accessory for efficient organization. Designed with precision, it securely holds thermal label rolls of various sizes, ensuring smooth dispensing and preventing any…

Downloads
629
Likes
54
Rating
5
P
Printablesjaztermareal

Star Wars Droid Popper EMP / Thermal Detonator for 1:12 , 1:6 and 1:1 scale figures and cosplay

Here is my attempt to create the droid popper / thermal detonator from Star Wars It is scaled for use with 6 inch figures, 12 inch figures and also as a life size prop for cosplay. Any issues please let me know. Have fun!

Downloads
626
Likes
134
Rating
5
P
Printablesjaztermareal

Pokeball Thermal Detonator for 1:12, 1:6 and 1:1 scale figures and cosplay Star Wars Pokemon mashup

Pokeball style thermal detonator… because you just gotta take out those pesky Lep droids in style. Scaled to 1:12 (for 6 inch figures such as Hasbro Black Series), 1:6 (for 12 inch figures such as Hot Toys and Sideshow clone troopers) and…

Downloads
608
Likes
222
Rating
5
P
PrintablesLWC

PVS GREMLIN V1 50Hz helmet mountable mini thermal vision monocular

Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN and much more. https://discord.gg/Ce9BJ2DK3j The PVS "GREMLIN" features some impressive specs for its low price including a 640 resolution thermal core,…

Downloads
600
Likes
132
Rating
5
P
Printablesrotto

Rollo thermal printer stand with fanfold label holder

I needed a stand for my Rollo thermal printer. There are a few out there but for labels on a roll - I have the fanfold type so I designed my own desktop stand. It's designed for my printer model ( X1038 ) but I included the Fusion 360…

Downloads
570
Likes
77
Rating
5
P
Printableschochi3D

Thermal Paste Spatula

I'm pleased to introduce an innovative spatula designed to facilitate and expedite the application of thermal paste. It's designed to be easy to print, very fast. I used PLA+, with a layer height of 0.2mm. Really cheap, used approximately…

Downloads
496
Likes
30
Rating
5
P
PrintablesBasementLAB

Thermal Paste / Epoxy / Glue Spatula - Spatola ergomica per pasta termica / colla

Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…

Downloads
495
Likes
61
Rating
4.75
P
Printablesofer k

Stanley thermal cup key chain

This little key chain looks like a thermal cup. I printed a Stanley logo on it but you can put any logo you want. this is printed on its side (so as to get the handle strong) with tree supports. you can also print it with no supports if…

Downloads
491
Likes
56
Rating
0
P
PrintablesMuth

Pure Thermal 3 case

A small case to protect the FLIR Lepton 3.5 mounted on a Pure thermal 3 board. It has a protective shutter to hide the lens. 8 small M2 screws needed, better with 4 M2 spacers of 6mm. Board on groupget :…

Downloads
461
Likes
9
Rating
0
P
Printableselcubano

Thermal Paste/Epoxy/Glue Spatula

Liked the size and shape of the original design. However the edge was too thin for mixing/spreading epoxy. The edge is now ~1mm thick. If you like to scale it to increase size, keep the overall height at 3mm to maintain the edge of the…

Downloads
460
Likes
40
Rating
5
P
Printablesc-arts-modelle

Lukisegler: swappable thermal wing (2650mm wingspan)

Swappable thermal wing for the Lukisegler rc-glider This wing is designed for the Lukisegler rc-glider ( https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider ) to give it better thermal gliding properties. You can…

Downloads
458
Likes
58
Rating
0
P
PrintablesPiney29887

Thermal Label Holder II

This is my UPDATED solution to having flat or rolled labels just laying on the desk behind my printer. This unit is considerably stiffer than the previous version and prints faster as well.

Downloads
452
Likes
45
Rating
5
P
PrintablesReProps

The Mandalorian's Grav Charge Explosives/Thermal Detonators

This is my version of the Grav Charges used by the Mandalorian in the TV series The Mandalorian. Here's my printing and painting video for this, https://youtu.be/88RAbjf0Fa8 . You may need to fill the dome with some bondo or spackle if…

Downloads
446
Likes
172
Rating
4.5
P
PrintablesGreenPea

Rusan MAR scope/thermal covers

I once saw a similar idea but they didn't fit. So I designed my own from the ground up; the scope cover has four wings and a knob that will also work when wearing gloves, put them in the adapter and tighten the adapter to lock. The…

Downloads
433
Likes
9
Rating
5
P
PrintablesTurnt

MUNBYN Thermal Label Printer Roll Holder

I picked up a MUNBYN Thermal Label Printer from Amazon for a good price and ordered the Thermal Direct Shipping Label (Pack of 500 4x6 Per Roll Labels). It needed a holder to work, they sell a holder for $35AUD but this cost approx $5AUD…

Downloads
428
Likes
29
Rating
0
P
PrintablesPrints_r_us

Thermaltake Core P3 45 Degree Radiator Bracket

I created this bracket to allow for a large gpu to be installed horizontally. Mounting wholes are sized to use fan screws to attach to the P3's frame.

Downloads
418
Likes
38
Rating
5
P
PrintablesJim The SOG

Thermal Carafe Pitcher 1:12 Dollhouse Scale Accessory

This is a thermal carafe for 1:12 dollhouse scale. This is not based on a particular design or model, it's pretty generic. While not intended to be functional, the lid screws on, the spout does have a hole that runs through, but the…

Downloads
379
Likes
185
Rating
5
P
PrintablesLWC

PVS D.A.R.T. 1 (Direct Action Reconnaissance Thermal) 50fps, 640x512, 1:1 monocular

UPFRONT: C6 Core was just released and the link updated! listing is still in screening process and should be accessible from 20.06.26! Core arrived and its a worthy sucessor to the P6 providing an even better less grainy picture with high…

Downloads
356
Likes
56
Rating
5
P
Printablesdarkspeedy26

label guide for: Thermal Label Printer Stand - Support Free

UPDATE 17/06/23: My labels are coloring brown as i leave my labelmaker in sunlight for longer periods of time. To counter this i added an optional removable sunlight-cap. (green and red parts in the picture) ---- I needed this label-guide…

Downloads
354
Likes
63
Rating
5
P
PrintablesSquirtle

Thermaltake V21 Harddrive Cage

I did not like the orignal hdd cage of this case. Also it offered only place for three 3.5" hard drives and it was hard to access the drives. As I am using this case as a server, I wanted quick access and place for 4x 3.5" harddrives. In…

Downloads
349
Likes
28
Rating
0
P
Printablesdbizal

MUNBYN THERMAL PRINTER STAND (Label Roll)

THERMAL LABEL PRINTER STAND for MUNBYN (Label Roll Only) USE THE REMIXED CAP by @Incision_4687121 Linked below. https://www.printables.com/model/1686068-munbyn-thermal-printer-stand-label-roll-improved-e/files Made this because the one I…

Downloads
341
Likes
45
Rating
5
P
PrintablesArrowpilot

Uni-T UTi260B Thermal Imager lens cover

Simple sliding lens cap for the UTi260B thermal camera to protect the sensor better. The camera ships without case or lens cap and I felt that it needed one. while designing additional close-up lens holder I drafted the profile of the…

Downloads
337
Likes
19
Rating
5
P
PrintablesUF_Icarus

Thermal Label Holder (2 Sizes)

— Overview — A simple label holder for thermal labels so they can easily feed into a thermal printer. — Side Note — Images shown are an earlier version of the models. Minor changes have been made to improve the design. Please review the…

Downloads
334
Likes
27
Rating
4.5
P
PrintablesEmbrace Making

Thermaltake Core P3 TG Pro Fan Mounts and Slot Covers

Installation and assembly depicted in the above video. Thermaltake Core P3 TG Pro only comes with a single fan mounting bracket. I used mine on the side of the case and wanted to limit the amount of dust coming into the case from the top.…

Downloads
321
Likes
27
Rating
5
P
PrintablesLWC

PVS 840 thermal vision budget 50hz binocular

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Downloads
318
Likes
116
Rating
5
P
PrintablesCT3D

Label holder for thermal printer

Holder for rolled labels! Works perfect for the printer PM-241-BT. Can be printed from PLA and PETG.

Downloads
311
Likes
16
Rating
0
P
PrintablesTymek

Jadens Thermal Printer stand with fanfold label holder

Compact stand for fanfold type labels for you Jadens printer, printed in PLA. Very likely to warp so take care

Downloads
310
Likes
29
Rating
0
P
Printablesaquila

Topdon TC001 TC002 thermal camera lens mount

Topdon TC001 and TC002 thermal camera lens mount Rasperry pi, left: with macro lens 76.2mm, right: without (both images scaled and cropped to show the approx. the same excerpt. The closest distance where the image was as sharp as possible…

Downloads
305
Likes
43
Rating
5
P
PrintablesAlexey Rogov

Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter FormD Ncase T1

Liteweight remixed version with zero gap between radiator and fan body, 25mm fans support in 3 slot mode, precise strong mount, support Corsair Venegance memory sticks and similar height even with shift brackets for AM5

Downloads
297
Likes
25
Rating
5
P
PrintablesMartunex

Cover for Thermalright Peerless Assassin 120 SE Heatsink/Heatpipes

I strongly recomend printing with PETG or any better heat resistant filament, as PLA might deform inside due to the high temperatures the inside of a computer can get while gaming or any high load task. Specifications: -No supports…

Downloads
254
Likes
20
Rating
0
P
Printablesjaztermareal

Star Wars split Droid Popper EMP / Thermal Detonator for 1:12 , 1:6 and 1:1 scale figures and cosplay

UPDATE: realised that the 3 front lights are supposed to be on the upper half not the lower half so I completely remade them. look for v3 files in the file list. Here is my attempt to create the split droid popper / thermal detonator from…

Downloads
253
Likes
75
Rating
5
P
Printablesdevilryascended

Scotch Thermal Laminator Tray Replacement

The original tray for my wife's laminator broke after the cats knocked it off the nth time in a day so I decided to design a new one. I had a lot of issues with designing the tabs that it locks into. They work currently but if I feel like…

Downloads
253
Likes
5
Rating
0
P
PrintablesHyperbeam

Thermaltake Tower 300 Computer Fan Guard Grill (140mm)

This was designed specifically for the Thermaltake Tower 300 Computer case to stop your fingers and cables from getting caught in the fan blades when taking the top panel off. This can also be used for the optional rear fans connected to…

Downloads
252
Likes
30
Rating
5
P
PrintablesStraws

Thermaltake Versa H17 Airflow mod

I made this model in order to keep using my old case, the Thermaltake Versa H17, but with my new processor that produced much more heat (i5-12500). However, the stock H17 is not a very good case in terms of airflow, and there are…

Downloads
245
Likes
11
Rating
5
P
PrintablesKickthefog

Mystic Seer Twilight Zone - Thermal Printer

This is a working replica (and a remix of a Clockspring design) of the Mystic Seer from the original Twilight Zone series https://en.wikipedia.org/wiki/Nick_of_Time_%28The_Twilight_Zone%29 Print instructions Here is a link to the Seer in…

Downloads
243
Likes
49
Rating
5
P
PrintablesVanGoghComplex

Thermaltake Core P3 Radiator Bracket - 360mm Crossflow

This is my latest version of my radiator bracket for Thermaltake Core series chassis. This one should allow you to mount a 360mm X-flow radiator between two posts of your Thermaltake Core P3. It should work on any side of the case you…

Downloads
241
Likes
19
Rating
0
P
Printableschking

Thermaltake Core P3 5.25 Vertical Drive Bay

Thermaltake Core P3 5.25 Vertical Drive Bay Print Settings Print with the bottom side on the build plate (for orientation see P3 Dual Drive Bay.3mf). Needs lots of supports

Downloads
229
Likes
26
Rating
0
P
PrintablesFlapstaart

Thermaltake Core V21 replacement case feet

Replacement snap-in feet for the Thermaltake Core V21 PC case. The original ones just snap off when you try and move your case without lifting it up. I created these to replace them as I couldn't find any existing replacement designs and…

Downloads
225
Likes
6
Rating
5
P
PrintablesPrints_r_us

Thermaltake Core P3 Fan Mounts

Thermaltake Core P3 120mm Fan Mounts. Use rubber foot screws to secure.

Downloads
224
Likes
25
Rating
0
P
PrintablesAndr3a

Thermaltake Core P3 Psu Cable Cover

Thermaltake Core P3 PSU Cable Cover

Downloads
219
Likes
18
Rating
0
P
Printablespixelglance3d

MK2.5/3 Fan Shroud Thermal Runaway FIX

Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary Improved version to mitigate THERMAL RUNAWAY errors. (Re-Mix from the original Prusa Fan Shroud) Air-flow properties have…

Downloads
219
Likes
21
Rating
5
P
PrintablesHyperbeam

Thermaltake P3 TG curved or flat glass side panel extra fan/raidator mount bracket (3x 140mm or 120mm fans or any 120mm-360mm radiator)

This bracket for the Thermaltake Core P3 with the curved or flat glass side panel allows an additional three 140mm or 120mm fans to be mounted or any 120mm, 240mm, or 360mm radiator at the top or front of the case. The only other parts…

Downloads
214
Likes
9
Rating
5
P
PrintablesMax

18650 - 3S holder with thermal and electric isolation

This is not the most flush design, it leaves some gap to provide isolation. I used 2 clips of 1cm out of ABS and it turned out super nice at the first try. You can simply scale up/down Z to your desired dimension. The hole is there to…

Downloads
205
Likes
20
Rating
5
P
PrintablesaerdnA

Thermaltake Core V1 replacement feet

Printed without supports, 20% infill, 0.12 layer height. Original feet have a little rubber/felt pad glued on the bottom, transfer it across or replace it with a new one of a similar height or things won't be level.

Downloads
205
Likes
11
Rating
2.5
P
Printablessimonek012

Electrical installation box for thermal insulation / elektroinštalačná krabica do zateplenia

Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…

Downloads
202
Likes
19
Rating
5
P
PrintablesShameless Makes

4x6" Shipping Label Bin for iDPRT Thermal Label Printer

After purchasing an iDPRT 4x6" thermal label printer on Amazon, I quickly became annoyed by how messy the stack of labels got sitting off behind the machine as there was no included organization with the printer. They sell a separate bin…

Downloads
194
Likes
22
Rating
5
P
Printablesruredi87

Ryzen thermal paste cover

Ryzen processor perfect amount of thermal paste cap. When you put cooler on the cpu thermal paste thickness will be 0.1mm Category: 3D Printing

Downloads
193
Likes
22
Rating
0
P
PrintablesLWC

Helmet mounted battery pack vor PVS840 thermal binocular or others.

Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…

Downloads
185
Likes
35
Rating
5
P
Printablesmcbeenb

Thermaltake The Tower 900 Pump Mount Adapter for EK-Quantum Kinetic Pump/Reservoir

This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…

Downloads
185
Likes
9
Rating
0
P
PrintablesAlex Baev

BambuLab X1 Carbon (Thermal & Noise insulation BOX)

Thermal insulation, Noise insulation at your discretion The temperature inside the chamber when the table is heated +75 Celsius reaches +47 Celsius. Noise reduction - 37 decibels and below (depending on the types of vibration and noise…

Downloads
184
Likes
62
Rating
5
P
PrintablesKen Koh

Thermaltake Core P3 Fan and Radiator Mounting Bracket

Mounting bracket/arm for fans or radiators for the Thermaltake Core P3 chassis. There are 2 versions depending if you are mounting a 120mm or 140mm type of fan or radiator: 360mm mount (slimmer) (For 120mm Fans or 120/240/360mm Radiators)…

Downloads
183
Likes
7
Rating
0
P
Printableswafflecart

Thermalright AXP120-X67 Low Profile CPU Cooler Fan Duct Shroud Intake - Multiple heights

Model of a fan duct/shroud/intake for the Thermalright AXP120-X67 Low Profile CPU cooler to have it intake no warm air from inside case and instead draw cool air from side. Requires no extra parts to mount by using the holes already in…

Downloads
178
Likes
16
Rating
0
P
PrintablesDaddyDingDong

BC-250 Thermalright Heatsink Mount AXP90-X53

Parts needed for this install: Thermalright AXP90-X53 M3 S Threaded Inserts Mini Heatsink Kit M3 Button Head Screws

Downloads
175
Likes
16
Rating
0
P
PrintablesGnexia

AGM Taipan Thermal Monocular Helmet Mount

Go easy on me, this is my first design, still learning. Mount for Agm Taipan line of monoculars. Designed around a knockoff Wilcox g24 Pretty straightforward assembly with m3 screws and 1/4-20 bolt. Printed in petg. Mirror in slicer if…

Downloads
171
Likes
19
Rating
5

Thermal Master P3

Halter für die neue Thermal Master P3 Wärmebildkamera Erste kurze Version für Mikroskopstativ Zweite Version als Verlängerung. Die beiden Teile wurden mit M3-Pressmuttern und M3x10 Schrauben verbunden Dritte Version als Universalhalterung…

Downloads
167
Likes
10
Rating
0
P
Printableseggy

Space Saving Thermal Label Spool

Needed a thermal roll holder smaller than the width of my desk. This sits on top and lets the roll feed from the top. Just print 2 of the feet, 2 of the pegs, and one of anything else. Just need to glue the pieces together. Fits the Comer…

Downloads
167
Likes
27
Rating
0
P
PrintablesPaw85

UNI-T UTi690A UTi120S UTi712S Lens Cover Thermal Imager

Lens cover for the thermal imager named: UNI-T UTi690A, UTi120S and UTi712S It's a snap on fit to the thermal imager and the lanyard can be attached to it so you dont loose the lens cover when using the thermal imager. Adding the UNI-T…

Downloads
160
Likes
9
Rating
5
P
PrintablesC0rNfLaK3

Thermal Paste Spatula

ENG Simple spatula designed to apply thermal paste on CPU and GPU. Easy to use, compact, and requires very little filament to print. print settings: Very basic setup (suitable for all types of configurations) Layer height 0.1 mm Adaptive…

Downloads
160
Likes
7
Rating
0
P
PrintablesVoxel Poxel

The Holly Hexagonal Thermal Printer Stand

The Holly Hexagonal Thermal Printer Stand. Suitable for any thermal printer with a 200mm x 80mm footprint. can hold a stack of label that is roughly 72mm tall. The original was made for a Rollo label printer but it fit my Nelko printer I…

Downloads
160
Likes
14
Rating
5
P
Printablesgizsgugya

Thermalright Assassin 120 AM4/AM5 spacer

One of the included AM4/AM5 was missing for the packaging, so i mocked up an identical one.

Downloads
159
Likes
6
Rating
5
P
PrintablesArdjan

Cable cover for Thermaltake Core P5 computer case

I recently built a new PC in a Thermaltake Core P5 case. As you can see in the pics on the website and my ‘before’ photo, you can see the power cabling easily. I have the case mounted to the wall behind and above my monitor, so this…

Downloads
159
Likes
19
Rating
5
P
Printablesstugpanzer

Star Wars Storm Trooper Thermal Detonator

I made a Star Wars Snow Trooper costume and I needed the Thermal Detonator which clips onto the back on the belt. I was using a kit and didn't like the vacuum-formed one I received so I designed my own! I designed, printed and built this…

Downloads
157
Likes
46
Rating
0
P
PrintablesJackson O'Steen

AM4 Thermal Paste Shield

AM4 thermal paste shield to help with thermal paste application on 1st - 5th gen Ryzen CPUs. Helps make sure that thermal paste doesn't fall on the MOBO. Takes about 13m8s with Bambu Labs printer, and about 40m on Creality CR-10 V2.…

Downloads
157
Likes
23
Rating
5
P
PrintablesRavenwreck

InfiRay P2 Pro thermal camera case

Uses the original foam from the package cut to 40 x 40 x 17 mm (xyz) piece that is hot glued to the middle and a piece of thin felt on the lid. I have the regular version so no place for the macro lens. Uses M3x20 screw for the hinge. I…

Downloads
154
Likes
16
Rating
5
P
PrintablesVanGoghComplex

Thermaltake P5 - 480mm Rad Brackets

This pair of brackets will allow you to suspend a U-flow 480mm radiator between two of the window-mounting corner posts on your Thermaltake Core P5 chassis. They should allow you to place your rad on the top, either side, or even the…

Downloads
150
Likes
10
Rating
5
P
PrintablesPinkie Pie

Thermal camera / scope - Flir scout TK ris mount plus lens protector for airsoft

Here's my gift to Polish night airsoft community - a simple mount that allows you to use old flir scout tk thermal camera as thermal scope. It has a lens protector mount included. it's all based on M4 and M3 screws , there is simple way…

Downloads
147
Likes
9
Rating
0
P
Printablesjust_printable

8 Bay 3.5 inch HDD Rack with mounts for JonsboN3 backplane and Thermaltake CoreV21 case

An 8 bay 3.5 inch HDD enclosure designed around the Jonsbo N3 backplane which can be purchased separately for ~€15. I have also Included a mounting piece for the Thermaltake CoreV21. The main assembly is fastened to the mounting plate…

Downloads
144
Likes
27
Rating
0
P
Printablesdfense

Holder for Seek Firepro X thermal imaging camera (firefighter equipment)

The original holders were inconvenient foam material and did not hold the cameras well enough to be (quickly) transported in our “go-box”. Printed in ABS (TitanX) but PETG or even PLA works as well. Screw holes are sized for M3, but could…

Downloads
143
Likes
14
Rating
5
P
PrintablesSkizzleMoney

Thermalright AXP90-X53 Fan Bracket

If you've misplaced the original metal fan clips, or if you want to mount a thicker fan, this bracket is for you. First, attach your fan of choice to the bracket with typical PC fan screws, and then the bracket clips to the cooler in the…

Downloads
142
Likes
12
Rating
0
P
Printablesjufy111

Gridfinity Bambu Lab Lubricant and Thermal Grease Bin

3x1 Gridfinity bin (6u height) to store up to 12 packets of Bambu thermal grease or lead screw lubricant. Designed to be fully stack-able. 6x2 magnet holes in bottom.

Downloads
137
Likes
14
Rating
5
P
Printablesbruhaha

Thermal imager/camera lens cover for Doogee V20 Pro phone

I bought the V20 Pro mainly for the thermal imager and I was surprised the rugged OEM case that comes with the phone doesn't protect the thermal imager lens at all. This clips over the OEM case, doesn't block any buttons and still allows…

Downloads
132
Likes
3
Rating
0
P
PrintablesMaker Baer

Practice Block for Thermal Threaded Inserts M3 - M8

Practice Block for Threaded Heat Inserts M3 - M8 Made for Inserts from Turmberg3D and CNC-Kitchen Printed in whatever material you will place inserts in 0.2mm Layer hight 4 Walls 15% infill

Downloads
130
Likes
12
Rating
0

MUNBYN ITPP130B Thermal Printer - All-in-One Printer Stand & Label Roll Holder

Integrated docking station for the MUNBYN ITPP130B thermal printer with a built-in label roll support. The printer is held firmly in the base by its original footprint. Key Specifications: Dimensions: 239×190×102 mm. Compatibility:…

Downloads
129
Likes
14
Rating
0
P
PrintablesPau Durán

Thermal paste applier

Please leave a like :)

Downloads
128
Likes
10
Rating
5
P
PrintablesAdafruit

Thermal Imaging Camera

Mini Thermal Camera Build a mini thermal imaging camera with Adafruit PyBadge and MLX90640 IR Thermal Camera breakout. Record and analyze images for revealing the heat in circuits, machines and even humans! Learn Guide:…

Downloads
127
Likes
64
Rating
5
P
PrintablesWhity

TOOLTOP ET693C Thermal Camera Rugged Box

The case is based on my parametric “ Rugged Box ” and is resized to fit the original foam insert of the TOOLTOP ET693C Super IR Thermal Camera (which works great btw.). I just sanded down the edges a bit to fit better into the case and…

Downloads
126
Likes
16
Rating
0
P
Printablesmcbeenb

Thermaltake Tower 900 Grommet Bulkhead Insert

While this is registered a s a remix, it is actually a completely new set of models with STEP files included. There are two versions. The threaded version is designed for use with standard g 1/4 fittings for water cooling. The three small…

Downloads
125
Likes
4
Rating
5
P
PrintablesMehTechArt

[LED MOD] Arasaka Thermal Katana CyberPunk 2077

! PLEASE NOTE ! This is ONLY the LED MOD for the Arasaka Thermal Katana CyberPunk 2077 , not the entire katana. The model of the entire katana can be found at this link: Arasaka Thermal Katana CyberPunk 2077 Please click if you appreciate…

Downloads
124
Likes
34
Rating
0
P
Printablesmcbeenb

Thermaltake Tower 900 ATX 24-pin Bulkhead Passthrough

Updated to have better socket retention and more solid clip engagement. This is an ATX 24 pin bulkhead pass through for the Thermaltake Tower 900 case. For securing ATX 24 extension cables. The rubber grommets from the Tower 900 case can…

Downloads
124
Likes
8
Rating
0
P
PrintablesMetaFluX

Attachable macro lens for Thermal Master P1 thermal camera

Warning! You are obtaining and performing this project entirely at your own risk; ZnSe (zinc selenide) is a toxic material that poses serious health hazards through inhalation, ingestion, or skin contact, and the project creator assumes…

Downloads
123
Likes
22
Rating
0
P
Printablesalexw

Improved: Macro-Lens Adapter for Thermal Master Thor 002

This is a macro lens holder for the Thermal Master Thor 002 handheld thermal camera, designed for a 20mm ZnSe laser focusing lens, mine with a 2" focal length. With this lens in place, items 2" in front of it will be focused. Remixed with…

Downloads
117
Likes
12
Rating
5
P
PrintablesMeAndMyPenguin

Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter | Offset for Formd T1 V2.1

UPDATED 1/12/2026 - Included bracket for the MSI B850 Edge TI board (uses coarse fan screws) UPDATED 1/11/2026 - STL file updated to 5.5mm offset instead of 3mm downward - Fusion file updated to have parametric adjustment for vertical and…

Downloads
117
Likes
9
Rating
0
P
PrintablesMaccerHarry

Thermal Master P3 Holder

Simple Holder for my P3 on the workbench https://de.aliexpress.com/item/1005008551629350.html?spm=a2g0o.order_list.order_list_main.5.2b341802QMb4o6&gatewayAdapt=glo2deu

Downloads
116
Likes
8
Rating
5
P
PrintablesNUFF

Thermalright 2011 mounting bracket.

Thermalright Peerless Assassin 120 mount for LGA 2011. Printed in PLA+ so results may vary. 50% infill (a few grams different than 10%) I'm using a Xeon E5 2630-V4 that I know doesn't get hot with this cooler. Is there a valid reason for…

Downloads
116
Likes
10
Rating
0
P
PrintablesWhity

TOOLTOP ET693C Thermal Camera Protection Cover

Protection cover for my TOOLTOP ET693C Super IR Thermal Camera . It's highly recommended to use a filament which is a little flexible and has very good layer adhesion. PCTG (not PETG) works very well, but PETG may is fine too, as PCTG is…

Downloads
115
Likes
9
Rating
5
P
Printablesmcbeenb

Thermaltake Tower 900 ATX 8-pin Bulkhead Passthrough

This is a grommet insert giving you a bulkhead that will accept two 8-pin ATX power connectors. Either EPS/CPU or PCIe are compatible. This secures the cable and gives it a very clean look. The design allows you to run extensions from…

Downloads
115
Likes
6
Rating
0
P
PrintablesmozWORLD

Bambu Lab Thermal Grease Squeezer

This will work with default settings, but if you want it tighter, turn down elephant foot compensation. I set mine to 0 and it was very tight but I managed to squeeze it through.

Downloads
115
Likes
29
Rating
5