Search results: tubes

Sort order

787 models

P
PrintablesTperroneDesign

Simple US Coin Tubes

These are simple US coin tubes to help organize loose change. Store your pennies, nickels, dimes and quarters. The dollar value is marked on the cap. I wanted to try a simple print without using excess material and print time. The walls…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
437
Likes
32
Rating
5
P
Printablesfiretech

Magnetic Quick Disconnect for MMU PTFE Tubes

I want to be able to easily remove my printer from my enclosure for maintenance. While the collets on the MMU3 make it quite easy to remove the PTFE tubes, I worry that it wears on the tubes and/or collets on every removal and insertion.…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
345
Likes
147
Rating
4.93
P
PrintablesStefan R

Joint Connectors for 12mm Tubes in JYSK Wardrobe / Verbinder für 12 mm Rohre

Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
343
Likes
47
Rating
0
P
PrintablesMatt

Stackable Stand for 1.5 ml and 0.5 ml Eppendorf Type Microcentrifuge Tubes

This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…

Print approx. €8.89–€10.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
63
Rating
0
P
PrintablesFrankyD80

Tubi der Zahnpastatubenquetscher - tubesqeezer

Zum ausquetschen der Tuben für z.B. Zahnpaste oder Creme.

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
15
Rating
5
P
Printableswerz 99

Edge Connector for square tubes

90° connector for square steeltubes 20 x 20 x 1,5 mm. 2 versions (90° and 45° miter).

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
15
Rating
0
P
PrintablesTernMaker

NMR Tube rack V2 (50 tubes, no support)

An upgraded version of the original 25-slot NMR tube holder , this new design accommodates 50 tubes and includes an anti-slip layer for added stability during use. Perfect for synthetic chemists and lab work! 🛠 Features: Holds 50 standard…

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
6
Rating
0
P
PrintablesDennis

EASYtoPRINT | PTFE Wall Mount 5 Tubes

Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
8
Rating
0
P
PrintablesBy_ISIK

Aquarium Shrimp Tubes

Aquarium Shrimp Tubes

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
12
Rating
0
P
PrintablesMetikumi

Inserts for Small Paint Tubes for LR2052 Storage Box System

Designed specifically for artists, these inserts for the LR2052 Storage Box System provide a perfect solution for organizing small paint tubes. Each insert is crafted to snugly fit and protect various brands of paint tubes, ensuring they…

Print approx. €3.34–€4.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
9
Rating
0
P
PrintablesAGGRC

Tube Rack for 1.5 and 5 mL Centrifuge Tubes

The centrifuge tube racks are specifically designed to accommodate both 1.5 mL microcentrifuge tubes and 5 mL centrifuge tubes, providing stability during solution handling and mixing. These models are integral to operations at AGGRC,…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
4
Rating
0
P
Printablesriethmueller

Flexible holder to fill cardboard tubes of different paper towels (e.g. kitchen towel)

I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
0
Rating
0
P
PrintablesJT3D

Gabarits pour assemblage de tubes - Tube assembly templates

Les fichiers Freecad sont fournis pour pouvoir modifier les dimensions des tubes.

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
2
Rating
0
P
PrintablesJoKa

Vortex attachment for falcons and microcentrifuge tubes

The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
PrintablesLine Arc Line

Join PTFE Tubes Together Magnetically!

This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…

Downloads
7,526
Likes
4,598
Rating
4.96
P
PrintablesCorsair

CORSAIR AIO Radiator Tubes Comb

A cable comb to help organize your AIO radiator tubes. For use with 11mm OD tubes. Comes in varying hose spacings of 5mm, 10mm, 15mm, and 20mm.

Downloads
4,171
Likes
1,190
Rating
4.87
P
PrintablesEverett Ramer

The Original Toothpaste Transfer Tubes

These connectors allow you to refill travel/trial-size toothpaste tubes, which are much smaller and prefect for travel and camping, from larger home-size tubes. The connectors are sized for the two most popular US brands of toothpaste:…

Downloads
3,623
Likes
726
Rating
4.97
P
PrintablesMarcelismus

Tube Squeezer / Tubenentleerer v2 (for metal tubes) - 40-85mm

A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…

Downloads
1,943
Likes
199
Rating
5
P
Printableskvlasblom

Spray can nozzle (fits 3mm or 4mm tubes)

The nozzle on the air freshener at work was missing so I did a quick design and print for a replacement one. It's not the most beautiful design, but it works well and I feel no reason at this time to make an improved version. I used…

Downloads
1,784
Likes
145
Rating
4.9
P
Printablessv7kwi

Flex tubes for testing TPU

Different flexible hoses for testing TPU. Print Settings Printer Brand: Creality Printer: Ender S1 Pro Rafts: No Supports: No All parts can be printed without supports. The short part is having some imperfections. Resolution: 0.2mm…

Downloads
1,428
Likes
81
Rating
4.79
P
Printablesasteven5

Shrimp Tubes (with / without feet) for Aquarium / Fish Tank

Shrimp tubes that provides a place for shrimps to hide in an aquarium (also a suitable hiding place for fry). Print instructions Two files available: -With feet, allows you to secure the tubes into the substrate (infill 10-15%) -Without…

Downloads
1,321
Likes
214
Rating
4.86
P
PrintablesMAKERTEAM®

Bambu A1 AMS Disconnect Tool for PTFE-Tubes

This little tool is a great help if you need to diconnect the PTFE tubes of your A1 (mini) AMS. Just put it around a tube, press it down and pull the tube out of the printers hose bracket as shown on the pics. Material: PLA/PETG…

Downloads
1,135
Likes
110
Rating
4.89
P
Printableseds_3d_shop

Eds French Cleat/wallmount Pliers and Crimper Holder/Organizer (for 10, 12 ,15, 16mm tubes and 15, 18mm FC bars, inkl .STEP)!

UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…

Downloads
1,057
Likes
129
Rating
4.8
P
Printablesclivebradshaw

Prusa MMU2 PTFE Tubes Separator

This is my rework of Prusa MMU2 PTFE Tubes Separator by fucosk https://www.thingiverse.com/thing:3166394 I just rounded off the corners a bit

Downloads
908
Likes
81
Rating
4.81
P
Printablesgringer

Poketubes - Pokemon Tube Holders

Holders for 15mL and 50mL falcon tubes, using low-poly Pokemon. This is a redesign from scratch in the same vein as PPF93's Pokemon Centrifuge Tube Holder. I remeshed flowalistik's low poly model(s) in Blender to make them compatible with…

Downloads
850
Likes
42
Rating
0
P
PrintablesEncrust3d

Aquarium Shrimp Tubes

Interlocked tubes for shrimp and fish to hide in. Scale down for smaller shrimp tubes and up for fish like bristlenose plecos. These are designed to have no infill. Print in PETG or ABS

Downloads
830
Likes
168
Rating
5
P
PrintablesSpamBouncer

Karcher / Kärcher WD-Series Adapter to 50mm hose / DN 50 tubes

In order to increase the suction power of my Kärcher WD 3.300 M (but should fit all Kärcher vacuum cleaners with standard hose like the WD3) workshop vacuum cleaner, it is possible to increase the hose diameter from the 38mm inside…

Downloads
773
Likes
89
Rating
3.8
P
PrintablesFinder_01

Labels PTFE- tubes

I constructed clips to label PTFE tubes on the MMU2s PTFE- Schlauch Beschriftung Ich habe Klipse konstruiert um PTFE- Schläuche an der MMU2s zu beschriften< Print instructions Prusament PLA

Downloads
763
Likes
150
Rating
4.71
P
PrintablesJacopo Tediosi

Tight PTFE Tube Clips - 2 to 8 Tubes - Original Prusa MMU3 Remix

I needed to align PTFE tubes in different quantities than the 5 of the original Prusa MMU3 clips. On Printables I found the PTFE tube clips by @Samotrel , which were close to what I needed, but they don't tighten the tubes enough and they…

Downloads
760
Likes
69
Rating
5
P
PrintablesRotziboiseur

Food Tube Holder - 4 / 6 / 8 tubes

This printable holder lets you store your food tubes (mustard, mayo, tomato paste…) upright and neatly organized. It comes in three sizes to fit different storage needs: 4 tubes – compact version, ideal for fridge doors 6 tubes –…

Downloads
663
Likes
302
Rating
5
P
Printableschris randell

Frozen Straw Ice Tubes

Simply fill the tubes with water , place the whole holder in your freezer and let them freeze solid. Once frozen, remove an ice tube and pop it into your glass. Add your straw through the centre of the tube and you've got a ready-made…

Downloads
627
Likes
352
Rating
1
P
PrintablesBen

M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets

I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…

Downloads
609
Likes
110
Rating
5
P
Printablesnpburns224

Toothpaste Squeezer for Wider Tubes + more

Modified the original model with the following changes: Elongated model to support toothpaste tubes up to 60mm wide Added stand to hold tube upright once it's short enough Added “fins” to help to squeeze the toothpaste more gradually for…

Downloads
595
Likes
64
Rating
4.91
P
Printablestrv

Remix: Prusa MMU2 PTFE Tubes Separator

I loved the PTFE separator from fucosk. [ https://www.thingiverse.com/thing:3166394 ] It held 5 tubes simply, was easy to print and looked good. I just wanted different configurations. Attached are variations of 2,3,4 & 6 tubes. (use…

Downloads
580
Likes
89
Rating
4.78
P
PrintablesAbdul Rehuman

Infinity Propagation Vase – Modern Hydroponic Test Tube Planter (25mm Tubes)

Bring elegance and greenery together with this Infinity Propagation Vase . Inspired by the infinity symbol, this modern planter combines clean geometric lines with functional plant propagation. The design securely holds two 25mm diameter…

Downloads
570
Likes
326
Rating
0
P
PrintablesSillybutts

Printed Plunger Tubes for 1.5"OD PT blasters

A set of fully printable plunger tubes! These plunger tubes are a fully printed design that fits in standard TCs, Caliburns, Lynxes, etc, without modification to the blaster ! So far, there are plunger tubes in these sizes: 1.5" OD…

Downloads
558
Likes
128
Rating
5
P
PrintablesRC builder

Primer filler for Dillon primer pickup tubes

Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…

Downloads
548
Likes
67
Rating
4
P
PrintablesSimple3D

RYOBI Rotary Tool Chop Saw for Cutting Rods and Tubes

I needed to cut some copper rods for a Yagi antenna I'm building. I found GreaseMonkey88's nice design and adapted it for my RYOBI rotary tool and IRWIN clamps. I need to make an arm that fits my RYOBI flexible Rotary Tool head. It's a…

Downloads
528
Likes
312
Rating
0
P
PrintablesKPTexan

Dillon Primer Pickup Tubes

Both small and large Dillon Primer pickup tubes: Small Primer tube = .183 ID x 5/16" OD Large Primer tube = .215 ID x 5/16" OD Note: Does not include the end fittings. Print instructions These are in 6" lengths, so use the 30mm long…

Downloads
521
Likes
59
Rating
0
P
PrintablesDan

Labels for MMU PTFE tubes

I needed an easy way to identify which PTFE tube was which so I created these slide on labels. Print face down. The newest version of PrusaSlicer asks to convert the numbers from imperial to metric. Not sure, why. Everything was designed…

Downloads
508
Likes
97
Rating
4.92
P

6 Spool Filament Dry Box Storage System with Bowden Tubes

Hi The 6 Spool Filament Dry Box Storage System is a combination of several individual projects. It can be printed with 6 rolls of filament at any time without having to go to the box. EDIT 08.04.18 I've changed the front holder a little.…

Downloads
486
Likes
92
Rating
0
P
PrintablesJuli4n_98

Cable Chain for PTFE Tubes and Cable for Anycubic Kobra 3 Combo

This is a remix. A cable chain for the PTFE tubes and the head cable for the Anycubic Kobra 3 Combo. I use it because my ACE Pro is on the floor under the table and the PTFE tubes have been extended to 2.5 m, which meant they were always…

Downloads
468
Likes
49
Rating
5
P
Printablesredaeq

Bambu Lab A1, Cable / Bowden / PTFE Tubes Collector Holder

Bambu Lab A1, Cable/PTFE Tubes Collector Holder To summarize, bundle the PTFE Tubes And also add one or more external Spools PTFE ….

Downloads
468
Likes
54
Rating
4
P
PrintablesMartin Jensen
Downloads
463
Likes
41
Rating
5
P
PrintablesJadozub

CarboPod - a lightweight and adjustable picatinny bipod made with CF tubes

I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…

Downloads
451
Likes
68
Rating
0
P
PrintablesMeister Edel

Bee Hotel !!!!DONT 3D PRINT THE TUBES!!!!

Dear Community!! !!!!!!!!PLEASE NEVER PRINT INSECT HOTELS TUBES!!!!!!! POTENTIAL HARM!!! When I thought about what I could contribute to this context I first started to inform myself about what is good and what is bad for the insects.…

Downloads
404
Likes
286
Rating
5
P
Printableshunderslash

Tubes for US coins (Penny, Nickel, Dime)

I recommend a layer height of at least .16 mm for these but .2 mm will probably work. US coins tend to vary in thickness a little but 99% of the time 50 (or 40 for nickels) will fit in a tube.

Downloads
403
Likes
35
Rating
3
P
PrintablesLayerCraft

Vierkantstopfen | Square plug square tubes

Vierkantstopfen 25mm für vierkant Stahlrohre | Square plug for square tubes with 25mm

Downloads
375
Likes
12
Rating
0
P
PrintablesAverageSauce

Clamp for 30mm tubes

This is a simple clamp for a 30mm tube, common measurement in fishing gear. I'ts designed to fit a square tube in the front but it could easily be modified to fit any kind of accessory. Uses an M5 bolt and nut for the fastening mechanism,…

Downloads
368
Likes
74
Rating
5
P
PrintablesMatthew B

Freezer Box Insert for 0.2 mL PCR Tubes & Tube Strips

These inserts are designed to fit in standard laboratory freezer boxes and should fit most 0.2 mL PCR tubes and PCR tube strips. The upper rack stacks on top of the lower rack with a little extra clearance for any PCR tubes already on the…

Downloads
362
Likes
59
Rating
5
P
PrintablesEimantas

Eppendorf tubes (1.5/2 ml, 0.5 ml, 0.2 ml) rack

Inspired by Jakub Věžník 's design of Eppendorf and PCR tube rack . Rack for 1.5/2 ml tubes fits up to 10 tubes, rack for 0.5 ml and 0.2 ml accommodates up to 12 and 18 tubes, respectively. Printed with PLA with no infill on Ender-3 S1 at…

Downloads
353
Likes
42
Rating
0
P
PrintablesMathias Kavai

Eppendorf and Falcon Tubes Holder

Just a simple stand that can hold up to eight 15mL falcon tubes, three 50mL falcon tubes or twenty four 2mL eppendorf tubes. Uses approximately 60g of PLA to print with 0% infill. I originally made the hex pattern to try to save some…

Downloads
338
Likes
34
Rating
0
P
PrintablesReedTiger

Arctic Liquid Freezer III AIO Radiator Tubes Comb

Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing

Downloads
337
Likes
32
Rating
5
P
Printablesmrplyuh

Полка для зубных щеток и тюбиков пасты. (shelf for toothbrushes and tubes of paste)

При нормально настроенном принтере модель печатается без поддержек

Downloads
316
Likes
34
Rating
0
P
PrintablesGp2mv3

Gardena micro-drip dripper (For 4.8mm tubes)

Small dripper or sprinkler (depending on the pressure in tube) for Gardena micro-drip systems. Print Settings Printer: Alfawise U20 Rafts: No Supports: No Resolution: 0.1 Category: Outdoor & Garden

Downloads
311
Likes
40
Rating
5
P
PrintablesMartinOs

Tubes for JohnT's Skadis zip tie holder

After printing the zip tie holder from JohnT ( https://www.printables.com/model/333050-zip-tie-holder-with-pvc-pipes-for-skadis ) I found out that (for me) the 32mm PVC tubes from the local DIY store didn't fit. Both the zip tie holder…

Downloads
310
Likes
104
Rating
4.67
P
PrintablesDavid Frey

Model Rocket 29mm Motor Mount Tubes

Model: Model Rocket 29mm Motor Mount Tubes Overview: These are motor mount tubes for BT60, BT65, BT70, and BT80 Estes body tubes. While the stock kit MMTs work well enough, there are not many out there that are designed for 29mm motors in…

Downloads
307
Likes
31
Rating
0
P
Printablesphistoeck

Drying rack wire repair clip (for 14mm tubes)

The original model didn't fit properly on my rack so I tweaked it. I made the overlap between the frame and the bar parametric so you can easily adapt the part to your needs. The fusion parameter is called “RACK_OVERLAP_WITH_BAR” Have fun…

Downloads
306
Likes
123
Rating
4.75
P

US and Euro Coin tubes

These tubes print nicely and are a great way to store you coins. I have tested all of the US coins but don't have any Euro coins to test with. They should be the correct size but let me know if you find one that needs changing. The caps…

Downloads
298
Likes
19
Rating
5
P
PrintablesOliver

Ultimate Bike Valve Stem Cap Collection for Bicycle Tires and Inner Tubes Presta, Schrader

Disclaimer I unfortunately don't have access to other types of valves as of right now. I will be looking into adding more in the future. Tested Print Settings Material: PLA+ Supports: None

Downloads
297
Likes
28
Rating
5
P
PrintablesWonder & Whimsy

Filament Rack Remix - Copper Tubes with Center Stand

I wanted to use some standard type M copper tube from the local hardware store and build a rather long version of this. The longer version necessitated a center stand because the copper tubes flexed too much. The center section is…

Downloads
278
Likes
46
Rating
5
P
PrintablesStarForge

Educational Model of Human Uterus with Ovaries and Fallopian Tubes StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
265
Likes
18
Rating
0
P
PrintablesSebastian

Bicycle RackStrap for 10mm Bike Rack Tubes

This is a strap holder for my racktime bicycle rack. It is a very small rack, originally designed for side luggage only, but sometimes I wanted to carry just something small like a rain jacket. The RackStrap also allows a combination with…

Downloads
265
Likes
127
Rating
5
P
PrintablesOlliemon

Arctic Cooling AIO Radiator Tubes Comb

A cable comb to help organize Arctic Cooling AIO radiator tubes. For use with 12.5mm OD tubes. I've only created one size and spacing for this, but it should be relatively easy to change if required.

Downloads
256
Likes
26
Rating
5
P
Printablesnolibert

Air System / Ventilation - Tee Piece for 100mm / 4 inch Tubes

Another make that came out of my air system, its a standard tee-piece. Printed with supports like shown in the picture, organics worked well for me.

Downloads
252
Likes
39
Rating
5
P
PrintablesLa Cave Au Chat

Guide clip to hold neatly two 4mm PTFE tubes together

Français en dessous :) __________________________________________ With this quick and easy to print part you can neatly route two 4mm PTFE tubes together. Very practical and easy to use. Gives a very nice look with our filament dryer and…

Downloads
246
Likes
17
Rating
0
P
PrintablesBen

Bucket hose mount for aquarium water change 12.7mm (1/2in) and 14mm outer diameter tubes

2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.

Downloads
243
Likes
57
Rating
5
P
PrintablesEma

Two Types of Twisty Tubes (circular) by DaveMakesStuff

Reupload from https://www.thingiverse.com/thing:4822701 DaveMakesStuff is a FANTASTIC creator! --- These print-in-place twisty tubes can be used as puzzles or just fun fidget toys. See here for video: https://youtu.be/_59nRTc5oJ8 See here…

Downloads
242
Likes
47
Rating
5
P
Printablesbart

Centrifuge adapters from 50 mL to 15 mL Falcon tubes and various glass vials

We have a centrifuge at work with a fixed rotor that takes 50 mL Falcon tubes. We also have a microcentrifuge that takes the small Eppendorf tubes (1.5 mL or whatever they are). But nothing in between and sometimes people want to…

Downloads
242
Likes
24
Rating
5
P
Printablesmodelitech3d

Bouchon 3D pratique pour tube de colle ou silicone – évite le séchage, se clipse facilement, imprimable sans support en une seule pièce, compatible avec la plupart des tubes standards – Modèle utile pour makers sur

🧴🛠 Bouchon 3D pour tube de silicone ou de colle – Simple, pratique et efficace ! Qui n’a jamais refermé un tube de silicone ou de colle en croisant les doigts pour qu’il ne sèche pas trop vite ? Moi aussi, ça m’est arrivé plus d’une fois.…

Downloads
239
Likes
14
Rating
0
P
PrintablesHonza

Acrylic Paint Tubes Holder

I made this simple but usefull holder for my set of acrylic paint tubes. It can hold up to 24 paint tubes, from behind there is space to put down your brushes and other things for painting models etc. The diameter of the holes is 12.5 mm…

Downloads
237
Likes
33
Rating
0

Clamp for cable tubes / Klemmschelle 20mm

Clamp for fixing a 20mm cable pipe (Installationsrohr, Panzerrohr, Kustoff-Stangenrohr) on walls or ceilings. There are two versions, one ordinary and one with support for a 10 mm c-profile-rail. Print instructions Use uv stable filament…

Downloads
234
Likes
26
Rating
5
P
PrintablesAlvomane

Tomahawk Slingshot Remix for 5mm Double Tubes | Tomahawk Katapult Remix für 5mm Doppelgummis

EN: This is a remix of Jacoza's comfy, thumb-supported Tomahawk Slingshot . Jacoza's design works with flat rubber bands. I needed a version for 5mm tubes and this is the result. In addition to the remix, the 3MF file also contains…

Downloads
232
Likes
30
Rating
5
P
PrintablesVSP

Mini benchtop centrifuge for PCR strips and tubes

In our genetics lab, we have a couple of small and simple centrifuges only to spin down PCR strips and tubes to remove droplets of liquid from the wall and cap of the tubes. When one of these broke, I realized how expensive these…

Downloads
228
Likes
140
Rating
0
P
Printablesdjaybakker

Eppistack - Stackable tube rack for 1.5 mL and PCR tubes

Best printed in PETG for ideal structural integrity during freezing - PLA can get very brittle when frozen. Works great at -20C, I have not tested at -80 yet. Optimal printing orientation is already loaded - requires bridging enabled Only…

Downloads
221
Likes
25
Rating
0
P
PrintablesMax Maker

Larger Hooks for the Ortlieb QL2.1 Bike Bags. If your bike has thicker bike rack tubes.

The standard hooks only work for very small bike racks with thin tubes. a lot of ebikes have thicker ones. Aparrently you cannot buy them in other sizes. So I made a model. The small one can also be used to replace the original, even if…

Downloads
221
Likes
35
Rating
5
P
PrintablesCameron

PTFE Tubing Clip - 2, 3 and 4 Tubes

Print settings: 0.20mm QUALITY Filament: PETG 20% infill

Downloads
220
Likes
32
Rating
5
P
PrintablesMauro Cossu
Downloads
216
Likes
25
Rating
5
P

ROG AIO Radiator Tubes Comb

CORSAIR AIO Radiator Tubes Comb 5mm radius/rayon

Downloads
215
Likes
21
Rating
5
P
PrintablesDavid Frey

Model Rocket 18mm Motor Mount Tubes with Retainers

These are Motor Mount Tube (MMT) assemblies for 18mm model rocket motors that will fit BT-50, BT-55, or BT-60 body tubes. I wanted to update my 18mm Motor Mount for BT-50 Model Rocket and decided to add the BT-55 and BT-60 as well. I…

Downloads
214
Likes
20
Rating
0
P
PrintablesSnobbyComa8

6mm Diameter x 2.75mm Thick Version of "Join PTFE Tubes Together Magnetically"

I made 2 changes to this model to suit my needs: I resized the magnet holes for 6mm diameter x 2.75mm thick magnets I removed the inner cylinder that (I think) was supposed to fit inside the PC4-M10 couplers. It didn't fit inside my…

Downloads
212
Likes
31
Rating
4.83
P
PrintablesVSP

Tennis Ball Feet for Van Rysel D100 Trainer (40.3 mm tubes)

My Decathlon Van Rysel D100 trainer has 40.3 diameter legs, so I had to remix the existing model. The hole is now 40.4 mm. With my printer/trainer it is a snug fit, but possible to insert without a mallet or hammer.

Downloads
208
Likes
10
Rating
0
P
Printablescompy

Better Anti-Drying Cap for Silicone Tubes

Description (English): This is a 3D model of a cap specifically designed for opened silicone tubes, aimed at preventing the material from drying or hardening. The cap screws directly onto the threaded neck of the tube and features an…

Downloads
203
Likes
12
Rating
5
P
PrintablesStep1makeart

Saw Guide Collar for cutting 1" , 1-1/8" , & 1-1/4" Bike Steerer Tubes

Saw Guide or Cut Guide collars for cutting bike steerer tubes down to size. Designed for Metal Steerer Tubes. Slightly undersized to ensure a tight fit on the steerer. Carbon Steerer Warning: Clamping anything on a carbon steerer tube…

Downloads
203
Likes
19
Rating
5
P
PrintablesToFe

Fun science: Nanotubes, fullerene and graphene

How to show the structure of some carbon structures to pupils? One option is to use 3D printed model :-). This set includes: nanotube(6,6), nanotube(8,3), nanotube(10,0), fullerene C60, graphene. The models carbon diameter is 10 mm (the…

Downloads
201
Likes
13
Rating
5
P
PrintablesGekoPrime

Golden Acrylic paint organizer storage rack tray for 2oz/59ml and 0.75oz/22ml metal paint tubes

This is a paint rack to store professional artist grade paint in an organized way. I use it to keep Golden Acrylic tubes organized in a drawer but I imagine it would fit other paints as well. Leave a comment if you need models generated…

Downloads
201
Likes
43
Rating
0
P
PrintablesJeffrey Lee

Staircase tube rack for 15mL and 50mL conical Falcon tubes

Staircase tube rack. Rows have differing elevation for easy access to each tube 2x6 15mL conical Falcon tubes, 2x5 50mL conical Falcon tubes. Holds a total of 22 tubes. No supports needed. Base is mostly hollowed out to decrease amount of…

Downloads
197
Likes
22
Rating
0
P
Printablesfaultedlogic

Ratchet Toothpaste Tube Squeezer remixed for U.S. Colgate Optic White 4.6oz plastic tubes

I remixed “Luke's 3D”'s awesome Ratchet toothpaste tube squeezer to work with U.S. Colgate Optic White 4.6oz tubes. I printed Luke's 3D's model yesterday, only to find it was 5mm shy of fitting my toothpaste. I wasn't sure that by…

Downloads
196
Likes
20
Rating
5
P
PrintablesH3dSprint

Tube connector to connect filament PTFE-tubes with an outer diameter 4mm

The connector is printed with flexible filament (Extrudr Semi-Soft) and do not need supports. To ensure good adhesion to the print bed, I recommend to use a brim.

Downloads
194
Likes
22
Rating
5
P
PrintablesPhat3R

Super Glue Nozzle For 3 Gram Tubes *Improved NO MORE LEAKS

********* UPDATE 28th March 2026 ******** New nozzle design that has a cone inside the threaded hole that punctures the glue tube and seals around the glue collar. This means no more glue leaking from the threads ... now makes a perfect…

Downloads
191
Likes
21
Rating
0
P
PrintablesCurlyVole

Microcentrifuge Tubes Rack 4x - straight or tilted

This rack was designed to hold a small batch of microcentrifuge tubes while working with them. Suitable for both the 1.5 mL and 2 mL versions. Should fit any tube with an outer diameter of 11 mm. The rack comes in a straight or a tilted…

Downloads
188
Likes
39
Rating
0
P
Printablesskot0189

Anycubic Kobra 3 Bowden tubes guide

Because original part broke into the pieces, I've measured the renemants and made the replacement part that is supposed to look similiar to the original. As the bowden tube clamp was in good shape i reused it. Model was made for my…

Downloads
187
Likes
11
Rating
5
P
PrintablesWhiteBULL

Drybox-Sockets for magnetically coupled PTFE Tubes

Requirements 3x 2x8mm round magnets 3x M3 bolds and nuts 2x PTFE quick coupler M10 (inside drybox is optional) PC4-M10 Note All Files contain just the 3D Object without any Print configuration . Make sure you insert the pause command on…

Downloads
181
Likes
63
Rating
3
P
Printableswolffm

Flat round cap cover for steeltubes

I designed this to prevent the open steel tubes on my DIY horizontal bar from collecting all the raindrops. It can easily be scaled into any other diameter with most slicers, just keep in mind that the wall thickness will scale as well.…

Downloads
178
Likes
5
Rating
0
P
PrintablesGuyH

Prusa XL Nextruder Nozzle size /type (0.25-0.8) for PTFE tubes

Simple dual colour print for a clip on nozzle size or type indicators. I just thought it helpful to label the tools on the printer and came up with this design in CAD. I then used the text tool in Prusaslicer to embed the text. You can…

Downloads
178
Likes
34
Rating
5
P
Printablesjameski

Jet-lift air collar for Matten filter uplift tubes

This jet-lift air collar implements well-established air-lift / jet-lift principles commonly used in Matten and sponge filtration systems, adapted specifically for 3D printing and home use . The design consists of two interlocking parts ,…

Downloads
175
Likes
20
Rating
0
P
PrintablesHonza

Acrylic paint tubes and brushes holder

Little display stand for 12ml acrylics paint tubes and place for brushes, markers, scalpel etc.

Downloads
175
Likes
32
Rating
5
P
PrintablesNakma07

Cyclone Dust Separator for 3 inches tubes

Most of models available for download are created for 2 ½ and 4 inches hoses and none of them is a parametric model. So I decided to create a dust separator that fits to 3 inches dust collector systems. It is a bit large, and maybe you…

Downloads
173
Likes
21
Rating
0
P
PrintablesStefan Huber

16x4 Rack for 1.5 or 2 mL Eppendorf Tubes

Printing costs per rack ~1.60 Euro.

Downloads
169
Likes
10
Rating
0
P
Printablesakamaka

MMU2S PTFE Tubes Spacers

Various spacers for MK3S+MMU2S to support PTFE tubes management.

Downloads
168
Likes
23
Rating
0