Wide woven basket
Wide woven basket, diameter 170 mm, height 80 mm. Printed with Prusament PLA without any supports. Sliced in PrusaSlicer 2.7.0. with Input Shaper.
- Downloads
- 2,616
- Likes
- 514
- Rating
- 4.78
2,351 models
Wide woven basket, diameter 170 mm, height 80 mm. Printed with Prusament PLA without any supports. Sliced in PrusaSlicer 2.7.0. with Input Shaper.
A stronger wide-mouth mason lid jar lid than I was able to find. Print Settings Printer: Qidi X-One 2 Rafts: No Supports: Yes Resolution: .016 Infill: 100 Filament: IIID PLA Grey Category: Kitchen & Dining
The included nozzle for my 2.25" Shop Vac has never been “just right” for vacuuming out a vehicle. It’s also been a little too narrow for my needs. I've been using it mainly for cleaning up my pellet grill, so I was in need of a “clean”…
Modular headphones holder with clamp for your desk or shelf. It has a large (detachable) support to avoid dents. I couldn't find any other design with similar characteristics here on PrusaPrinters, but after quite a lot of digging on…
This cleat fits perfectly in the wide opening of the lid. You can use it to attach things to the lid of your packout cases. Print with no suppports
This is a remix of Micke's Simple Sanding Block with Brainanator's cornering remix, plus my own remix of curved end. This will allow this sanding block to be useful for flat surfaces, inner corners and contours. I also shrink the model so…
Designed for use with the Hot Wheels RC cars Gives you a straight away that allows you to pass other racers without having to wait until they crash. Could also be used as a landing pad after a small ramp. If using the RC cars , use the “…
I struggled finding a holder which could take our kids Ipads due to the thick protection case, so I made this, which can take up to 26mm, should support most if not all covers/protection cases.
This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. This bin is wider than a normal bin on one side, use the extra space at the end of a Link rail or to fill a…
Holds a stack of wide mouth reusable lids for mason jars (not the rings and sealing lids for canning, it probably does hold them just fine but I designed this specifically for the reusable screw on lids that you'd use for like the fridge…
This is a wide bin for Harbor Freight Store House 20 Bin Portable Parts Storage Cases, Item # 93928, 15 Bin Case Item # 93929, and probably others. It can also be used standalone. I used Tinkercad's rounded cubes to make it. It has no…
The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…
Book riser with hexagonal pattern. Originally designed for 60cm Besta or 40cm Billy shelves. Printing instructions: 2 Perimeters 10% Infill 0.20mm layer hight or higher Even with the weight of a lot of books 10%infill is plenty to provide…
Print in colorFabb_XT Clear , which is FDA food contact compliant. Avoid using other liquids than water, this is to reduce exposure to bacteria.
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
A small adaption to the
My settings are provided in the .3mf file or .gcode. The main settings were: 0.4mm nozzle Overture PETG 4 perimeters 0.3mm Layer Height 25%/15% Cubic infill (more dense near load) Print two brackets per build plate (or 3 if you'll do two…
For 45lb power lifting/Olympic bars , or bars with 28mm+ shafts, use “Barbell rack holder - normal 29mm bar” For 15lb smaller/curl bars , use “Barbell rack holder - small curl bar.” The other mount will fit fine for these, but this one is…
This desk stand for your Pico has a wide base to give it stability, and uses the mounting slot on the remote to lock into place. There's a lot of chamfering for easy handling. Update 2024-01-29: I've added a new style that is slightly…
I was in need of a funnel where my oats would not get stuck so I printed this larger funnel. Upper diameter: 19cm lower diameter: 6cm
Komplement drawer divider A divider to divide 50 cm wide PAX Komplement drawers. The two pieces slot in place and are held together by the drawer. To print For a Prusa CORE One or similarly sized printarea place both pieces at a 45 degree…
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
Yet another Hobby Knive Cap. The ones I tried did not fit the wider blades I often use, so I decided to design this one. The wider shape also prevents the knive from rolling of the table. Print parameters: PETG layerhight 0,3mm print…
A 25mm diameter button in metric units. Flat face with a filleted rounded square shape and a wide ridge.
A 25mm diameter button in metric units. Flat face with a filleted edge and a wide ridge.
This version could used be for Foot or nub Control I widened shaft that supported antler levers and added end braces to sled framer Afterglow Controller for PS3. I redesigned the antler levers… but the idea is wider spacing for foot or…
Cleans the T-Slot on a milling table extension. T-slot size: Tee Width: .836", Tee Height: .365", Slot Width: .480 Used default slicer settings for PETG material.
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .670", Tee Height: .305", Slot Width: .420 Used default slicer settings for PETG material.
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
The bowl is sort of triangular so I pulled the back out to make it more oval. The westers47 remix was widened on the bed and printed (silver) and then deformed in blender to open the bowl cavity (white). I also pushed up the pallet…
This is a wider version of a scissoring mechanism designed by Richard Swika on thingiverse Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 30% pick material wisely, Pla may break at handle
You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt. The Grid is 14x10 and up to 8 height on the smaller drawer and…
This Most Popular Clay Texture Roller Set includes a collection of highly requested and widely used patterns. The 4 cm wide rollers allow you to cover larger surfaces quickly and create consistent textures with ease. Designed for easy…
More than just a morbid decoration, this bowl is designed to hold enough for a whole meal. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This should fit any wide mouth canning jar. If printed well, and well tightened, these lids are almost watertight (actually, they form a tighter seal than the commercially sold counterparts but not air tight. These are suitable for use in…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
This an remix of a great model with small improvements. It is a wide one Improvements: - parts fitting - front mesh done by triangular infill - bottom legs - like on Marshall devices - changed logo - tapered - added insert for 3 chambers…
I made this shelf to hold various kitchen things such as small bottles and powder jars but it's suitable to hold all kinds of things. If you want to store something heavy in it then try the thicker variant. The floors of the cells are…
Guitar holder for normal and for wide neck. Wall mount. There is also an amplified version added for heavier guitars, or if you have kids at home :) For guitar neck size 37mm (ukulele), 43mm (electric, narrow neck guitar) or 53mm…
A simple IKEA Skadis headphone holder, which is made for wider headsets. The width of the holder is 5 cm. Print with supports. PLA, 20% infill
This expands the usable diameter of the opening of the moon lamp base from <60mm to >70mm . I have included several adapters to fit two moon lamps as included below. Hopefully the screw thread bases make it easier to work the tolerances.…
Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for cable management Fits up to 45mm wide headphone bands Screw holes are 40mm apart center to center Max screw width 5mm Max screwhead width 10mm
A multi part Gridfinity baseplate that fits the drawers of the wide Ikea Alex unit perfectly. My main focus was to make it fit perfectly without much wiggle room while still being printable on a Prusa MK4 sized bed (25 cm x 21 cm). Print…
I wanted a tabletop printing press I could take with me to events for live printing and be big enough for me to actually print postcard sized prints. The gearbox gives a powerful 5:1 gear reduction while also remaining compact and…
Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…
There are 3 hip options included: Standard width flexible, wide flexible, and wide non-flexible. Shown in the photos is the wide flexible version.
The original design was great https://www.prusaprinters.org/prints/22608 but there is always room for improvement. The original designer, Tetralite, did his own update and made a version 3. https://www.prusaprinters.org/prints/74621 . I…
Requires: Wide Mouth Canning Jar (Mason Jar) with Lid Ring M4 x 20mm If you print the Back Hidden Screw file make sure you glue the front on first. Then put the knob on with the screw. Then glue that back. 04.21.2024 update. Added a new…
Stamp wheel from the Renaissance Collection #16 These digital 3D printable models are meant to be used to create textures in clay, polymer clay or EVA foam and other materials. We want to make more models like this. If you want to let us…
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
Gridfinity compatible Kitchen Powder Pack Organizer with variants for standard 65mm or up to 78mm wide powder packs , with layouts for 2x2x1.2 and 2x3x1.2 gridfinity units . Additionally there are variants with a slot for easy gripping ("…
See my improved version 2 here ! ---------------------- Here is a clever, sleek storage solution for a stand mixer’s attachments—each piece is suspended like a kitchen gadget display! All mount neatly under a shelf and ready for action,…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
Thank you Paul for the design!
This is a remix of https://www.thingiverse.com/thing:1147252 because it was very wide. My remix is 55mm wide exactly what I need for all of the toothpastes. Support You can support me by liking and downloading my projects or you can…
Title: Double Wide U-Turn - 3D Printable Wooden Train Tracks As a passionate 3D modeler with fond memories of playing with wooden train tracks growing up, I'm excited to share my collection of 3D printable train models. Inspired by my…
This is my take on a Gridfinity jumper wire holder. Each wire comb is 10 slots wide . The exact wire length can be adjusted by putting the combs into the slots of the base. Two wire bases are provided: One with grid size 2x3 , another…
wide-tooth comb with a short handle for convenient stowage in bags and compartments.
Needed a Tupperware (Snapware) Lid Holder with a low base to fit in our cabinets. Cuts down a bit on material and time to print too. Can place double sided tape or rubber feet under the plastic feet to help stop it from sliding on the…
ABS, PETG, PLA are OK. Better to have supports on overhangs of top & bottom shelves. As someone commented, i should clearly mention that top part is higher, than original. Beware: top part of this item is 132.6 mm in height!
A 10 inch rack mountable shelf that is designed to take advantage of the full width available inside the DeskPi RackMate . You will have to partially disassemble the rack and build around this shelf, or insert at an angle and pull into…
Remixed with the original tray for wider tray body making it easier to catch extrusion when hotend is at left most pos
UPDATE: You probably don't need to download this model. The original project (that this one is remixed from) now includes a double-wide drawer, along with a few other drawer types, as well as other new features. You should only use this…
The original concept by Zack Freedman: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins The more simple/basic version:…
Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.
This is a remix of https://www.printables.com/de/model/722500-enhanced-anti-drag-cable-holder-clip-for-elegoo-ne I simply wanted a wider version of the cable holder because I also wanted the fan cable inside the cable tray. So the tray is…
This is based on @Manuel's beautiful low poly ring design. I have bigger fingers, so I wanted a wider version of his ring. This is a quick ring to print. It takes me 15 minutes to print this ring on my Prusa i3 MK3s+. I've saved different…
This is a Remix of the Can Cover Version 2 by dalrmat. It is designed for people where the mouthpiece of the original Version is too small. Protect your drink from insects. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts:…
This is an ergonomic grip for the New 3DS XL. There is nothing obstructing the headphone jack, power button, stylus, game cartridge slot, or charging port. I have rather large hands and I designed it to fit my specifications. I've also…
Description This is a simple adaption of Tridense wall mounted headphone hanger to be used with an IKEA Skadis board. The hooks need support. The headset depicted in the image is the Logitech G Pro X, a moderately-sized gaming headset.…
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.
Feed your chickens with this Wide Mouth Ball Jar Chicken Feeder.
A screw-on funnel for standard wide mouth glass jars. Print funnel end on build plate, no support needed. Print in PET-G at 0.2mm
Perfect for Halloween-themed baking, crafting, and pottery! This set of spooky yet adorable stamp wheels and texture rollers helps you create patterns in clay and polymer clay, EVA foam, and other materials. The thin wheels create…
This Easy Print Piggy Bank is remixed from boniilloo's original as I needed the coin slot to be slightly wider to accomodate Australia's 50c piece, which measures around 32mm at its widest. This likely could have been accomplished by…
Update 3/31/23: Added version for Polaroid 600SE lenses. ---------- Update 1/18/2022: Made some improvements to the lens locking method for a much more secure shooting experience. The screw is now no longer a set screw, just a lock screw…
No Supports! Added more holes and increased size. Also added center cone to improve results.
Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…
Mod designed for Ender 3 NG You can see the build process in Armor3d Printing 's livestream. Check out his other videos too for more info about the E3NG and more! Printing Parts are already oriented properly for printing. No need for…
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
Modified the original model with the following changes: Elongated model to support toothpaste tubes up to 60mm wide Added stand to hold tube upright once it's short enough Added “fins” to help to squeeze the toothpaste more gradually for…
A four piece shower caddy tight snap fit. Printed on a Prusa taking full advantage of 250mm bed. Two sides options available, one with a hook to hold a razor on the side. printed with two layers and 15% infill it seems plenty strong in…
The original model did not have centered outlets on either side of the nozzle. I added 1.2mm. My MK4 is from November 2023 and using with improved fan door: https://www.printables.com/model/621424-improved-mk4-fan-door
UPDATE 29/01/2026 Added STEP files and updated the "Wide mouth with fin" model with 2 fillets. UPDATE 06/11/2025 Added models to fit 5015 fans with wide mouth, like the stock one. One model is basically as the stock housing but with…
Biegevorrichtung für Widerstände, Dioden, etc. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Filament: Anycubic PLA green Category: 3D Printing
This is the new and improved version of my previous mason jar lids that I made. This version needs NO supports, and it uses silicon seals that I bought off of amazon. Please reach out to me if you have any question and enjoy the print!…
Stop chips from getting in your T-slots with the Snap in T-Slot cover
Scale to ANY SIZE - it prints without supports! Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers. The Super Scooper Squared has an oversized grip based on user feedback. Original Super Scooper…
Stamp wheel from the Renaissance Collection #17 These digital 3D printable models are meant to be used to create textures in clay, polymer clay or EVA foam and other materials. We want to make more models like this. If you want to let us…
Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
I really like the sleek design of the Instax photo frame by Shared Objects . The orignal design only fits the Instax Mini, but Instax film is available in 3 formats, Instax Mini, Square and Wide. I remixed it to also fit the Instax Wide.…
designed this to be able to fit two cups of coffee at the same time. it's a 2-part print: 1. the main part which is the wide container 2. the top tray. printed for myself with “Voxelab” PETG-CF Marsala. for the widened tray I printed…