Cute Baby Velociraptor
This is a cute velociraptor figure. Easy to print and easy to paint. He likes long walks and classical music. You gotta watch for your fingers though.
- Downloads
- 3,019
- Likes
- 737
- Rating
- 4.92
932 models
This is a cute velociraptor figure. Easy to print and easy to paint. He likes long walks and classical music. You gotta watch for your fingers though.
A stamp wheel from the Fossil Skeleton #9 These digital 3D printable models are meant to create textures in clay, polymer clay, or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
A remix of Macroglossum's baby raptor model. To get the best results, either scale down the layer height (I use 0.10mm), or scale up the model (120% is a good size). I recommend PLA, although I'm sure PETG would work too. I like to use 0%…
What is more romantic/special then a personal (handwritten) message to a loved one? Use this envelope to deliver such message (or small gift) . The accompanying ones have an added decoration in the shape of a heart or rose as an…
Introducing the Flipper Zero WiFi Developer Case, meticulously crafted for seamless assembly with just a click and snap mechanism—no screws needed. The design ensures an astonishingly precise fit, marrying functionality with elegance in a…
I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…
supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack made this bc i couldn't find anything i liked online. I'm not super experienced so very uncertain about its strength. Installing is very simple all you need is a few zip ties…
I developed this repair clip as a remedy for your broken Levelor-branded vertical blind “vanes”. I was growing frustrated to find these vanes lying on the floor after randomly breaking at the attach holes. The vanes have a habit of…
Test de velocidad con la forma del circuito de Montmeló para que podáis poner a prueba vuestras máquinas. La idea es ver a qué velocidad empieza a mostrar peores resultados nuestras máquinas. IMPORTANTE: Es importante que conozcas tu…
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny Cute mini velociraptor 🦖✨ Part of my mini figurine series – small, detailed,…
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
It does make noise, you cover the right hole on the chamber and you blow.
I split this design into two cards, A & B, so it be printed with smaller build plates. No AMS/MMU is needed since it is a single-color print. The overall size of the velociraptor is about 145mm tall once assembled. Each piece is about…
Those brave souls who risk madness and worse to keep the web (mostly) organized and stylized. They deserve all of our thanks, but also perhaps just a bit of good-natured ribbing. Print this model and give the CSS guru in your life the…
A printable 3-layer foldable gift/money/message/postcard/foto envelope. Once printed, fold them around what you want to give and close with the printed lip. * For a version with an added rose or heart as decoration (also without text) see…
Aquí os dejo mi test de Curling que es una adaptación del que hizo McGybeer en su día y me pareció muy interesante. En este caso lo he modificado para tener voladizos de distintos tamaños y así poder evaluar más situaciones. Si queréis…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This project is a remix of the Valorant Velocity Karambit by MaitreLancelot on Thingiverse ( https://www.thingiverse.com/thing:5198504 ) This project was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot…
After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…
I drew up one of my containers of snus in order to practice my cad skills but also so that we can incorporate these plastic containers that would usually go to waste into our designs I'm not sure how useful the stl file is but the step…
Remix of the Zyn Tactical Snus Holder from @JacksonSediv_1247627 Fits a Velo can, but I don't know what other tins it might fit. Tactical Swedish Snus Holster for Velo's. Can be attatched on a Tool Belt or Pants. Does require supports,…
NOTE: This is very much a work in progress, I am still working on how best to divide this for better printing. I'm still not happy with the teeth and mouth and it will need some work to get to come out right (the small teeth will not want…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
Edit, 18. 6. 2026: Set the Model to free for all! Happy printing! If you want to support my work and see more FlexiDinos become a Club Member! Edit, 14. 8. 2026: Massively reconstructed the model, improved over all stability and joints,…
As a request to Dragon Props. I found these cool models over at the 3D Warehouse. Hope they were what you were looking for? Please show of the prints if and when do them. Cheers Jace Also a big thanks to Alex for providing this pic of his…
Very similar to the Popular T. rex Chicken Arms. Modified by adding another Finger/Claw and stretching the length and size of the arms to resemble the velociraptors from Jurassic Park/Jurassic World, but not too large that it hinders the…
Imagine your adventuring party goes into the caves in search of artifacts and discover a skeleton of some size. This is a miniature velociraptor skeleton placed on a 3x4 inch base with openlock attachments. Includes a base only version of…
Marble run tracks and tricks that mount onto any magnetic surface. I designed these with my kids as a project during the coronavirus lockdown. Make it your own by deciding which parts to print or even customizing the source openscad…
It is designed so that no support material is needed when printing, therefore it is an angle below the radius for easy print. Diameter: 40 and 45 mm Height: 55 mm Printet with PETG.
FINAL VERSION LINK Link to build plate adhesive that I use for reliable printing: TERRABIND X50 PLEASE LEAVE A COMMENT IF YOU HAVE A QUESTION OR IDEA FOR IMPROVEMENT. Video of Velora flying NOTES CG is marked on bottom of plane with an…
DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
sirve para mantener la velocidad en la moto
This model is compatible with the lego system.
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
Jurassic Park Velociraptor 3D model, sculpted by me in NoMad Sculpt. I recommend using a Resin Printer if you want to print the model.
Velocity Karambit from the new episode 4 battlepass from Valorant ! Scale to your needs, share your makes and i like trains . ''VALORANT VELOCITY KARAMBIT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by…
this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…
Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
In my research about exhaust and cooling fans these things work by normalizing turbulence created by the fan. When on the exhaust side air presses against the walls of the cone and eliminates the air from swirling back around the blades…
Česká verze Model legendárního českého tříkolového vozidla Velorex optimalizovaný pro FDM 3D tisk. Vhodný pro sestavení, vystavení i sbírku českých technických ikon. English A model of the iconic Czech Velorex three-wheeler optimized for…
Print both the letter sorter and the optional TPU foot pads in the orientation downloaded in. The pads are technically different so you'll need 2 of each, but 4 of the same would still functionally work.
Hi, bist du auf der Suche nach einem Toilettenpapierhalter und der Velociraptor ist zufällig dein Lieblingsdino, dann hab ich hier genau das richtige für dich ;) Wenn du außerdem ein Händchen für das bemalen von 3D-Drucken hast kannst du…
A basic clip for a Beeline Moto 2, which (supposedly) fits Velo 2 as well. Modify as reqired, F3D included… I didnt spend a gross amount of time doing it and it was done to best print on my printer which isnt tuned in the best. But i have…
Dinos are Awesome! This is a reupload! The original model by cleven was published more than 8 years ago and is not available on the original source anymore, I wanted to share it here and revived it. Printing Recommendations: 0.2 mm layer…
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
The Flexi Velociraptor is a playful and educational model, perfectly suited for beginners in 3D printing. The design incorporates interlocking segments, creating a flexible spine that allows the dinosaur to be posed in various positions.…
Upcycle your unwanted junk mail into useful envelopes! Or craft your own unique stationery out of old gift wraps, magazines or maps. Choose one of the templates and trace the shape using an ordinary pencil. The templates are available in…
**This post has spoilers for Shy Pluto and Terra Proxima.** Update October 5, 2026 : Today I added an alternative player tray that should better fit cards in Sleeve Kings sleeves. It has thinner walls to accommodate some extra width, but…
I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…
Embosser for envelopes. You just push it between hands, or against the table and it embosses the pattern well. To adjust the letters, use the Fusion 360 source file or STEP file. Some clearance is needed between positive and negative part…
This is a blank envelope model for remixing and creating your own envelope design. It doesn't require any glue. The folded dimensions of the envelope are 165 x 80 mm. It's the base envelope I made for the Eid envelope I uploaded a while…
I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…
The greatest creation of mankind is here. Finally, the L3. Behold the epitome of engineering ingenuity, the L3/33 defied all expectations through its simple mechanics, and a level of mobility that could only be described as "too fast for…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. I run mine in headless mode and will not be using either the camera slots or GPIO pins, so this remix changes that. You still need the base from the original. This remix…
Allow me to introduce you to an absolutely adorable dinosaur friend! When creating this little dino I made sure to make it super easy to 3D print which means it doesn't need any supports or even infill! Just download the file and bring…
Scientifically accurate model of a velociraptor. The model features high-poly feather texturing along the model. I created three variants of the model, standing, walking and sitting. I recommend printing it at a finer layer height or with…
Life sized Velociraptor skull!! MUST be printed with supports. Should fit on an Ender 3, or at least an Ender 3 S1. I recommend using lightning infill to save filament.
Envelope sealed with a heart for the Lego wreath. Prints in 2 pieces, just glue them together. Print face down, no supports. ** This is a remix of a stud from the “Lego Wreath” by MagnumDanger, attributions bellow. This model is the same…
Velociraptor dinosaur. Have fun
Edit 13.03.2023: Added slim version that is one part print. Stock fan is not really powerfull so improving it can only be a good thing right? I was quite surprised how much the stock part cooling fan on ender 3 pro is blowing air away…
See https://www.amazon.com/gp/product/B0811KLGDD/ref=ppx_yo_dt_b_search_asin_image
velociraptor with acoustic guitar
A 3d scanned velociraptor toy from jurassic park
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…
ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…
Fold sides of envelope and glue to top. I used wood glue. Folded envelope measures 3 5/8" (94 mm) x 6 ¾" (173 mm). Two files are attached. One file has no writing on top. Text can be altered in Tinkercad . Printed with You…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…
dev drum for 4x45 or 2x810 sand edges of the mouth for better sealing. You might need a pump to open the drum (same as jobo expert drum) for gear nozzle, you might need a 59*1.9 (outer diameter * cs) o-ring. tutorial V1.1 240428 Re-export…
I designed this velocity stack for a Bitaxe. This has increased my cooling by ~2C and lowered my fan RPMs by ~400. A velocity stack is designed to allow smooth and even entry of air at high velocities into the fan with the flow stream…
This is a velocity stack made to fit 45mm wide Borla Induction Series 2000 throttle bodies. Pictured are a set of 4 installed in my Mazda MX-5. The model is 60mm tall. With enough requests I could create different sizes as well. I printed…
If printed with the card boarder there will be some filament waste; but the nostalgia of these 3D puzzles are awesome!
I upgraded the fans on my Monoprice select mini from the cheap 30mm units to 40mm Noctua. I found a particularly nice design for a velocity stack for 40mm fans that I was going to print out, but discovered that it had a larger center hub…
constant velocity joint Gecik 1 x axe.stl 3 x biellette - PA.stl 3 x biellette - PB.stl 1 x butee.stl 13 x clip A.stl 1 x corps 3D.stl 1 x corps 3C.stl 1 x entr A.stl 1 x entr B.stl 1 x entr C.stl 1 x liaison 10 x 3.stl ( avec et sans…
This is 3D puzzle that Velociraptor. Since there are only a few parts, 3D printing time is short and assembly is easy. When 3D printing, it is convenient to use packaged STL models with all parts in one package. STL models are available…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
Happy printing! Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid layers: 4 *********************************************************************** All The Maker Chesmists (previously…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
This model is compatible with the lego system.
This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…
I split the trophy itself into sections so each can be printed with minimal or no supports and can then just be glued together meaning less waste and a cleaner looking end result I also extended the text to be the same thickness at the…
un plato para regar cualquier tipo de planta simpre que quepa y se puede hacer a altas velocidades.
remixed Photogad's Wall Mail Holder for Letters / Envelopes to remove screw holes since we stuck our mail holder to the wall above our keys with a command strip. Category: Organization
Developing 8 sheets of 4x5 film at a time. Print with PETCF for best performance. PLA is too crunchy PLA+/PETG/ABS are too soft ABS-CF should also work. Category: Camera
Hello. Here is continuation of my biggest project - building of Jawa-ČZ 250/353.02 Kývačka. Free 3D model of the bike is available here: https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame For today…
This model is compatible with the lego system.
IMPORTANT! Watch the slicing tutorial if you do not have a dual extruder or something similar! Description Cards that are roughly the size of the original Settlers of Catan resource cards. The cards, when printed in PLA, feel and handle…
Easy to make a cute Velociraptor keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
A print for the Cervelo S3 Specific Garmin mount. Printed in ABS with a 30% infill. Uses a small threaded brass insert that should be inserted using a soldering iron for best results. Please use thread locker on the single M3 bolt. Safety…
I had so much trouble printing the original trophy plaque, so I decided to design a simpler and more solid one, which is printable without MMU und supports. You can find the original trophy from OversizedHat here .
I'm a huge Jurassic Park fan. So I was very happy to find this printable of a velociraptor resonating chamber made by @nick041696_2583519 : https://www.printables.com/model/1099372-velociraptor-resonating-chamber This model is a stand for…
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I…
Very simple design but fuctional, resistent, elegant and easy to make.
Hope the 2nd part was fun for you :) https://www.printables.com/model/862690-sidecar-velorex-560-part-no2-connecting-rods As usual the model part consist a big parts but the very small also so pay attention to the description and attached…
i made a set of velocity stacks for 120mm fans. not sure the performance increase but they look half decent so i thought id share.