Search results: tilt

Sort order

1,316 models

P
Printablesjcjames_13009

Festool TS55 anti-tilt stops

This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…

Downloads
2,152
Likes
367
Rating
5
P
PrintablesOzzy The Artist

Phone Holder, smooth tilt Apple REMIX

I printed this model but found the two bottom supports the phone actually rests on were too far apart for iPhones. So, I slightly modified these supports to better hold iPhones. Please see additional print info. in the included PDF Please…

Downloads
735
Likes
79
Rating
5
P
PrintablesOzzy The Artist

USA Phone Holder, smooth tilt REMIX

I am doing a series of remixes of this model; this is my US flag version Please see additional print info. in the included PDF Please post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D Please hit…

Downloads
578
Likes
46
Rating
5
P
PrintableseCrowne

Wall mount compatible with LEGO(r) car models (tilted for viewing), with proper stud sizes that fit snugly

Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…

Downloads
375
Likes
60
Rating
0
P
PrintablesOuwekaas

Yaesu FTX-1 Field Tilt Stand (37°)

This is a custom 37° tilt stand designed for the Yaesu FTX-1 Field . The stand is only compatible when the SPG-1 Carrying Protector is mounted. The stand is 3D-printed in Prusament PETG Matte Black using a 0.4 mm nozzle. Print settings…

Downloads
341
Likes
20
Rating
5
P
PrintablesBlu3.Berry

AKAI MPC ONE+ tilt stand and battery mount

This is an AKAI MPC ONE+ non-destructive mobility mod. To attach the stand to the drum machine I used the same screw holes that were used to attach the factory rubber feet. I didn't want to glue the factory feet to the printed stand, so I…

Downloads
319
Likes
21
Rating
5
P
PrintablesJellyTitan

Ergonomic keyboard wrist rest tilt adjustment

Gel heart-shaped shaped wrist rests are often used with split ergonomic keyboards because they are accessible and relatively inexpensive. This print wraps around the gel rest and allows for tilt and height adjustment using M6 screws and…

Downloads
318
Likes
86
Rating
5
P
PrintablesDr.Enchanted

Arris Explorer E280 7” drone Rear Back Up Camera with Servo Tilt V2 Available

Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…

Downloads
106
Likes
13
Rating
0
P
PrintablesmoWerk

Modern Coffee Knock Box | spill free & tilt proof design

The classic italian knock box, re imagined for FDM printing and upgraded with features! Rod-less design for very easy and super sturdy print High rim prevents spill while knocking Wide socket for secure stand without tilting Removable TPU…

Downloads
93
Likes
14
Rating
5
P
PrintablesEto2

Tilt adapter M42 to Lmount

This is an adapter for attaching M42 mount lenses to L mount (Panasonic, Sigma, Leica mirrorless single-lens cameras). It has a tilt mechanism that tilts the lens by about 10 degrees. Applying a thin layer of grease to the threaded and…

Downloads
73
Likes
13
Rating
5
P
Printablesgeokscott

THIRDREALITY Zigbee Temperature/Humidity/Vibration/Garage Door Tilt Sensors - Holder

THIRDREALITY has several sensors that are all 2.2" x 2.2" x 0.48" I have several of these THIRDREALITY Zigbee Temperature and Humidity Sensor Lite's and needed a way to mount them without permanently sticking them to a surface. So I made…

Downloads
60
Likes
5
Rating
5
P
Printablesrrro

Tilt-in 30x30 T-nut with metal insert / vkládací matice do 30x30 T-profilu, s kovovou podložkou

CZ (EN version follows): Potřeboval jsem připevnit výztuhu k rámu své tiskárny. Běžně dostupné tištěné T-nut (asi tyto ) se lámaly, kupovat čtyři matky přes internet se mi nechtělo a v železářství se jen tak nedostanou. Inspirován…

Downloads
50
Likes
10
Rating
0
P
PrintablesBrian Chu

GS75 Lifter for better cooling and tilted keyboard

A easy model I created to lift my MSI GS75 for better cooling and typing experience, it's designed to have a slightly tight fitting so it won't easily fall out. Print instructions Because of the high temperature it might have to handle,…

Downloads
41
Likes
4
Rating
0
P
Printablesedi meier

Tilted Stand (Elevated)

Remix of the original model by MartinD, optimized for remote monitoring of my Prusa MK4 printer using a TP-Link Tapo C210 camera. The model needs to be printed with supports due to the cable guide and the bayonet mount.

Downloads
33
Likes
2
Rating
0
P
PrintablesRockyDog271

Tilting 10.2" Monitor Holder

https://www.amazon.com/wisecoco-No-Cable-Needed-Dual-Speaker-Touchscreen-Drive-Free/dp/B0C7BYHN5C/ref=sxin_14_sbv_search_btf?content-id=amzn1.sym.6ca944f8-539c-499e-a3a4-26a566d1de59%3Aamzn1.sym.6ca944f8-539c-499e-a3a4-26a566d1de59&crid=2F…

Downloads
33
Likes
8
Rating
0
P
Printablesshaakunthala

Corner mounts for Philips Hue Motion Sensor (indoor) with downward tilt

Needed a motion sensor mount for my stairwell, so I made one. I know there are few corner mounts already available, but I did not find one with tilt. Therefore I decided to create one from the scratch. There are two variants of the model,…

Downloads
22
Likes
2
Rating
0
P
PrintablesPomi

Stopper for a tilting shoe rack (Sconto).

Printed using PLA with 4 perimeters. Use superglue to bond the plate and the pin.

Downloads
12
Likes
8
Rating
0
P
PrintablesNikolai Schauer

Multimaterial 2 DOF Hinged Pan Tilt Platform

Here I'm showing off the result of my thesis which confirms the feasibility of fabricating compliant mechanisms that flex vertically with multi-material FDM 3D printing. This print is intended to be printed on multi-material printers like…

Downloads
12
Likes
5
Rating
0
P
PrintablesES-Alexander

Tilt-able Camera in a 50mm Enclosure

A mounting system for a tilt-able secondary camera on a mini ROV. Can be used for inspecting the bottom of piers and docks, and for looking back at the tether during a dive. I have unfortunately lost the source CAD files, so only have the…

Downloads
11
Likes
5
Rating
0
P
PrintablesSimon Senecký

Tilted stand

I designed this stand that can be used for displaying almost anything. I highly suggest splitting the model in prusa slicer and adding pins.

Downloads
9
Likes
0
Rating
0
P
PrintablesE. Soderberg

Phone Holder, smooth tilt adjustment, prints in place

Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…

Downloads
44,786
Likes
7,234
Rating
4.81
P
PrintablesMatthew_Ghost

TILT PHONE STAND

Compatible with charger . Added arreting screw . Your phone stand will not ever fall again! 🤯 Added support legs for better mobile stability. The gears fit together better, which allows for more comfortable tilting. Smooth design. No…

Downloads
10,418
Likes
1,817
Rating
4.87
P

Utilty Knife MK2

(update) I've added a version with a lanyard hole 3 M3 nuts 1 M3 5mm screw 2 M3 12mm screws I used a Stanley Carbide Blade I recommend using a button head screw for blade retention. Please be carefull with the blades First Step Second Step

Downloads
4,001
Likes
1,856
Rating
4.91
P
Printablessdaendi

Tilt-lift table with fractal vice (100% 3D printed no extra parts required.)

The height of the lift table can be adjusted with the lower wheel, the angle with the middle wheel and the Fractal Vise can be tightened with the upper wheel. Print Settings & Quantity: I printed everything with a layer height of 0.2mm.…

Downloads
2,319
Likes
1,303
Rating
4.89
P
PrintablesJerrari

Gen2 Large Modular Tilt Drawers (LEGACY)

A new generation of the popular Lack Tilt Drawers . The Gen2 Large Modular Tilt Drawers is a part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize…

Downloads
1,874
Likes
454
Rating
4.75
P
PrintablesPeter Martin

Keyboard / Tablet Stand - Adjustable Tilt

KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…

Downloads
1,725
Likes
535
Rating
5
P
PrintablesGurtmail

choc keycap tilter

An adapter that tilts a keycap on a choc switch. There are two files available so far: choc_tilted will tilt the keycap vertically. choc_tilted_rotated will tilt and also rotate the keycap 90 degrees. This is a remix of Kailh Keycap…

Downloads
1,670
Likes
274
Rating
5
P
Printablesordnerino

Tilted Base and Magnetic Dosing Cup for Eureka Mignon

Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at…

Downloads
1,624
Likes
120
Rating
5

FeatherBoard with tilt for GTS 10 XC

Edit: I have now added a version of the baseboard that can also be printed on a 180mm x 180mm print bed. (untested)The disadvantage of this variant is that you cannot get quite as close to the saw blade with the featherboard. There is a…

Downloads
1,507
Likes
636
Rating
5
P
Printablesmaksen

The Tilable Tiltbox for Multiboard

The Tilable Tilt Box , a practical and compact storage solution designed to attach seamlessly to Multiboard system . This box is perfect for organizing and storing small components, keeping your workspace tidy and efficient. NEW: The new…

Downloads
1,494
Likes
588
Rating
5
P
PrintablesSteve Eckerlein

Cheap FPV Gimbal - Pan/Tilt

This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace. The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for…

Downloads
1,491
Likes
284
Rating
4.6
P
PrintablesIndy Wijata

*Updated Wide Model* Detachable Velux Tilt Window Fume/AC/Printer Exhaust | 100mm/4 Inch Duct

Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…

Downloads
1,389
Likes
534
Rating
4
P
Printables?

Tilting Lock for: "Phone Holder, smooth tilt adjustment, prints in place"

A much needed tilt lock for the: Phone Holder, smooth tilt adjustment, prints in place by E. Soderberg Here's a simple addition to the phone holder that allows you to lock it. Just slide it on when you need it. When you're done, switch it…

Downloads
1,327
Likes
162
Rating
4.8
P
Printablesolex

DJI FPV / Caddx Vista / Air Unit pan/tilt gimbal mount for FPV aircraft

This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…

Downloads
1,283
Likes
124
Rating
5
P
Printablespltaylor3

Remix - Stackable Tilt-Out Storage Bins

This is a remix of https://www.prusaprinters.org/prints/54707-stackable-tilt-out-storage-bins I have made three modifications to the original outside box. The inside part is identical to the original model. I've added a hole to hang the…

Downloads
1,281
Likes
288
Rating
5
P
PrintablesDaniel Josvai

Tilted display stand for lightsaber hilt

I've recently finished my screen accurate Graflex lightsaber project. This is one of the two display stands that I designed for the lightsaber. It has a daring kind of organic design with the symbol of the Jedi order on its bottom. It was…

Downloads
1,272
Likes
318
Rating
5
P
Printablessquinn

Rotating Tilting Weighted Vise

A strong clamping vise that is setup with a rotating and tilting ball joint, allowing you to securely hold objects up to 11 cm wide at the perfect angle. The jaw faces are setup to be interchangeable, and the hollow base has a threaded…

Downloads
1,253
Likes
702
Rating
5
P
PrintablesVinors3DLab

45-Degree Tilted Office Pen Holder

Modern and functional desk accessory designed for FDM 3D printing. The 45-degree tilted body and geometric perforated structure provide quick access to writing tools while maintaining a clean, contemporary aesthetic. ☕ Personal &…

Downloads
1,238
Likes
427
Rating
4.75
P
PrintablesactualSIZE

Stackable Tilt-Out Storage Bins

Small parts organizer: tilt-out bin version. A medium sized bin that tilts out of its shell to allow access to small parts. Print instructions I printed in both PLA and PETG. No support needed. Print the two pieces and pop them together.…

Downloads
1,139
Likes
202
Rating
4.92
P
PrintablesGlennovitS 3D

Tilted Desktop Organizer (minimal, modern and colorful storage)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
1,122
Likes
507
Rating
5
P

Utilty Knife

3 M3 nuts 1 M3 4mm screw 2 M3 12mm screws Please be carefull with the blades Check Out MK2

Downloads
1,112
Likes
546
Rating
4.83
P
Printableskieran philpott

Bambu A1 20 Degree Tilt Block For Auto Ejection

Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill

Downloads
1,076
Likes
59
Rating
5
P
PrintablesMilkiman

Eureka Mignon Single Dose Base Tilt

This is a tilted base for the Eureka Mignon Grinder lineup. I only have access to a Eureka Mignon Crono, so can not vouch for the other variations (e.g. Specialita etc.), but as far as I understand, they are all the same dimensions. I was…

Downloads
1,021
Likes
74
Rating
4.88
P
PrintablesBP3D

Low Poly Puppy Dog (Head Tilt)

Low Poly Puppy tilting its head

Downloads
953
Likes
146
Rating
4.57
P
PrintablesTim O'Brien

DJI O4 Pro/Lite Pod Mount: FPV Max-FOV, almost any quad/tilt/ND

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your O4 Pro/Lite camera with TPU in front of the lens for maximum protection but…

Downloads
902
Likes
176
Rating
5
P
PrintablesMustard Rat

Hexagon Tilted Business Card Holder

This business card holder STL model features a sleek and modern hexagon design, with a 45-degree tilt that provides easy access to your cards while keeping them secure. The hexagon pattern adds a touch of visual interest and texture to…

Downloads
885
Likes
97
Rating
4.82
P
PrintablesPeter Martin

MT VICE - ROTATE & TILT MODEL PAINTING VICE

MT VICE - ROTATE & TILT VICE WORKTABLE NOTE UPDATE 12 FEB 2025 : REWORKED BOLT AND SIDE CLAMP SO THERE IS NO LONGER ANY HORIZONTAL MOVEMENT. ( just need to download and print MT VICE 5 - Side Clamp and MT VICE 2 - Main Bolt) 150mm Square…

Downloads
831
Likes
273
Rating
5
P
PrintablesEpik

Mini Pan-Tilt ESP32-CAM

Note: the front piece should have air holes to aid in cooling, but I have not yet had a chance to remix and test. A simple case for the ESP32-CAM that clips to the Adafruit Mini Pan-Tilt Kit ( assembled with servos ). All pieces snap…

Downloads
804
Likes
83
Rating
5
P
PrintablesCory_T24

Elegoo Neptune 4/4 Pro Screw Tilt Calculate adjustment helper

This is a simple guide for adjusting the bed leveling knobs for screw tilt calculated adjustments. The guide sits on top of the knobs and fits around the plastic where the screw comes through. I line up the “spokes” of the printer knob…

Downloads
785
Likes
122
Rating
5
P
PrintablesGEGCC3D

Hermit Crab Tilt-A-Whirl

It's a simple tilt-a-whirl, merry-go-round, or wheel for your pet to run on. I kept seeing these on Etsy and decided to design my own. To cut down on non-3D printed parts, I did not use bearings, but it still spins very well. For the…

Downloads
777
Likes
123
Rating
5
P
Printablesdesignx-lab.com

Tilted Pen & Sticky Note Holder - designx-lab.com

Tilted Pen and Sticky Note Holder Keep your desk organized and stylish with this 3D-printed Slanted Pen and Sticky Note Holder. Featuring a minimalist design, it combines a slanted pen cup and a holder for sticky notes, perfect for any…

Downloads
713
Likes
205
Rating
5
P
Printablesrorys3D

Tiltable VESA mount - 100x100

A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…

Downloads
712
Likes
147
Rating
5
P
PrintablesMajorOCD

Phone Holder, smooth tilt adjustment (Lock Fix)

This is a remix of https://www.printables.com/model/176417-phone-holder-smooth-tilt-adjustment-prints-in-plac I solved the problem of it not staying in place by adding a locking mechanism. You pull the adjustment knob out to adjust it and…

Downloads
682
Likes
60
Rating
5
P
PrintablesORM

Gravitrax tilted spacer blocks

Here are two different spacers with 9.5° and 4.75° inclination for Gravitrax marble tracks. For the 9.5° sloped spacer block, the top track entry is 10mm higher than the bottom track entry. For the second spacer block with 4.75°…

Downloads
669
Likes
70
Rating
4.64
P
PrintablesAntti Mattila

BMW iX - iPhone MagSafe Mount (tilted)

Wireless MagSafe mount for an iPhone in a BMW iX. It is inserted into the original phone mount in the center console.

Downloads
657
Likes
21
Rating
5
P
Printablesoomaxoo7

Razor Blade / Utilty Knife with heat-set insert

I redesigned the knife so that a Voron-sized M3 heat-set insert fits correctly ( diameter: 5 mm, length: 4 mm ). The hole diameter in the CAD model is 4.7 mm. The new design is extremely rigid, and the blade can be replaced as often as…

Downloads
654
Likes
357
Rating
4.75
P
PrintablesKarol T

Qidi plus 4 - Display tilt adapter (20deg)

Adapter to increase the display angle by 20deg

Downloads
646
Likes
94
Rating
4.9
P
PrintablesMaxim7745

Self-Reseting Tilting Bucket Mouse Trap with Magnetic Release

This is a tilting style mousetrap with an adjustable magnetic release for a snap action. The counterbalance weight is also adjustable. I designed it to work with pennies, but the two threaded plugs can sandwich any type of mass and allow…

Downloads
643
Likes
81
Rating
4.83
P
PrintablesDiablo

K1 Max/K1/K1c screen tilt. Screen cover compatible

If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…

Downloads
643
Likes
120
Rating
5
P
PrintablesBass.Boi

Heavy Duty Pan&Tilt FPV for TowerPro MG90S 180deg metal servo

All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…

Downloads
616
Likes
51
Rating
5
P
Printableswerz 99

ESP32 Cam Pan and Tilt Camera

Case for ESP32 Cam Pan and Tilt Camera with Servo control. As you can see the rounded shape of the part case_cam_xl_+_support_tiltl.stl is not printed very pretty, so it might be helpful to add support. Detailed Description and Code:…

Downloads
586
Likes
52
Rating
0
P
PrintablesMe

Eufy Indoor Pan & Tilt camera mounting bracket

OpenSCAD file included in case it is useful

Downloads
584
Likes
64
Rating
5
P
PrintablesPavel

IKEA SKADIS bits holder tilted / držák bitů nakloněný

Two holders for various bits. Tilted by 30 degrees, so holders can be located close one above another. holes closer to board are deeper and are for longer bits. Print with 2-3 perimeters, 0.4 or 0.6 nozzle, 15% infill, 0.2 layer, but…

Downloads
584
Likes
78
Rating
4.67
P
PrintablesBigDaddyFrye

RA2 PRO TILT MECHANISM

Updated base plate to 12mm tall to accommodate the length of the 3mm bolt used. Updated rotating attachment slots so its tighter on the 4mm bolt and also put in pockets for 3mm nuts on back side of mounting attachment.

Downloads
579
Likes
42
Rating
5
P
PrintablesNigie

K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents)

This is a refined tilt open support, with a strengthed and angled glass lip and designed to fit K1 Max Glass Lid Raiser

Downloads
572
Likes
61
Rating
4.9
P
Printablessquinn

Rotating, Tilting, and Weighted Vise (Sand Filled)

I was thinking about picking up a Panavise to help with some of my soldering and other project work, and then decided to try to model out something that could be 3D printed instead. My goals were to create a vise that felt nice and smooth…

Downloads
570
Likes
272
Rating
4.8

Tilted Guitar Amp Stand

A simple stand for guitar amps or similar. The cross brace provides some extra stability, but you can also use it without. When using the cross brace, you will get 200mm spacing between the two feet. This will result in 300mm width for…

Downloads
570
Likes
101
Rating
5
P
Printablesrorys3D

Tiltable VESA mount - 75x75

A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office or perhaps for public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…

Downloads
560
Likes
132
Rating
5
P
PrintablesRCWeinstadt

Anycubic Photon Mono tiltet build plate

This is an adapter to tilt the build plate after the print to let trop off uncured resin. The V2 you can find here .

Downloads
553
Likes
61
Rating
4.82
P
PrintablesMeister Edel

Sonos Era 100 Wall Mount (tiltable and rotatable)

Here I designed a Wall mount for the new Sonos Era 100 speaker. It is able to tilt it downwards and you can rotate it freely. There are 2 channels for the cable. Screw the Holder with 2 x M4,5 Wood screws to the wall, then mount the…

Downloads
540
Likes
58
Rating
5
P
Printableswhomst

Canon RF to EF mount Tilt Shift adapter

This is a fully printed canon RF body to EF lens Tilt adapter. It allows you to create the “tilt shift” effect with any EF lens. It will also work with any EF body to other lens adapters, I've personally used Nikon F mount, Olympus OM…

Downloads
527
Likes
127
Rating
4.67
P
PrintablesMartin Lexa

LACK stilt

This is a simple attachment you can screw on the legs of your LACK table from IKEA to make the table higher. Choose from one of prepared sizes: 50, 100 and 150 mm. Can be printed both standing up or laying on a side. Hole in the middle to…

Downloads
526
Likes
82
Rating
5
P
PrintablesTim O'Brien

Original V1: DJI Action 2 TPU Quad Mounts: Any Drone, Any Tilt, Any ND

New Redesigned Version! Just finished this new version, the Max FOV V3 Redesign , go check it out! I'll be leaving this version available too. A bolt-down TPU mount/case for your Action 2 cam Update: Tested and fit with multiple different…

Downloads
516
Likes
40
Rating
5
P
PrintablesMaverick Ng

Voron 2.4 7" inch tilt touch screen

Mod for raspberry 7" inch tilt touch screen

Downloads
510
Likes
64
Rating
4.5
P
PrintablesBrent V

Flashforge AD5X Adjustable tilt mount

My AD5X towers above me at my desk, because the default orientation points up, its impossible to see the screen when sitting, and even standing is at an angle away from me. This mount allows me to position it slightly down so I can see…

Downloads
508
Likes
112
Rating
4
P
PrintablesJarda T

Ender 3 - Spool Holder Adapter for DD - tilted

This is an adapter for the original Ender 3 (possibly other Creality printers aswell) spool holder arm, that is rotated by 90deg so the filament is pointing to the front of the printer for Direct Drive. It is also tilted backwards by…

Downloads
505
Likes
57
Rating
5
P
PrintablesNasik

Tilt Box Bathroom Organizer

A clean and modern bathroom organizer with a smooth tilt-open mechanism and a minimalist ribbed design. Perfect for storing cotton swabs, cosmetic pads, small accessories, or other bathroom essentials while keeping everything neatly…

Downloads
494
Likes
224
Rating
4
P
PrintablesOmega

Slim sheath and alternate scales for Utilty Knife MK2

I wanted a slim sheath for Tea Break Gaming's Utilty Knife MK2. My own testing proves them to be quite secure. If you want a tighter "fit" you can use heat to gently bend the retention tab at the back of the sheath, tune it to desired…

Downloads
490
Likes
201
Rating
5
P
PrintablesJerrari

(LEGACY) Lack Tilt Drawers

Check out the new Gen2 Models HERE What!?… You had extra screws after assembling your printer! Hurry, you need a place to hide them! These little tilt drawers allow for quick easy access and are great for storing your knickknacks on your…

Downloads
487
Likes
211
Rating
4.8
P
Printablescmos

Eufy Indoor Cam 2K Pan&Tilt - Mounting Plate

Unfortunately, there is just one of these mounting plates in the box. So if you want to use the cam in different locations just print a couple of more mounting plates! no supports required - no rafts required.

Downloads
487
Likes
41
Rating
5
P

Detergent TiltMake Drainer

A simple, no-frills 3D-printed stand that holds laundry detergent bottles at an angle to reduce waste—easy to design, fast to print, and solves a common everyday problem with minimal material.

Downloads
485
Likes
190
Rating
5
P
PrintablesShmoee

Peafowl / Peacock (model tilted and split to minimize support)

I remixed the peacock here to try to make it easier to FDM print: https://www.thingiverse.com/thing:182242 I looked at how Cura was adding support with a 70% overhang and I saw that tilting the model about 10 degrees backwards would…

Downloads
480
Likes
38
Rating
5
P
PrintablesTim O'Brien

GoPro 11 Mini Drone Mount: Any Drone, Any Tilt, Any ND

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your GoPro Hero Mini 11 camera with the best mount in FPV! Max protection with TPU…

Downloads
478
Likes
129
Rating
5
P
PrintablesKRTac

Voron RockNRoll Mod Stilts

Intended for use with Voron printers that use the awesome RockNRoll mod by RockNLol. This stops the printer from tipping over if the center of mass is a bit higher. Print settings I used the settings recommended in the original mod, so:…

Downloads
478
Likes
103
Rating
4.67
P
PrintablesAMacG

Tilted wall mount for Gridfinity base

Simple wall mounts for mounting with countersunk M4 screws. Base plate is connected to wall mount using M3x12 mm (may be longer) into M3x4x3 inserts. Two variants are provided: Wall mounts with only one insert for the left and right end,…

Downloads
474
Likes
119
Rating
5

Tilting router lift

A heated insert version of http://www.thingiverse.com/thing:3166165 Hardware: ** if making the main body in 2 parts you will need 2 m6 by 25 cap head screws for attaching the top to the bottom body sections * M10 threaded rod for the main…

Downloads
465
Likes
134
Rating
4
P
PrintablesSamo

K1 Max tilt open lid support

Since I got my K1 Max I have had to seek for a place to put its lid for many times. I was always afraid it will topple or fall and shatter so needed a solution for this. First I got the holder to store the lid and print beds at the side…

Downloads
456
Likes
46
Rating
5
P
PrintablesRod

Pan & Tilt Camera Mount

This is a pan and tilt tripod mount for any camera with a 1/4" screw thread. There are two tripod adapters for either a 1/4" or 3/8". The pictured model was printed with an MMU to colorize the graduation lines and numbers on the tripod…

Downloads
455
Likes
82
Rating
5
P
Printablessomeoneonly

Secretlab chair tilt lever

Secretlab chair tilt handle replacement cause the original one wears out easily. 15 bucks is way too much for a flawed handle ._. Category: Office

Downloads
448
Likes
14
Rating
0
P
Printablessolarahawk

Tilton-style Pedal Faces for VRS DirectForce Pro

These are upgraded faces for the VRS DirectForce Pro sim racing pedals, based on the real-world racing Tilton pedals. These have been designed to fit on top of the original VRS face plates and to replace or use the original mounting screw…

Downloads
448
Likes
35
Rating
5
P
PrintablesRobbycor

Fenster / Tür Kippstopper Window/Door tilt stopper

Verhindert das zu und Aufschlagen von Fenstern oder Türen, die in Kipp Position stehen. Am Wochenende war der Wind so ungünstig, dass meine Terrassentüer, die auf Kipp stand immer auf und zu geschlagen hat. Darum habe ich diesen…

Downloads
448
Likes
51
Rating
5
P
PrintablesSteve

Blink Mini Pan Tilt Camera Wall Mount

Wall mount for the Blink Mini Pan-Tilt Camera. This can be mounted to the wall with either Command Strips or screws. Cutouts on the sides and bottom allow for the power cord to be routed in any direction. I added a hole underneath the…

Downloads
440
Likes
59
Rating
5
P
PrintablesPavel

IKEA SKADIS drill bits holder tilted / držák na vrtáky nakloněný

Tilted holders for various drill bits - the one with more holes can hold up to 10mm drill bit, the other one up to 15mm drillbit Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports…

Downloads
439
Likes
47
Rating
5
P
Printablestcatca

Festool TS55 anti-tilt stops (improved)

I modify the version also found owhich does not fit to my festool TS55 REBQ bought in 2019. The left side was correct , but the right side the 6mm hole was incorrect ( 1mm shift). I also improve a border, to be more easily removable, when…

Downloads
438
Likes
62
Rating
4
P
PrintablesAndras

Mammotion Yuka Mini front wheel tilt

If you are tired of hearing the front wheel lift all the time. Take out the front wheel with 3 bolts and put this 3D model on the axle so it can't slip out. It will work flawlessly!

Downloads
435
Likes
26
Rating
5
P
Printableschylld

Sunlu S4 anti-tilt spool cradle

Two nights in a row, I woke up to my printer printing in mid-air 😪 Both times, the cause was a near-empty spool tilting on the Sunlu S4 rollers, causing a tangle up against one side of the spool. Here is my solution: a 2-piece cradle that…

Downloads
422
Likes
113
Rating
5
P
Printableshorza

Snapmaker U1 Touchscreen Tilt Mount

Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…

Downloads
410
Likes
165
Rating
4.5
P
PrintablesWiredEarp

Air65/Air75 canopy tilt extension

This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…

Downloads
409
Likes
43
Rating
5
P
PrintablesChristof

Tiltable target

Little target (good to be used with nerf dart). Hitted ring make those externals ones fall too. Petite cible (utilisable avec des nerfs. Quand un anneaux est touché, il fait tomber ceux plus extérieurs. Category: Mechanical Toys

Downloads
408
Likes
65
Rating
4.67
P
PrintablesJKSniper

Tilted Adapter for Noctua UPGRADE Fan + 2x Fan Cover

Hello! This is TILTED ADAPTER for Nocuta (or other 40x40x10) fan AND matching Fan Covers! This tilted adapter has 4 benefits: Noctua Fan is REALLY quiet and reliable! You should upgrade! Fan is pumping cooler air (instead of warm from the…

Downloads
407
Likes
40
Rating
5