Search results: tru

Sort order

18,036 models

P
PrintablesJRT3D

Recreator 3D MK5Kit Ender3 Pultrusion Unit

Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant

Downloads
23,494
Likes
2,360
Rating
4.77
P
PrintablesKagarov

Orbital. Structural printing. Print-In-Place lamp

Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…

Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant

Downloads
22,303
Likes
6,562
Rating
4.91
P
PrintablesReferentiel

Keyboard storage structure

! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…

Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant

Downloads
7,256
Likes
4,310
Rating
4.91
P
Printablesfuchsr

Super PINDA (SPINDA, S.P.I.N.D.A) Height Adjustment Tool, mounts into 3030 extrusion

Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
4,931
Likes
992
Rating
4.88
P
PrintablesReferentiel

Mouse storage structure

! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…

Print approx. €10.96–€13.40 excl. taxPreliminary estimate for one variant

Downloads
4,734
Likes
3,172
Rating
4.9
P
PrintablesRossero

Single Extruder - TRIPLE Color - Sleepy Cat

(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
4,715
Likes
2,487
Rating
4.91
P
PrintablesPetclaud

NEMA (extruder) motor rotation indicator

I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
4,713
Likes
606
Rating
4.85
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Fox

Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
4,430
Likes
1,457
Rating
4.93
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ X-Axis Linear Rail Guide Upgrade - updated (Bondtech Extruder) / MK3S+ Tensioner

THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,252
Likes
630
Rating
4.98
P
PrintablesPrism08

Mercedes UNIMOG U5023 Cabin / Body (RC CAR / RC TRUCK) 1/10 scale

November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
2,726
Likes
416
Rating
5
P
PrintablesM4NU

Dual Tensegrity - Connected Structures

These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant

Downloads
2,444
Likes
421
Rating
5
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,995
Likes
158
Rating
4.92
P
PrintablesLegufix

MK4 Nextruder nozzle change tool

Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,958
Likes
372
Rating
4.94
P
Printablestarajdactyl

Hot Wheels Monster truck ramp

A remix of a hot wheels car ramp extending it to fit 1/64 scale monster trucks! (hot wheels or monster jam). accepts two standard hot wheels track connectors to help line up monster trucks for the big jump! print oriented with the Xes on…

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant

Downloads
1,467
Likes
242
Rating
5
P
PrintablesP-atix

Off-Road Semi Truck

Off-Road Semi Truck Based on Fiat 65PC truck (1975) The truck has functional suspension and a proper wheels for overcoming obstacles. Every part has been adjusted for smooth supportless printing. Keep the orientation of the parts as shown…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
1,432
Likes
495
Rating
5
P
PrintablesJeepingJohnny

Extruder Gyroscope, Print in place with press fit magnets.

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
1,360
Likes
336
Rating
4.97
P
PrintablesClifmeister

8020 Extrusion - Cable clip

I mostly print this on 0.25 draft in prusa slicer. No infill to make the clip more bendable. Just push the sides together and push in the extrusion. Then click the inner towards the extrusion to make the click. Perfect for cable…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
1,299
Likes
135
Rating
5
P
PrintablesTelles0808

Da Vinci's Vitruvian Man

The 3D-printed Vitruvian Man brings Leonardo da Vinci’s famous drawing into a new dimension. This version transforms the two-dimensional study of human proportions into a bumped display, capturing and merging classical art with modern 3D…

Print approx. €6.21–€7.59 excl. taxPreliminary estimate for one variant

Downloads
1,274
Likes
327
Rating
0

Bridge Strength (Truss)

Students will create a 3D printed bridge using different shapes for structural support. Then we apply weight to them. Whoevers bridge is the strongest will win the competition.

Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant

Downloads
1,237
Likes
120
Rating
5
P
PrintablesBK

Wind Turbine Extruder Indicator

This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,049
Likes
189
Rating
4.97
P
Printablesfunction.3d

Desk lamp with an orbital design, mood lighting, and bridge structure

Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant

Downloads
974
Likes
219
Rating
4
P
PrintablesJohnM

Prusa i3 Mk3 reverse Bowden extruder PTFE connector

This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
957
Likes
115
Rating
5
P
PrintablesNils Kal

MK3 (s+) Stealthburner V0.5 - compatible with MK3s+ Extruder

MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
831
Likes
389
Rating
4.85
P
Printablesbr4in

ExtrusionAl Covers for 3030 T-Slots

This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…

Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant

Downloads
817
Likes
142
Rating
4.96
P
PrintablesPetclaud

Prusa i3 MK3S Noctua Extruder fan cover

The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
679
Likes
78
Rating
4.63
P
Printablesmarty_shitless

Headgear Helmet Construction for vvk187 Lego Man Toilet Paper Holder

Construction Helmet for Lego Toilet Paper Holder Man by vvk187 - https://www.thingiverse.com/thing:1996077 Fits the NEWER version of Lego Man The Helmet is based on https://www.bricklink.com/v2/catalog/catalogitem.page?P=3833#T=C

Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant

Downloads
667
Likes
127
Rating
4.75
P
PrintablesRobertusMaximus

Building Under Construction

Building Under Construction Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new. These models will help you do…

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant

Downloads
596
Likes
158
Rating
0
P
PrintablesJorge

PRUSA Nextruder thumb Hexagonal Key with TORQUE LIMITER

Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
588
Likes
248
Rating
4.75
P
PrintablesRepkord

MK4/MK3.9 printable parts 3MF Layouts for MK4 IS Structural Profile

MK4 / Mk3.9 Upgrade parts but laid out on MK4 with Input Slicing 0.4mm nozzle PETG. Prints 40% faster at the same quality. Original MK3 version takes 2,384 minutes (39.7 print hours) per set. This version takes only 1,434 minutes (23.9…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
547
Likes
46
Rating
5
P
PrintablesRobertusMaximus

Building Under Construction - Cargo - Part 3

Building Under Construction - Cargo - Part 3 Cargo to make your construction site look in use. Ladders to climb to the next floor, control panels, safety fencing, barrels, and more. To add a Diesel Generator to the construction site:…

Print approx. €6.25–€7.64 excl. taxPreliminary estimate for one variant

Downloads
546
Likes
120
Rating
0
P
Printablesdanny520

Print in Place USPS Mail Truck Grumman LLV

Grumman LLV (long life vehicle) I've finally figured out how to model the interior so it doesn't need supports. I plan to revise my other previous models to make them easier to print. This print doesn't take too long or use too much…

Print approx. €12.69–€15.51 excl. taxPreliminary estimate for one variant

Downloads
521
Likes
75
Rating
5
P
PrintablesSB

H0 Scale Jersey Concrete Barrier – Modular Road & Construction Barrier for Model Railways

The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
434
Likes
48
Rating
5
P
PrintablesJoe Paradise

Single Extruder - Tri Color - Unicorn

Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
420
Likes
129
Rating
5
P
PrintablesRockatilly

loading ramps Bruder MB Arocs Construction truck

ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
392
Likes
37
Rating
5
P
PrintablesRo3Deee

Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)

As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
380
Likes
53
Rating
4.75
P
PrintablesAinon3Dtisk

Xenomorph, Alien, Intruder

Hello, Welcome to my profile, full of models and miniatures :-) I have Xenomorph figures for you. They are quite nice and print well. I used Bambulab PLA Basic as the material. It prints really well. It is better to use supports! If you…

Print approx. €10.69–€13.06 excl. taxPreliminary estimate for one variant

Downloads
377
Likes
63
Rating
0

2020 Aluminum Extrusion Drill Guide

This is a guide for drilling holes in 2020 aluminum extrusion. It has holes at 10mm intervals from 10mm to 100mm. It is useful primarily as a layout and marking tool, obviously PETG is not going to keep a steel drill bit from wandering.…

Print approx. €3.37–€4.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
372
Likes
75
Rating
5
P
PrintablesS8r1s

Citrus juicer

This Citrus juicer will allow you to enjoy your morning routine citrus drinks or squeeze citrus fruits with easy and leaving your workplace clean. Features: Easy to clean No cup required Allows you to pick out seeds Easy pour into any…

Print approx. €7.00–€8.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
351
Likes
28
Rating
4.5
P
PrintablesHammerTech3D

PLA Temp Tower - Prusa Core One / Core One + | Balanced / Speed / Structural (195°C - 235°C)

PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
346
Likes
14
Rating
5
P
PrintablesRay Fox

57 Chevy Truck with working parts

Printed on both my MK4 nozzle 0.4 (with latest firmware and PS software) and my MK3S+ with 0.6 nozzle. Print the Chassis first. Put supports under the ends for the wheels. The holes for the axles have been enlarged to allow for a 5 mm…

Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant

Downloads
343
Likes
51
Rating
0
P
PrintablesZeroCircle

Nextruder nozzle wrench to fit IBNobodys heatblock clamp.

I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
56
Rating
4.95
P
Printablesx3Design

Orbital. Structural printing. For PRUSA MINI !

The excellent model from user "Kagarov" ( https://www.printables.com/model/41007-orbital-structural-printing-print-in-place-lamp ) now available for the proud owners of the PRUSA MINI !!! Its about 92% the size of the original. However a…

Print approx. €6.29–€7.69 excl. taxPreliminary estimate for one variant

Downloads
308
Likes
62
Rating
4.8
P
PrintablesMartin v R

Ikea Utrusta (and Blum Inserta) hinge template

This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
275
Likes
19
Rating
5

CM3D Extrusor MINI + FS

This extruder use a dual gear drive and you will be able to integrate the FS in the extruder body, similar to the IFS extruder. We have added three variants for PC4-M6, M8 and M10. The filament path is now cleaner than in the VERTEX…

Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
274
Likes
99
Rating
4.6
P
Printablesjohny haky

citrus juicer

Juicer for orange or other citrus.

Print approx. €3.31–€4.05 excl. taxPreliminary estimate for one variant

Downloads
270
Likes
31
Rating
5
P
PrintablesfreakyDude

Sidewinder X2 Extruder Lever Brace with ADXL345 bracket

I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
270
Likes
36
Rating
5
P
PrintablesMark

ZX Murmulator HDMI & VGA case for Spectrum Emulator

These are cases for the VGA or HDMI version of the ZX Murmulator ZX Spectrum emulator PCB. I made it from a generic case design imported into TinkerCad and very extensively modified by scaleing and adding components and cutouts to fit the…

Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant

Downloads
270
Likes
5
Rating
0
P
Printablespyxlz

Fruit/Citrus Juicer

You can screw this on the top of a PET bottle and when you use it, the juice will flow right into the bottle. fits PCO1881 type bottles (like diet coke). Settings: any filament should work, but PETG, or another foodsafe and strong-ish…

Print approx. €8.49–€10.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
261
Likes
99
Rating
0
P
PrintablesJLTX

Easy MMU3 Purge Calibration Tool for MK4 and other Nextruder models

This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
258
Likes
98
Rating
5
P
PrintablesIK3D

Squid Citrus Juicer

Just a hilarious juicer in the form of a Calamari, I hope you like it! You can print this with food safe materials, paint it with food safe epoxy, etc. Or just give it away as a joke! Easy and quick print in about 2-3 hours. Lay it on…

Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
74
Rating
5
P
Printablessickopsycho

Car Cup Phone Holder (instrument holder)

I was sick of buying crap phone holders on Amazon that only lasted a couple of weeks. I decided to make my own. The iPhone 12 with a case fits perfectly in the stand, you can even charge while your using it. Wireless charging may be to…

Print approx. €8.41–€10.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
243
Likes
36
Rating
5
P
PrintablesUko

Fancy Citrus Juicer

I liked the original design of Juicer - citrus reamer by milangladis In this remix I made a couple of important improvements: flattened the base because there is no way to nicely print such a shallow curve on FDM machines. hollowed out…

Print approx. €7.48–€9.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
242
Likes
27
Rating
5
P
PrintablesRPK

Honeycomb structure remix

Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…

Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant

Downloads
241
Likes
17
Rating
0
P
Printablesskypy

Tiny Distance Tower Test - Retraction / Extrusion / Bridge ..

Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
239
Likes
9
Rating
5
P
Printablesdavemoneysign

Defender Construction Toy

This is a simple, Defender style car toy that allows the user to use a simple wrench to turn nuts and bolts to assemble components. The basic print requires 1 Body, 1 Frame, 4 Rims, 4 Tires, 4 Axle Nuts, 2 Bolts and 1 Wrench. The Bumper…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
228
Likes
97
Rating
5
P
PrintablesBasementLAB

2020 Leveler Pad for Aluminum Extrusions - Stabilizer - with Leveling Mounts M6

2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
223
Likes
69
Rating
0
P
PrintablesJorge

PRUSA Nextruder thumb Hexagonal Key

Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. Although I'm aware that there are several solutions for this purpose, I have chosen another option that will fit into the…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
53
Rating
5
P
PrintablesH.Stephens

Native Instruments Maschine Mikro mk3 Stand

This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…

Print approx. €4.94–€6.04 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
17
Rating
5

I type construction beam

just construction beam i made for my 3D house cutout project use it freely RECOMENDATION USE BRIM !

Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant

Downloads
190
Likes
10
Rating
5
P
Printablesgolem

Mini Kazoo Trumpet

This music instrument was inspired by kazoo. But it was designed with trumpet shape. Sound is generated by peace of plastic sachet. This membrane size is 40 x 40 mm and optimal thicknes about 0.01 mm. Membrane mounting ring should be…

Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
32
Rating
0
P
PrintablesSica

On Air sign, dual color, single extruder

A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
113
Rating
5
P
PrintablesTickTock

Cybertruck Wastebin

Nice use of space in the door. Both the bin and the lid require supports. I highly recommend using PLA for the support and PETG (or ASA) for the body since this leaves a nice finish without any need for sanding or other post-processing.…

Print approx. €5.18–€6.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
176
Likes
20
Rating
5
P
PrintablesP-atix

LLV Service truck

Based on Grumman LLV USPS mail truck. Size 1:18 , Slightly tuned with customized two-liter 4cyl. Turbodiesel. Optimised for easy print with no supports. This toy car has opening doors. NOTE: No supports required. (Case has reinforcements…

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
44
Rating
5
P
PrintablesPeter Main

Nextruder Nozzle Holder / Extruder Identification Label

These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…

Print approx. €3.74–€4.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
163
Likes
59
Rating
4.63
P
PrintablesMatt Boyer

Extrusion Indicator - Tornado

A 2" swirly extrusion indicator with built in filament change (M600 - without a MMU). I recommend Black for the first color, then red, orange, or anything bright. Two 8mm magnets are glued together, then to the back (in a magnet recess).…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
25
Rating
5
P
PrintablesHDT_dŠ

Bruder MAN TGA truck side door hinge

This is the hinge replacement for Bruder truck side doors - MAN TGA41.440.

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
21
Rating
5
P
PrintablesHahihula

Citrus Juicer fits on mason jar

Citrus juicer which can be screwed on a mason jar so the juice drips inside the jar.

Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant

Downloads
153
Likes
29
Rating
0
P
Printablesrahix

I-Type 4040 Extrusion (8mm Slot) Universal Cable Mount

This is a cable mount for I-type 4040 extrusions (8mm slot width) which requires no fastener. Instead, it is inserted into the slot at a 45° angle and then rotated into either horizontal or vertical orientation, where it stays in place on…

Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
153
Likes
25
Rating
5
P
PrintablesGagi

Nissan 200sx Trunk clip

small clip on the sides of the trunk

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
153
Likes
16
Rating
0
P
PrintablesJohnny_X

GeeeTech A30M/A30T Extruders Lowering System

After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
15
Rating
5
P
PrintablesAdam

Tinkertoy Construction Set - Replacement Parts

These models are replacement parts for the Tinkertoy Construction Set . I've designed them using an existing set as a reference. I may be missing a few parts that weren't in my set. Parts included: Rods in 5 sizes. The filename has a…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
141
Likes
19
Rating
4.5
P
Printables3dprints4life

Shelf Bracket Drywall Construction / Konsole - Regalhalter Trockenbauwand 17cm x 17cm

EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…

Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
18
Rating
5
P
PrintablesBoBaCool

Adaptative tracing gauge - Trusquin adaptatif

Created with Sketchup Make and Printed on MK3S+ with PLA Steel rulers 25-30 mm width and 1 mm or more thick can fit. Just add following stuff : One M4 nut, one drop glue One M4 wing screw One M5 compression ressort (+/-20mm) Print tips…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
136
Likes
15
Rating
0
P
Printablesolekhal

Reinforced Sprite Extruder 0 Y Offset and 5015 hotend fan

The general design and fit for the fan I used of @Lasse's version were great. The small gaps I ended up with in the print will not affect performance, as the fan covers them. The right side mounting ear felt a bit weak and easy to brake.…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
13
Rating
0

držák kamery chůvičky TRUELIFE NannyCam V24 PRO

Šroub musí být zmenšen v celkovém měřítku na 99% kvuli vůli závitu.

Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
1
Rating
0
P

Pin that supports the trunk lid of Peugeot 208

Pin that supports the trunk lid of a Peugeot 208. On the picture there is the original part and the printed version.

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
19
Rating
5
P
PrintablesSHR3D.eu

truck kit no.4

[EN] Easy to print truck kit. Truck kit designed for easy printing without supports. To assemble, all you need besides the printed parts is a piece of filament and two M3 screws (4-10 mm long) or screws of the appropriate size. The…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
44
Rating
5
P
PrintablesMike L

Star Wars Imperium Coaster MMU + Single Extruder

Simple coaster with the Star Wars Imperium logo. There's a MMU and a single extruder version with layer change.

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
13
Rating
5
P
PrintablesPeter Farell

Etruscan Bucchero Caryatid Chalice

An Etruscan Chalace probably used for cultic purposes. Dated from 620/10 and 570/60 BC. The inside of the vessel shows a so-called omphalos hence it was used for cultic purposes. Find Spot is unknown.

Print approx. €18.48–€22.59 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
42
Rating
0
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
21
Rating
5
P
PrintablesKageve

Mk4 Nextruder Hotend Assembly Box (MMM option avalible)

A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles. It has a few small features on both short ends to allow it…

Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
26
Rating
4.67
P
PrintablesMrFlippant

Transformers Decepticon Constructicon Devastator Bobblehead

Bobble the head of your favorite Decepticon Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from…

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
28
Rating
0
P
Printablesramity

Nextruder Plotters

Checkout my improved solution! Features No additional hardware needed A G2 pen and filament are all you need. Install and forget Flexibly switch between plotting and 3D printing without removal of the attachment. Tool free design Slide in…

Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
116
Likes
88
Rating
5
P

Chain for playmobil 3318 truck

This is a chain which is part of the container from the 3318 playmobil container truck. There are three different parts. After assambly I melted the chain links so they cannot open anymore. The ready to use Gcodes are for Prusa MK2.5s.

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
16
Rating
0
P
Printableslienmeat

Mount for Spektrum AR631 Receiver

Fits the Spektrum AR631 Receiver, and possibly others. The mount should be printed small-side down, so that the lip that keeps the narrow side of the RX (the side with the antenna) from sliding through faces the bed. Supports are not…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
114
Likes
8
Rating
0
P
PrintablesTroggPrinter

Truncated Icosahedron V2.0 (Hoberman Sphere)

WARNING - CHOKING HAZARD! SMALL PARTS! KEEP AWAY FROM SMALL CHILDREN! INTRODUCTION This is a very satisfying sphere using the Hoberman mechanism. It is a truncated icosahedron, with 12 pentagons (5 sides) and 20 hexagons (6 sides) that…

Print approx. €6.73–€8.23 excl. taxPreliminary estimate for one variant

Downloads
110
Likes
42
Rating
5
P
Printablesdavasny

Citrus peeler (orange, tangerines etc.)

During long and frosty nights, this little piece of plastic will be a lifesaver in a fight against a thick peel of orange. It will help you quickly with peeling those small fruits, so that you will no longer get your hands dirty. Grab the…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
17
Rating
0
P
PrintablesBooks

Straw Truncated Icosahedron Connector

A connector for making a truncated icosahedron out of straws. The two sockets with flat bottoms are 108° from each other and form the outside of one of the solid's 12 pentagons. All pentagon edges are connected via one of these two…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
106
Likes
21
Rating
0
P
PrintablesJonas

Chubby: Relaxed Tensioning Lever for Creality Extruders

Creality single-gear extruders, especially the metal ones, come with a very stiff spring and sometimes can, even on their minimum design (screw all the way loose) and true minimum (cap removed) settings, badly deform softer filament,…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
98
Likes
12
Rating
0
P
PrintablesTristan Jung

Ender 3 V2 X Stop Mount for Microswiss NG Extruders

This is a Simple Mount for the X-Endstop w/ Microswiss NG Extruders, For use with the original screws. The original mounting position doesn't allow the NG Extruder adaptor plate to hit the end stop switch, this simply p rovides a new…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
98
Likes
20
Rating
5
P
PrintablesElyse

Money Box or pencil cup Impossible passthrough - Single Extruder, Dual Color

Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…

Print approx. €7.35–€8.98 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
24
Rating
0
P
PrintablesTahoma Prints

Cup holder adapter for Peterbilt 520 trucks

https://www.paypal.com/donate/?business=C8C56MQUF7KQ4&no_recurring=0&item_name=Thank+you+for+donating%21+It+helps+me+create+new+projects+and+get+supplies+%26+upgrades.%0A¤cy_code=USD This is an adapter I created for Peterbilt 520 style…

Print approx. €5.54–€6.77 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
5
Rating
0
P
PrintablesVorpal

Dacia Duster 2018 parcel shelf/trunk cover cord washers

Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
9
Rating
0
P
PrintablesPrinter4496

Modular Truss Bridge Connector - 3D Printable STEM Project

Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
19
Rating
5
P
PrintablesJochemB

Twistable T-nut for 3030 aluminium extrusions

I wanted to screw some things to the prusa MK3S+ aluminium extrusions, but I didn't want to take the printer apart and realign/calibrate it. So I took a standard t-nut design and modified it in a way that you can insert it through the 8mm…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
17
Rating
5
P
PrintablesBooks

Kanji "Truth" Coin

Coin with the Japanese Kanji for "Truth" engraved in it. Uses art from PublicDomainVectors.org .

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
10
Rating
0
P
PrintablesPeter Farell

Anatoliy Trubin : Benfica Goalkeeper

Anatoliy Trubin : Benfica Goalkeeper In a moment that has immediately entered Champions League lore, Benfica goalkeeper Anatoliy Trubin scored a historic 98th-minute header to secure a 4–2 victory over Real Madrid on January 28, 2026.…

Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
11
Rating
4
P
PrintablesT_K

Prusa MK4, Nextruder nozzle box

I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
10
Rating
5
P
PrintablesBedrnik

Isofix hook for bags in the car trunk

sofix hook for bags in the trunk of your car to prevent things from flying around in the trunk of your car.

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant

Downloads
77
Likes
31
Rating
0
P
PrintablesKat

Structural formula theobromine as LED neon light

Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant

Downloads
77
Likes
34
Rating
0