MK4 Reverse Bowden Adapter to attaches a PC4-M6
This model is a adaptor for fit a PC4 M6 coupler. Print take 12m in 0.15 layer height on a MK4. You can print this without support, I recommend PETG to print it.
- Downloads
- 238
- Likes
- 31
- Rating
- 4.86
346 models
This model is a adaptor for fit a PC4 M6 coupler. Print take 12m in 0.15 layer height on a MK4. You can print this without support, I recommend PETG to print it.
I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…
Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…
Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
My printer just couldn't cope with the original hands for some reason so I took the stl into blender and cut off the included supports and dropped the poly count because blender was having to guess too much. Now I can print these with…
Flexi Gecko from Kris Cyber with the eyes attached for a single print file.
MASE - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. Supports 7 and 9.5mm…
Xbox Controller Stand with attached Masterchief figure. I printed this without supports but did notice a difficult bridge in Masterchief's helmet brim. Remix from thingiverse mastercheif bust: https://www.thingiverse.com/thing:3555805
i liked this model, but i needed to attach his legs
Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…
Holds New Milwaukee Shockwave boxes larger version, can be a bit tight. The idea came from moldel https://www.printables.com/model/125957-milwaukee-shockwave-box-holder Thank you. Reccomended: Print with 3 walls
Updated version which moves the flex fingers into a protected location. With this version the chalk drops in easily and uses the fingers bending in to hold it. With the solid ring on top it is much strong and kids don't break it as quickly.
I frequently move my Prusa Mini and prefer to have it in one piece. Please make sure that your Prusa Mini power supply unit is approximately 166 × 76.5 × 32.5 mm in size; otherwise it would not fit. Printer settings: Material: PETG, ABS,…
This model is a remix of the original onion and garlic basket. I modified the design so the lid can be securely attached with screws instead of just sitting on top. To assemble it, you will need 2× M4x8 heat-set inserts and 2× M4x12 screws.
Voici une attache murale pour cable a visser. Ellle s'utilise avec une bande de velcro de maximum 15mm de large.
Attache cable Peut etre visser ou coller avec du double face. Filament : PLA + Blanc . Pas de supports ,avec jupe et imprimé en 0.2 mm.
I wanted my modded Mini to be as clean as possible but with a possibility to store some frequently needed tools (like hex keys, nozzle wrench and spare nozzles) with it. So I came up with the idea of a glovebox style stowage device…
Standard plant pot with already attached planter plate. Can be also printed separately. Scale the model in Slicer :)
Slip on sling style mount with Pic rail attachments
This part is designed to attach the "Burg Wächter Journal 5867" mailbox to a double rod mat fence. Other Mailboxes may work, too but it's not tested. (All Mailboxes, where the horizontal mounting holes are 6mm wide and 184.5 mm apart…
Mit diesem Aufsatz für den Gravitrax PowerStarter kannst du das Loch, das in den Starter führt, in deine Gravitrax Bahn integrieren. ---------------- With this attachment for the Gravitrax PowerStarter you can integrate the hole that…
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
I needed a new home NAS to replace my old QNAP servers, so I built one using a Raspberry Pi CM4 with a CM4 IO board and SATA PCIe card. NASsie supports 2 '* 2.5-inch drives and 2 '* 3.5-inch drives. The case is completely 3D printed. This…
Pokemon Team Rocket Logo for Attache Case ( Valisette ) Glue that Red thing where you want You can edit the step file ;)
OnShape document link
This was designed for the Monarch Takedown Recurve Bow, but if your bow has an attachment point with holes spaced 34 mm apart, it should also work just fine. You will need (2) #10-24 x 1/2in screws/bolts. IMPORTANT: Printing the part in…
Gridfinity Magnet-Base Screw-Attached Shelf for use on a plywood backed tool wall. Holes sized and countersunk for #8/4mm wood screws.
This is an improved version of a previous model I made. This version allows you to use standard drum rims and tension rods and is printed in PLA. Special thanks to smiley8476@smiley8476_430107 for helping me troubleshoot this design! (…
Revolver Holster for my Ruger LCRx 3inch Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0 The Spine System has Loops & Spaces in 0.25 inch / 6.35mm increments The “Friction Washer” is not necessary to print. The…
A remix of @TaylorSteinf_1252185 QUICK-CLIP (GEN 3) to allow the attachment of 25mm webbing. Buy me a Coffee If you like this design and would like to support me, please consider buying me a coffee
Threaded FOXBAT Muzzle System SCAR, MEGA, MEGA XL muzzles or cosmetic muzzles just for the looks (screw barrel attachments directly onto the blaster) The Silly SCAR also fits and works with it if you use a 10" or 25,4cm aluminium barrel…
Really liked the original version of this, but when using the mirrored version you can't use a cable chain, so modified it so that there is a channel for the bed cables and a mount for the cable chain to attach to.
I had an existing quick release mount from my normal camera tripod. But i needed a quick release base on my small desk tripod for usage of a dslr as webcam. With the print i can attache the existing camera mount (ground is round about…
This attaches a standard 1" sidewalk chalk to a broom handle. I have printed this in both PLA and PETG. Prints without supports. You screw the nut on from the bottom. As the nut goes up it will increase the clamping force on the chalk.…
Thanks to Shaggyx86 | Printables.com for the original design. Original design: LC Fiber Cap by Shaggyx86 | Download free STL model | Printables.com This remix was designed with the intent of creating a fiber cap that cannot be lost.…
Rotary attachment for grinding the tang from frets Fits threaded foredom rotary tool from Stewmac, same threads as Dremel nose(3/4-12 thread) Hardware needed 2 - M2x5x10mm hex head bolts 2 - M2x5 nuts 1 - M3x14(or longer) 1 - M3 nut Use…
Heads-up: There's a new version of this: v2.3 — The only change in that remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. — Get it here:…
Doweling jig for 2x4s. Make sure the jig is clamped in place securely before drilling your holes. The example picture attached isn't the best because I had used a forstner bit and the dowel holes ended up not being straight. For best…
12-29-23 Tow hook and adapter to V1 12-30-23 Snow pusher 1-14-24 Full release All the grapple parts from the original can be used on my grapples this is the servo connector for my arms that the long version works great on both 2.0 and 3.0…
Printed with PLA. Position it vertically. Used tree supports The knob from this remix fits this drawer
Simple holder for my roller shutter 18 mm diameter crank. Works like a charm. Printed it in PETG, 100% infill.
Prints best with no supports on the face of the model furthest away from the 3/8'' wrench.
Inspired by Adam Knepper's design, I have designed this from scratch. All sizes in mm, except for the clamp which is ~1". Added diagonal supports making this version significantly stronger. Also reduced the diameter of the clamp slightly…
I needed an iPad Mini 6 stand that would work with a Spigen Ultra Hybrid Pro case, and also wanted it to have enough of an angle to where I could use the iPad on my desk. This one prints with no supports and holds the iPad firmly in…
This is a work in progress, feedback is welcome. The two CAD pictures are V3 and the other pictures are V2. V3 pictures coming soon. I made this with the intention of being able to attach different portable monitors to a “tough” laptop,…
Holders are derived from several existing models ( mostly from @Stefi and @Rainer ), just adding some potential improvements… Advice: Don't keep it long on hot sunlight unless You drive!
This model is compatible with the lego system.
This is a tool and nozzle holder for the Flashforge AD5M enclosure kit. It has been designed to fit to the far left corner and positioned to fit to the Standard Enclosure panel screw places. You will need to change the original M4 screws…
I've made a attachement for the roofrack on the Defender so it fits 2 1:10 scale Canadian canoe's. Because of the flexibility of the roofrack, you can still reach the pins on the top by tilting the canoe's to the side. If you print the…
Les attaches de reglettes Néon distribuées par les magasins de bricolage sont fragiles et cèdent facilement ou ne sont pas durables. J'ai dessiné les 3 pièces qui constituent une attache pour la refaire en partie ou totalement. Category:…
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
Remix of nice model with a shape to pass a flex to attache your cable
Petite attache pour accrocher la plante à son tuteur
Dyson V-8 Wall mounting bracket for attachments.
STEP file available → here Print recommendations I recommend printing the Handle and lightbar in PETG or ABS since the handle should be a strong part and the LED tends to get pretty warm (PLA is not recommended because tends to deform…
WARNING since last update X1 will heat up if there is a M3 command at the start of the G-code Who never thought: what if my 3D printer was a 2D printer ? All you need is a M6*40 bolt and a nut to go with it, simply put the nut in the…
*** Update 20th Mar'24: new option to add a 128x64 OLED in a wall. *** This project is for a 3D printed enclosure for a Network Attached Storage (NAS) device that uses a Raspberry Pi 4 using the Bullseye OS with two USB drives and running…
Recommended to print in 4 Walls, 20% infill in PETG to prevent breaks. Attaches to the top rail on the priming block using 2 M4 Socket head machine screws & nuts.
Hot Wheels Criss Cross Crash Support Track Snap-on Attacher This piece attaches the support column to the track. This piece snaps onto the support. It's not pretty, but it is functional and easy to print. Note that I have seen another…
Modified the badge to have a lanyard hanger attached.
Claw Hammer holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text. Works for any generic claw hammer from 16 to 20 oz This holder uses Multiconnect connectors. 2 of them is sufficient.…
A pair of stiletto heeled shoes for carbon 13 female model. (considering that it is such a drama attaching the ankle joint.... I have made extra ones with the joint already fixed. check the stl files....) I did not make them too pointy…
Parametric Funnel - Create pretty much any funnel size by changing a few parameters in Fusion 360. New to Fusion 360 or design software? Give it a go! This is easy and fun! And Fusion 360 is FREE for personal use. Example(s) attached.…
the original G26 holster, but with the clip attached
Kickstand Attachement for the Samsung Z Fold 4 Standing Case, you will need a separate kickstand that can fit in the slot, the one I used is "Kinizuxi " brand from Amazon and has the following dimensions: 15mm 63.5mm 4.35mm Can be either…
Allows you to mount Bosch 18V FlexiClick attachments to a wall. Notes: Depending on your preferences, you can choose to print it on the flat side without support or print it from the tool side with support. Printing it on the flat side…
Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.
A model of the hyoid bone that I sculpted in Blender over an afternoon. Due to the variability in hyoid morpholog, it is highly likely that this model is not representative of all subsets out there. I tried to be as accurate as i could to…
P X F Support GoPro 11 Mini ND
my first upload here on this platform this is a remix of many designs and add the ability to have a blobifier script in the front of a closed Voron Trident. I have a Reaper Head and it's working very well. you have to adjust into negative…
I made this because all the other models needed screws and nuts to attach the rail parts, so I just attached them so you do not need the screws and it is a little more accessible Category: 3D Printer Accessories
Do you own a CR-V 2017-2022? Do you have a large ice scraper like in the pictures? Does it get in your way all the time? Now you can easily store it out of the way and have easy access to it with these quick mounting brackets. The…
This is a filament feeder, with a magnetic attached filter. It will feed the filament through your enclosure and filter any dust or particles from it. The magnets hold the filter securely in place, but allow a quick filament change. The…
The only change in this remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. Major kudos to Ryan of V1 Engineering for releasing the LowRider v4 CNC ! This FluidDial CRADLE v2.3…
This is a simple but effective clip that connects two Gardena hose connectors – keeping your hoses joined and your setup organized. What makes it unique? It includes a loop for attaching a string or zip tie , so you can secure it to your…
I made this remote control holder attached to the frame of light switch (for the always misplaced blind's remote control) and because I didn't want to drill or glue to the wall with the previous original remote control holder. It works…
Deku's mask attached to the Dummy 13 torso!
This holder allows you to place your extension cord socket from the bottom of the table. The socket is attached by 3,5-4mm zip-tie. There is enough clearance even for bigger plugs/chargers. Pro tip: Print in black for gaming purposes. No…
3 formats : 100, 150 et 200mm pour tout attacher. Mettre un taux de remplissage de 100% pour plus de solidité. Pour faire plus long, on peut aussi les accoupler…
Captain America Shield. Nice and In perfect time to have printed out and Ready for those Avengers for Halloween. Post-Printing glue on magnets and enjoy. Category: 3D Printing
This is a handy organizer for the Kärcher SC1 steam cleaner attachments. It fits all the ones that come in the "permium version" and is suppesed to be pushed onto a 16mm thick shelv. Printed it upright @0.2mm with supports and 30% infill…
This is another option if you would like a Prusa style knob but have a fixed round knob that can't be removed. Simply place this knob over the original encoder knob. Works best with a mild adhesive like Elmer's Glue. Note, this design was…
A remix of MASE to use the USB → SATA adapter that i had laying around here. All that i did I just cut the front to hold the adapter and closed the side hole on the original design. Link SATA adapter 3.0 (choose 3.0 on the box) →…
PETG, 0.2 res. Has m4 thread for standard cabinet handles. Fusion design file also included. Happy printing.
MASE XL - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. This new XL version…
The hooks are pre-attached, so there's no need for superglue or additional assembly.
The title says it all. In the holder, the AirTag has about 0.5mm of space all around. If you'd like a tight fit, you can wrap it in a tiny bit of paper or similar. Printing should cause not problems as the parts are huge and have no…
This project is for a 3D printed enclosure for a Network Attached Storage (NAS) device that uses a Raspberry Pi 5 using the Bookworm OS with two USB drives and running the stable v7 version of the openmediavault software . The enclosure,…
LowRider v4 CNC - Buck Converter Tray for Ryan's (V1E) Jackpot CNC Control Box for the LowRider 4 CNC . A buck converter can be used to provide 12v to a 12v fan, even if your power supply is 24v. It can also be used to under-volt LED…
I have been spending a cold winter building an arcade unit. No style, lots of substance. Picked up a Spintrak arcade spinner for Arkanoid, Warlords, etc but did not want to drop the 70 USD for a stearing wheel accessory. Prints in three…
Hey Google/Alexa, turn on the lights ...... Rats. Someone turned off the light switch again! Light switch guard to the rescue??!! Can be printed without supports. Note: The magnets I've used are 9.7mm x 9.7mm x 1.7mm
A knob designed for the cover of resin printers, but it can probably be used for a lot more. Designed so that your dirty gloves do not touch the surface of the cover as for classic handle designs. Designed to be mounted onto the 40x40mm…
Bought a new vacuum and wanted to use an old attachment. So I made this model up. TBH - it took about 5 tries to get it right for such a simple model. I think I need to upgrade my calipers. Model was printed with .6mm nozzle and black…
Rod hanger in between walls for 28mm diameter rods.
Simple clamp for tube and screw. The basic model is for ¾" (20mm) tube and #10 wood screw (10mm width), but the design is provided as an openscad file, for it is configurable. The second model is for 11mm diameter cable (electrical…